avrdude/avrpart.h

227 lines
9.7 KiB
C
Raw Normal View History

/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2003-2004 Brian S. Dean <bsd@bsdhome.com>
* Copyright (C) 2006 Joerg Wunsch <j@uriah.heep.sax.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* $Id$ */
#ifndef avrpart_h
#define avrpart_h
#include <limits.h>
#include "lists.h"
/*
* AVR serial programming instructions
*/
enum {
AVR_OP_READ,
AVR_OP_WRITE,
AVR_OP_READ_LO,
AVR_OP_READ_HI,
AVR_OP_WRITE_LO,
AVR_OP_WRITE_HI,
AVR_OP_LOADPAGE_LO,
AVR_OP_LOADPAGE_HI,
AVR_OP_LOAD_EXT_ADDR,
AVR_OP_WRITEPAGE,
AVR_OP_CHIP_ERASE,
AVR_OP_PGM_ENABLE,
AVR_OP_MAX
};
enum {
AVR_CMDBIT_IGNORE, /* bit is ignored on input and output */
AVR_CMDBIT_VALUE, /* bit is set to 0 or 1 for input or output */
AVR_CMDBIT_ADDRESS, /* this bit represents an input address bit */
AVR_CMDBIT_INPUT, /* this bit is an input bit */
AVR_CMDBIT_OUTPUT /* this bit is an output bit */
};
enum { /* these are assigned to reset_disposition of AVRPART */
RESET_DEDICATED, /* reset pin is dedicated */
RESET_IO /* reset pin might be configured as an I/O pin */
};
enum ctl_stack_t {
CTL_STACK_NONE, /* no control stack defined */
CTL_STACK_PP, /* parallel programming control stack */
CTL_STACK_HVSP /* high voltage serial programming control stack */
};
/*
* serial programming instruction bit specifications
*/
typedef struct cmdbit {
int type; /* AVR_CMDBIT_* */
int bitno; /* which input bit to use for this command bit */
int value; /* bit value if type == AVR_CMDBIT_VALUD */
} CMDBIT;
typedef struct opcode {
CMDBIT bit[32]; /* opcode bit specs */
} OPCODE;
#define AVRPART_SERIALOK 0x0001 /* part supports serial programming */
#define AVRPART_PARALLELOK 0x0002 /* part supports parallel programming */
#define AVRPART_PSEUDOPARALLEL 0x0004 /* part has pseudo parallel support */
Mega-commit to bring in both, the STK500v2 support from Erik Walthinsen, as well as JTAG ICE mkII support (by me). Erik's submission has been cleaned up a little bit, mostly to add his name and the current year to the copyright of the new file, remove trailing white space before importing the files, and fix the minor syntax errors in his avrdude.conf.in additions (missing semicolons). The JTAG ICE mkII support should be considered alpha to beta quality at this point. Few things are still to be done, like defering the hfuse (OCDEN) tweaks until they are really required. Also, for reasons not yet known, the target MCU doesn't start to run after signing off from the ICE, it needs a power-cycle first (at least on my STK500). Note that for the JTAG ICE, I did change a few things in the internal API. Notably I made the serial receive timeout configurable by the backends via an exported variable (done in both the Posix and the Win32 implementation), and I made the serial_recv() function return a -1 instead of bailing out with exit(1) upon encountering a receive timeout (currently only done in the Posix implementation). Both measures together allow me to receive a datastreem from the ICE at 115 kbps on a somewhat lossy PCI multi-UART card that occasionally drops a character. The JTAG ICE mkII protocol has enough of safety layers to allow recovering from these events, but the previous code wasn't prepared for any kind of recovery. The Win32 change for this still has to be done, and the traditional drivers need to be converted to exit(1) upon encountering a timeout (as they're now getting a -1 returned they didn't see before in that case). git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
#define AVRPART_HAS_JTAG 0x0008 /* part has a JTAG i/f */
#define AVRPART_ALLOWFULLPAGEBITSTREAM 0x0010 /* JTAG ICE mkII param. */
#define AVRPART_ENABLEPAGEPROGRAMMING 0x0020 /* JTAG ICE mkII param. */
#define AVRPART_HAS_DW 0x0040 /* part has a debugWire i/f */
#define AVRPART_HAS_PDI 0x0080 /* part has PDI i/f rather than ISP (ATxmega) */
#define AVRPART_AVR32 0x0100 /* part is in AVR32 family */
#define AVRPART_INIT_SMC 0x0200 /* part will undergo chip erase */
#define AVRPART_WRITE 0x0400 /* at least one write operation specified */
#define AVRPART_HAS_TPI 0x0800 /* part has TPI i/f rather than ISP (ATtiny4/5/9/10) */
#define AVRPART_IS_AT90S1200 0x1000 /* part is an AT90S1200 (needs special treatment) */
#define AVR_DESCLEN 64
#define AVR_IDLEN 32
#define CTL_STACK_SIZE 32
#define FLASH_INSTR_SIZE 3
#define EEPROM_INSTR_SIZE 20
typedef struct avrpart {
char desc[AVR_DESCLEN]; /* long part name */
char id[AVR_IDLEN]; /* short part name */
int stk500_devcode; /* stk500 device code */
int avr910_devcode; /* avr910 device code */
int chip_erase_delay; /* microseconds */
unsigned char pagel; /* for parallel programming */
unsigned char bs2; /* for parallel programming */
unsigned char signature[3]; /* expected value of signature bytes */
int reset_disposition; /* see RESET_ enums */
int retry_pulse; /* retry program enable by pulsing
this pin (PIN_AVR_*) */
unsigned flags; /* see AVRPART_ masks */
Mega-commit to bring in both, the STK500v2 support from Erik Walthinsen, as well as JTAG ICE mkII support (by me). Erik's submission has been cleaned up a little bit, mostly to add his name and the current year to the copyright of the new file, remove trailing white space before importing the files, and fix the minor syntax errors in his avrdude.conf.in additions (missing semicolons). The JTAG ICE mkII support should be considered alpha to beta quality at this point. Few things are still to be done, like defering the hfuse (OCDEN) tweaks until they are really required. Also, for reasons not yet known, the target MCU doesn't start to run after signing off from the ICE, it needs a power-cycle first (at least on my STK500). Note that for the JTAG ICE, I did change a few things in the internal API. Notably I made the serial receive timeout configurable by the backends via an exported variable (done in both the Posix and the Win32 implementation), and I made the serial_recv() function return a -1 instead of bailing out with exit(1) upon encountering a receive timeout (currently only done in the Posix implementation). Both measures together allow me to receive a datastreem from the ICE at 115 kbps on a somewhat lossy PCI multi-UART card that occasionally drops a character. The JTAG ICE mkII protocol has enough of safety layers to allow recovering from these events, but the previous code wasn't prepared for any kind of recovery. The Win32 change for this still has to be done, and the traditional drivers need to be converted to exit(1) upon encountering a timeout (as they're now getting a -1 returned they didn't see before in that case). git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
int timeout; /* stk500 v2 xml file parameter */
int stabdelay; /* stk500 v2 xml file parameter */
int cmdexedelay; /* stk500 v2 xml file parameter */
int synchloops; /* stk500 v2 xml file parameter */
int bytedelay; /* stk500 v2 xml file parameter */
int pollindex; /* stk500 v2 xml file parameter */
unsigned char pollvalue; /* stk500 v2 xml file parameter */
int predelay; /* stk500 v2 xml file parameter */
int postdelay; /* stk500 v2 xml file parameter */
int pollmethod; /* stk500 v2 xml file parameter */
enum ctl_stack_t ctl_stack_type; /* what to use the ctl stack for */
unsigned char controlstack[CTL_STACK_SIZE]; /* stk500v2 PP/HVSP ctl stack */
unsigned char flash_instr[FLASH_INSTR_SIZE]; /* flash instructions (debugWire, JTAG) */
unsigned char eeprom_instr[EEPROM_INSTR_SIZE]; /* EEPROM instructions (debugWire, JTAG) */
int hventerstabdelay; /* stk500 v2 hv mode parameter */
int progmodedelay; /* stk500 v2 hv mode parameter */
int latchcycles; /* stk500 v2 hv mode parameter */
int togglevtg; /* stk500 v2 hv mode parameter */
int poweroffdelay; /* stk500 v2 hv mode parameter */
int resetdelayms; /* stk500 v2 hv mode parameter */
int resetdelayus; /* stk500 v2 hv mode parameter */
int hvleavestabdelay; /* stk500 v2 hv mode parameter */
int resetdelay; /* stk500 v2 hv mode parameter */
int chiperasepulsewidth; /* stk500 v2 hv mode parameter */
int chiperasepolltimeout; /* stk500 v2 hv mode parameter */
int chiperasetime; /* stk500 v2 hv mode parameter */
int programfusepulsewidth; /* stk500 v2 hv mode parameter */
int programfusepolltimeout; /* stk500 v2 hv mode parameter */
int programlockpulsewidth; /* stk500 v2 hv mode parameter */
int programlockpolltimeout; /* stk500 v2 hv mode parameter */
int synchcycles; /* stk500 v2 hv mode parameter */
int hvspcmdexedelay; /* stk500 v2 xml file parameter */
Mega-commit to bring in both, the STK500v2 support from Erik Walthinsen, as well as JTAG ICE mkII support (by me). Erik's submission has been cleaned up a little bit, mostly to add his name and the current year to the copyright of the new file, remove trailing white space before importing the files, and fix the minor syntax errors in his avrdude.conf.in additions (missing semicolons). The JTAG ICE mkII support should be considered alpha to beta quality at this point. Few things are still to be done, like defering the hfuse (OCDEN) tweaks until they are really required. Also, for reasons not yet known, the target MCU doesn't start to run after signing off from the ICE, it needs a power-cycle first (at least on my STK500). Note that for the JTAG ICE, I did change a few things in the internal API. Notably I made the serial receive timeout configurable by the backends via an exported variable (done in both the Posix and the Win32 implementation), and I made the serial_recv() function return a -1 instead of bailing out with exit(1) upon encountering a receive timeout (currently only done in the Posix implementation). Both measures together allow me to receive a datastreem from the ICE at 115 kbps on a somewhat lossy PCI multi-UART card that occasionally drops a character. The JTAG ICE mkII protocol has enough of safety layers to allow recovering from these events, but the previous code wasn't prepared for any kind of recovery. The Win32 change for this still has to be done, and the traditional drivers need to be converted to exit(1) upon encountering a timeout (as they're now getting a -1 returned they didn't see before in that case). git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
unsigned char idr; /* JTAG ICE mkII XML file parameter */
unsigned char rampz; /* JTAG ICE mkII XML file parameter */
unsigned char spmcr; /* JTAG ICE mkII XML file parameter */
unsigned short eecr; /* JTAC ICE mkII XML file parameter */
unsigned int nvm_base; /* Base address of NVM controller in ATxmega devices */
Mega-commit to bring in both, the STK500v2 support from Erik Walthinsen, as well as JTAG ICE mkII support (by me). Erik's submission has been cleaned up a little bit, mostly to add his name and the current year to the copyright of the new file, remove trailing white space before importing the files, and fix the minor syntax errors in his avrdude.conf.in additions (missing semicolons). The JTAG ICE mkII support should be considered alpha to beta quality at this point. Few things are still to be done, like defering the hfuse (OCDEN) tweaks until they are really required. Also, for reasons not yet known, the target MCU doesn't start to run after signing off from the ICE, it needs a power-cycle first (at least on my STK500). Note that for the JTAG ICE, I did change a few things in the internal API. Notably I made the serial receive timeout configurable by the backends via an exported variable (done in both the Posix and the Win32 implementation), and I made the serial_recv() function return a -1 instead of bailing out with exit(1) upon encountering a receive timeout (currently only done in the Posix implementation). Both measures together allow me to receive a datastreem from the ICE at 115 kbps on a somewhat lossy PCI multi-UART card that occasionally drops a character. The JTAG ICE mkII protocol has enough of safety layers to allow recovering from these events, but the previous code wasn't prepared for any kind of recovery. The Win32 change for this still has to be done, and the traditional drivers need to be converted to exit(1) upon encountering a timeout (as they're now getting a -1 returned they didn't see before in that case). git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
OPCODE * op[AVR_OP_MAX]; /* opcodes */
LISTID mem; /* avr memory definitions */
char config_file[PATH_MAX]; /* config file where defined */
int lineno; /* config file line number */
} AVRPART;
#define AVR_MEMDESCLEN 64
typedef struct avrmem {
char desc[AVR_MEMDESCLEN]; /* memory description ("flash", "eeprom", etc) */
int paged; /* page addressed (e.g. ATmega flash) */
int size; /* total memory size in bytes */
int page_size; /* size of memory page (if page addressed) */
int num_pages; /* number of pages (if page addressed) */
unsigned int offset; /* offset in IO memory (ATxmega) */
int min_write_delay; /* microseconds */
int max_write_delay; /* microseconds */
int pwroff_after_write; /* after this memory type is written to,
the device must be powered off and
back on, see errata
http://www.atmel.com/atmel/acrobat/doc1280.pdf */
unsigned char readback[2]; /* polled read-back values */
Mega-commit to bring in both, the STK500v2 support from Erik Walthinsen, as well as JTAG ICE mkII support (by me). Erik's submission has been cleaned up a little bit, mostly to add his name and the current year to the copyright of the new file, remove trailing white space before importing the files, and fix the minor syntax errors in his avrdude.conf.in additions (missing semicolons). The JTAG ICE mkII support should be considered alpha to beta quality at this point. Few things are still to be done, like defering the hfuse (OCDEN) tweaks until they are really required. Also, for reasons not yet known, the target MCU doesn't start to run after signing off from the ICE, it needs a power-cycle first (at least on my STK500). Note that for the JTAG ICE, I did change a few things in the internal API. Notably I made the serial receive timeout configurable by the backends via an exported variable (done in both the Posix and the Win32 implementation), and I made the serial_recv() function return a -1 instead of bailing out with exit(1) upon encountering a receive timeout (currently only done in the Posix implementation). Both measures together allow me to receive a datastreem from the ICE at 115 kbps on a somewhat lossy PCI multi-UART card that occasionally drops a character. The JTAG ICE mkII protocol has enough of safety layers to allow recovering from these events, but the previous code wasn't prepared for any kind of recovery. The Win32 change for this still has to be done, and the traditional drivers need to be converted to exit(1) upon encountering a timeout (as they're now getting a -1 returned they didn't see before in that case). git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
int mode; /* stk500 v2 xml file parameter */
int delay; /* stk500 v2 xml file parameter */
int blocksize; /* stk500 v2 xml file parameter */
int readsize; /* stk500 v2 xml file parameter */
int pollindex; /* stk500 v2 xml file parameter */
unsigned char * buf; /* pointer to memory buffer */
OPCODE * op[AVR_OP_MAX]; /* opcodes */
} AVRMEM;
#ifdef __cplusplus
extern "C" {
#endif
/* Functions for OPCODE structures */
OPCODE * avr_new_opcode(void);
int avr_set_bits(OPCODE * op, unsigned char * cmd);
int avr_set_addr(OPCODE * op, unsigned char * cmd, unsigned long addr);
int avr_set_input(OPCODE * op, unsigned char * cmd, unsigned char data);
int avr_get_output(OPCODE * op, unsigned char * res, unsigned char * data);
/* Functions for AVRMEM structures */
AVRMEM * avr_new_memtype(void);
int avr_initmem(AVRPART * p);
AVRMEM * avr_dup_mem(AVRMEM * m);
AVRMEM * avr_locate_mem(AVRPART * p, char * desc);
void avr_mem_display(const char * prefix, FILE * f, AVRMEM * m, int type,
int verbose);
/* Functions for AVRPART structures */
AVRPART * avr_new_part(void);
AVRPART * avr_dup_part(AVRPART * d);
AVRPART * locate_part(LISTID parts, char * partdesc);
AVRPART * locate_part_by_avr910_devcode(LISTID parts, int devcode);
void avr_display(FILE * f, AVRPART * p, const char * prefix, int verbose);
typedef void (*walk_avrparts_cb)(const char *name, const char *desc,
const char *cfgname, int cfglineno,
void *cookie);
void walk_avrparts(LISTID programmers, walk_avrparts_cb cb, void *cookie);
#ifdef __cplusplus
}
#endif
#endif /* avrpart_h */