From 90f6772cb06a1ccc8d14966516c5fd18d491d538 Mon Sep 17 00:00:00 2001 From: c_oflynn Date: Fri, 24 Mar 2006 02:49:09 +0000 Subject: [PATCH] Colin O'Flynn - March 23, 2006 - Contributed by Wim Lewis, fix a few typos (patch #4987) *avrdude.1: Typo fix git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@574 81a1dc3b-b13d-400b-aceb-764788c761c2 --- ChangeLog | 4 ++++ avrdude.1 | 10 +++++----- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/ChangeLog b/ChangeLog index 0e821606..6a3324a1 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,7 @@ +2006-03-23 Colin O'Flunn + Contributed by Wim Lewis, fix a few typos (patch #4987) + *avrdude.1: Typo fix + 2006-02-27 Colin O'Flynn Contributed by Wim Lewis, add support for checking device signatures in detail (patch #4924 and #4925) diff --git a/avrdude.1 b/avrdude.1 index fb9759f0..e631c913 100644 --- a/avrdude.1 +++ b/avrdude.1 @@ -80,7 +80,7 @@ and need to be connected to the parallel port. Optionally, some otherwise unused output pins of the parallel port can be used to supply power for the MCU part, so it is also possible to construct a passive -standalone programming device. Some status LEDs indicating the +stand-alone programming device. Some status LEDs indicating the current operating state of the programmer can be connected, and a signal is available to control a buffer/driver IC 74LS367 (or 74HCT367). The latter can be useful to decouple the parallel port @@ -123,7 +123,7 @@ can program the EEPROM and flash ROM memory cells of supported AVR parts. Where supported by the serial instruction set, fuse bits and lock bits can be programmed as well. These are implemented within .Nm -as seperate memory types and can be programmed using data from a file +as separate memory types and can be programmed using data from a file (see the .Fl m option) or from terminal mode (see the @@ -390,7 +390,7 @@ option to disable safemode prompting. Perform a memory operation as indicated. The .Ar memtype field specifies the memory type to operate on. -The available memory types are device-dependant, the actual +The available memory types are device-dependent, the actual configuration can be viewed with the .Cm part command in terminal mode. @@ -450,7 +450,7 @@ Motorola S-record .It Ar r raw binary; little-endian byte order, in the case of the flash ROM data .It Ar m -immediate; actual byte values specified on the command line, seperated +immediate; actual byte values specified on the command line, separated by commas or spaces. This is good for programming fuse bytes without having to create a single-byte file or enter terminal mode. .It Ar a @@ -662,4 +662,4 @@ avr109 (aka. butterfly) programmer might report .Dl "selected device is not supported by programmer" . Use the -F option to force .Nm -to contiue anyway. +to continue anyway.