22bd977365
Indent erasing chip message in main
2022-11-10 23:18:43 +00:00
c67bfe39a3
Show input file staistics before patching in update.c
2022-11-10 23:00:18 +00:00
321bddbf7b
Rename urclock's option forcetrim to restore
2022-11-10 22:35:40 +00:00
afa408e2c6
Make urclock.c iron out a bug in some bootloaders
2022-11-09 21:00:16 +00:00
d5d0b940cc
Harden vector bootloaders more against reset overwrites
2022-11-09 19:28:29 +00:00
84a3e2cc2b
Fix avr.c comment
2022-11-09 19:27:34 +00:00
c7ba53bca0
Harden urclock against terminal time outs and vector overwrites
2022-11-09 16:16:59 +00:00
ea65918dca
Omit verify after write failure in term.c
2022-11-09 15:43:57 +00:00
20b86fb739
Warn in uclock when bootloader cannot read/write memories
2022-11-08 20:16:05 +00:00
6a6d333849
Update urclock documentation
2022-11-08 15:18:30 +00:00
cf3c81f714
Update urclock's -x parameters
2022-11-07 18:01:23 +00:00
715db4c690
Make -A default for urclock programmer
2022-11-07 02:43:34 +00:00
21d93ec8cb
Update urclock programmer
2022-11-07 01:26:47 +00:00
e6c26d8db4
Provide urclock programmer
2022-11-06 01:29:07 +00:00
4c92030e3a
Update NEWS
2022-11-01 18:20:06 +00:00
d211c4e5f5
Merge pull request #1164 from MCUdude/hvupdi-type2-fix
...
Fix Type 2 HV UPDI
2022-11-01 18:17:52 +00:00
02fe08aed2
Open programmer before allocating part
...
So any programmer that knows exactly which part it is connected to
can set the -p part option should the user not have done so.
Also no longer exits main without closing open programmer.
2022-11-01 18:12:00 +00:00
577ee72db7
Fix Type 2 HV UPDI
...
Used on AVR-DD and AVR-Ex targets
2022-10-31 11:06:14 +01:00
b5699663c4
Update NEWS
2022-10-29 11:05:25 +01:00
50046da923
Merge pull request #1151 from dbuchwald/serialupdi_page_erase
...
Implementation of SerialUPDI page erase operation
2022-10-29 11:02:17 +01:00
a3c04d294e
Merge pull request #1156 from mcuee/readline_macos
...
Readline macos
2022-10-29 11:00:06 +01:00
d87eb14dc9
Make -p variable partdesc global
2022-10-29 10:55:58 +01:00
87df3216cb
Make fileio() and do_op() arguments const where possible
2022-10-29 10:48:47 +01:00
a1018999c4
Correct plural for message writing %d bytes in term.c
2022-10-26 08:42:03 +01:00
418cf08e84
Change avrdude.conf.in comment on location of per-user config file
2022-10-25 18:13:28 +01:00
5862a5b7e9
Use readline for github action macOS Homebrew
...
Update github action to use readline keg and not the default libedit under Homebrew
2022-10-24 08:50:57 +08:00
79c43789a9
Update build.sh to use readline keg
...
For macOS Homebrew, readline is a keg. This change makes avrdude uses readline keg.
2022-10-24 08:47:02 +08:00
1dba916e06
Update NEWS
2022-10-23 23:33:56 +01:00
3769332afd
Merge pull request #1142 from MCUdude/stk600-pdi
...
STK600 supports programming using PDI
2022-10-23 23:10:10 +01:00
ec1e7156bd
Merge pull request #1154 from avrdudes/revert-1148-readline_mingw
...
Revert "Add readline for MSYS2 mingw32/mingw64 build"
2022-10-23 23:09:18 +01:00
960bf7b959
Revert "Add readline for MSYS2 mingw32/mingw64 build"
2022-10-23 23:04:16 +01:00
0ebf220315
Merge pull request #1148 from mcuee/readline_mingw
...
Add readline for MSYS2 mingw32/mingw64 build
2022-10-23 22:42:10 +01:00
b1b4a180ba
Merge pull request #1146 from mcuee/readline_action
...
Add libreadline-dev for Linux github action build
2022-10-23 22:39:54 +01:00
ae5b460859
Merge pull request #1141 from stefanrueger/paged
...
Always use paged access for programmers that serve bootloaders
2022-10-23 22:33:31 +01:00
baaad71aa5
Support optiboot, optiboot_dx and optiboot_x bootloaders for -c arduino ( #1140 )
...
* If bootloaders are served, send word addresses for classic parts and
byte addresses for newer parts, eg, UPDI and PDI
* Load ext addr for stk500v1 bootloaders after grazing 64k boundaries
* Fix bootloader stk500v1 EEPROM r/w for classic parts with page size 1
2022-10-23 22:32:29 +01:00
16922842be
Improve -B bitclock documentation
2022-10-23 22:26:07 +01:00
2c7083f001
Merge pull request #1139 from steelman/isp-clock-error-message
...
Mention -B in the error message and document -F better
2022-10-23 21:59:21 +01:00
4f6bab6303
Merge pull request #1138 from MCUdude/pic-detect-mode-cherry
...
Detect PICkit4 and SNAP in PIC mode
2022-10-23 21:57:26 +01:00
5b008a04cf
Revamp terminal output: progress bar, callback and stdout/stderr ( #1132 )
...
* Print parms output to stdout
* Flush terminal writes and other minor changes
* Prepare terminal for periodic calls to programmer to reset bootloader WDT
* Only show progress reports for memories > 32 bytes or on -vv
* Freeze progress bar on serious error
* Allow cached r/w byte routines to be used in pgm->read_byte and pgm->write_byte
2022-10-23 21:56:45 +01:00
34fa2faba5
Look for ~/.config/avrdude/avrduce.rc configuration file ( #1131 )
...
* Look for ~/.config/avrdude/config configuration file
Traditionally per-user configuration files have been placed
in user's home directory with their names beginnig with a dot
to hide them from some tools like ls(1). However, the number
of programs following this convention have grown over time
to the point where the number of hidden files becomes inconvenient to
some users. For this reason the XDG Base Directory Specification[1]
specifies an alternate place to store configuration files under
~/.config directory.
This patch enables avrdude to look for ~/.config/avrdude/config
configuration file, if ~/.avrduderc doesn't exist.
[1] https://specifications.freedesktop.org/basedir-spec/basedir-spec-0.8.html
* Safely concatenate directories and configurations files and minor changes in docs
* Make stats variable available for WIN32 again in main.c
* Utilise full usr_config[] array space
* Check for xdg-style avrdude.rc file first before fallback ~/.avrduderc
Co-authored-by: Stefan Rueger <stefan.rueger@urclocks.com>
2022-10-23 21:52:54 +01:00
fa1c081a94
Implemented page erase operation for SerialUPDI
2022-10-23 15:06:06 +02:00
2230c05871
Merge pull request #1 from avrdudes/main
...
Merge latest avrdudes/avrdude main branch
2022-10-23 13:56:52 +02:00
e300861505
Add readline for MSYS2 mingw32/mingw64 build
2022-10-23 14:40:04 +08:00
21e372f639
Add libreadline-dev for Linux github action build
2022-10-23 14:03:33 +08:00
992e9666a3
STK600 supports programming using PDI
2022-10-22 12:51:03 +02:00
c890ff90eb
Mention -B in the error message
...
One of possible problems of failed initialization is too hight frequency
of ISP clock. Mention using -B option as a possible solution.
Closes #1133
2022-10-21 02:33:34 +02:00
b9396bcd02
Always use paged access for programmers that serve bootloaders
2022-10-21 00:56:43 +01:00
9977f1ed12
Document meaning of -F during initialization
2022-10-20 19:52:35 +02:00
72da5c73db
Fix formatting and replace tabs with spaces
2022-10-20 12:39:11 +02:00
867d83c215
Print error message if no HID device is connected when using hidapi
2022-10-20 12:27:59 +02:00
Stefan Rueger
MCUdude
mcuee
steelman
Dawid Buchwald