Submitted by Nic Jones:

bug #32539: [Documentation][Patch] Man page is misleading re: Dragon & PDI

Update information about PDI connections on AVR Dragon



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@966 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Joerg Wunsch 2011-08-15 16:05:54 +00:00
parent 40cddf0085
commit 2056b0b568
2 changed files with 27 additions and 3 deletions

View File

@ -1,3 +1,11 @@
2011-08-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Nic Jones:
bug #32539: [Documentation][Patch] Man page is misleading
re: Dragon & PDI
* doc/avrdude.texi: Update information about PDI connections
on AVR Dragon
2011-08-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* usbasp.c: Add <stdint.h> so this actually compiles

View File

@ -193,11 +193,11 @@ See below for the limitations of debugWire.
For ATxmega devices, the JTAG ICE mkII is supported in PDI mode, provided it
has a revision 1 hardware and firmware version of at least 5.37 (decimal).
The AVR Dragon is supported in all modes (ISP, JTAG, HVSP, PP, debugWire).
The AVR Dragon is supported in all modes (ISP, JTAG, PDI, HVSP, PP, debugWire).
When used in JTAG and debugWire mode, the AVR Dragon behaves similar to a
JTAG ICE mkII, so all device-specific comments for that device
will apply as well.
When used in ISP mode, the AVR Dragon behaves similar to an
When used in ISP and PDI mode, the AVR Dragon behaves similar to an
AVRISP mkII (or JTAG ICE mkII in ISP mode), so all device-specific
comments will apply there.
In particular, the Dragon starts out with a rather fast ISP clock
@ -2358,7 +2358,7 @@ or AVR Dragon in ISP mode, when they detect that ISP mode cannot be
entered.
@item
Problem: I want to use my JTAG ICE mkII or AVR Dragon to program an
Problem: I want to use my JTAG ICE mkII to program an
Xmega device through PDI. The documentation tells me to use the
@emph{XMEGA PDI adapter for JTAGICE mkII} that is supposed to ship
with the kit, yet I don't have it.
@ -2380,6 +2380,22 @@ Solution: Use the following pin mapping:
@item 10 (GND) @tab @tab Brown @tab
@end multitable
@item
Problem: I want to use my AVR Dragon to program an
Xmega device through PDI.
Solution: Use the 6 pin ISP header on the Dragon and the following pin mapping:
@multitable @columnfractions .2 .2
@item @strong{Dragon} @tab @strong{Target}
@item @strong{ISP Header} @tab @strong{pins}
@item 1 (MISO) @tab PDI_DATA
@item 2 (VCC) @tab VCC
@item 3 (SCK) @tab
@item 4 (MOSI) @tab
@item 5 (RESET) @tab PDI_CLK / RST
@item 6 (GND) @tab GND
@end multitable
@item
Problem: I want to use my AVRISP mkII to program an