subsequent programming operation will fail (for unknown reasons).
Actually, this was really only required for ancient AVRs, but doesn't
hurt on mega and tiny devices.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@904 81a1dc3b-b13d-400b-aceb-764788c761c2
* jtagmkII_private.h: Add CMND_XMEGA_ERASE as well as
the various XMEGA_ERASE_* definitions (from updated
appnote AVR067)
* jtagmkII.c (jtagmkII_chip_erase): Correctly implement
Xmega chip erase based on CMND_XMEGA_ERASE.
* jtagmkII.c (jtagmkII_pre_write): Remove, this turned out
to be just a chip erase.
* jtagmkII.c (jtagmkII_program_disable): Don't try reading
"hfuse" for Xmega parts; they don't have it.
* main.c (main): Re-enable auto-erase. It's been done
before (as "jtagmkII_pre_write") in jtagmkII_paged_write()
anyway. Xmega boot and application flash areas should be
handled separately in the future, so auto_erase can only
affect the area just being programmed.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@903 81a1dc3b-b13d-400b-aceb-764788c761c2
to a standard a reset command assume it was in binmode
and attempt to exit to text mode first.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@901 81a1dc3b-b13d-400b-aceb-764788c761c2
level.
* buspirate.c: Fix Win32 build warning: include <malloc.h> to
to get a declaration for alloca().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@898 81a1dc3b-b13d-400b-aceb-764788c761c2
* usbasp.c: Change blocksize depending on sck frequency to avoid usb transmition timeouts.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@897 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c: Fix the "bad response to GO command:
RSP_ILLEGAL_EMULATOR_MODE" message. jtagmkII_close()
has been called with the wrong pgm->cookie. Wrap it
inside stk500v2_jtagmkII_close(), adjusting the cookie
data appropriately.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@895 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #7010: Win32 enhanced bitbang_delay
* bitbang.c (bitbang_calibrate_delay, bitbang_delay): On Win32,
use the high-resolution performance counter rather than the
uneducated delay loop guess if it is available on the target
hardware.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@894 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #27596: AT90s2333 is not correctly supported in avrdude.conf
* avrdude.conf.in (at90s2333): add various STK500v2 parameters.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@889 81a1dc3b-b13d-400b-aceb-764788c761c2
* par.c (par_close): use par_setmany() rather than par_setpin()
for PPI_AVR_BUFF.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@888 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c (stk500v2_dragon_isp_initpgm): Use
stk500v2_jtagmkII_setup/stk500v2_jtagmkII_rather than their
jtagII counterparts, to get the private data properly
initialized.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@887 81a1dc3b-b13d-400b-aceb-764788c761c2
by recent GCC versions).
* config_gram.y (parse_cmdbits): "brkt possibly used uninitialized"
(GCC errs here)
* jtagmkII.c (jtagmkII_reset32): "status possibly used uninitialized"
(I think GCC errs, too)
* buspirate.c: "pointers differ in signedness" (mismatch between
string processing and the use of "unsigned char" throughought the
AVRDUDE API)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@882 81a1dc3b-b13d-400b-aceb-764788c761c2
takes only 14 sec instead of almost 2 mins with the original
implementation.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@844 81a1dc3b-b13d-400b-aceb-764788c761c2
conditional compilation of usb_reset() introduced in r798.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@841 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #26527: bug in unicode conversion
* ser_avrdoper.c (convertUniToAscii): when encountering a UTF-16
character that cannot be converted to ASCII, increment the UTF-16
pointer anyway when proceeding.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@837 81a1dc3b-b13d-400b-aceb-764788c761c2
out of the chaining of both, the stk500v2 and the jtagmkII
programmers for some programming hardware (JTAG ICE mkII and AVR
Dragon running in ISP, HVSP or PP mode), where both programmers
have to maintain their private programmer data.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@834 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf.in (atmega163): fill in stk500v2 parameters, correct
some flash programming parameters as well.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@827 81a1dc3b-b13d-400b-aceb-764788c761c2
* ser_posix.c (ser_setspeed): Don't pass TCSAFLUSH to tcsetattr() as
it apparently fails to work on Solaris. After reading the
documentation again, it seems TCSAFLUSH and TCSANOW are indeed
mutually exclusive.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@826 81a1dc3b-b13d-400b-aceb-764788c761c2
* ser_win32.c (ser_open): prepend \\.\ to any COM port name, so it is
safe to be used for COM ports above 9.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@825 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500generic.c: Implement setup and teardown hooks, calling in turn
the respective hooks of the stk500v2 implementation.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@824 81a1dc3b-b13d-400b-aceb-764788c761c2
* main.c (usage): add a version number display to the default usage
message.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@823 81a1dc3b-b13d-400b-aceb-764788c761c2
support it
Do not call pgm->perform_osccal() unless it is != 0.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@822 81a1dc3b-b13d-400b-aceb-764788c761c2
* update.c (parse_op): correctly \0-terminate buf after filling
it, before it is potentially used as the source of a call to
strlen or strcpy.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@819 81a1dc3b-b13d-400b-aceb-764788c761c2
* fileio.c: Do not close the input/output stream when working on an
stdio stream.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@816 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf.in (ATxmega256A3): new device.
* stk500v2 (stk500v2_initialize): Enable the AVRISPmkII as a
PDI-capable device for ATxmega parts.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@809 81a1dc3b-b13d-400b-aceb-764788c761c2
it is not useful for anything else but the CLI frontend.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@806 81a1dc3b-b13d-400b-aceb-764788c761c2
* avr.h: Remove stray semicolon.
* configure.ac: Add check for predefined types uint_t and ulong_t.
* confwin.c: Include "avrdude.h" on top to avoid empty translation
unit warning.
* ppwin.c: (Ditto.)
* ser_win32.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* jtagmkII.c (jtagmkII_recv): remove unreachable "return".
* stk500.c (stk500_initialize): (Ditto.)
* par.c: Test for both, __sun__ and __sun to see whether we are
being compiled on Solaris.
* ppi.c: (Ditto.)
* stk500v2.c: Implement the DEBUG and DEBUGRECV macros in a way
that is compatible with the ISO C99 standard.
* usbtiny.c: Only typedef uint_t and ulong_t if they have not
been found already by the autoconf checks.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@804 81a1dc3b-b13d-400b-aceb-764788c761c2
connect
* configure.ac: Add checks for gethostent() and socket().
While being here, remove some old cruft left from ancient days.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@803 81a1dc3b-b13d-400b-aceb-764788c761c2
by return -1. exit(1) from a library function is not going to make
many friends upstream (in particular the day someone uses that as
part of a GUI frontend).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@800 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6749: make reading from the USBtinyISP programmer more robust
Add code to retry failed communication attempts.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@799 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #22271: usb_reset in usb_libusb.c not necessary in FreeBSD 6.x
* usb_libusb.c (usbdev_close): Do not call usb_reset() on FreeBSD.
It is not necessary there.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@798 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #24749: add support for '328p
* avrdude.conf.in (ATmega328P): new device support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@796 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6261: avrdude won't use dragon/debugwire to write a file
to eeprom
* jtagmkII.c (jtagmkII_paged_write): when in debugWire mode,
implement a paged write to EEPROM as a series of byte writes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@792 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6542: paged_load fails on the MIB510 programming board
* stk500.c: Add a workaround for the different signon sequence on
MIB510 programmers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@791 81a1dc3b-b13d-400b-aceb-764788c761c2
* usbtiny.c (usbtiny_cmd): Replace sizeof() by a fixed constant
4 for the result array, because otherwise it would take the size
of a pointer which miserably fails on 64-bit machines.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@787 81a1dc3b-b13d-400b-aceb-764788c761c2
* ppiwin.c (ppi_open): If the port parameter passed from the
-p option is neither lpt1/2/3, try interpreting it directly as
a base address.
* avrdude.1: Document the change.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@786 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c (stk500v2_chip_erase,stk500hv_chip_erase): Return
the expected 0 for success rather than a protocol-dependant
number.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@785 81a1dc3b-b13d-400b-aceb-764788c761c2
Do not erase the chip if both, -e and -n options have
been specified.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@784 81a1dc3b-b13d-400b-aceb-764788c761c2
Uncomment the correct, and delete the wrong signature for
AT90USB646/647. Alas, the datasheet has never been corrected for
years.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@782 81a1dc3b-b13d-400b-aceb-764788c761c2
mkII (or AVR Dragon) in ISP mode. The wrong set of per-programmer
private data had been allocated (stk500v2 vs. jtagmkII) which was too
small to hold the actual data.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@781 81a1dc3b-b13d-400b-aceb-764788c761c2
for Xmega programming using the JTAG ICE mkII in JTAG mode.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@780 81a1dc3b-b13d-400b-aceb-764788c761c2
allow to continue with -F if it failed yet do not attempt to
perform anything on the device itself. That way, -tF could be
specified for programmers like the STK500/STK600 even without a
device connected, just in order to allow changing parameters on
the programmer itself.
* avrdude.1: Document that possible use of the -F option.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@779 81a1dc3b-b13d-400b-aceb-764788c761c2
of the number of bytes to be written which caused a malloc chunk
corruption.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@778 81a1dc3b-b13d-400b-aceb-764788c761c2
PDI mode of the STK600 is supported. Single-byte EEPROM
(and flash) updates do not work yet.
* avr.c: "boot" memory is a candidate memory region for paged
operations, besides "flash" and "eeprom".
* avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD
* avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish
ATxmega parts from classic AVRs), the nvm_base part field, and
the offset field for a memory region.
* config_gram.y: add "has_pdi", "nvm_base", and "offset"
* lexer.l: (Ditto.)
* main.c: disable auto_erase for ATxmega parts
* stk500v2.c: implement the XPROG functionality, and divert to
this for ATxmega parts
* avrdude.1: Document the changes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@777 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6501: New autotools support for avrdude
* Makefile.am: add @WINDOWS_DIRS@ to SUBDIR
* bootstrap: allow for autconf-2.61 and automake-1.10, too
* configure.ac: fix @WINDOWS_DIRS@ recursion, replace
AC_PROG_CC by AM_PROG_CC_C_O, for esoteric reasons
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@774 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6074: added support for crossbow's MIB510 programmer
* avrdude.conf.in: Add entry for mib510.
* stk500.c: Add special hooks to handle the MIB510 programmer.
It mostly talks STK500v1 protocol but has a special hello and
goodbye sequence, and uses a fixed block size of 256 bytes.
* doc/avrdude.texi: Document support for mib510.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@773 81a1dc3b-b13d-400b-aceb-764788c761c2
Add check for buffermode feature, and use it if present. Can be
turned off using -x no_blockmode.
* avr910.c: Implement buffermode test and usage.
* avrdude.1: Document -x no_blockmode.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@771 81a1dc3b-b13d-400b-aceb-764788c761c2
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82. Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto. Added a new chapter for
Programmer Specific Information.
Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
and turn stderr into unbuffered output while producing the
progress report.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@765 81a1dc3b-b13d-400b-aceb-764788c761c2
definition. If present, call the setup hook immediately after finding
the respective programmer object, and schedule the teardown hook to be
called upon exit. This allows the programmer implementation to
dynamically allocate private programmer data.
avr910.c, butterfly.c, jtagmkI.c, jtagmkII.c, stk500v2.c, usbasp.c,
usbtiny.c: Convert static programmer data into dynamically allocated
data.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@764 81a1dc3b-b13d-400b-aceb-764788c761c2
the programmer backend.
jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.
avrdude.1, doc/avrdude.texi: Document all of the above.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #5007: Patch for line-buffering of stdout and stderr
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@757 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6121: ISP support for the C2N232I device (serial port
bitbanging)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@755 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6141: accept binary format immediate values
Detect a 0b prefix, and call strtoul() differently in that case.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@754 81a1dc3b-b13d-400b-aceb-764788c761c2
In ser_recv(): Drop the essentially unused variable "len", and use the
variable "read" in order to track how many bytes have just been read
in.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@753 81a1dc3b-b13d-400b-aceb-764788c761c2
Add definitions for the ATmega329P/3290P. Same as ATmega329/3290
except of the different signature.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@752 81a1dc3b-b13d-400b-aceb-764788c761c2
using default configuration file.
Uncomment the (bogus) stk500_devcode lines for the ATmega164P,
ATmega324P, ATmega644, and ATmega644P definitions. This only affects
users of STK500v1 firmware.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@750 81a1dc3b-b13d-400b-aceb-764788c761c2
"BOOT"-type code, while the standard codes are different (usually one
below).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@740 81a1dc3b-b13d-400b-aceb-764788c761c2
paged_write backend functions iff the memory area in question has
a page_size != 0.
This is supposed to fix bug #19234: avrdude-5.3.1 segfaults when
stk500v1 tries to program an ATtiny15
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@739 81a1dc3b-b13d-400b-aceb-764788c761c2
resp. Add an entry for the ATmega644P.
Fixes bug #19769: ATmega164p not recognized
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@737 81a1dc3b-b13d-400b-aceb-764788c761c2
something to the serial line. That kind of polling isn't very useful
anyway, and it seems it breaks for the Linux CP210x USB<->RS-232
bridge driver which is certainly a bug in the driver, but we can just
avoid that bug alltogether.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@736 81a1dc3b-b13d-400b-aceb-764788c761c2
ATmega640/1280/1281/2560/2561. Atmel has changed the XML
files after the initial release.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@735 81a1dc3b-b13d-400b-aceb-764788c761c2
*Problem in verbose output of previous commit. I hoped to
have all the verbose changes in a single commit, but that
won't happen...
*Main thing is fixed safemode to turn itself off when you can't
read the fuses anyway. I don't know what I was thinking when
I made it fail out of programmers that don't support fuse reading.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@733 81a1dc3b-b13d-400b-aceb-764788c761c2
include the documentation into the tarball even if the configure had been
run without the --enable-doc.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@726 81a1dc3b-b13d-400b-aceb-764788c761c2
own (duplicate) copy of it.
other files: Constify char pointers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@725 81a1dc3b-b13d-400b-aceb-764788c761c2
list_parts() and list_programmers() functions into general list
iteration functions that call a caller-supplied callback for each
element. Implement list_parts() and list_programmers() as private
functions in main.c based on that approach.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@724 81a1dc3b-b13d-400b-aceb-764788c761c2
and link main.c against that library.
Add AC_PROG_RANLIB to configure.ac as we are building a library now.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@723 81a1dc3b-b13d-400b-aceb-764788c761c2
- Make all internal functions "static".
- Make sure each module's header and implementation file match.
- Remove all library-like functionality from main.c, so only
the actual frontend remains in main.c.
- Add C++ brackets to all header files.
That effectively leaves the various module C files as something like
an "avrdude library", with main.c being the currently only frontend
program for that library. In theory, it should be possible to write
different frontends using the same library backend functions though.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@722 81a1dc3b-b13d-400b-aceb-764788c761c2
declarations in each file by a central header file "avrdude.h".
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
and EEPROM, based on the current Atmel XML file.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@720 81a1dc3b-b13d-400b-aceb-764788c761c2
and the presence of the header ddk/hidsdi.h. It now works
correctly under Cygwin and several flavours of MinGW.
* Makefile.am: Add new LIBHID pattern.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@719 81a1dc3b-b13d-400b-aceb-764788c761c2
command (which is ignored by current AVR109 bootloaders),
send the first reply from the list of supported device
codes back rather than using avrdude.conf's idea about
an AVR910 device code. Apparently, this solves disagreements
between different versions of at least the ATmega8 AVR910
device code.
Closes bug #18727: Writing flash failed
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@718 81a1dc3b-b13d-400b-aceb-764788c761c2
Change HVSP reset timing for ATtiny25/45/85 from
500 microseconds to 1 ms, matching the most recent Atmel XML
specs.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@717 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf.in (frank-stk200): Fix syntax error.
* ser_avrdoper.c: Make #ifdef for Win32/libhid
consistent with the initial check: use the HID driver
only iff found, otherwise use libusb.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@712 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf.in (frank-stk200): New programmer added.
Closes patch #5502: one other programmer
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@706 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #5507: Support for AVR-Doper USB programmer in HID mode
* configure.ac: Add hooks to detect the Win32 HID library,
as well as the existence of <ddk/hidsdi.h>.
* Makefile.am: Add new files.
* my_ddk_hidsdi.h: (New file.)
* ser_avrdoper.c: (New file.)
* serial.h: Add declaration for avrdoper_serdev.
* stk500v2.c: Add hook to divert to the AVR Doper code.
* avrdude.1: Document the AVR Doper support.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@704 81a1dc3b-b13d-400b-aceb-764788c761c2
usleep(1000000) that accidentally crept in in rev 1.19.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@702 81a1dc3b-b13d-400b-aceb-764788c761c2
value in case we had changed it.
Fixes bug #18262: JTAGMKI/JTAG1 Reset Bug
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@699 81a1dc3b-b13d-400b-aceb-764788c761c2
fallback from each programmer's paged_load() or paged_write()
method, respectively. The return value needs to be checked for
being greater or equal than 0 rather equal to 0 in order to
assume the operation has been successful.
Fixes bug #18489: avrdude is too slow (20 byte/s)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@695 81a1dc3b-b13d-400b-aceb-764788c761c2
- declare a dummy "struct timezone" for some Win32 systems (MinGW)
- fix a few printf() argument types
- get rid off the prevailing "all filedescriptors are of type int"
attitude
The last item required a large sweep across the code, in order to
replace all "int fd"s by "struct filedescriptor *fd"s, and pass
pointers (as we cannot pass a union directly). In return, the
code is now supposed to be fully 64-bit safe, rather than relying
on a 64-bit pointer being converted to a (32-bit) int and back
to a pointer as we did previously.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@694 81a1dc3b-b13d-400b-aceb-764788c761c2
upon failure now that the upper layers won't fall back to the cmd()
method anymore in that case.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@691 81a1dc3b-b13d-400b-aceb-764788c761c2
(according to the XML files).
Add an XSL stylesheet to extract the dW
parameters from the XML files.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@690 81a1dc3b-b13d-400b-aceb-764788c761c2
imposed by debugWire itself, so effectively, only flash ROM can be
read and written.
Currently, the required changes to avrdude.conf.in are only present
for the ATtiny44.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@688 81a1dc3b-b13d-400b-aceb-764788c761c2
avr_read_byte_default() and avr_write_byte_default (resp.) by directly
calling the latter functions from within all programmers that don't
implement their own read_byte()/write_byte() methods. In turn, make the
read_byte() and write_byte() methods mandatory, and the cmd() method
(direct ISP command) optional instead (it's effectively mandatory for
any programmer using avr_read_byte_default()/avr_write_byte_default()
though). Remove all the pointless cmd() method stubs from those programmers
that don't need it.
Eliminate avr_read_byte() as it was now completely identical to
pgm->read_byte().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@684 81a1dc3b-b13d-400b-aceb-764788c761c2
when closing the connection. They cause the activity LED on the ICE
to continue to flicker, and are not necessary anyway (the target
starts to run by itself when leaving programmng mode).
This is a partial fix for bug #18262: JTAGMKI/JTAG1 Reset Bug
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@683 81a1dc3b-b13d-400b-aceb-764788c761c2
that indicates whether the underlying communication can dynamically
change its speed or not. This flag is set for true serial
communication but clear for USB communication. Don't try to adjust
the speed when talking over a communication channel that doesn't
support it. (The Dragon does not even support the respective
parameter.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@676 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500.c (stk500_paged_write): Send the command and the data
payload within a single write().
patch #5025: Improve stk500.c robustness
Submitted by Matthias Ringwald:
* stk500.c (stk500_open): do not flush the serial line after
getting in sync with the programmer.
patch #5293: stk500.c: no drain after sync (-> allow BTnode
Bootloader to work on cygwin)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@670 81a1dc3b-b13d-400b-aceb-764788c761c2
Add the CoreFoundation and IOKit framework linker flags on MacOS X
when configuring for USB support.
patch #4685: Libusb on MacOS X: detection and additional includes
Thanks to Matthias Ringwald for testing the reworked patch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@666 81a1dc3b-b13d-400b-aceb-764788c761c2
device codes, allow the user to override the device code
verification with the -F option.
* main.c: Make ovsigck a global variable.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@665 81a1dc3b-b13d-400b-aceb-764788c761c2
either firmware version 1 or 2.
* Makefile.am (avrdude_SOURCES): add the new files
stk500generic.c and stk500generic.h.
* avrdude.conf.in: Add the stk500generic programmer type, and
change the "stk500" entry to point to this programmer.
* config_gram.y: Add the stk500generic keyword.
* lexer.l: (Ditto.)
* stk500.c: Change the stk500v1 code to not call exit()
prematurely when failing to open the programmer, but instead
return an error status.
* stk500generic.c: (New file.) Stub programmer implementation.
Probe for either stk500v1 or stk500v2, and adjust the current pgm
appropriately.
* stk500generic.h: (New file.) Declare the public interface(s)
of stk500generic.c.
* doc/avrdude.texi: Document the changed behaviour of stk500.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@663 81a1dc3b-b13d-400b-aceb-764788c761c2
AT90S1200 and the AT90S8515, fuse bit handling via ISP, and lock bit
reading via ISP are not supported at all. For the AT90S4414 (small
brother of the AT90S8515), add the ability to write the lock bits, and
add a definition for the fuse bits (usable for HV programming). For
the AT90S2313, add the "fuse" memory range, so it's available for HV
programming.
Resolves bug #17796: avrdude will not program or verify lockbits with
Atmel STK protocol programmers
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@662 81a1dc3b-b13d-400b-aceb-764788c761c2
* usbasp.c: Check for USBasp with new as well as old VID/PID
pair, warn the user about upgrading the firmware in case an
old one has been found.
* usbasp.h: Add new VID/PID.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@661 81a1dc3b-b13d-400b-aceb-764788c761c2
. high fuse has 8 bits
. there is an extended fuse (just one bit)
. the calibration area is only 1 byte
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@660 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4686: Add support for USBasp, a simple USB programmer
* usbasp.c: New file, implement the USBasp driver.
* usbasp.h: New file, interface declarations for USBasp.
* Makefile.am: Wire the new files into the build.
* avrdude.conf.in: Add the usbasp programmer entry.
* config_gram.y: Add the usbasp token.
* lexer.l: (Ditto.)
* avrdude.1: Document the USBasp programmer.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@656 81a1dc3b-b13d-400b-aceb-764788c761c2
and binary numbers.
Closes bug #16129: more output formats for fuse bits (avrdude
enhancement request)
* fileio.c: Implement fileio_num() and the itoa_simple() helper function.
* fileio.h: Add new file formats to FILEFMT.
* main.c: Parse the new file formats.
* avrdude.1: Document all this.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@654 81a1dc3b-b13d-400b-aceb-764788c761c2
requires the user to eventually restart AVRDUE from scratch then.
jtagmkII_reset() had to get a second parameter in order to record
the reset mode.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@647 81a1dc3b-b13d-400b-aceb-764788c761c2
Idea taken from patch #3172: Adds date and time of compile to usage
message
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@642 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4372: Better synchronization for stk500
Sync three times, and drop any noise inbetween.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@641 81a1dc3b-b13d-400b-aceb-764788c761c2
the old AVR910 device codes; we've got signature verification
now so better rely on that.
* avr910.c: Revert the signature bytes returned, as it already
happened in butterfly.c. This closes bug #14998: Signature Bytes
read in wrong order (avr910 mode)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@638 81a1dc3b-b13d-400b-aceb-764788c761c2
<andyw@pobox.com>.
Implements patch #4635: Add support for terminal/console servers for
serial programmers
* ser_posix.c: Add net_open(), and divert to it for net:host:port.
* ser_win32.c: Recognize net:host:port, and bail out.
* avrdude.1: Document the net:host:port connection option.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@635 81a1dc3b-b13d-400b-aceb-764788c761c2
Wait for the device's response after sending an "E" command.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@634 81a1dc3b-b13d-400b-aceb-764788c761c2
DB9 connector, and fix some related bugs in serbb_posix.c.
Closes bug #16265: dasa2 does not work under posix
* avrdude.conf.in: New serbb pin numbering; added "siprog"
as an alias for "ponyser".
* serbb_posix.c: New pin numbering, fix some confusion.
* serbb_win32.c: New pin numbering.
The generic and Posix-related parts of these changes have
been contributed by Hanns-Konrad Unger
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@631 81a1dc3b-b13d-400b-aceb-764788c761c2
possible to extend them for other programmers than PPI now (serbb,
stk500*).
* pgm.h: Keep the exit specs in an abstract form inside struct
programmer_t. (Should be moved out into some programmer-specific
structure.) Rename the getexitspecs() method into
parseexitspecs().
* main.c: Move the exit specs stuff out to the programmer
implementation.
* par.c: Implement the new exit spec handling. Everything is now
done using the generic abstraction layer.
Closes bug #16443: No disable Resetsignal at the end of
Programming Session
Obviates need for patch #5057: quick and dirty Hack to unset Reset
after Programming
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@629 81a1dc3b-b13d-400b-aceb-764788c761c2
via the patch tracking system.
patch #5096: Allow VCC and BUFF to be any pin in parallel mode
* config_gram.y: Release the restriction to PPIDATA pins.
* par.c: Rework the code to introduce a function par_setmany()
that builds on top of par_setpin(), and use that function for the
PPI_AVR_VCC and PPI_AVR_BUFF pin collections. This also abstracts
the polarity of these signals appropriately.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@628 81a1dc3b-b13d-400b-aceb-764788c761c2
Open the serial port with O_NONBLOCK, and save and restore the port
state before exiting.
patch #5008: Patch for (5.1) ser_posix.c for O_NONBLOCK open and
restoring serial port state on close
Closes bug #12622: avrdude hangs on macosx/darwin with PL-2303
usb-to-serial and Butterfly
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@627 81a1dc3b-b13d-400b-aceb-764788c761c2
main() into their own bitbang_check_prerequisites().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@626 81a1dc3b-b13d-400b-aceb-764788c761c2
definitions that are organized in pages.
* avr.c (avr_write_byte_default): Consider using the loadpage
instructions only if the respective memory is marked "paged".
Closes bug #17199: EEPROM fails verification on ATmega645 with
pony-stk200 hardware
Closes bug #16849: EEPROM write fails for AT90USB1287 with mode 0x41
Closes bug #15146: stk500v2_paged_write: loadpage instruction not
defined for part
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@622 81a1dc3b-b13d-400b-aceb-764788c761c2
option) as that is the programmer actually supported by
avrdude.conf.in.
Closes bug #15677: documentation mentions wrong programmer-id "avrispmk2"
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@621 81a1dc3b-b13d-400b-aceb-764788c761c2
AVR910 and AVR109. Change avr910_devcode of the ATtiny2313 to 0x5e
(ATtiny26).
Closes bug #16671: Tiny2313 avr910_devcode is bad
Closes bug #15826: avr910 device type for ATmega8 wrong
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@620 81a1dc3b-b13d-400b-aceb-764788c761c2
lock memory spaces of all devices where they have been missing. Add
the lock memory space to the ATmega48 section.
Closes bug #14920: tiny2313 fuses and AVRDUDE 5.0
Closes bug #15751: atmega48: no lock bits defined
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@619 81a1dc3b-b13d-400b-aceb-764788c761c2
* ppiwin.c (gettimeofday): Define gettimeofday() replacement
only if !defined(HAVE_GETTIMEOFDAY); use correct protype.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@616 81a1dc3b-b13d-400b-aceb-764788c761c2
always display the minor number as two digits. Examine the response
to the sign-on command to see which programmer hardware we are talking
to, and then restrict the STK500 topcard display to devices detected
as STK500.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@614 81a1dc3b-b13d-400b-aceb-764788c761c2
config_gram.h from the source distribution archive. These files are
supposed to be generated on the target system.
Closes bug #15536: avrdude-5.1 compilation fails on Gentoo/amd64
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@613 81a1dc3b-b13d-400b-aceb-764788c761c2
AVR068 is right, and stk500.exe is wrong. (This reverts rev 1.19)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@611 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4539: Ability to control the bit clock (usleep) delay
for ppi interface
* bitbang.c: Implement bitbang_delay() and its calibration.
* bitbang.h: Declare bitbang_delay().
* main.c: Add the ispdelay option (-i).
* pgm.h (struct programmer_t): Add the ispdelay parameter.
* par.c: Add calls to bitbang_delay() when requested.
* serbb_posix.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* avrdude.1: Document the new -i option.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@610 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c (stk500v2_open): patch #5273: Emit error message
if user requests usb and no libusb support
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@608 81a1dc3b-b13d-400b-aceb-764788c761c2
files, and produce an avrdude.conf[.in] snippet.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@603 81a1dc3b-b13d-400b-aceb-764788c761c2
macro to add this library to, to prevent it from being
automatically linked to all binaries. This should fix the Win32
build of loaddrv.
* Makefile.am (avrdude_LDADD): add LIBUSB here.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@602 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@595 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix the non-paged write operations for old AVRs.
In avrdude.conf.in, use the new PP mode parameters; add PP mode
definitions for AT90S8515.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@591 81a1dc3b-b13d-400b-aceb-764788c761c2
as it is only used there (for the AVRISP mkII).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@590 81a1dc3b-b13d-400b-aceb-764788c761c2
Eliminate pagebuf, and use stack-allocated buffers instead. The
pagesize of all current AVRs is at most 256 only anyway, and this is
unlikely to change with the STK500v2 protocol. The previous pagebuf
implementation suffered from some possible buffer overrun.
In stk500pp_write_page(), do always write full pages, rather than
attempting to write a partial last page which did not get written at
all. Fill the remaining bytes with 0xff.
For (paged) write operations, correctly synthesize the mode byte.
This mode byte is very different from the ISP mode byte (sigh).
In stk500pp_read_byte(), when performing read operations on paged
memory, start reading at the previous page boundary rather than the
current address.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@589 81a1dc3b-b13d-400b-aceb-764788c761c2
give the full name of the respective memory area, instead of
the (possibly abbreviated) name the user typed in the -U option.
(Previous attempt in rev 1.110 was obviously not complete.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@588 81a1dc3b-b13d-400b-aceb-764788c761c2
Document ATmega256x support. Also document Solaris port defaults
in avrdude.texi.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@584 81a1dc3b-b13d-400b-aceb-764788c761c2
jtag2 and bitbang programmers are working, stk500v2
still needs to be done.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@581 81a1dc3b-b13d-400b-aceb-764788c761c2
Add the "atisp" programmer entry that makes use of negated signals.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@578 81a1dc3b-b13d-400b-aceb-764788c761c2
The 64 KB devices are actually guessed, as the datasheet and XML
files obviously contain a number of errors there.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@576 81a1dc3b-b13d-400b-aceb-764788c761c2
Contributed by Wim Lewis, add support for checking device
signatures in detail (patch #4924 and #4925)
* avrdude.conf.in: Add signatures
* avrpart.c: Set default signature
* avrpart.h: Variable for signature
* config_gram.y: More signature reading
* lexer.l: Define that signatures exist
* main.c: Read signatures and check them against hardware
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@573 81a1dc3b-b13d-400b-aceb-764788c761c2
Which stops sck from being writtend needlessly
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@568 81a1dc3b-b13d-400b-aceb-764788c761c2
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
ATmega48/88/168; the datasheet is a bit off here as well.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@560 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #4459: Fix for rpm package builds
* avrdude.spec.in: update the RPM spec file:
- Default to enable-doc=yes during configure.
- Move info file to docs package.
- Make building of docs package conditional. Basic
idea copied from avr-gcc.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@558 81a1dc3b-b13d-400b-aceb-764788c761c2
Fix bug #15013: Wrong use of PPICLAIM (kernel: ppdev0: claim the
port first)
* par.c: don't claim/release here (thus win_ppdev.h not needed
anymore)
* ppi.c: claim/release here.
* freebsd_ppi.h: ppi_claim/ppi_release now take an fd as parameter.
* solaris_ecpp.h: (Ditto.)
* linux_ppdev.h: (Ditto.) (Also add copyright.)
* win_ppdev.h: Not needed anymore, remove.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@557 81a1dc3b-b13d-400b-aceb-764788c761c2
Beautify Colin's recent entries while being here.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@551 81a1dc3b-b13d-400b-aceb-764788c761c2
While Solaris' lex understands start conditions, they cannot be grouped,
so unfold the <strng> group.
All actions need braces, even if they only consist of a comment.
As the classic lex uses semi-static resource allocation, we need to bump
the resource limits quite a bit.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@541 81a1dc3b-b13d-400b-aceb-764788c761c2
two-step declaration, and first define token_p to be a token_t *,
and then define YYSTYPE to token_p. That works around a bug in
Solaris' yacc.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@540 81a1dc3b-b13d-400b-aceb-764788c761c2
* Makefile.am: distclean avrdude.conf.
* avrdude.conf.in: make the parallel-port programmers optional.
* bitbang.c: move the bitbang features out into PROGRAMMER.
* configure.ac: introduce --enable-parport, add Solaris.
* lexer.l: replace str by strng to work around problems in some
versions of flex.
* main.c: move getexitspecs into the respective programmer's
domain; replace rindex by the C-standard strrchr.
* par.c: make parallel port optional.
* par.h: everything but par_initpgm() is private now.
* pgm.h: add setping/getping/highpulsepin/getexitspecs.
* serbb_posix.c: generalize bitbang interface; replace
cfmakeraw() by explicit code.
* serbb_win32.c: generalize bitbang interface.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@539 81a1dc3b-b13d-400b-aceb-764788c761c2
wide tty output. Document a trick to find out about the serial
numbers of all JTAG ICEs attached to USB.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@534 81a1dc3b-b13d-400b-aceb-764788c761c2
. use the correct endpoint, depending on whether we are going to read
or write
. when opening the USB device, set the configuration according to the
config entry, and properly claim the interface
. when closing, release the interface again
With these changes, it works now with libusb-win32 as well.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@533 81a1dc3b-b13d-400b-aceb-764788c761c2
give the full name of the respective memory area, instead of
the (possibly abbreviated) name the user typed in the -U option.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@529 81a1dc3b-b13d-400b-aceb-764788c761c2
string. Actually evaluate that number as microseconds then, as the
documentation used to state already.
While being there, re-sort the -s option into alphabetical order.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@527 81a1dc3b-b13d-400b-aceb-764788c761c2
Document the addition of the latest safemode update in the change log.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@522 81a1dc3b-b13d-400b-aceb-764788c761c2
will be available in the upcoming avrdude release.
His addition has been implemented by means of a generalized bit-bang
interface that contains the common part between serial and paralle
bit-bang devices, and specialed backends for the serial and parallel
port connections.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@515 81a1dc3b-b13d-400b-aceb-764788c761c2
doc/avrdude.texi: (Ditto.)
Closes bug #13501: <memtype> should be listed in the man page
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@500 81a1dc3b-b13d-400b-aceb-764788c761c2
gratitous API change in recent versions of texi2html where
the output directory has changed names.
Fix for:
bug #13026: The build fails with texi2html 1.76
bug #12715: make issues during install
patch #3091: commandline fix for latest version of texi2html
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@499 81a1dc3b-b13d-400b-aceb-764788c761c2
synchronizing against a JTAG ICE in weird state.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@497 81a1dc3b-b13d-400b-aceb-764788c761c2
that way. ;-) For those who want the 19200 Bd one, add "jtag2slow".
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@495 81a1dc3b-b13d-400b-aceb-764788c761c2
appears to have a complete XML description right now.
Document all the recently added new devices: AT90PWM2/3,
ATmega164/324/644, ATmega329x/649x, ATtiny25/45/85.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@489 81a1dc3b-b13d-400b-aceb-764788c761c2
all the details right now, so some of the parameters are guessed.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@487 81a1dc3b-b13d-400b-aceb-764788c761c2
changes to butterfly.c include:
. do not exit for unsupported devices but return -1 from the init function
instead; that way the -F option can be used to continue anyway
. honor the -b option as arbitrary bootloaders could be implemented with
any baud rate, not just the fixed 19200 Bd used by the butterfly
. implement functionality to read the fuse and lock bits, and write the
(boot) lock bits, resp.
. fix the signature byte order
The remaining files document the new functionality.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@486 81a1dc3b-b13d-400b-aceb-764788c761c2
to have problems sending a control message (returns an "I/O error").
At least try to recover gracefully in the bening case where the user
did not request a particular serial number, so we could continue
anyway without knowing it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@481 81a1dc3b-b13d-400b-aceb-764788c761c2
mkII.
The serial transport methods have been moved out into a record of
function pointers for that purpose, defaulting to the actual serial
connection that natively applies to the hosting system. Iff inside
the JTAG ICE mkII handler a port name starting with "usb" has been
detected, the record of function pointers is switched to USB.
Optionally, a serial number might be specified, so only the JTAG ICE
mkII matching the given serial number will be opened. The match is
done right-to-left, so only the least significant bytes of the serial
number need to be given.
In order to make the change as least intrusive to existing drivers as
possible, the entire naming scheme of the serial_foo() function entry
points has been maintained as access macros that encapsulate these
into the respective indirect function calls via serdev->foo().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@478 81a1dc3b-b13d-400b-aceb-764788c761c2
Iff enter_progmode failed with RSP_ILLEGAL_JTAG_ID, give the user a
hint that their JTAGEN fuse might be unset.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@476 81a1dc3b-b13d-400b-aceb-764788c761c2
of the packet to occasionally been misinterpreted as a negative
number.
When discarding a packet for being overly long, restart the state
machine instead of attempting to drop a preposterous amount of data.
It is unlikely in that case that preposterous amount of data would
ever arrive, so rather attempt to re-align the reading algorithm
(supposedly resulting in a timeout and retransmit).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@472 81a1dc3b-b13d-400b-aceb-764788c761c2
one byte at a time. Also mention the bug tracker interface on
savannah.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@471 81a1dc3b-b13d-400b-aceb-764788c761c2
* configure.ac (AC_INIT): Set version to "4.4.0cvs".
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@435 81a1dc3b-b13d-400b-aceb-764788c761c2
* NEWS: Fix typo.
* bootstrap: Delete the autom4te.cache dir before running the autotools.
* configure.ac (AC_INIT): Set version to 4.4.0.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@433 81a1dc3b-b13d-400b-aceb-764788c761c2
When showing update progress in a no tty situation, use unbuffered IO
for all systems, not just win32 native.
Update copyright year when printing version.
Remove warning about native win32 being experimental.
Split a line string.
* ppiwin.c: Update copyright year.
Add cvs Id keyword.
(usleep): Cleanup debug CPP directives to improve readability.
* ser_win32.c: Include <stdio.h> to fix failing build.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@430 81a1dc3b-b13d-400b-aceb-764788c761c2
* ser_win32.c: Assign copyright to Martin J. Thomas since he did all
real work on this file.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@429 81a1dc3b-b13d-400b-aceb-764788c761c2
was based on a typo in the datasheet which Atmel agreed is going to be
fixed.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@420 81a1dc3b-b13d-400b-aceb-764788c761c2
were not needed at all, and got in the way when compiling on a 64-bit
host OS.
Suggested by: Brian S. Dean
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@413 81a1dc3b-b13d-400b-aceb-764788c761c2
* doc/TODO: Still need to remove these options from documentation
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@410 81a1dc3b-b13d-400b-aceb-764788c761c2
* pgm.c: Fixed wrong type for default_open introduced by the cleanup yesterday.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@409 81a1dc3b-b13d-400b-aceb-764788c761c2
This change should increase immunity to delays in the
programmer-hardware.
Also did some unrelated cleanup in par_txrx().
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@408 81a1dc3b-b13d-400b-aceb-764788c761c2
Move save/restore-functionality into open/close.
* par.c: open/close now saves/restores PPICTRL, too.
* TODO: exitspecs don't work if RESET is in PPICTRL.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@407 81a1dc3b-b13d-400b-aceb-764788c761c2
Reminded by: Eric
While being here, perform a few style fixes to recent entries as well.
Noticed by: Emacs :-)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@393 81a1dc3b-b13d-400b-aceb-764788c761c2
than memory device size.
(stk500_paged_write): Send whole block at once.
(stk500_paged_load): Limit blocks read to no bigger than memory
device size.
[Contributed by Bill Somerville <bill@classdesign.com>, this fixes
bug #5713.]
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@376 81a1dc3b-b13d-400b-aceb-764788c761c2
* configure.ac (AC_INIT): Add cvs back to version since we're
back in dev cycle (post release).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@367 81a1dc3b-b13d-400b-aceb-764788c761c2
support for avr910.
* configure.ac (AC_INIT): Set version to 4.2.0.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@365 81a1dc3b-b13d-400b-aceb-764788c761c2
lines should be less than 80 chars including 8 spaces for the tab.
Date should be YYYY-MM-DD not YYYY/MM/DD.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@363 81a1dc3b-b13d-400b-aceb-764788c761c2
Define avrdude_CFLAGS.
* configure.ac: Set ENABLE_WARNINGS to "-Wall" if using gcc.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@362 81a1dc3b-b13d-400b-aceb-764788c761c2
fixes stk500 problem where number of bytes written is less than a page.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@348 81a1dc3b-b13d-400b-aceb-764788c761c2
* doc/avrdude.texi: Document the -q option.
Fix some typos left over from pasting in man output.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@339 81a1dc3b-b13d-400b-aceb-764788c761c2
Michal Ludvig
Joerg Wunsch
Thomas Fischl
David Hoerl
Colin O Flynn
Eric Weddington
Brian S. Dean
Theodore A. Roth
Jan-Hinnerk Reichert
kiwi64ajs