bug #38172: avrftdi: Incorrect information in avrdude.conf

* avrdude.conf.in (avrftdi): fix comments about ACBUS vs. ADBUS;
add a comment that the MPSSE signals are fixed by the FTDI
hardware and cannot be changed



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1133 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Joerg Wunsch 2013-01-26 20:08:40 +00:00
parent 274c518121
commit fa982bcb50
2 changed files with 15 additions and 3 deletions

View File

@ -1,3 +1,10 @@
2013-01-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #38172: avrftdi: Incorrect information in avrdude.conf
* avrdude.conf.in (avrftdi): fix comments about ACBUS vs. ADBUS;
add a comment that the MPSSE signals are fixed by the FTDI
hardware and cannot be changed
2013-01-09 Rene Liebscher <R.Liebscher@gmx.de>
patch #7165 Add support for bitbanging GPIO lines using the Linux sysf GPIO interface

View File

@ -366,6 +366,11 @@ programmer
# The drivers will look for a specific device and use the first one found.
# If you have mulitple devices, then look for unique information (like SN)
# And fill that in here.
#
# Note that the pin numbers for the main ISP signals (reset, sck,
# mosi, miso) are fixed and cannot be changed, since they must match
# the way the Multi-Protocol Synchronous Serial Engine (MPSSE) of
# these FTDI ICs has been designed.
programmer
id = "avrftdi";
@ -378,17 +383,17 @@ programmer
usbproduct = "";
usbdev = "A";
usbsn = "";
#ISP-signals - lower ACBUS-Nibble (default)
#ISP-signals - lower ADBUS-Nibble (default)
reset = 4;
sck = 1;
mosi = 2;
miso = 3;
#LED SIGNALs - higher ACBUS-Nibble
#LED SIGNALs - higher ADBUS-Nibble
# errled = 5;
# rdyled = 6;
# pgmled = 7;
# vfyled = 8;
#Buffer Signal - ADBUS - Nibble
#Buffer Signal - ACBUS - Nibble
# buff = 9;
;
# This is an implementation of the above with a buffer IC (74AC244) and