Commit Graph

50 Commits

Author SHA1 Message Date
Nils Springob 0c603e4791 * serial_open() calls will now return -1 on error (no call to exit())
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@948 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-10-22 14:29:56 +00:00
Joerg Wunsch 046db1aa07 If entering JTAG mode fails with a bad JTAG ID message, retry with
external reset applied (in case the target is in sleep mode or has
asserted the JTD bit).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@926 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-17 17:31:10 +00:00
Joerg Wunsch e2abbd7d84 * avrdude.1: Update documentation to match the reality (device
support, memory areas).
* doc/avrdude.texi: Update documentation to match the
reality (device support, programmer support, memory areas).
Merge buspirate-specific comments from avrdude.1.
* jtagmkII.c: Add some firmware feature checks.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@913 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-14 13:46:02 +00:00
Joerg Wunsch 30be2be8ca Implement PDI mode support for the JTAG ICE mkII and the AVR Dragon.
(AVR Dragon not yet verified.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@912 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 17:34:18 +00:00
Joerg Wunsch 9dea1a623d * jtagmkII.c: Stylistic changes: move #defines out into
jtagmkII_private.h, drop all #if 0 blocks, fold overly long lines,
move the *_initpgm() functions to the end of the file; while being
here, remove all trailing whitespace.
* jtagmkII_private.h: move AVR32 #defines here.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@909 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 08:37:57 +00:00
Joerg Wunsch 5774debe8f After erasing an Xmega part, do *not* reinitialize the world, as a
subsequent programming operation will fail (for unknown reasons).
Actually, this was really only required for ancient AVRs, but doesn't
hurt on mega and tiny devices.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@904 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-11 16:04:29 +00:00
Joerg Wunsch 37fbb66f07 Clean-up the Xmega erase functions.
* jtagmkII_private.h: Add CMND_XMEGA_ERASE as well as
the various XMEGA_ERASE_* definitions (from updated
appnote AVR067)
* jtagmkII.c (jtagmkII_chip_erase): Correctly implement
Xmega chip erase based on CMND_XMEGA_ERASE.
* jtagmkII.c (jtagmkII_pre_write): Remove, this turned out
to be just a chip erase.
* jtagmkII.c (jtagmkII_program_disable): Don't try reading
"hfuse" for Xmega parts; they don't have it.
* main.c (main): Re-enable auto-erase.  It's been done
before (as "jtagmkII_pre_write") in jtagmkII_paged_write()
anyway.  Xmega boot and application flash areas should be
handled separately in the future, so auto_erase can only
affect the area just being programmed.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@903 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-11 15:27:44 +00:00
Joerg Wunsch f7cb1f53ea Fix a few warnings that came up recently (some of them only triggered
by recent GCC versions).
* config_gram.y (parse_cmdbits): "brkt possibly used uninitialized"
(GCC errs here)
* jtagmkII.c (jtagmkII_reset32): "status possibly used uninitialized"
(I think GCC errs, too)
* buspirate.c: "pointers differ in signedness" (mismatch between
string processing and the use of "unsigned char" throughought the
AVRDUDE API)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@882 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-07 13:13:02 +00:00
Joerg Wunsch 23d95b80dd jtagmkII_smc_init32(): replace sleep() by usleep() for
win32 compatibility.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@881 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-01 08:55:33 +00:00
David Hoerl a5872f43f9 Small changes to remove warnings in avr32 code
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@871 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-12 22:33:49 +00:00
David Hoerl 53ac27af20 avr32 cleanup, now does flash read and verify
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@870 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-12 16:44:30 +00:00
David Hoerl 185feee936 Removed some comments
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@863 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 23:44:06 +00:00
David Hoerl 859977db9a AVR32 verify and read now work
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@862 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 23:34:03 +00:00
David Hoerl 22d839cb0a AVR32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@850 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 20:09:53 +00:00
Joerg Wunsch 0b871f2b6e * jtagmkI.c (jtagmkI_send): Replace %zd format by %u since not all
implementations do understand the C99 formatting options (sigh).
* jtagmkII.c (jtagmkII_send): (Ditto.)
* stk500v2.c (stk500v2_recv): (Ditto.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@836 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-10 22:39:37 +00:00
Joerg Wunsch a5f42858ea Contributed by Zoltan Laday:
patch #6825: xmega problems with JTAGICEmkII
* jtagmkII.c: Many fixes for Xmega devices.
* jtagmkII_private.h: Add various new constants required for
Xmega devices.
* avrdude.conf.in: New devices: ATXMEGA64A1, ATXMEGA192A1,
ATXMEGA256A1, ATXMEGA64A3, ATXMEGA128A3, ATXMEGA192A3,
ATXMEGA256A3, ATXMEGA256A3B, ATXMEGA16A4, ATXMEGA32A4,
ATXMEGA64A4, ATXMEGA128A4
* avr.c (avr_read, avr_write): Add more names for (Xmega)
memory areas that require paged operation.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@821 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-06-24 21:32:12 +00:00
Joerg Wunsch 3d87270ef2 Submitted by Ed Okerson:
* jtagmkII.c (jtagmkII_read_byte): Fix signature reading of
Xmega.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@810 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-27 08:29:30 +00:00
Joerg Wunsch 8b35dc3620 More fixes for Solaris, including fixes for the Sunpro compiler:
* avr.h: Remove stray semicolon.
* configure.ac: Add check for predefined types uint_t and ulong_t.
* confwin.c: Include "avrdude.h" on top to avoid empty translation
unit warning.
* ppwin.c: (Ditto.)
* ser_win32.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* jtagmkII.c (jtagmkII_recv): remove unreachable "return".
* stk500.c (stk500_initialize): (Ditto.)
* par.c: Test for both, __sun__ and __sun to see whether we are
being compiled on Solaris.
* ppi.c: (Ditto.)
* stk500v2.c: Implement the DEBUG and DEBUGRECV macros in a way
that is compatible with the ISO C99 standard.
* usbtiny.c: Only typedef uint_t and ulong_t if they have not
been found already by the autoconf checks.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@804 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-23 22:04:57 +00:00
Joerg Wunsch 5eea41bfce Submitted by Mark Litwack:
patch #6261: avrdude won't use dragon/debugwire to write a file
to eeprom
* jtagmkII.c (jtagmkII_paged_write): when in debugWire mode,
implement a paged write to EEPROM as a series of byte writes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@792 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-16 12:26:44 +00:00
Joerg Wunsch 21d6738cc8 Fix a serious memory corruption that happened when using the JTAG ICE
mkII (or AVR Dragon) in ISP mode.  The wrong set of per-programmer
private data had been allocated (stk500v2 vs. jtagmkII) which was too
small to hold the actual data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@781 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:26:06 +00:00
Joerg Wunsch a91e8e01b2 This change actually dates back to July 29: add preliminary support
for Xmega programming using the JTAG ICE mkII in JTAG mode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@780 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:16:46 +00:00
Joerg Wunsch 6a633ea9f1 Fix a bunch of warnings.
* avr910.c (avr910_paged_load): possible unitialized use of
rd_size
* jtagmkI.c (jtagmkI_initialize): pointer signedness mixup
* jtagmkII.c (jtagmkII_print_parms1): propagate const'ness
of parameter
* usbasp.c (usbasp_transmit): poiner signedness mixup


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@775 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-25 21:14:43 +00:00
Joerg Wunsch 58a3d35757 main.c, pgm.c, pgm.h: Add setup and teardown hooks to the programmer
definition.  If present, call the setup hook immediately after finding
the respective programmer object, and schedule the teardown hook to be
called upon exit.  This allows the programmer implementation to
dynamically allocate private programmer data.

avr910.c, butterfly.c, jtagmkI.c, jtagmkII.c, stk500v2.c, usbasp.c,
usbtiny.c: Convert static programmer data into dynamically allocated
data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@764 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-07 20:36:12 +00:00
Joerg Wunsch f5c3910d48 main.c, pgm.c, pgm.h: Add the -x option to pass extended parameters to
the programmer backend.

jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.

avrdude.1, doc/avrdude.texi: Document all of the above.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:16 +00:00
Joerg Wunsch b8a306c048 safemode.c: Obtain progname from avrdude.h rather than trying to roll our
own (duplicate) copy of it.

other files: Constify char pointers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@725 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-30 13:41:54 +00:00
Joerg Wunsch 27e16e8371 Something I always wanted to do: replace all those private "extern"
declarations in each file by a central header file "avrdude.h".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 21:07:54 +00:00
Joerg Wunsch f7f185f176 In jtagmkII_paged_write(), remove a debugging
usleep(1000000) that accidentally crept in in rev 1.19.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@702 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 16:48:52 +00:00
Joerg Wunsch 7e20e7571f Make the code compile warning-free:
- declare a dummy "struct timezone" for some Win32 systems (MinGW)
- fix a few printf() argument types
- get rid off the prevailing "all filedescriptors are of type int"
  attitude

The last item required a large sweep across the code, in order to
replace all "int fd"s by "struct filedescriptor *fd"s, and pass
pointers (as we cannot pass a union directly).  In return, the
code is now supposed to be fully 64-bit safe, rather than relying
on a 64-bit pointer being converted to a (32-bit) int and back
to a pointer as we did previously.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@694 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 12:47:35 +00:00
Joerg Wunsch 84b633e41d Implement EEPROM access through debugWire.
* jtagmkII.c: Extend the jtagmkII_read_byte() and
jtagmkII_write_byte() methods to handle EEPROM through
debugWire.

* avrpart.h: Implement the "flash instruction" parameter.
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)

* avrdude.1: Document the EEPROM access through dW.
* doc/avrdude.texi: (Ditto.)

* tools/get-dw-params.xsl: Extend to extract the flash
instruction field.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@693 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-23 07:07:06 +00:00
Joerg Wunsch 0e054fac95 In jtagmkII_read_byte() and jtagmkII_write_byte(), return an error
upon failure now that the upper layers won't fall back to the cmd()
method anymore in that case.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@691 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-21 16:13:08 +00:00
Joerg Wunsch 9b9df3e773 Implement debugWire programming support. Several limitations are
imposed by debugWire itself, so effectively, only flash ROM can be
read and written.

Currently, the required changes to avrdude.conf.in are only present
for the ATtiny44.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@688 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 23:23:37 +00:00
Joerg Wunsch afb13a9936 Replace the fallback of avr_read_byte() and avr_write_byte() to
avr_read_byte_default() and avr_write_byte_default (resp.) by directly
calling the latter functions from within all programmers that don't
implement their own read_byte()/write_byte() methods.  In turn, make the
read_byte() and write_byte() methods mandatory, and the cmd() method
(direct ISP command) optional instead (it's effectively mandatory for
any programmer using avr_read_byte_default()/avr_write_byte_default()
though).  Remove all the pointless cmd() method stubs from those programmers
that don't need it.

Eliminate avr_read_byte() as it was now completely identical to
pgm->read_byte().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@684 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 15:04:09 +00:00
Joerg Wunsch 31f93ccb59 Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
Joerg Wunsch 4e81a6be72 Implement a flags field in struct serdev, and populate it with a flag
that indicates whether the underlying communication can dynamically
change its speed or not.  This flag is set for true serial
communication but clear for USB communication.  Don't try to adjust
the speed when talking over a communication channel that doesn't
support it.  (The Dragon does not even support the respective
parameter.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@676 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-27 08:45:47 +00:00
Joerg Wunsch 90d6100d88 Add support for the AVR Dragon (JTAG and ISP mode).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@675 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-26 21:14:10 +00:00
Joerg Wunsch 9a961e3054 Translate numerical response codes to strings.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@650 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-07 19:57:59 +00:00
Joerg Wunsch e3963eb464 Fix a broken indentation.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@649 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-07 19:37:41 +00:00
Joerg Wunsch 8d207dbaf1 When failing to start in ISP mode, try debugWire instead. This
requires the user to eventually restart AVRDUE from scratch then.

jtagmkII_reset() had to get a second parameter in order to record
the reset mode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@647 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 22:37:30 +00:00
Joerg Wunsch 995bd68034 Add support for the JTAG ICE mkII in ISP mode.
* avrdude.conf.in (jtag2isp): New programmer entry.
* config_gram.y: Add K_JTAG_MKII_ISP.
* jtagmkII.c: Restructure and export some more functions.
* jtagmkII.h: Declare exported functions.
* jtagmkII_private.h: Prepare file to be included in stk500v2.c.
* lexer.l: Add jtagmkii_isp token.
* stk500v2.c: Implement glue to jtagmkII.c.
* stk500v2.h: Declare stk500v2_jtagmkII_initpgm().
* avrdude.1: Document the new programmer support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@643 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 20:06:07 +00:00
Joerg Wunsch d98636cfad Contributed by dcm@mit.edu: add support for the
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-01-12 23:13:50 +00:00
Joerg Wunsch 8e5b230e47 In jtagmkII_paged_write(), default the pages size to 256 early enough
so the buffer will then be allocated correctly.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@532 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-26 12:16:45 +00:00
Joerg Wunsch 3b15170bfd * jtagmkII.c (jtagmkII_paged_load): return the number of bytes read.
This makes EEPROM block reads work again.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@498 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-16 15:52:28 +00:00
Brian S. Dean e623fea507 Eliminate compiler warnings. GCC 4.x elicits many signedness warnings
when passing unsigned char * when char * is in the prototype and vice
versa.  Clean these up along with a few others.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@491 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-08-30 01:30:05 +00:00
Joerg Wunsch f5882fc781 Implement and document a libusb-based USB transport for the JTAG ICE
mkII.

The serial transport methods have been moved out into a record of
function pointers for that purpose, defaulting to the actual serial
connection that natively applies to the hosting system.  Iff inside
the JTAG ICE mkII handler a port name starting with "usb" has been
detected, the record of function pointers is switched to USB.
Optionally, a serial number might be specified, so only the JTAG ICE
mkII matching the given serial number will be opened.  The match is
done right-to-left, so only the least significant bytes of the serial
number need to be given.

In order to make the change as least intrusive to existing drivers as
possible, the entire naming scheme of the serial_foo() function entry
points has been maintained as access macros that encapsulate these
into the respective indirect function calls via serdev->foo().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@478 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-19 21:38:03 +00:00
Joerg Wunsch 8a91d9afec Add "efuse" sections to the ATmega164/324/644 definitions.
Iff enter_progmode failed with RSP_ILLEGAL_JTAG_ID, give the user a
hint that their JTAGEN fuse might be unset.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@476 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-14 21:44:34 +00:00
Joerg Wunsch 2be5a10ed8 Fix a signedness bug when shifting bits; this caused the length field
of the packet to occasionally been misinterpreted as a negative
number.

When discarding a packet for being overly long, restart the state
machine instead of attempting to drop a preposterous amount of data.
It is unlikely in that case that preposterous amount of data would
ever arrive, so rather attempt to re-align the reading algorithm
(supposedly resulting in a timeout and retransmit).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@472 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-27 12:15:28 +00:00
Joerg Wunsch 97926d510f Rename the BAUD_xxx baud rate defines to PAR_BAUD_xxx to avoid a name
clash with the Win32 API names for baud rates.

Reported by: Eric


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@462 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:48:05 +00:00
Joerg Wunsch a5a700f7a1 Quite some cleanup of the JTAG ICE mkII stuff.
. Implement the new EECRAddress field in the device descriptor that is
  required by the 4.x firmware; make an uneducated guess about what
  firmware requires what length of device descriptor -- perhaps Atmel
  can be convinced to publish an official matrix for that.

. Specify EECR in the config file where required.  Obviously, only
  locations that differ from the 0x3c default are mentioned in the
  XML files, so by now, this only affects the AT90CAN128 for us.

. After clarification with Atmel, EnablePageProgramming should really
  default to 1, and only cleared if specified by an XML parameter.  So
  far, only the XML files for the ATmega256x and ATmega406 do specify
  it at all, and they specify a 1, too.

. Drop the entire OCDEN fuse heuristic.  If OCDEN is unprogrammed at
  startup, issue a warning that single-byte EEPROM updates won't be
  possible.  Leave it to the user to program the fuse if desired.
  That way, we won't run into any issue of prematurely wearing out the
  hfuse EEPROM cell.  Interestingly enough, this also solved the
  problem of the target not restarting from scratch upon sign-off.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@461 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 20:06:23 +00:00
Joerg Wunsch 566a0ec0e6 Make the retrier in case of rx timeouts more robust, by increasing
the receive timeout once a timeout happened.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@458 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-11 16:58:12 +00:00
Joerg Wunsch 43b0ed2142 Oops, more files I forgot to add during the last commit.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@453 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:53:56 +00:00