Add CMake project

This commit is contained in:
Marius Greuel 2021-12-20 17:50:42 +01:00
parent 868895e2e0
commit fbdb6a98c0
5 changed files with 598 additions and 1 deletions

View File

@ -2,6 +2,13 @@
root = true root = true
[{CMakeLists.txt,*.cmake}]
charset = utf-8
tab_width = 4
indent_size = 4
indent_style = space
trim_trailing_whitespace = true
[{bootstrap,configure.ac,avrdude.spec.in,Makefile.am}] [{bootstrap,configure.ac,avrdude.spec.in,Makefile.am}]
charset = utf-8 charset = utf-8
tab_width = 4 tab_width = 4

5
.gitignore vendored
View File

@ -41,6 +41,11 @@ ylwrap
*.a *.a
*.la *.la
# CMake
out/
build/
build_*/
# Visual Studio # Visual Studio
.vs/ .vs/
[Dd]ebug/ [Dd]ebug/

458
src/CMakeLists.txt Normal file
View File

@ -0,0 +1,458 @@
#
# CMakeLists.txt - CMake project for AVRDUDE
# Copyright (C) 2021 Marius Greuel
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# Typical usage:
# cmake -B build
# cmake --build build
cmake_minimum_required(VERSION 3.12)
project(avrdude VERSION 6.5.0.20211213)
set(CMAKE_C_STANDARD 11)
set(CMAKE_C_STANDARD_REQUIRED True)
option(BUILD_DOC "Enable building documents" OFF)
option(HAVE_LINUXGPIO "Enable Linux sysfs GPIO support" OFF)
option(HAVE_LINUXSPI "Enable Linux SPI support" OFF)
option(HAVE_PARPORT "Enable parallel port support" OFF)
option(USE_EXTERNAL "Use local code from the 'external' folder" OFF)
option(USE_LIBUSBWIN32 "Prefer libusb-win32 over libusb" OFF)
option(DEBUG_CMAKE "Enable debugging output for this CMake project" OFF)
include(CheckIncludeFile)
include(CheckFunctionExists)
include(GNUInstallDirs)
set(CONFIG_DIR "${CMAKE_INSTALL_FULL_SYSCONFDIR}")
set(AVRDUDE_EXTERNAL_PATH "${PROJECT_SOURCE_DIR}/external")
# =====================================
# Detect Flex and Bison
# =====================================
find_package(FLEX)
if(FLEX_FOUND)
FLEX_TARGET(Parser lexer.l "${PROJECT_BINARY_DIR}/lexer.c")
else()
message(SEND_ERROR "This CMake project requires flex, which is not installed on your system." )
endif()
find_package(BISON)
if(BISON_FOUND)
BISON_TARGET(Parser config_gram.y "${PROJECT_BINARY_DIR}/config_gram.c" DEFINES_FILE "${PROJECT_BINARY_DIR}/config_gram.h")
else()
message(SEND_ERROR "This CMake project requires bison, which is not installed on your system." )
endif()
# =====================================
# Detect headers
# =====================================
check_include_file(stdint.h HAVE_STDINT_H)
check_include_file(stdlib.h HAVE_STDLIB_H)
check_include_file(inttypes.h HAVE_INTTYPES_H)
check_include_file(netinet/in.h HAVE_NETINET_IN_H)
# =====================================
# Detect functions
# =====================================
check_function_exists(usleep HAVE_USLEEP)
check_function_exists(getaddrinfo HAVE_GETADDRINFO)
check_function_exists(gettimeofday HAVE_GETTIMEOFDAY)
check_function_exists(strcasecmp HAVE_STRCASECMP)
# =====================================
# Detect installed libraries
# =====================================
# Prefer static libraries over DLLs on Windows
if(WIN32)
set(PREFERRED_LIBELF libelf.a elf)
set(PREFERRED_LIBUSB libusb.a usb)
set(PREFERRED_LIBUSB_1_0 libusb-1.0.a usb-1.0)
set(PREFERRED_LIBHIDAPI libhidapi.a libhidapi-libusb.a libhidapi-hidraw.a hidapi hidapi-libusb hidapi-hidraw)
set(PREFERRED_LIBFTDI libftdi.a ftdi)
set(PREFERRED_LIBFTDI1 libftdi1.a ftdi1)
else()
set(PREFERRED_LIBELF elf)
set(PREFERRED_LIBUSB usb)
set(PREFERRED_LIBUSB_1_0 usb-1.0)
set(PREFERRED_LIBHIDAPI hidapi hidapi-libusb hidapi-hidraw)
set(PREFERRED_LIBFTDI ftdi)
set(PREFERRED_LIBFTDI1 ftdi1)
endif()
# -------------------------------------
# Find libelf
find_library(HAVE_LIBELF NAMES ${PREFERRED_LIBELF})
if(HAVE_LIBELF)
set(LIB_LIBELF ${HAVE_LIBELF})
check_include_file(libelf.h HAVE_LIBELF_H)
check_include_file(libelf/libelf.h HAVE_LIBELF_LIBELF_H)
endif()
# -------------------------------------
# Find libusb
find_library(HAVE_LIBUSB NAMES ${PREFERRED_LIBUSB})
if(HAVE_LIBUSB)
set(LIB_LIBUSB ${HAVE_LIBUSB})
endif()
find_library(HAVE_LIBUSB_1_0 NAMES ${PREFERRED_LIBUSB_1_0})
if(HAVE_LIBUSB_1_0)
set(LIB_LIBUSB_1_0 ${HAVE_LIBUSB_1_0})
endif()
find_library(HAVE_LIBUSB_WIN32 NAMES libusb0.a usb0)
if(HAVE_LIBUSB OR HAVE_LIBUSB_1_0 OR HAVE_LIBUSB_WIN32)
check_include_file(usb.h HAVE_USB_H)
check_include_file(lusb0_usb.h HAVE_LUSB0_USB_H)
check_include_file(libusb.h HAVE_LIBUSB_H)
check_include_file(libusb-1.0/libusb.h HAVE_LIBUSB_1_0_LIBUSB_H)
if((USE_LIBUSBWIN32 OR NOT HAVE_LIBUSB) AND HAVE_LIBUSB_WIN32)
set(HAVE_LIBUSB ${HAVE_LIBUSB_WIN32})
set(LIB_LIBUSB ${HAVE_LIBUSB_WIN32})
unset(HAVE_USB_H CACHE)
elseif(NOT HAVE_USB_H)
find_path(LIBUSB_COMPAT_DIR libusb-compat/usb.h)
if(LIBUSB_COMPAT_DIR)
set(LIBUSB_COMPAT_DIR ${LIBUSB_COMPAT_DIR}/libusb-compat)
set(HAVE_USB_H 1)
else()
unset(LIBUSB_COMPAT_DIR CACHE)
endif()
endif()
endif()
# -------------------------------------
# Find libhidapi
find_library(HAVE_LIBHIDAPI NAMES ${PREFERRED_LIBHIDAPI})
if(HAVE_LIBHIDAPI)
set(LIB_LIBHIDAPI ${HAVE_LIBHIDAPI})
check_include_file(hidapi/hidapi.h HAVE_HIDAPI_HIDAPI_H)
endif()
find_library(HAVE_LIBHID NAMES hid)
# -------------------------------------
# Find libftdi
find_library(HAVE_LIBFTDI NAMES ${PREFERRED_LIBFTDI})
if(HAVE_LIBFTDI)
set(LIB_LIBFTDI ${HAVE_LIBFTDI})
set(HAVE_LIBFTDI_TYPE_232H 1)
endif()
find_library(HAVE_LIBFTDI1 NAMES ${PREFERRED_LIBFTDI1})
if(HAVE_LIBFTDI1)
set(LIB_LIBFTDI1 ${HAVE_LIBFTDI1})
set(HAVE_LIBFTDI_TYPE_232H 1)
endif()
# -------------------------------------
# Find libreadline
find_library(HAVE_LIBREADLINE NAMES readline)
if(HAVE_LIBREADLINE)
set(LIB_LIBREADLINE ${HAVE_LIBREADLINE})
endif()
# =====================================
# Setup target specific options
# =====================================
if(WIN32)
set(HAVE_LIBWS2_32 1)
set(EXTRA_WINDOWS_LIBRARIES setupapi ws2_32)
add_compile_definitions(WIN32NATIVE=1)
endif()
if(NOT WIN32)
set(LIB_MATH m)
#add_compile_options(-Wall -Wextra -pedantic)
endif()
# =====================================
# Setup default port names
# =====================================
if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
set(DEFAULT_PAR_PORT "/dev/parport0")
set(DEFAULT_SER_PORT "/dev/ttyS0")
elseif (CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
set(DEFAULT_PAR_PORT "/dev/ppi0")
set(DEFAULT_SER_PORT "/dev/cuad0")
elseif (CMAKE_SYSTEM_NAME STREQUAL "Solaris")
set(DEFAULT_PAR_PORT "/dev/printers/0")
set(DEFAULT_SER_PORT "/dev/term/a")
elseif (CMAKE_SYSTEM_NAME STREQUAL "Windows")
set(DEFAULT_PAR_PORT "lpt1")
set(DEFAULT_SER_PORT "com1")
else()
set(DEFAULT_PAR_PORT "unknown")
set(DEFAULT_SER_PORT "unknown")
endif()
# =====================================
# Configuration
# =====================================
message(STATUS "Configuration summary:")
message(STATUS "----------------------")
if (DEBUG_CMAKE)
message(STATUS "CMAKE_HOST_SYSTEM: ${CMAKE_HOST_SYSTEM}")
message(STATUS "CMAKE_SYSTEM: ${CMAKE_SYSTEM}")
message(STATUS "CONFIG_DIR: ${CONFIG_DIR}")
message(STATUS "USE_EXTERNAL: ${USE_EXTERNAL}")
message(STATUS "USE_LIBUSBWIN32: ${USE_LIBUSBWIN32}")
message(STATUS "HAVE_LIBELF: ${HAVE_LIBELF}")
message(STATUS "HAVE_LIBUSB: ${HAVE_LIBUSB}")
message(STATUS "HAVE_LIBUSB_1_0: ${HAVE_LIBUSB_1_0}")
message(STATUS "HAVE_LIBUSB_WIN32: ${HAVE_LIBUSB_WIN32}")
message(STATUS "HAVE_LIBHIDAPI: ${HAVE_LIBHIDAPI}")
message(STATUS "HAVE_LIBFTDI: ${HAVE_LIBFTDI}")
message(STATUS "HAVE_LIBFTDI1: ${HAVE_LIBFTDI1}")
message(STATUS "HAVE_LIBREADLINE: ${HAVE_LIBREADLINE}")
message(STATUS "HAVE_LIBWS2_32: ${HAVE_LIBWS2_32}")
message(STATUS "HAVE_LIBELF_H: ${HAVE_LIBELF_H}")
message(STATUS "HAVE_LIBELF_LIBELF_H: ${HAVE_LIBELF_LIBELF_H}")
message(STATUS "HAVE_USB_H: ${HAVE_USB_H}")
message(STATUS "HAVE_LUSB0_USB_H: ${HAVE_LUSB0_USB_H}")
message(STATUS "HAVE_LIBUSB_H: ${HAVE_LIBUSB_H}")
message(STATUS "HAVE_LIBUSB_1_0_LIBUSB_H: ${HAVE_LIBUSB_1_0_LIBUSB_H}")
message(STATUS "HAVE_HIDAPI_HIDAPI_H: ${HAVE_HIDAPI_HIDAPI_H}")
message(STATUS "LIBUSB_COMPAT_DIR: ${LIBUSB_COMPAT_DIR}")
message(STATUS "----------------------")
endif()
if(HAVE_LIBELF)
message(STATUS "DO HAVE libelf")
else()
message(STATUS "DON'T HAVE libelf")
endif()
if(HAVE_LIBUSB)
message(STATUS "DO HAVE libusb")
else()
message(STATUS "DON'T HAVE libusb")
endif()
if(HAVE_LIBUSB_1_0)
message(STATUS "DO HAVE libusb_1_0")
else()
message(STATUS "DON'T HAVE libusb_1_0")
endif()
if(HAVE_LIBHIDAPI)
message(STATUS "DO HAVE libhidapi")
else()
message(STATUS "DON'T HAVE libhidapi")
endif()
if(HAVE_LIBFTDI)
if(HAVE_LIBFTDI1)
message(STATUS "DO HAVE libftdi (but prefer to use libftdi1)")
else()
message(STATUS "DO HAVE libftdi")
endif()
else()
message(STATUS "DON'T HAVE libftdi")
endif()
if(HAVE_LIBFTDI1)
message(STATUS "DO HAVE libftdi1")
else()
message(STATUS "DON'T HAVE libftdi1")
endif()
if(BUILD_DOC)
message(STATUS "ENABLED doc")
else()
message(STATUS "DISABLED doc")
endif()
if(HAVE_PARPORT)
message(STATUS "ENABLED parport")
else()
message(STATUS "DISABLED parport")
endif()
if(HAVE_LINUXGPIO)
message(STATUS "ENABLED linuxgpio")
else()
message(STATUS "DISABLED linuxgpio")
endif()
if(HAVE_LINUXSPI)
message(STATUS "ENABLED linuxspi")
else()
message(STATUS "DISABLED linuxspi")
endif()
message(STATUS "----------------------")
# =====================================
# Configure files
# =====================================
configure_file(cmake_config.h.in ac_cfg.h)
configure_file(avrdude.conf.in avrdude.conf)
configure_file(avrdude.spec.in avrdude.spec)
# =====================================
# Project
# =====================================
add_library(libavrdude STATIC
ac_cfg.h
arduino.h
arduino.c
avr.c
avr910.c
avr910.h
avrdude.h
avrftdi.c
avrftdi.h
avrftdi_private.h
avrftdi_tpi.c
avrftdi_tpi.h
avrpart.c
bitbang.c
bitbang.h
buspirate.c
buspirate.h
butterfly.c
butterfly.h
config.c
config.h
confwin.c
crc16.c
crc16.h
dfu.c
dfu.h
fileio.c
flip1.c
flip1.h
flip2.c
flip2.h
freebsd_ppi.h
ft245r.c
ft245r.h
jtagmkI.c
jtagmkI.h
jtagmkI_private.h
jtagmkII.c
jtagmkII.h
jtagmkII_private.h
jtag3.c
jtag3.h
jtag3_private.h
libavrdude.h
linuxgpio.c
linuxgpio.h
linuxspi.c
linuxspi.h
linux_ppdev.h
lists.c
my_ddk_hidsdi.h
par.c
par.h
pgm.c
pgm_type.c
pickit2.c
pickit2.h
pindefs.c
ppi.c
ppi.h
ppiwin.c
safemode.c
serbb.h
serbb_posix.c
serbb_win32.c
ser_avrdoper.c
ser_posix.c
ser_win32.c
solaris_ecpp.h
stk500.c
stk500.h
stk500_private.h
stk500v2.c
stk500v2.h
stk500v2_private.h
stk500generic.c
stk500generic.h
tpi.h
usbasp.c
usbasp.h
usbdevs.h
usb_hidapi.c
usb_libusb.c
usbtiny.h
usbtiny.c
update.c
wiring.h
wiring.c
xbee.h
xbee.c
${FLEX_Parser_OUTPUTS}
${BISON_Parser_OUTPUTS}
)
target_include_directories(libavrdude
PUBLIC
"${PROJECT_SOURCE_DIR}"
"${PROJECT_BINARY_DIR}"
"${LIBUSB_COMPAT_DIR}"
"${EXTRA_WINDOWS_INCLUDES}"
)
target_link_libraries(libavrdude
PUBLIC
${LIB_MATH}
${LIB_LIBELF}
${LIB_LIBUSB}
${LIB_LIBUSB_1_0}
${LIB_LIBHIDAPI}
${LIB_LIBFTDI}
${LIB_LIBFTDI1}
${LIB_LIBREADLINE}
${EXTRA_WINDOWS_LIBRARIES}
)
add_executable(avrdude
main.c
term.c
term.h
)
target_link_libraries(avrdude PUBLIC libavrdude)
# =====================================
# Install
# =====================================
install(TARGETS avrdude DESTINATION bin)
install(FILES "${PROJECT_BINARY_DIR}/avrdude.conf" TYPE SYSCONF)
install(FILES avrdude.1 TYPE MAN)

View File

@ -1311,7 +1311,7 @@ programmer
connection_type = usb; connection_type = usb;
; ;
@HAVE_PARPORT_BEGIN@ Inclusion of the following depends on --enable-parport @HAVE_PARPORT_BEGIN@
# Parallel port programmers. # Parallel port programmers.
programmer programmer

127
src/cmake_config.h.in Normal file
View File

@ -0,0 +1,127 @@
/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2021 Marius Greuel
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef _MSC_VER
#include "msvc/msvc_compat.h"
#endif
#define VERSION "@PROJECT_VERSION@"
#define CONFIG_DIR "${CONFIG_DIR}"
/* Options */
/* Linux sysfs GPIO support enabled */
#cmakedefine HAVE_LINUXGPIO 1
/* Linux SPI support enabled */
#cmakedefine HAVE_LINUXSPI 1
/* Parallel port access enabled */
#cmakedefine HAVE_PARPORT 1
/* ----- Functions ----- */
/* Define to 1 if you have the `usleep' function. */
#cmakedefine HAVE_USLEEP 1
/* Define to 1 if you have the `getaddrinfo' function. */
#cmakedefine HAVE_GETADDRINFO 1
/* Define to 1 if you have the `gettimeofday' function. */
#cmakedefine HAVE_GETTIMEOFDAY 1
/* Define to 1 if you have the `strcasecmp' function. */
#cmakedefine HAVE_STRCASECMP 1
/* Define if lex/flex has yylex_destroy */
#cmakedefine HAVE_YYLEX_DESTROY 1
/* ----- Libraries and Headers ----- */
/* Define to 1 if the system has the type `uint_t'. */
#cmakedefine HAVE_UINT_T 1
/* Define to 1 if the system has the type `ulong_t'. */
#cmakedefine HAVE_ULONG_T 1
/* Define to 1 if you have the <stdint.h> header file. */
#cmakedefine HAVE_STDINT_H 1
/* Define to 1 if you have the <stdlib.h> header file. */
#cmakedefine HAVE_STDLIB_H 1
/* Define to 1 if you have the <inttypes.h> header file. */
#cmakedefine HAVE_INTTYPES_H 1
/* Define if ELF support is enabled via libelf */
#cmakedefine HAVE_LIBELF 1
/* Define to 1 if you have the <libelf.h> header file. */
#cmakedefine HAVE_LIBELF_H 1
/* Define to 1 if you have the <libelf/libelf.h> header file. */
#cmakedefine HAVE_LIBELF_LIBELF_H 1
/* Define if USB support is enabled via libusb */
#cmakedefine HAVE_LIBUSB 1
/* Define if USB support is enabled via a libusb-1.0 compatible libusb */
#cmakedefine HAVE_LIBUSB_1_0 1
/* Define if USB support is enabled via a libusb-win32 compatible libusb */
#cmakedefine HAVE_LIBUSB_WIN32 1
/* Define to 1 if you have the <usb.h> header file. */
#cmakedefine HAVE_USB_H 1
/* Define to 1 if you have the <lusb0_usb.h> header file. */
#cmakedefine HAVE_LUSB0_USB_H 1
/* Define to 1 if you have the <libusb.h> header file. */
#cmakedefine HAVE_LIBUSB_H 1
/* Define to 1 if you have the <libusb-1.0/libusb.h> header file. */
#cmakedefine HAVE_LIBUSB_1_0_LIBUSB_H 1
/* Define if HID support is enabled via the Win32 DDK */
#cmakedefine HAVE_LIBHID 1
/* Define if HID support is enabled via libhidapi */
#cmakedefine HAVE_LIBHIDAPI 1
/* Define to 1 if you have the <hidapi/hidapi.h> header file. */
#cmakedefine HAVE_HIDAPI_HIDAPI_H 1
/* Define if FTDI support is enabled via libftdi */
#cmakedefine HAVE_LIBFTDI 1
/* Define if FTDI support is enabled via libftdi1 */
#cmakedefine HAVE_LIBFTDI1 1
/* Define if libftdi supports FT232H, libftdi version >= 0.20 */
#cmakedefine HAVE_LIBFTDI_TYPE_232H 1
/* Define to 1 if you have the `readline' library (-lreadline). */
#cmakedefine HAVE_LIBREADLINE 1
/* Define to 1 if you have the `ws2_32' library (-lws2_32). */
#cmakedefine HAVE_LIBWS2_32 1
/* Define to 1 if you have the <netinet/in.h> header file. */
#cmakedefine HAVE_NETINET_IN_H 1