Commit Graph

59 Commits

Author SHA1 Message Date
Joerg Wunsch 3a4b48b583 bug #28744: Can't load bootloader to xmega128a1 (part 2, fix for
firmware >= V7.x)
* jtagmkII.c: Add firmware-version dependent handling of Xmega parameters.
V7.x firmware expects the NVM offsets being specified through the Xmega
parameters command, but left out as part of the memory address itself.
* jtagmkII_private.h: Add CMND_SET_XMEGA_PARAMS, and struct xmega_device_desc.
* config_gram.y: Add mcu_base keyword.
* avrpart.h: (Dito.)
* lexer.l: (Dito.)
* avrdude.conf.in (.xmega): add mcu_base, and data memory segment.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1078 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-04-13 15:25:41 +00:00
Joerg Wunsch df6f97d78c bug #28744: Can't load bootloader to xmega128a1 (part 1, fix for
firmware < V7.x)
* jtagmkII.c: When going to write to the boot section of flash,
use MTYPE_BOOT_FLASH rather than MTYPE_FLASH
* jtagmkII_private.h: add MTYPE_BOOT_FLASH constant



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1077 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-03-30 16:19:13 +00:00
Joerg Wunsch d3a655ae58 Shesh. The previous commit was a little premature. Drag the
"GO" code in again, but only activate it when programming an
Xmega device through PDI.

Wonderfully consistent tools.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1071 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-03-20 14:42:20 +00:00
Joerg Wunsch 229b7cd075 * jtagmkII.c (jtagmkII_close): The GO command before signing off
turned out to do more harm than good; on the Xmega, it caused exactly
the opposite reaction, the CPU stopped.  Even without it, after the
RESET command, the target is running already.  So, drop the GO.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1070 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-03-20 14:21:33 +00:00
Rene Liebscher c1095de822 Parser does not need to know all programmer types now, new programmers
will update only the table in pgm_type.c.
  * config_gram.y, lexer.l: removed programmer type keywords,
    use now locate_programmer_type() function
  * pgm_type.[ch]: added new files for table of programmer types
  * main.c: allow list of programmer types by -c ?type
  * avrdude.conf.in: changed all type keywords to quoted strings
  * doc/avrdude.texi: changed description of type definition, list
    of valid types is now included from generated file
  * doc/Makefile.am: generate list of programmer types for doc
  * all programmers [hc]: add xxx_desc string for description of programmer


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1051 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-01-31 17:03:43 +00:00
Joerg Wunsch d742827da1 Mega-commit to bring in memory tagging.
Each memory image byte is now tagged as it's being read from a file.
Only bytes read from a file will be written or verified (modulo page
granularity requirements).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1007 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-09-14 21:49:42 +00:00
Joerg Wunsch 1f8dc4dc52 bug #33114: Segfault after setting the DWEN fuse with Dragon
* jtagII.c (jtagmkII_getsync): Instead of exit()ing from
deep within the tree when detecting the "need debugWIRE"
situation, properly pass this up as a return code.
* jtagII_private.h (JTAGII_GETSYNC_FAIL_GRACEFUL): New constant.
* stk500v2.c (stk500v2_jtagmkII_open): Don't tell anything
anymore when receiving a JTAGII_GETSYNC_FAIL_GRACEFUL from
jtagmkII_getsync(); silently give up (all necessary has been
said already).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@983 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-26 10:05:09 +00:00
Joerg Wunsch 161291f5ae Submitted by Timon Van Overveldt:
bug #30268: Debugwire broken in avrdude-5.10
* jtagmkII.c (jtagmkII_initialize): only try setting up a JTAG chain when
the programmer is using JTAG.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@973 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-08-16 18:47:52 +00:00
Joerg Wunsch 267697983f Bump timeout values to allow for slow clock speeds. Ideally, the
timeout should depend on the selected clock speed, but changing the
API for that would require quite some effort throughout the entire
code base.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@954 81a1dc3b-b13d-400b-aceb-764788c761c2
2011-05-11 20:42:27 +00:00
Nils Springob 0c603e4791 * serial_open() calls will now return -1 on error (no call to exit())
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@948 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-10-22 14:29:56 +00:00
Joerg Wunsch 046db1aa07 If entering JTAG mode fails with a bad JTAG ID message, retry with
external reset applied (in case the target is in sleep mode or has
asserted the JTD bit).



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@926 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-17 17:31:10 +00:00
Joerg Wunsch e2abbd7d84 * avrdude.1: Update documentation to match the reality (device
support, memory areas).
* doc/avrdude.texi: Update documentation to match the
reality (device support, programmer support, memory areas).
Merge buspirate-specific comments from avrdude.1.
* jtagmkII.c: Add some firmware feature checks.




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@913 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-14 13:46:02 +00:00
Joerg Wunsch 30be2be8ca Implement PDI mode support for the JTAG ICE mkII and the AVR Dragon.
(AVR Dragon not yet verified.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@912 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 17:34:18 +00:00
Joerg Wunsch 9dea1a623d * jtagmkII.c: Stylistic changes: move #defines out into
jtagmkII_private.h, drop all #if 0 blocks, fold overly long lines,
move the *_initpgm() functions to the end of the file; while being
here, remove all trailing whitespace.
* jtagmkII_private.h: move AVR32 #defines here.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@909 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-13 08:37:57 +00:00
Joerg Wunsch 5774debe8f After erasing an Xmega part, do *not* reinitialize the world, as a
subsequent programming operation will fail (for unknown reasons).
Actually, this was really only required for ancient AVRs, but doesn't
hurt on mega and tiny devices.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@904 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-11 16:04:29 +00:00
Joerg Wunsch 37fbb66f07 Clean-up the Xmega erase functions.
* jtagmkII_private.h: Add CMND_XMEGA_ERASE as well as
the various XMEGA_ERASE_* definitions (from updated
appnote AVR067)
* jtagmkII.c (jtagmkII_chip_erase): Correctly implement
Xmega chip erase based on CMND_XMEGA_ERASE.
* jtagmkII.c (jtagmkII_pre_write): Remove, this turned out
to be just a chip erase.
* jtagmkII.c (jtagmkII_program_disable): Don't try reading
"hfuse" for Xmega parts; they don't have it.
* main.c (main): Re-enable auto-erase.  It's been done
before (as "jtagmkII_pre_write") in jtagmkII_paged_write()
anyway.  Xmega boot and application flash areas should be
handled separately in the future, so auto_erase can only
affect the area just being programmed.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@903 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-11 15:27:44 +00:00
Joerg Wunsch f7cb1f53ea Fix a few warnings that came up recently (some of them only triggered
by recent GCC versions).
* config_gram.y (parse_cmdbits): "brkt possibly used uninitialized"
(GCC errs here)
* jtagmkII.c (jtagmkII_reset32): "status possibly used uninitialized"
(I think GCC errs, too)
* buspirate.c: "pointers differ in signedness" (mismatch between
string processing and the use of "unsigned char" throughought the
AVRDUDE API)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@882 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-07 13:13:02 +00:00
Joerg Wunsch 23d95b80dd jtagmkII_smc_init32(): replace sleep() by usleep() for
win32 compatibility.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@881 81a1dc3b-b13d-400b-aceb-764788c761c2
2010-01-01 08:55:33 +00:00
David Hoerl a5872f43f9 Small changes to remove warnings in avr32 code
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@871 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-12 22:33:49 +00:00
David Hoerl 53ac27af20 avr32 cleanup, now does flash read and verify
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@870 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-12 16:44:30 +00:00
David Hoerl 185feee936 Removed some comments
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@863 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 23:44:06 +00:00
David Hoerl 859977db9a AVR32 verify and read now work
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@862 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 23:34:03 +00:00
David Hoerl 22d839cb0a AVR32
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@850 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-10-10 20:09:53 +00:00
Joerg Wunsch 0b871f2b6e * jtagmkI.c (jtagmkI_send): Replace %zd format by %u since not all
implementations do understand the C99 formatting options (sigh).
* jtagmkII.c (jtagmkII_send): (Ditto.)
* stk500v2.c (stk500v2_recv): (Ditto.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@836 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-07-10 22:39:37 +00:00
Joerg Wunsch a5f42858ea Contributed by Zoltan Laday:
patch #6825: xmega problems with JTAGICEmkII
* jtagmkII.c: Many fixes for Xmega devices.
* jtagmkII_private.h: Add various new constants required for
Xmega devices.
* avrdude.conf.in: New devices: ATXMEGA64A1, ATXMEGA192A1,
ATXMEGA256A1, ATXMEGA64A3, ATXMEGA128A3, ATXMEGA192A3,
ATXMEGA256A3, ATXMEGA256A3B, ATXMEGA16A4, ATXMEGA32A4,
ATXMEGA64A4, ATXMEGA128A4
* avr.c (avr_read, avr_write): Add more names for (Xmega)
memory areas that require paged operation.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@821 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-06-24 21:32:12 +00:00
Joerg Wunsch 3d87270ef2 Submitted by Ed Okerson:
* jtagmkII.c (jtagmkII_read_byte): Fix signature reading of
Xmega.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@810 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-27 08:29:30 +00:00
Joerg Wunsch 8b35dc3620 More fixes for Solaris, including fixes for the Sunpro compiler:
* avr.h: Remove stray semicolon.
* configure.ac: Add check for predefined types uint_t and ulong_t.
* confwin.c: Include "avrdude.h" on top to avoid empty translation
unit warning.
* ppwin.c: (Ditto.)
* ser_win32.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* jtagmkII.c (jtagmkII_recv): remove unreachable "return".
* stk500.c (stk500_initialize): (Ditto.)
* par.c: Test for both, __sun__ and __sun to see whether we are
being compiled on Solaris.
* ppi.c: (Ditto.)
* stk500v2.c: Implement the DEBUG and DEBUGRECV macros in a way
that is compatible with the ISO C99 standard.
* usbtiny.c: Only typedef uint_t and ulong_t if they have not
been found already by the autoconf checks.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@804 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-23 22:04:57 +00:00
Joerg Wunsch 5eea41bfce Submitted by Mark Litwack:
patch #6261: avrdude won't use dragon/debugwire to write a file
to eeprom
* jtagmkII.c (jtagmkII_paged_write): when in debugWire mode,
implement a paged write to EEPROM as a series of byte writes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@792 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-16 12:26:44 +00:00
Joerg Wunsch 21d6738cc8 Fix a serious memory corruption that happened when using the JTAG ICE
mkII (or AVR Dragon) in ISP mode.  The wrong set of per-programmer
private data had been allocated (stk500v2 vs. jtagmkII) which was too
small to hold the actual data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@781 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:26:06 +00:00
Joerg Wunsch a91e8e01b2 This change actually dates back to July 29: add preliminary support
for Xmega programming using the JTAG ICE mkII in JTAG mode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@780 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-10-31 21:16:46 +00:00
Joerg Wunsch 6a633ea9f1 Fix a bunch of warnings.
* avr910.c (avr910_paged_load): possible unitialized use of
rd_size
* jtagmkI.c (jtagmkI_initialize): pointer signedness mixup
* jtagmkII.c (jtagmkII_print_parms1): propagate const'ness
of parameter
* usbasp.c (usbasp_transmit): poiner signedness mixup


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@775 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-25 21:14:43 +00:00
Joerg Wunsch 58a3d35757 main.c, pgm.c, pgm.h: Add setup and teardown hooks to the programmer
definition.  If present, call the setup hook immediately after finding
the respective programmer object, and schedule the teardown hook to be
called upon exit.  This allows the programmer implementation to
dynamically allocate private programmer data.

avr910.c, butterfly.c, jtagmkI.c, jtagmkII.c, stk500v2.c, usbasp.c,
usbtiny.c: Convert static programmer data into dynamically allocated
data.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@764 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-07 20:36:12 +00:00
Joerg Wunsch f5c3910d48 main.c, pgm.c, pgm.h: Add the -x option to pass extended parameters to
the programmer backend.

jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.

avrdude.1, doc/avrdude.texi: Document all of the above.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:16 +00:00
Joerg Wunsch b8a306c048 safemode.c: Obtain progname from avrdude.h rather than trying to roll our
own (duplicate) copy of it.

other files: Constify char pointers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@725 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-30 13:41:54 +00:00
Joerg Wunsch 27e16e8371 Something I always wanted to do: replace all those private "extern"
declarations in each file by a central header file "avrdude.h".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@721 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-01-24 21:07:54 +00:00
Joerg Wunsch f7f185f176 In jtagmkII_paged_write(), remove a debugging
usleep(1000000) that accidentally crept in in rev 1.19.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@702 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 16:48:52 +00:00
Joerg Wunsch 7e20e7571f Make the code compile warning-free:
- declare a dummy "struct timezone" for some Win32 systems (MinGW)
- fix a few printf() argument types
- get rid off the prevailing "all filedescriptors are of type int"
  attitude

The last item required a large sweep across the code, in order to
replace all "int fd"s by "struct filedescriptor *fd"s, and pass
pointers (as we cannot pass a union directly).  In return, the
code is now supposed to be fully 64-bit safe, rather than relying
on a 64-bit pointer being converted to a (32-bit) int and back
to a pointer as we did previously.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@694 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-11 12:47:35 +00:00
Joerg Wunsch 84b633e41d Implement EEPROM access through debugWire.
* jtagmkII.c: Extend the jtagmkII_read_byte() and
jtagmkII_write_byte() methods to handle EEPROM through
debugWire.

* avrpart.h: Implement the "flash instruction" parameter.
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)

* avrdude.1: Document the EEPROM access through dW.
* doc/avrdude.texi: (Ditto.)

* tools/get-dw-params.xsl: Extend to extract the flash
instruction field.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@693 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-23 07:07:06 +00:00
Joerg Wunsch 0e054fac95 In jtagmkII_read_byte() and jtagmkII_write_byte(), return an error
upon failure now that the upper layers won't fall back to the cmd()
method anymore in that case.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@691 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-21 16:13:08 +00:00
Joerg Wunsch 9b9df3e773 Implement debugWire programming support. Several limitations are
imposed by debugWire itself, so effectively, only flash ROM can be
read and written.

Currently, the required changes to avrdude.conf.in are only present
for the ATtiny44.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@688 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 23:23:37 +00:00
Joerg Wunsch afb13a9936 Replace the fallback of avr_read_byte() and avr_write_byte() to
avr_read_byte_default() and avr_write_byte_default (resp.) by directly
calling the latter functions from within all programmers that don't
implement their own read_byte()/write_byte() methods.  In turn, make the
read_byte() and write_byte() methods mandatory, and the cmd() method
(direct ISP command) optional instead (it's effectively mandatory for
any programmer using avr_read_byte_default()/avr_write_byte_default()
though).  Remove all the pointless cmd() method stubs from those programmers
that don't need it.

Eliminate avr_read_byte() as it was now completely identical to
pgm->read_byte().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@684 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 15:04:09 +00:00
Joerg Wunsch 31f93ccb59 Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
Joerg Wunsch 4e81a6be72 Implement a flags field in struct serdev, and populate it with a flag
that indicates whether the underlying communication can dynamically
change its speed or not.  This flag is set for true serial
communication but clear for USB communication.  Don't try to adjust
the speed when talking over a communication channel that doesn't
support it.  (The Dragon does not even support the respective
parameter.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@676 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-27 08:45:47 +00:00
Joerg Wunsch 90d6100d88 Add support for the AVR Dragon (JTAG and ISP mode).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@675 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-26 21:14:10 +00:00
Joerg Wunsch 9a961e3054 Translate numerical response codes to strings.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@650 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-07 19:57:59 +00:00
Joerg Wunsch e3963eb464 Fix a broken indentation.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@649 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-07 19:37:41 +00:00
Joerg Wunsch 8d207dbaf1 When failing to start in ISP mode, try debugWire instead. This
requires the user to eventually restart AVRDUE from scratch then.

jtagmkII_reset() had to get a second parameter in order to record
the reset mode.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@647 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 22:37:30 +00:00
Joerg Wunsch 995bd68034 Add support for the JTAG ICE mkII in ISP mode.
* avrdude.conf.in (jtag2isp): New programmer entry.
* config_gram.y: Add K_JTAG_MKII_ISP.
* jtagmkII.c: Restructure and export some more functions.
* jtagmkII.h: Declare exported functions.
* jtagmkII_private.h: Prepare file to be included in stk500v2.c.
* lexer.l: Add jtagmkii_isp token.
* stk500v2.c: Implement glue to jtagmkII.c.
* stk500v2.h: Declare stk500v2_jtagmkII_initpgm().
* avrdude.1: Document the new programmer support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@643 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 20:06:07 +00:00
Joerg Wunsch d98636cfad Contributed by dcm@mit.edu: add support for the
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-01-12 23:13:50 +00:00
Joerg Wunsch 8e5b230e47 In jtagmkII_paged_write(), default the pages size to 256 early enough
so the buffer will then be allocated correctly.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@532 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-26 12:16:45 +00:00