Submitted by Claus-Justus Heine:

bug #38713: Compilation of the documentation breaks with texinfo-5
* doc/avrdude.texi: Turn @itemx into @item, add @headitem to STK600
Routing/Socket card table



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1194 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
joerg_wunsch 2013-09-02 17:56:01 +00:00
parent dd9d49e890
commit a678239bb0
3 changed files with 29 additions and 21 deletions

View File

@ -1,3 +1,10 @@
2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Claus-Justus Heine:
bug #38713: Compilation of the documentation breaks with texinfo-5
* doc/avrdude.texi: Turn @itemx into @item, add @headitem to STK600
Routing/Socket card table
2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* usbasp.c: Add trace output for -vvv to non-TPI functions, too.

1
NEWS
View File

@ -81,6 +81,7 @@ Current:
- patch #7876 JTAGICE mkII fails to connect to attiny if debugwire
is enabled AND target has a very slow clock
- bug #39893: Verification failure with AVRISPmkII and Xmega
- bug #38713: Compilation of the documentation breaks with texinfo-5
* Keep track of input file contents

View File

@ -422,7 +422,7 @@ as it has been found at startup. This option modifies the state of the
the exitspec arguments provided, as follows:
@table @code
@itemx reset
@item reset
The `/RESET' signal will be left activated at program exit, that is it
will be held low, in order to keep the MCU in reset state afterwards.
Note in particular that the programming algorithm for the AT90S1200
@ -431,24 +431,24 @@ the MCU, so in case an external power supply is used for this MCU type,
a previous invocation of AVRDUDE with this option specified is one of
the possible ways to guarantee this condition.
@itemx noreset
@item noreset
The `/RESET' line will be deactivated at program exit, thus allowing the
MCU target program to run while the programming hardware remains
connected.
@itemx vcc
@item vcc
This option will leave those parallel port pins active (i. e. high) that
can be used to supply `Vcc' power to the MCU.
@itemx novcc
@item novcc
This option will pull the `Vcc' pins of the parallel port down at
program exit.
@itemx d_high
@item d_high
This option will leave the 8 data pins on the parallel port active
(i. e. high).
@itemx d_low
@item d_low
This option will leave the 8 data pins on the parallel port inactive
(i. e. low).
@ -537,7 +537,7 @@ but not on Windows. For more information about AVR-Doper see
For the USBtinyISP, which is a simplicistic device not implementing
serial numbers, multiple devices can be distinguished by their
location in the USB hierarchy.
@xref{Troubleshooting} for examples.
@xref{Troubleshooting}, for examples.
For programmers that attach to a serial port using some kind of
higher level protocol (as opposed to bit-bang style programmers),
@ -623,13 +623,13 @@ The user signature area of ATxmega devices.
The @var{op} field specifies what operation to perform:
@table @code
@itemx r
@item r
read the specified device memory and write to the specified file
@itemx w
@item w
read the specified file and write it to the specified device memory
@itemx v
@item v
read the specified device memory and the specified file and perform a verify operation
@end table
@ -639,20 +639,20 @@ write. The @var{format} field is optional and contains the format of
the file to read or write. Possible values are:
@table @code
@itemx i
@item i
Intel Hex
@itemx s
@item s
Motorola S-record
@itemx r
@item r
raw binary; little-endian byte order, in the case of the flash ROM data
@itemx e
@item e
ELF (Executable and Linkable Format), the final output file from the
linker; currently only accepted as an input file
@itemx m
@item m
immediate mode; actual byte values specified on the command line,
separated by commas or spaces in place of the @var{filename} field of
the @option{-U} option. This is useful
@ -662,25 +662,25 @@ it is treated as a hex value. If the number otherwise begins with a
leading zero (@code{0}) it is treated as octal. Otherwise, the value is
treated as decimal.
@itemx a
@item a
auto detect; valid for input only, and only if the input is not provided
at stdin.
@itemx d
@item d
decimal; this and the following formats are only valid on output.
They generate one line of output for the respective memory section,
forming a comma-separated list of the values.
This can be particularly useful for subsequent processing, like for
fuse bit settings.
@itemx h
@item h
hexadecimal; each value will get the string @emph{0x} prepended.
@itemx o
@item o
octal; each value will get a @emph{0}
prepended unless it is less than 8 in which case it gets no prefix.
@itemx b
@item b
binary; each value will get the string @emph{0b} prepended.
@end table
@ -1668,7 +1668,7 @@ The following devices are supported by the respective STK600 routing
and socket card:
@multitable @columnfractions .25 .25 .5
Routing card @tab Socket card @tab Devices
@headitem Routing card @tab Socket card @tab Devices
@item @code{} @tab @code{STK600-ATTINY10} @tab ATtiny4 ATtiny5 ATtiny9 ATtiny10
@item @code{STK600-RC008T-2} @tab @code{STK600-DIP} @tab ATtiny11 ATtiny12 ATtiny13 ATtiny13A ATtiny25 ATtiny45 ATtiny85
@item @code{STK600-RC008T-7} @tab @code{STK600-DIP} @tab ATtiny15