Prefix pin config entries in the config file with a "c:". Later, I

might make part descriptions read in this way and we can use a
different letter for those (p).  This will make the parsing easier to
distinguish between the entry types.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@69 81a1dc3b-b13d-400b-aceb-764788c761c2

avrdude.1

@@ -125,8 +125,11 @@ Atmel AVR serial program method.
 .It Fl C Ar Config-File
 Use the specified config file to locate the desired pin configuration.
 Pin configurations are specified in the config file using a colon
-seperated field format.  The configuration name is the first field,
-the remaining fields are of the form:
+seperated field format.  The configuration entry type is the first
+field and currently must be
+.Ar c:
+The configuration name is the second field, and the remaining fields
+are of the form:
 .Ar PIN=VALUE ,
 where
 .Ar PIN
@@ -135,8 +138,11 @@ can be
 The value is the pin number of the PC parallel port assigned to that
 function.  The
 .Ar VCC
-pin can take multible values seperated by a comma.  It's value(s) must
-come from pins 2 through 9.  The default configuration file is
+pin can take on multiple values seperated by a comma (which are or'd
+together to create a bit mask).
+.Ar VCC
+pin numbers must come from pins 2 through 9.  The default
+configuration file is
 .Pa /usr/local/etc/avrprog.conf .
 .It Fl e
 Causes a chip erase to be executed.  This will reset the contents of the
@@ -304,7 +310,10 @@ Give a short on-line summary of the available commands.
 Leave terminal mode and thus
 .Nm avrprog .
 .El
-.Ss Parallel port pin connections
+.Ss Default Parallel port pin connections
+(these can be changed, see the
+.Fl c
+option)
 .TS
 ll.
 \fBPin number\fP	\fBFunction\fP
@@ -325,6 +334,8 @@ ll.
 .It Pa /dev/ppi0
 default device to be used for communication with the programming
 hardware
+.It Pa /usr/local/etc/avrprog.conf.sample
+sample pin configuration file
 .It Pa /usr/local/etc/avrprog.conf
 default pin configuration file
 .It Pa ~/.inputrc

avrdude.conf.sample

@@ -3,25 +3,25 @@
 # Programmer Pin Configurations
 #
 # The format of these entries is as follows:
-#   name:[desc=<description>:][[<pin>=<value>:]...]
+#   c:<name>:[desc=<description>:][[<pin>=<value>:]...]
 #
 # Example: for a programmer called PGM-1 that uses pin 2 and 3 for
 #   power, pins 4, 5, and 6 for RESET, SCK, and MOSI, and pin 10 for
 #   MISO, we could use the following entry:
 #
-#  pgm-1 : desc=Programmer 1:vcc=2,3:reset=4:sck=5:mosi=6:miso=10
+#  c:pgm-1 : desc=Programmer 1:vcc=2,3:reset=4:sck=5:mosi=6:miso=10
 #
 # Continuation lines are supported, use a backslash (\) as the last
 # character of the line and the next line will included as part of the
 # configuration data.
 #
 
-bsd   : desc=Brian Dean's programmer:vcc=2,3,4,5:reset=7:sck=8:\
+c:bsd   : desc=Brian Dean's programmer:vcc=2,3,4,5:reset=7:sck=8:\
           mosi=9:miso=10
 
-dt006 : desc=Dontronics DT006:reset=4:sck=5:mosi=2:miso=11
+c:dt006 : desc=Dontronics DT006:reset=4:sck=5:mosi=2:miso=11
 
-alf   : desc=Tony Freibel's programmer:vcc=2,3,4,5:buff=6:\
+c:alf   : desc=Tony Freibel's programmer:vcc=2,3,4,5:buff=6:\
           reset=7:sck=8:mosi=9:miso=10:errled=1:rdyled=14:pgmled=16:\
           vfyled=17
 

main.c

@@ -264,7 +264,6 @@ int print_module_versions ( FILE * outf, char * timestamp )
 }
 
 
-
 #define MAX_LINE_LEN 1024
 #define MAX_PIN_NAME 64
 
@@ -457,6 +456,7 @@ int read_config(char * infile, char * config, unsigned int * pinno,
 
   lineno = 0;
   buf[0] = 0;
+  cont   = 0;
   while (fgets(line, MAX_LINE_LEN, f) != NULL) {
     lineno++;
 
@@ -464,6 +464,9 @@ int read_config(char * infile, char * config, unsigned int * pinno,
     while (isspace(*p))
       p++;
 
+    /*
+     * skip empty lines and lines that start with '#'
+     */
     if ((*p == '#')||(*p == '\n')||(*p == 0))
       continue;
 
@@ -473,6 +476,37 @@ int read_config(char * infile, char * config, unsigned int * pinno,
       len--;
     }
 
+    /*
+     * we're only interested in pin configuration data which begin
+     * with "c:" 
+     */
+    if (((len < 3) || (p[0] != 'c')) && !cont)
+      continue;
+
+
+    /*
+     * skip over the "c:"
+     */
+    if (!cont) {
+      p++;
+      while (*p && isspace(*p))
+        p++;
+
+      if (*p != ':') {
+        fprintf(stderr, "line %d:\n%s\n",
+                lineno, line);
+        for (i=0; i<(p-line); i++) {
+          fprintf(stderr, "-");
+        }
+        fprintf(stderr, "^\n");
+        fprintf(stderr, "error at column %d, line %d of %s: expecting ':'\n",
+                p-line+1, lineno, infile);
+        return -1;
+      }
+      p++;
+      len = strlen(p);
+    }
+
     cont = 0;
 
     if (p[len-1] == '\\') {
@@ -547,12 +581,47 @@ int read_config(char * infile, char * config, unsigned int * pinno,
 
 
 
+static char vccpins_buf[64];
+char * vccpins_str(unsigned int pmask)
+{
+  unsigned int mask;
+  int pin;
+  char b2[8];
+  char * b;
+
+  b = vccpins_buf;
+
+  b[0] = 0;
+  for (pin = 2, mask = 1; mask < 0x80; mask = mask << 1, pin++) {
+    if (pmask & mask) {
+      sprintf(b2, "%d", pin);
+      if (b[0] != 0)
+        strcat(b, ",");
+      strcat(b, b2);
+    }
+  }
+
+  return b;
+}
+
+
 void pinconfig_display(char * p, char * config, char * desc)
 {
+  char vccpins[64];
+
+  if (pinno[PPI_AVR_VCC]) {
+    snprintf(vccpins, sizeof(vccpins), " = pins %s", 
+             vccpins_str(pinno[PPI_AVR_VCC]));
+  }
+  else {
+    vccpins[0] = 0;
+  }
+
   fprintf(stderr, "%sProgrammer Pin Configuration: %s (%s)\n", p, 
           config ? config : "DEFAULT", desc);
+
   fprintf(stderr, 
-          "%s  VCC     = 0x%02x\n"
+          "%s  VCC     = 0x%02x %s\n"
           "%s  BUFF    = %d\n"
           "%s  RESET   = %d\n"
           "%s  SCK     = %d\n"
@@ -562,7 +631,7 @@ void pinconfig_display(char * p, char * config, char * desc)
           "%s  RDY LED = %d\n"
           "%s  PGM LED = %d\n"
           "%s  VFY LED = %d\n",
-          p, pinno[PPI_AVR_VCC],
+          p, pinno[PPI_AVR_VCC], vccpins,
           p, pinno[PIN_AVR_BUFF],
           p, pinno[PIN_AVR_RESET],
           p, pinno[PIN_AVR_SCK],