avr32 cleanup, now does flash read and verify

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@870 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
dhoerl 2009-10-12 16:44:30 +00:00
parent a13dec9e18
commit ee73e2e873
6 changed files with 141 additions and 267 deletions

View File

@ -1,7 +1,15 @@
2009-10-12 David Hoerl <dhoerl@mac.com>
* main.c: removed some avr32 code that was pushed into jtagmkII.c
* jtagmkII.c: consolodated the avr32 reset code and avr32_chipreset
* avrpart.h: modified AVRPART flags for avr32
* lexer.l: added is_avr32 flag - only way to get yacc code to set flag
* avrdude.conf.in: updated avr32 section to include "is_avr32" flag
2009-10-12 David Hoerl <dhoerl@mac.com>
* config_gram.y: Restored inadvertantly removed buspirate entry
* lexer.l.y: Restored inadvertantly removed buspirate entry
* lexer.l: Restored inadvertantly removed buspirate entry
2009-10-12 Michal Ludvig <mludvig@logix.net.nz>

View File

@ -15051,119 +15051,11 @@ part
memory "flash"
paged = yes;
page_size = 512; # bytes
num_pages = 1024 ; # numeric
size = 0x00080000;
offset = 0x80000000;
readsize = 512;
page_size = 512; # bytes
readsize = 512; # bytes
num_pages = 1024; # could be set dynamicly
size = 0x00080000; # could be set dynamicly
offset = 0x80000000;
;
;
# part
# id = <id> ; # quoted string
# desc = <description> ; # quoted string
# has_jtag = <yes/no> ; # part has JTAG i/f
# has_debugwire = <yes/no> ; # part has debugWire i/f
# devicecode = <num> ; # deprecated, use stk500_devcode
# stk500_devcode = <num> ; # numeric
# avr910_devcode = <num> ; # numeric
# signature = <num> <num> <num> ; # signature bytes
# chip_erase_delay = <num> ; # micro-seconds
# reset = dedicated | io;
# retry_pulse = reset | sck;
# pgm_enable = <instruction format> ;
# chip_erase = <instruction format> ;
# chip_erase_delay = <num> ; # chip erase delay (us)
# # STK500 parameters (parallel programming IO lines)
# pagel = <num> ; # pin name in hex, i.e., 0xD7
# bs2 = <num> ; # pin name in hex, i.e., 0xA0
# serial = <yes/no> ; # can use serial downloading
# parallel = <yes/no/pseudo>; # can use par. programming
# # STK500v2 parameters, to be taken from Atmel's XML files
# timeout = <num> ;
# stabdelay = <num> ;
# cmdexedelay = <num> ;
# synchloops = <num> ;
# bytedelay = <num> ;
# pollvalue = <num> ;
# pollindex = <num> ;
# predelay = <num> ;
# postdelay = <num> ;
# pollmethod = <num> ;
# mode = <num> ;
# delay = <num> ;
# blocksize = <num> ;
# readsize = <num> ;
# hvspcmdexedelay = <num> ;
# # STK500v2 HV programming parameters, from XML
# pp_controlstack = <num>, <num>, ...; # PP only
# hvsp_controlstack = <num>, <num>, ...; # HVSP only
# hventerstabdelay = <num>;
# progmodedelay = <num>; # PP only
# latchcycles = <num>;
# togglevtg = <num>;
# poweroffdelay = <num>;
# resetdelayms = <num>;
# resetdelayus = <num>;
# hvleavestabdelay = <num>;
# resetdelay = <num>;
# synchcycles = <num>; # HVSP only
# chiperasepulsewidth = <num>; # PP only
# chiperasepolltimeout = <num>;
# chiperasetime = <num>; # HVSP only
# programfusepulsewidth = <num>; # PP only
# programfusepolltimeout = <num>;
# programlockpulsewidth = <num>; # PP only
# programlockpolltimeout = <num>;
# # JTAG ICE mkII parameters, also from XML files
# allowfullpagebitstream = <yes/no> ;
# enablepageprogramming = <yes/no> ;
# idr = <num> ; # IO addr of IDR (OCD) reg.
# rampz = <num> ; # IO addr of RAMPZ reg.
# spmcr = <num> ; # mem addr of SPMC[S]R reg.
# eecr = <num> ; # mem addr of EECR reg.
# # (only when != 0x3c)
#
# memory <memtype>
# paged = <yes/no> ; # yes / no
# size = <num> ; # bytes
# page_size = <num> ; # bytes
# num_pages = <num> ; # numeric
# min_write_delay = <num> ; # micro-seconds
# max_write_delay = <num> ; # micro-seconds
# readback_p1 = <num> ; # byte value
# readback_p2 = <num> ; # byte value
# pwroff_after_write = <yes/no> ; # yes / no
# read = <instruction format> ;
# write = <instruction format> ;
# read_lo = <instruction format> ;
# read_hi = <instruction format> ;
# write_lo = <instruction format> ;
# write_hi = <instruction format> ;
# loadpage_lo = <instruction format> ;
# loadpage_hi = <instruction format> ;
# writepage = <instruction format> ;
# ;
# ;
# <flash_read_delay time="1000" to_rev="8"/>
# <avr_reset domains="5"/>
# <core_name>STILETTO</core_name>
# <flashc id="I7503" name="FLASHC" revision="2.0.0" address="0xFFFE1400" page_size="512" pages_pr_region="64" flash_size="524288">
# <fuses gp_hi_offset="0xC" gp_lo_offset="0x10"/>
# </flashc>
# <pm address="0xFFFF0C00"/>
# <memory>
# <block name="EBI_CS0" type="EXT_SRAM" address="0xC0000000" size="0x01000000"/>
# <block name="EBI_CS1" type="EXT_SRAM" address="0xD0000000" size="0x08000000"/>
# <block name="EBI_CS2" type="EXT_SRAM" address="0xC8000000" size="0x01000000"/>
# <block name="EBI_CS3" type="EXT_SRAM" address="0xCC000000" size="0x01000000"/>
# <block name="FLASH" type="FLASH" address="0x80000000" size="0x00080000"/>
# <block name="SRAM" type="INT_SRAM" address="0x00000000" size="0x00010000"/>
# <block name="USBB_SLAVE" type="INT_SRAM" address="0xE0000000" size="0x00800000"/>
# </memory>

View File

@ -90,7 +90,8 @@ typedef struct opcode {
#define AVRPART_HAS_DW 0x0040 /* part has a debugWire i/f */
#define AVRPART_HAS_PDI 0x0080 /* part has PDI i/f rather than ISP (ATxmega) */
#define AVRPART_AVR32 0x0100 /* part is in AVR32 family */
#define AVRPART_CHIP_ERASE 0x0200 /* part will undergo chip erase */
#define AVRPART_INIT_SMC 0x0200 /* part will undergo chip erase */
#define AVRPART_WRITE 0x0400 /* at least one write operation specified */
#define AVR_DESCLEN 64
#define AVR_IDLEN 32

View File

@ -2563,6 +2563,10 @@ static int jtagmkII_avr32_reset(PROGRAMMER * pgm, unsigned char val, unsigned ch
int status;
unsigned char buf[3], *resp;
if(verbose) fprintf(stderr,
"%s: jtagmkII_avr32_reset(%2.2x)\n",
progname, val);
buf[0] = CMND_GET_IR;
buf[1] = 0x0C;
status = jtagmkII_send(pgm, buf, 2);
@ -2596,9 +2600,11 @@ static int jtagmkII_avr32_reset(PROGRAMMER * pgm, unsigned char val, unsigned ch
return 0;
}
#define AVR32_RESET_READ_IR 0x0001
#define AVR32_RESET_READ_READ_CHIPINFO 0x0002
#define AVR32_SET4RUNNING 0x0004
#define AVR32_RESET_READ 0x0001
#define AVR32_RESET_WRITE 0x0002
#define AVR32_RESET_CHIP_ERASE 0x0004
#define AVR32_SET4RUNNING 0x0008
//#define AVR32_RESET_COMMON (AVR32_RESET_READ | AVR32_RESET_WRITE | AVR32_RESET_CHIP_ERASE )
// At init: AVR32_RESET_READ_IR | AVR32_RESET_READ_READ_CHIPINFO
static int jtagmkII_reset32(PROGRAMMER * pgm, unsigned short flags)
@ -2608,8 +2614,12 @@ static int jtagmkII_reset32(PROGRAMMER * pgm, unsigned short flags)
unsigned long val=0;
unsigned long config0, config1;
if(verbose) fprintf(stderr,
"%s: jtagmkII_reset32(%2.2x)\n",
progname, flags);
// Happens at the start of a programming operation
if(flags & AVR32_RESET_READ_IR) {
if(flags & AVR32_RESET_READ) {
buf[0] = CMND_GET_IR;
buf[1] = 0x11;
status = jtagmkII_send(pgm, buf, 2);
@ -2620,48 +2630,63 @@ static int jtagmkII_reset32(PROGRAMMER * pgm, unsigned short flags)
{lineno = __LINE__; goto eRR;};
}
// AVR_RESET(0x1F), AVR_RESET(0x07)
status = jtagmkII_avr32_reset(pgm, 0x1F, 0x01, 0x00);
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_avr32_reset(pgm, 0x07, 0x11, 0x1F);
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
if(val != 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DC, 0x01);
if(val != 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DC, 0x01, AVR32_DC_ABORT | AVR32_DC_RESET | AVR32_DC_DBE | AVR32_DC_DBR);
if(status < 0) return -1;
// Read OCD Register a bunch of times...
for(j=0; j<21; ++j) {
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
if(flags & (AVR32_RESET_WRITE | AVR32_SET4RUNNING)) {
// AVR_RESET(0x1F)
status = jtagmkII_avr32_reset(pgm, 0x1F, 0x01, 0x00);
if(status < 0) {lineno = __LINE__; goto eRR;}
// AVR_RESET(0x07)
status = jtagmkII_avr32_reset(pgm, 0x07, 0x11, 0x1F);
if(status < 0) {lineno = __LINE__; goto eRR;}
}
if(val != 0x04000000) {lineno = __LINE__; goto eRR;}
// AVR_RESET(0x00)
status = jtagmkII_avr32_reset(pgm, 0x00, 0x01, 0x07);
if(status < 0) {lineno = __LINE__; goto eRR;}
for(j=0; j<2; ++j) {
//if(flags & AVR32_RESET_COMMON)
{
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
if(val == ERROR_SAB) {lineno = __LINE__; goto eRR;}
if((val&0x05000020) != 0x05000020) {lineno = __LINE__; goto eRR;}
if(val != 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DC, 0x01);
if(val != 0) {lineno = __LINE__; goto eRR;}
}
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe7b00044); // mtdr 272, R0
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCSR, 0x01);
if(val != 0x00000001) {lineno = __LINE__; goto eRR;}
if(flags & (AVR32_RESET_READ | AVR32_RESET_CHIP_ERASE)) {
status = jtagmkII_write_SABaddr(pgm, AVR32_DC, 0x01, AVR32_DC_DBE | AVR32_DC_DBR);
if(status < 0) return -1;
}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCCPU, 0x01);
if(val != 0x00000000) {lineno = __LINE__; goto eRR;}
if(flags & (AVR32_RESET_WRITE | AVR32_SET4RUNNING)) {
status = jtagmkII_write_SABaddr(pgm, AVR32_DC, 0x01, AVR32_DC_ABORT | AVR32_DC_RESET | AVR32_DC_DBE | AVR32_DC_DBR);
if(status < 0) return -1;
for(j=0; j<21; ++j) {
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
}
if(val != 0x04000000) {lineno = __LINE__; goto eRR;}
// AVR_RESET(0x00)
status = jtagmkII_avr32_reset(pgm, 0x00, 0x01, 0x07);
if(status < 0) {lineno = __LINE__; goto eRR;}
}
// if(flags & (AVR32_RESET_READ | AVR32_RESET_WRITE))
{
for(j=0; j<2; ++j) {
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
if(val == ERROR_SAB) {lineno = __LINE__; goto eRR;}
if((val&0x05000020) != 0x05000020) {lineno = __LINE__; goto eRR;}
}
}
//if(flags & (AVR32_RESET_READ | AVR32_RESET_WRITE | AVR32_RESET_CHIP_ERASE))
{
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe7b00044); // mtdr 272, R0
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCSR, 0x01);
if(val != 0x00000001) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCCPU, 0x01);
if(val != 0x00000000) {lineno = __LINE__; goto eRR;}
}
if(flags & AVR32_RESET_READ_READ_CHIPINFO) {
// Read chip configuration - common for all
if(flags & (AVR32_RESET_READ | AVR32_RESET_WRITE | AVR32_RESET_CHIP_ERASE)) {
for(j=0; j<2; ++j) {
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
if(val == ERROR_SAB) {lineno = __LINE__; goto eRR;}
@ -2725,9 +2750,17 @@ static int jtagmkII_reset32(PROGRAMMER * pgm, unsigned short flags)
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe5b00045); // mtdr R0, 276
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, 0x00000010, 0x06);
val = jtagmkII_read_SABaddr(pgm, 0x00000010, 0x06); // need to recheck who does this...
if(val != 0x00000000) {lineno = __LINE__; goto eRR;}
}
if(flags & AVR32_RESET_CHIP_ERASE) {
status = jtagmkII_avr32_reset(pgm, 0x1f, 0x01, 0x00);
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_avr32_reset(pgm, 0x01, 0x11, 0x1f);
if(status < 0) {lineno = __LINE__; goto eRR;}
}
if(flags & AVR32_SET4RUNNING) {
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe1b00014); // mfsr R0, 80
if(status < 0) {lineno = __LINE__; goto eRR;}
@ -2857,7 +2890,7 @@ static int jtagmkII_smc_init32(PROGRAMMER * pgm)
*/
static int jtagmkII_initialize32(PROGRAMMER * pgm, AVRPART * p)
{
int status, ret, j;
int status, j;
unsigned char buf[6], *resp;
if (jtagmkII_setparm(pgm, PAR_DAISY_CHAIN_INFO, PDATA(pgm)->jtagchain) < 0) {
@ -2931,89 +2964,32 @@ static int jtagmkII_initialize32(PROGRAMMER * pgm, AVRPART * p)
}
free(resp);
}
if(!(p->flags & AVRPART_CHIP_ERASE))
ret = jtagmkII_reset32(pgm, AVR32_RESET_READ_IR | AVR32_RESET_READ_READ_CHIPINFO);
else
ret = 0;
return ret;
return 0;
}
static int jtagmkII_chip_erase32(PROGRAMMER * pgm, AVRPART * p)
{
int status=0, j;
unsigned char *resp, buf[3], x;
int status=0, loops;
unsigned char *resp, buf[3], x, ret[4], *retP;
unsigned long val;
unsigned int lineno;
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
if(val != 0) {lineno = __LINE__; goto eRR;}
if(verbose) fprintf(stderr,
"%s: jtagmkII_chip_erase32()\n",
progname);
val = jtagmkII_read_SABaddr(pgm, AVR32_DC, 0x01);
if(val != 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_reset32(pgm, AVR32_RESET_CHIP_ERASE);
if(status != 0) goto eRR;
// sequence of IR transitions
ret[0] = 0x01;
ret[1] = 0x05;
ret[2] = 0x01;
ret[3] = 0x00;
status = jtagmkII_write_SABaddr(pgm, AVR32_DC, 0x01, AVR32_DC_DBE | AVR32_DC_DBR);
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
if(val == ERROR_SAB) {lineno = __LINE__; goto eRR;}
if((val&0x05000020) != 0x05000020) {lineno = __LINE__; goto eRR;}
for(j=0; j<2; ++j) {
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe7b00044); // mtdr 272, R0
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCSR, 0x01);
if(val != 0x00000001) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCCPU, 0x01);
if(val != 0x00000000) {lineno = __LINE__; goto eRR;}
}
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe1b00040); // mfsr R0, 256
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe7b00044); // mtdr 272, R0
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCSR, 0x01);
if(val != 0x00000001) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCCPU, 0x01);
if(val != 0x0204098b) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DCEMU, 0x01, 0x00000000);
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe5b00045); // mtdr R0, 276
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DS, 0x01);
if(val == ERROR_SAB) {lineno = __LINE__; goto eRR;}
if((val&0x05000020) != 0x05000020) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe7b00044); // mtdr 272, R0
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCSR, 0x01);
if(val != 0x00000001) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCCPU, 0x01);
if(val != 0x00000000) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe1b00041); // mfsr R0, 260
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe7b00044); // mtdr 272, R0
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCSR, 0x01);
if(val != 0x00000001) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, AVR32_DCCPU, 0x01);
if(val != 0x00800000) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DCEMU, 0x01, 0x00000000);
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_write_SABaddr(pgm, AVR32_DINST, 0x01, 0xe5b00045); // mtdr R0, 276
if(status < 0) {lineno = __LINE__; goto eRR;}
val = jtagmkII_read_SABaddr(pgm, 0x00000010, 0x06);
if(val != 0x00000000) {lineno = __LINE__; goto eRR;}
status = jtagmkII_avr32_reset(pgm, 0x1f, 0x01, 0x00);
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_avr32_reset(pgm, 0x01, 0x11, 0x1f);
if(status < 0) {lineno = __LINE__; goto eRR;}
for(;;) {
retP = ret;
for(loops=0; loops<1000; ++loops) {
buf[0] = CMND_GET_IR;
buf[1] = 0x0F;
status = jtagmkII_send(pgm, buf, 2);
@ -3025,36 +3001,10 @@ static int jtagmkII_chip_erase32(PROGRAMMER * pgm, AVRPART * p)
}
x = resp[1];
free(resp);
if(x == 0x01) break;
}
for(;;) {
buf[0] = CMND_GET_IR;
buf[1] = 0x0F;
status = jtagmkII_send(pgm, buf, 2);
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_recv(pgm, &resp);
if (status != 2 || resp[0] != 0x87) {
{lineno = __LINE__; goto eRR;}
}
x = resp[1];
free(resp);
if(x == 0x05) break;
}
for(;;) {
buf[0] = CMND_GET_IR;
buf[1] = 0x0F;
status = jtagmkII_send(pgm, buf, 2);
if(status < 0) {lineno = __LINE__; goto eRR;}
status = jtagmkII_recv(pgm, &resp);
if (status != 2 || resp[0] != 0x87) {
{lineno = __LINE__; goto eRR;}
}
x = resp[1];
free(resp);
if(x== 0x01) break;
if(x == *retP) ++retP;
if(*retP == 0x00) break;
}
if(loops == 1000) {lineno = __LINE__; goto eRR;}
status = jtagmkII_avr32_reset(pgm, 0x00, 0x01, 0x01);
if(status < 0) {lineno = __LINE__; goto eRR;}
@ -3062,7 +3012,6 @@ static int jtagmkII_chip_erase32(PROGRAMMER * pgm, AVRPART * p)
val = jtagmkII_read_SABaddr(pgm, 0x00000010, 0x06);
if(val != 0x00000000) {lineno = __LINE__; goto eRR;}
// AVR32 "special"
buf[0] = CMND_SET_PARAMETER;
buf[1] = 0x03;
@ -3071,8 +3020,6 @@ static int jtagmkII_chip_erase32(PROGRAMMER * pgm, AVRPART * p)
status = jtagmkII_recv(pgm, &resp);
if(status < 0 || resp[0] != RSP_OK) {lineno = __LINE__; goto eRR;}
free(resp);
// pgm->initialize(pgm, p);
return 0;
@ -3369,6 +3316,25 @@ static int jtagmkII_paged_load32(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
serial_recv_timeout = 256;
if(!(p->flags & AVRPART_WRITE)) {
status = jtagmkII_reset32(pgm, AVR32_RESET_READ);
if(status != 0) goto eRR;
}
// Init SMC and set clocks
if(!(p->flags & AVRPART_INIT_SMC)) {
status = jtagmkII_smc_init32(pgm);
if(status != 0) {lineno = __LINE__; goto eRR;} // PLL 0
p->flags |= AVRPART_INIT_SMC;
}
// Init SMC and set clocks
if(!(p->flags & AVRPART_INIT_SMC)) {
status = jtagmkII_smc_init32(pgm);
if(status != 0) {lineno = __LINE__; goto eRR;} // PLL 0
p->flags |= AVRPART_INIT_SMC;
}
//fprintf(stderr, "\n pageSize=%d bytes=%d pages=%d m->offset=0x%x pgm->page_size %d\n", page_size, n_bytes, pages, m->offset, pgm->page_size);
cmd[0] = CMND_READ_MEMORY32;
@ -3377,6 +3343,8 @@ static int jtagmkII_paged_load32(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
addr = 0;
for (addr = 0; addr < n_bytes; addr += block_size) {
report_progress(addr, n_bytes, NULL);
block_size = ((n_bytes-addr) < pgm->page_size) ? (n_bytes - addr) : pgm->page_size;
if (verbose >= 3)
fprintf(stderr, "%s: jtagmkII_paged_load32(): "
@ -3404,7 +3372,6 @@ static int jtagmkII_paged_load32(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
memcpy(m->buf + addr, resp + 1, block_size);
free(resp);
report_progress(addr, n_bytes, NULL);
}
serial_recv_timeout = otimeout;
@ -3416,7 +3383,6 @@ static int jtagmkII_paged_load32(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
eRR:
serial_recv_timeout = otimeout;
free(cmd);
fprintf(stderr,
"%s: jtagmkII_paged_load32(): "
"failed at line %d (status=%x val=%lx)\n",
@ -3438,6 +3404,10 @@ static int jtagmkII_paged_write32(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
if(n_bytes == 0) return -1;
status = jtagmkII_reset32(pgm, AVR32_RESET_WRITE);
if(status != 0) goto eRR;
p->flags |= AVRPART_WRITE;
pages = (n_bytes-1)/page_size + 1;
//fprintf(stderr, "\n pageSize=%d bytes=%d pages=%d m->offset=0x%x pgm->page_size %d\n", page_size, n_bytes, pages, m->offset, pgm->page_size);
@ -3448,8 +3418,11 @@ static int jtagmkII_paged_write32(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
}
// Init SMC and set clocks
status = jtagmkII_smc_init32(pgm);
if(status != 0) {lineno = __LINE__; goto eRR;} // PLL 0
if(!(p->flags & AVRPART_INIT_SMC)) {
status = jtagmkII_smc_init32(pgm);
if(status != 0) {lineno = __LINE__; goto eRR;} // PLL 0
p->flags |= AVRPART_INIT_SMC;
}
// First unlock the pages
for(pageNum=0; pageNum < pages; ++pageNum) {
@ -3469,6 +3442,9 @@ static int jtagmkII_paged_write32(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
addr = 0;
for(pageNum=0; pageNum < pages; ++pageNum) {
report_progress(addr, n_bytes, NULL);
#if 0
val = jtagmkII_read_SABaddr(pgm, AVR32_FLASHC_FSR, 0x05);
if(val == ERROR_SAB) {lineno = __LINE__; goto eRR;}
@ -3512,10 +3488,7 @@ static int jtagmkII_paged_write32(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
}
status = jtagmkII_flash_write_page32(pgm, pageNum);
if(status < 0) {lineno = __LINE__; goto eRR;}
report_progress(addr, n_bytes, NULL);
}
free(cmd);
serial_recv_timeout = otimeout;

View File

@ -150,6 +150,7 @@ has_debugwire { yylval=NULL; return K_HAS_DW; }
has_pdi { yylval=NULL; return K_HAS_PDI; }
id { yylval=NULL; return K_ID; }
idr { yylval=NULL; return K_IDR; }
is_avr32 { yylval=NULL; return K_IS_AVR32; }
jtagmki { yylval=NULL; return K_JTAG_MKI; }
jtagmkii { yylval=NULL; return K_JTAG_MKII; }
jtagmkii_avr32 { yylval=NULL; return K_JTAG_MKII_AVR32; }

1
main.c
View File

@ -723,7 +723,6 @@ int main(int argc, char * argv [])
}
if(p->flags & AVRPART_AVR32) {
if(erase) p->flags |= AVRPART_CHIP_ERASE;
safemode = 0;
auto_erase = 0;
}