Colin O'Flynn - March 23, 2006 - <coflynn@newae.com>

Contributed by Wim Lewis, fix a few typos (patch #4987)
    *avrdude.1: Typo fix


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@574 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
c_oflynn 2006-03-24 02:49:09 +00:00
parent c3f6c7e21c
commit 90f6772cb0
2 changed files with 9 additions and 5 deletions

View File

@ -1,3 +1,7 @@
2006-03-23 Colin O'Flunn <coflynn@newae.com>
Contributed by Wim Lewis, fix a few typos (patch #4987)
*avrdude.1: Typo fix
2006-02-27 Colin O'Flynn <coflynn@newae.com> 2006-02-27 Colin O'Flynn <coflynn@newae.com>
Contributed by Wim Lewis, add support for checking device Contributed by Wim Lewis, add support for checking device
signatures in detail (patch #4924 and #4925) signatures in detail (patch #4924 and #4925)

View File

@ -80,7 +80,7 @@ and
need to be connected to the parallel port. Optionally, some otherwise need to be connected to the parallel port. Optionally, some otherwise
unused output pins of the parallel port can be used to supply power unused output pins of the parallel port can be used to supply power
for the MCU part, so it is also possible to construct a passive for the MCU part, so it is also possible to construct a passive
standalone programming device. Some status LEDs indicating the stand-alone programming device. Some status LEDs indicating the
current operating state of the programmer can be connected, and a current operating state of the programmer can be connected, and a
signal is available to control a buffer/driver IC 74LS367 (or signal is available to control a buffer/driver IC 74LS367 (or
74HCT367). The latter can be useful to decouple the parallel port 74HCT367). The latter can be useful to decouple the parallel port
@ -123,7 +123,7 @@ can program the EEPROM and flash ROM memory cells of supported AVR
parts. Where supported by the serial instruction set, fuse bits and parts. Where supported by the serial instruction set, fuse bits and
lock bits can be programmed as well. These are implemented within lock bits can be programmed as well. These are implemented within
.Nm .Nm
as seperate memory types and can be programmed using data from a file as separate memory types and can be programmed using data from a file
(see the (see the
.Fl m .Fl m
option) or from terminal mode (see the option) or from terminal mode (see the
@ -390,7 +390,7 @@ option to disable safemode prompting.
Perform a memory operation as indicated. The Perform a memory operation as indicated. The
.Ar memtype .Ar memtype
field specifies the memory type to operate on. field specifies the memory type to operate on.
The available memory types are device-dependant, the actual The available memory types are device-dependent, the actual
configuration can be viewed with the configuration can be viewed with the
.Cm part .Cm part
command in terminal mode. command in terminal mode.
@ -450,7 +450,7 @@ Motorola S-record
.It Ar r .It Ar r
raw binary; little-endian byte order, in the case of the flash ROM data raw binary; little-endian byte order, in the case of the flash ROM data
.It Ar m .It Ar m
immediate; actual byte values specified on the command line, seperated immediate; actual byte values specified on the command line, separated
by commas or spaces. This is good for programming fuse bytes without by commas or spaces. This is good for programming fuse bytes without
having to create a single-byte file or enter terminal mode. having to create a single-byte file or enter terminal mode.
.It Ar a .It Ar a
@ -662,4 +662,4 @@ avr109 (aka. butterfly) programmer might report
.Dl "selected device is not supported by programmer" . .Dl "selected device is not supported by programmer" .
Use the -F option to force Use the -F option to force
.Nm .Nm
to contiue anyway. to continue anyway.