From 3cdf00c76c260d56b483c51bba02e6c79c2c6640 Mon Sep 17 00:00:00 2001 From: "Brian S. Dean" Date: Thu, 20 Sep 2001 03:19:31 +0000 Subject: [PATCH] Prefix pin config entries in the config file with a "c:". Later, I might make part descriptions read in this way and we can use a different letter for those (p). This will make the parsing easier to distinguish between the entry types. git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@69 81a1dc3b-b13d-400b-aceb-764788c761c2 --- avrdude.1 | 21 ++++++++++--- avrdude.conf.sample | 16 +++++----- main.c | 75 +++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 96 insertions(+), 16 deletions(-) diff --git a/avrdude.1 b/avrdude.1 index 0dc3934d..26744600 100644 --- a/avrdude.1 +++ b/avrdude.1 @@ -125,8 +125,11 @@ Atmel AVR serial program method. .It Fl C Ar Config-File Use the specified config file to locate the desired pin configuration. Pin configurations are specified in the config file using a colon -seperated field format. The configuration name is the first field, -the remaining fields are of the form: +seperated field format. The configuration entry type is the first +field and currently must be +.Ar c: +The configuration name is the second field, and the remaining fields +are of the form: .Ar PIN=VALUE , where .Ar PIN @@ -135,8 +138,11 @@ can be The value is the pin number of the PC parallel port assigned to that function. The .Ar VCC -pin can take multible values seperated by a comma. It's value(s) must -come from pins 2 through 9. The default configuration file is +pin can take on multiple values seperated by a comma (which are or'd +together to create a bit mask). +.Ar VCC +pin numbers must come from pins 2 through 9. The default +configuration file is .Pa /usr/local/etc/avrprog.conf . .It Fl e Causes a chip erase to be executed. This will reset the contents of the @@ -304,7 +310,10 @@ Give a short on-line summary of the available commands. Leave terminal mode and thus .Nm avrprog . .El -.Ss Parallel port pin connections +.Ss Default Parallel port pin connections +(these can be changed, see the +.Fl c +option) .TS ll. \fBPin number\fP \fBFunction\fP @@ -325,6 +334,8 @@ ll. .It Pa /dev/ppi0 default device to be used for communication with the programming hardware +.It Pa /usr/local/etc/avrprog.conf.sample +sample pin configuration file .It Pa /usr/local/etc/avrprog.conf default pin configuration file .It Pa ~/.inputrc diff --git a/avrdude.conf.sample b/avrdude.conf.sample index 6dd081ca..afa63de1 100644 --- a/avrdude.conf.sample +++ b/avrdude.conf.sample @@ -3,25 +3,25 @@ # Programmer Pin Configurations # # The format of these entries is as follows: -# name:[desc=:][[=:]...] +# c::[desc=:][[=:]...] # # Example: for a programmer called PGM-1 that uses pin 2 and 3 for # power, pins 4, 5, and 6 for RESET, SCK, and MOSI, and pin 10 for # MISO, we could use the following entry: # -# pgm-1 : desc=Programmer 1:vcc=2,3:reset=4:sck=5:mosi=6:miso=10 +# c:pgm-1 : desc=Programmer 1:vcc=2,3:reset=4:sck=5:mosi=6:miso=10 # # Continuation lines are supported, use a backslash (\) as the last # character of the line and the next line will included as part of the # configuration data. # -bsd : desc=Brian Dean's programmer:vcc=2,3,4,5:reset=7:sck=8:\ - mosi=9:miso=10 +c:bsd : desc=Brian Dean's programmer:vcc=2,3,4,5:reset=7:sck=8:\ + mosi=9:miso=10 -dt006 : desc=Dontronics DT006:reset=4:sck=5:mosi=2:miso=11 +c:dt006 : desc=Dontronics DT006:reset=4:sck=5:mosi=2:miso=11 -alf : desc=Tony Freibel's programmer:vcc=2,3,4,5:buff=6:\ - reset=7:sck=8:mosi=9:miso=10:errled=1:rdyled=14:pgmled=16:\ - vfyled=17 +c:alf : desc=Tony Freibel's programmer:vcc=2,3,4,5:buff=6:\ + reset=7:sck=8:mosi=9:miso=10:errled=1:rdyled=14:pgmled=16:\ + vfyled=17 diff --git a/main.c b/main.c index 794a5a1c..2c9ad0a2 100644 --- a/main.c +++ b/main.c @@ -264,7 +264,6 @@ int print_module_versions ( FILE * outf, char * timestamp ) } - #define MAX_LINE_LEN 1024 #define MAX_PIN_NAME 64 @@ -457,6 +456,7 @@ int read_config(char * infile, char * config, unsigned int * pinno, lineno = 0; buf[0] = 0; + cont = 0; while (fgets(line, MAX_LINE_LEN, f) != NULL) { lineno++; @@ -464,6 +464,9 @@ int read_config(char * infile, char * config, unsigned int * pinno, while (isspace(*p)) p++; + /* + * skip empty lines and lines that start with '#' + */ if ((*p == '#')||(*p == '\n')||(*p == 0)) continue; @@ -473,6 +476,37 @@ int read_config(char * infile, char * config, unsigned int * pinno, len--; } + /* + * we're only interested in pin configuration data which begin + * with "c:" + */ + if (((len < 3) || (p[0] != 'c')) && !cont) + continue; + + + /* + * skip over the "c:" + */ + if (!cont) { + p++; + while (*p && isspace(*p)) + p++; + + if (*p != ':') { + fprintf(stderr, "line %d:\n%s\n", + lineno, line); + for (i=0; i<(p-line); i++) { + fprintf(stderr, "-"); + } + fprintf(stderr, "^\n"); + fprintf(stderr, "error at column %d, line %d of %s: expecting ':'\n", + p-line+1, lineno, infile); + return -1; + } + p++; + len = strlen(p); + } + cont = 0; if (p[len-1] == '\\') { @@ -547,12 +581,47 @@ int read_config(char * infile, char * config, unsigned int * pinno, +static char vccpins_buf[64]; +char * vccpins_str(unsigned int pmask) +{ + unsigned int mask; + int pin; + char b2[8]; + char * b; + + b = vccpins_buf; + + b[0] = 0; + for (pin = 2, mask = 1; mask < 0x80; mask = mask << 1, pin++) { + if (pmask & mask) { + sprintf(b2, "%d", pin); + if (b[0] != 0) + strcat(b, ","); + strcat(b, b2); + } + } + + return b; +} + + void pinconfig_display(char * p, char * config, char * desc) { + char vccpins[64]; + + if (pinno[PPI_AVR_VCC]) { + snprintf(vccpins, sizeof(vccpins), " = pins %s", + vccpins_str(pinno[PPI_AVR_VCC])); + } + else { + vccpins[0] = 0; + } + fprintf(stderr, "%sProgrammer Pin Configuration: %s (%s)\n", p, config ? config : "DEFAULT", desc); + fprintf(stderr, - "%s VCC = 0x%02x\n" + "%s VCC = 0x%02x %s\n" "%s BUFF = %d\n" "%s RESET = %d\n" "%s SCK = %d\n" @@ -562,7 +631,7 @@ void pinconfig_display(char * p, char * config, char * desc) "%s RDY LED = %d\n" "%s PGM LED = %d\n" "%s VFY LED = %d\n", - p, pinno[PPI_AVR_VCC], + p, pinno[PPI_AVR_VCC], vccpins, p, pinno[PIN_AVR_BUFF], p, pinno[PIN_AVR_RESET], p, pinno[PIN_AVR_SCK],