/****************************************************************************** * * Copyright(c) 2007 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ #define _HCI_HAL_INIT_C_ #include #include #include "hal_com_h2c.h" #ifndef CONFIG_USB_HCI #error "CONFIG_USB_HCI shall be on!\n" #endif static VOID _ConfigNormalChipOutEP_8188E( IN PADAPTER pAdapter, IN u8 NumOutPipe ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); switch (NumOutPipe) { case 3: pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_LQ | TX_SELE_NQ; pHalData->OutEpNumber = 3; break; case 2: pHalData->OutEpQueueSel = TX_SELE_HQ | TX_SELE_NQ; pHalData->OutEpNumber = 2; break; case 1: pHalData->OutEpQueueSel = TX_SELE_HQ; pHalData->OutEpNumber = 1; break; default: break; } RTW_INFO("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n", __FUNCTION__, pHalData->OutEpQueueSel, pHalData->OutEpNumber); } static BOOLEAN HalUsbSetQueuePipeMapping8188EUsb( IN PADAPTER pAdapter, IN u8 NumInPipe, IN u8 NumOutPipe ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); BOOLEAN result = _FALSE; _ConfigNormalChipOutEP_8188E(pAdapter, NumOutPipe); /* Normal chip with one IN and one OUT doesn't have interrupt IN EP. */ if (1 == pHalData->OutEpNumber) { if (1 != NumInPipe) return result; } /* All config other than above support one Bulk IN and one Interrupt IN. */ /* if(2 != NumInPipe){ */ /* return result; */ /* } */ result = Hal_MappingOutPipe(pAdapter, NumOutPipe); return result; } void rtl8188eu_interface_configure(_adapter *padapter) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); struct registry_priv *registry_par = &padapter->registrypriv; if (IS_HIGH_SPEED_USB(padapter)) { pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;/* 512 bytes */ } else { pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;/* 64 bytes */ } pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber; #ifdef CONFIG_USB_TX_AGGREGATION pHalData->UsbTxAggMode = 1; pHalData->UsbTxAggDescNum = 0x1; /* only 4 bits */ #endif #ifdef CONFIG_USB_RX_AGGREGATION pHalData->rxagg_mode = registry_par->usb_rxagg_mode; if ((pHalData->rxagg_mode != RX_AGG_DMA) && (pHalData->rxagg_mode != RX_AGG_USB)) pHalData->rxagg_mode = RX_AGG_DMA; if (pHalData->rxagg_mode == RX_AGG_DMA) { pHalData->rxagg_dma_size = 48; /* uint: 128b, 0x0A = 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize */ pHalData->rxagg_dma_timeout = 0x4; /* 6, absolute time = 34ms/(2^6) */ } else if (pHalData->rxagg_mode == RX_AGG_USB) { pHalData->rxagg_usb_size = 16; /* unit: 512b */ pHalData->rxagg_usb_timeout = 0x6; } #endif HalUsbSetQueuePipeMapping8188EUsb(padapter, pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes); } static u32 _InitPowerOn_8188EU(_adapter *padapter) { u16 value16; /* HW Power on sequence */ u8 bMacPwrCtrlOn = _FALSE; rtw_hal_get_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); if (bMacPwrCtrlOn == _TRUE) return _SUCCESS; if (!HalPwrSeqCmdParsing(padapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_PWR_ON_FLOW)) { RTW_ERR("%s: run power on flow fail\n", __func__); return _FAIL; } /* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ /* Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */ rtw_write16(padapter, REG_CR, 0x00); /* suggseted by zhouzhou, by page, 20111230 */ /* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ value16 = rtw_read16(padapter, REG_CR); value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN | PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN); /* for SDIO - Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */ rtw_write16(padapter, REG_CR, value16); bMacPwrCtrlOn = _TRUE; rtw_hal_set_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); return _SUCCESS; } static void _dbg_dump_macreg(_adapter *padapter) { u32 offset = 0; u32 val32 = 0; u32 index = 0 ; for (index = 0; index < 64; index++) { offset = index * 4; val32 = rtw_read32(padapter, offset); RTW_INFO("offset : 0x%02x ,val:0x%08x\n", offset, val32); } } static void _InitPABias(_adapter *padapter) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); u8 pa_setting; /* FIXED PA current issue */ /* efuse_one_byte_read(padapter, 0x1FA, &pa_setting); */ efuse_OneByteRead(padapter, 0x1FA, &pa_setting, _FALSE); if (!(pa_setting & BIT0)) { phy_set_rf_reg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x0F406); phy_set_rf_reg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x4F406); phy_set_rf_reg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x8F406); phy_set_rf_reg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0xCF406); } if (!(pa_setting & BIT4)) { pa_setting = rtw_read8(padapter, 0x16); pa_setting &= 0x0F; rtw_write8(padapter, 0x16, pa_setting | 0x80); rtw_write8(padapter, 0x16, pa_setting | 0x90); } } #ifdef CONFIG_BT_COEXIST static void _InitBTCoexist(_adapter *padapter) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); u8 u1Tmp; if (pbtpriv->BT_Coexist && pbtpriv->BT_CoexistType == BT_CSR_BC4) { /* #if MP_DRIVER != 1 */ if (padapter->registrypriv.mp_mode == 0) { if (pbtpriv->BT_Ant_isolation) { rtw_write8(padapter, REG_GPIO_MUXCFG, 0xa0); RTW_INFO("BT write 0x%x = 0x%x\n", REG_GPIO_MUXCFG, 0xa0); } } /* #endif */ u1Tmp = rtw_read8(padapter, 0x4fd) & BIT0; u1Tmp = u1Tmp | ((pbtpriv->BT_Ant_isolation == 1) ? 0 : BIT1) | ((pbtpriv->BT_Service == BT_SCO) ? 0 : BIT2); rtw_write8(padapter, 0x4fd, u1Tmp); RTW_INFO("BT write 0x%x = 0x%x for non-isolation\n", 0x4fd, u1Tmp); rtw_write32(padapter, REG_BT_COEX_TABLE + 4, 0xaaaa9aaa); RTW_INFO("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE + 4, 0xaaaa9aaa); rtw_write32(padapter, REG_BT_COEX_TABLE + 8, 0xffbd0040); RTW_INFO("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE + 8, 0xffbd0040); rtw_write32(padapter, REG_BT_COEX_TABLE + 0xc, 0x40000010); RTW_INFO("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE + 0xc, 0x40000010); /* Config to 1T1R */ u1Tmp = rtw_read8(padapter, rOFDM0_TRxPathEnable); u1Tmp &= ~(BIT1); rtw_write8(padapter, rOFDM0_TRxPathEnable, u1Tmp); RTW_INFO("BT write 0xC04 = 0x%x\n", u1Tmp); u1Tmp = rtw_read8(padapter, rOFDM1_TRxPathEnable); u1Tmp &= ~(BIT1); rtw_write8(padapter, rOFDM1_TRxPathEnable, u1Tmp); RTW_INFO("BT write 0xD04 = 0x%x\n", u1Tmp); } } #endif /* --------------------------------------------------------------- * * MAC init functions * * --------------------------------------------------------------- */ /* Shall USB interface init this? */ static VOID _InitInterrupt( IN PADAPTER Adapter ) { u32 imr, imr_ex; u8 usb_opt; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); #ifdef CONFIG_USB_INTERRUPT_IN_PIPE struct dvobj_priv *pdev = adapter_to_dvobj(Adapter); #endif /* HISR write one to clear */ rtw_write32(Adapter, REG_HISR_88E, 0xFFFFFFFF); /* HIMR - */ imr = IMR_PSTIMEOUT_88E | IMR_TBDER_88E | IMR_CPWM_88E | IMR_CPWM2_88E ; rtw_write32(Adapter, REG_HIMR_88E, imr); pHalData->IntrMask[0] = imr; imr_ex = IMR_TXERR_88E | IMR_RXERR_88E | IMR_TXFOVW_88E | IMR_RXFOVW_88E; rtw_write32(Adapter, REG_HIMRE_88E, imr_ex); pHalData->IntrMask[1] = imr_ex; #ifdef CONFIG_SUPPORT_USB_INT /* REG_USB_SPECIAL_OPTION - BIT(4) */ /* 0; Use interrupt endpoint to upload interrupt pkt */ /* 1; Use bulk endpoint to upload interrupt pkt, */ usb_opt = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION); if ((IS_FULL_SPEED_USB(Adapter)) #ifdef CONFIG_USB_INTERRUPT_IN_PIPE || (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] == 0x05) #endif ) usb_opt = usb_opt & (~INT_BULK_SEL); else usb_opt = usb_opt | (INT_BULK_SEL); rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, usb_opt); #endif/* CONFIG_SUPPORT_USB_INT */ } static VOID _InitQueueReservedPage( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct registry_priv *pregistrypriv = &Adapter->registrypriv; u32 outEPNum = (u32)pHalData->OutEpNumber; u32 numHQ = 0; u32 numLQ = 0; u32 numNQ = 0; u32 numPubQ = 0x00; u32 value32; u8 value8; BOOLEAN bWiFiConfig = pregistrypriv->wifi_spec; if (bWiFiConfig || pregistrypriv->qos_opt_enable) { if (pHalData->OutEpQueueSel & TX_SELE_HQ) numHQ = WMM_NORMAL_PAGE_NUM_HPQ_88E; if (pHalData->OutEpQueueSel & TX_SELE_LQ) numLQ = WMM_NORMAL_PAGE_NUM_LPQ_88E; /* NOTE: This step shall be proceed before writting REG_RQPN. */ if (pHalData->OutEpQueueSel & TX_SELE_NQ) numNQ = WMM_NORMAL_PAGE_NUM_NPQ_88E; } else { if (pHalData->OutEpQueueSel & TX_SELE_HQ) numHQ = NORMAL_PAGE_NUM_HPQ_88E; if (pHalData->OutEpQueueSel & TX_SELE_LQ) numLQ = NORMAL_PAGE_NUM_LPQ_88E; /* NOTE: This step shall be proceed before writting REG_RQPN. */ if (pHalData->OutEpQueueSel & TX_SELE_NQ) numNQ = NORMAL_PAGE_NUM_NPQ_88E; } value8 = (u8)_NPQ(numNQ); rtw_write8(Adapter, REG_RQPN_NPQ, value8); numPubQ = TX_TOTAL_PAGE_NUMBER_88E(Adapter) - numHQ - numLQ - numNQ; /* TX DMA */ value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN; rtw_write32(Adapter, REG_RQPN, value32); } static VOID _InitTxBufferBoundary( IN PADAPTER Adapter, IN u8 txpktbuf_bndy ) { struct registry_priv *pregistrypriv = &Adapter->registrypriv; /* HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); */ /* u16 txdmactrl; */ rtw_write8(Adapter, REG_BCNQ_BDNY, txpktbuf_bndy); rtw_write8(Adapter, REG_MGQ_BDNY, txpktbuf_bndy); rtw_write8(Adapter, REG_WMAC_LBK_BF_HD, txpktbuf_bndy); rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy); rtw_write8(Adapter, REG_TDECTRL + 1, txpktbuf_bndy); } static VOID _InitPageBoundary( IN PADAPTER Adapter ) { /* RX Page Boundary */ u16 rxff_bndy = 0; rxff_bndy = MAX_RX_DMA_BUFFER_SIZE_88E(Adapter) - 1; #if 0 /* RX Page Boundary */ /* srand(static_cast(time(NULL)) ); */ if (bSupportRemoteWakeUp) { Offset = MAX_RX_DMA_BUFFER_SIZE_88E(Adapter) + MAX_TX_REPORT_BUFFER_SIZE - MAX_SUPPORT_WOL_PATTERN_NUM(Adapter) * WKFMCAM_SIZE; Offset = Offset / 128; /* RX page size = 128 byte */ rxff_bndy = (Offset * 128) - 1; } else #endif rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), rxff_bndy); } static VOID _InitNormalChipRegPriority( IN PADAPTER Adapter, IN u16 beQ, IN u16 bkQ, IN u16 viQ, IN u16 voQ, IN u16 mgtQ, IN u16 hiQ ) { u16 value16 = (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7); value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) | _TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) | _TXDMA_MGQ_MAP(mgtQ) | _TXDMA_HIQ_MAP(hiQ); rtw_write16(Adapter, REG_TRXDMA_CTRL, value16); } static VOID _InitNormalChipOneOutEpPriority( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u16 value = 0; switch (pHalData->OutEpQueueSel) { case TX_SELE_HQ: value = QUEUE_HIGH; break; case TX_SELE_LQ: value = QUEUE_LOW; break; case TX_SELE_NQ: value = QUEUE_NORMAL; break; default: /* RT_ASSERT(FALSE,("Shall not reach here!\n")); */ break; } _InitNormalChipRegPriority(Adapter, value, value, value, value, value, value ); } static VOID _InitNormalChipTwoOutEpPriority( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct registry_priv *pregistrypriv = &Adapter->registrypriv; u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ; u16 valueHi = 0; u16 valueLow = 0; switch (pHalData->OutEpQueueSel) { case (TX_SELE_HQ | TX_SELE_LQ): valueHi = QUEUE_HIGH; valueLow = QUEUE_LOW; break; case (TX_SELE_NQ | TX_SELE_LQ): valueHi = QUEUE_NORMAL; valueLow = QUEUE_LOW; break; case (TX_SELE_HQ | TX_SELE_NQ): valueHi = QUEUE_HIGH; valueLow = QUEUE_NORMAL; break; default: /* RT_ASSERT(FALSE,("Shall not reach here!\n")); */ break; } if (!pregistrypriv->wifi_spec) { beQ = valueLow; bkQ = valueLow; viQ = valueHi; voQ = valueHi; mgtQ = valueHi; hiQ = valueHi; } else { /* for WMM ,CONFIG_OUT_EP_WIFI_MODE */ beQ = valueLow; bkQ = valueHi; viQ = valueHi; voQ = valueLow; mgtQ = valueHi; hiQ = valueHi; } _InitNormalChipRegPriority(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ); } static VOID _InitNormalChipThreeOutEpPriority( IN PADAPTER Adapter ) { struct registry_priv *pregistrypriv = &Adapter->registrypriv; u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ; if (!pregistrypriv->wifi_spec) { /* typical setting */ beQ = QUEUE_LOW; bkQ = QUEUE_LOW; viQ = QUEUE_NORMAL; voQ = QUEUE_HIGH; mgtQ = QUEUE_HIGH; hiQ = QUEUE_HIGH; } else { /* for WMM */ beQ = QUEUE_LOW; bkQ = QUEUE_NORMAL; viQ = QUEUE_NORMAL; voQ = QUEUE_HIGH; mgtQ = QUEUE_HIGH; hiQ = QUEUE_HIGH; } _InitNormalChipRegPriority(Adapter, beQ, bkQ, viQ, voQ, mgtQ, hiQ); } static VOID _InitQueuePriority( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); switch (pHalData->OutEpNumber) { case 1: _InitNormalChipOneOutEpPriority(Adapter); break; case 2: _InitNormalChipTwoOutEpPriority(Adapter); break; case 3: _InitNormalChipThreeOutEpPriority(Adapter); break; default: /* RT_ASSERT(FALSE,("Shall not reach here!\n")); */ break; } } static VOID _InitHardwareDropIncorrectBulkOut( IN PADAPTER Adapter ) { #ifdef ENABLE_USB_DROP_INCORRECT_OUT u32 value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK); value32 |= DROP_DATA_EN; rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32); #endif } static VOID _InitNetworkType( IN PADAPTER Adapter ) { u32 value32; value32 = rtw_read32(Adapter, REG_CR); /* TODO: use the other function to set network type */ value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP); rtw_write32(Adapter, REG_CR, value32); /* RASSERT(pIoBase->rtw_read8(REG_CR + 2) == 0x2); */ } static VOID _InitDriverInfoSize( IN PADAPTER Adapter, IN u8 drvInfoSize ) { rtw_write8(Adapter, REG_RX_DRVINFO_SZ, drvInfoSize); } static VOID _InitWMACSetting( IN PADAPTER Adapter ) { /* u4Byte value32; */ /* u16 value16; */ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u32 rcr; /* rcr = AAP | APM | AM | AB | APP_ICV | ADF | AMF | APP_FCS | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS; */ /* rcr = */ /* RCR_AAP | RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYSTS; */ /* don't turn on AAP, it will allow all packets to driver */ rcr = RCR_APM | RCR_AM | RCR_AB | RCR_CBSSID_DATA | RCR_CBSSID_BCN | RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYST_RXFF; #if (1 == RTL8188E_RX_PACKET_INCLUDE_CRC) rcr |= ACRC32; #endif rtw_hal_set_hwreg(Adapter, HW_VAR_RCR, (u8 *)&rcr); /* Accept all multicast address */ rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF); rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF); /* Accept all data frames */ /* value16 = 0xFFFF; */ /* rtw_write16(Adapter, REG_RXFLTMAP2, value16); */ /* 2010.09.08 hpfan */ /* Since ADF is removed from RCR, ps-poll will not be indicate to driver, */ /* RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll. */ /* value16 = 0x400; */ /* rtw_write16(Adapter, REG_RXFLTMAP1, value16); */ /* Accept all management frames */ /* value16 = 0xFFFF; */ /* rtw_write16(Adapter, REG_RXFLTMAP0, value16); */ /* enable RX_SHIFT bits */ /* rtw_write8(Adapter, REG_TRXDMA_CTRL, rtw_read8(Adapter, REG_TRXDMA_CTRL)|BIT(1)); */ } static VOID _InitAdaptiveCtrl( IN PADAPTER Adapter ) { u16 value16; u32 value32; /* Response Rate Set */ value32 = rtw_read32(Adapter, REG_RRSR); value32 &= ~RATE_BITMAP_ALL; value32 |= RATE_RRSR_CCK_ONLY_1M; rtw_write32(Adapter, REG_RRSR, value32); /* CF-END Threshold */ /* m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1); */ /* SIFS (used in NAV) */ value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10); rtw_write16(Adapter, REG_SPEC_SIFS, value16); /* Retry Limit */ value16 = _LRL(RL_VAL_STA) | _SRL(RL_VAL_STA); rtw_write16(Adapter, REG_RL, value16); } static VOID _InitEDCA( IN PADAPTER Adapter ) { /* Set Spec SIFS (used in NAV) */ rtw_write16(Adapter, REG_SPEC_SIFS, 0x100a); rtw_write16(Adapter, REG_MAC_SPEC_SIFS, 0x100a); /* Set SIFS for CCK */ rtw_write16(Adapter, REG_SIFS_CTX, 0x100a); /* Set SIFS for OFDM */ rtw_write16(Adapter, REG_SIFS_TRX, 0x100a); /* TXOP */ rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B); rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F); rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324); rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226); } static VOID _InitBeaconMaxError( IN PADAPTER Adapter, IN BOOLEAN InfraMode ) { } #ifdef CONFIG_RTW_LED static void _InitHWLed(PADAPTER Adapter) { struct led_priv *pledpriv = adapter_to_led(Adapter); if (pledpriv->LedStrategy != HW_LED) return; /* HW led control * to do .... * must consider cases of antenna diversity/ commbo card/solo card/mini card */ } #endif /* CONFIG_RTW_LED */ static VOID _InitRDGSetting( IN PADAPTER Adapter ) { rtw_write8(Adapter, REG_RD_CTRL, 0xFF); rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200); rtw_write8(Adapter, REG_RD_RESP_PKT_TH, 0x05); } static VOID _InitRetryFunction( IN PADAPTER Adapter ) { u8 value8; value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL); value8 |= EN_AMPDU_RTY_NEW; rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8); /* Set ACK timeout */ rtw_write8(Adapter, REG_ACKTO, 0x40); } /*----------------------------------------------------------------------------- * Function: usb_AggSettingTxUpdate() * * Overview: Seperate TX/RX parameters update independent for TP detection and * dynamic TX/RX aggreagtion parameters update. * * Input: PADAPTER * * Output/Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Seperate to smaller function. * *---------------------------------------------------------------------------*/ static VOID usb_AggSettingTxUpdate( IN PADAPTER Adapter ) { #ifdef CONFIG_USB_TX_AGGREGATION HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */ u32 value32; if (Adapter->registrypriv.wifi_spec) pHalData->UsbTxAggMode = _FALSE; if (pHalData->UsbTxAggMode) { value32 = rtw_read32(Adapter, REG_TDECTRL); value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT); value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT); rtw_write32(Adapter, REG_TDECTRL, value32); } #endif } /* usb_AggSettingTxUpdate */ /*----------------------------------------------------------------------------- * Function: usb_AggSettingRxUpdate() * * Overview: Seperate TX/RX parameters update independent for TP detection and * dynamic TX/RX aggreagtion parameters update. * * Input: PADAPTER * * Output/Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Seperate to smaller function. * *---------------------------------------------------------------------------*/ static VOID usb_AggSettingRxUpdate( IN PADAPTER Adapter ) { #ifdef CONFIG_USB_RX_AGGREGATION HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */ u8 valueDMA; u8 valueUSB; valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL); valueUSB = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION); switch (pHalData->rxagg_mode) { case RX_AGG_DMA: valueDMA |= RXDMA_AGG_EN; valueUSB &= ~USB_AGG_EN; break; case RX_AGG_USB: valueDMA &= ~RXDMA_AGG_EN; valueUSB |= USB_AGG_EN; break; case RX_AGG_MIX: valueDMA |= RXDMA_AGG_EN; valueUSB |= USB_AGG_EN; break; case RX_AGG_DISABLE: default: valueDMA &= ~RXDMA_AGG_EN; valueUSB &= ~USB_AGG_EN; break; } rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA); rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, valueUSB); switch (pHalData->rxagg_mode) { case RX_AGG_DMA: rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->rxagg_dma_size); rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 1, pHalData->rxagg_dma_timeout); break; case RX_AGG_USB: rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->rxagg_usb_size); rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->rxagg_usb_timeout); break; case RX_AGG_MIX: rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->rxagg_dma_size); rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH + 1, pHalData->rxagg_dma_timeout & 0x1F); /* 0x280[12:8] */ rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->rxagg_usb_size); rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->rxagg_usb_timeout); break; case RX_AGG_DISABLE: default: /* TODO: */ break; } switch (PBP_128) { case PBP_128: pHalData->HwRxPageSize = 128; break; case PBP_64: pHalData->HwRxPageSize = 64; break; case PBP_256: pHalData->HwRxPageSize = 256; break; case PBP_512: pHalData->HwRxPageSize = 512; break; case PBP_1024: pHalData->HwRxPageSize = 1024; break; default: /* RT_ASSERT(FALSE, ("RX_PAGE_SIZE_REG_VALUE definition is incorrect!\n")); */ break; } #endif } /* usb_AggSettingRxUpdate */ static VOID InitUsbAggregationSetting( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* Tx aggregation setting */ usb_AggSettingTxUpdate(Adapter); /* Rx aggregation setting */ usb_AggSettingRxUpdate(Adapter); /* 201/12/10 MH Add for USB agg mode dynamic switch. */ pHalData->UsbRxHighSpeedMode = _FALSE; } VOID HalRxAggr8188EUsb( IN PADAPTER Adapter, IN BOOLEAN Value ) { #if 0/* USB_RX_AGGREGATION_92C */ PMGNT_INFO pMgntInfo = &Adapter->MgntInfo; u1Byte valueDMATimeout; u1Byte valueDMAPageCount; u1Byte valueUSBTimeout; u1Byte valueUSBBlockCount; /* selection to prevent bad TP. */ if (IS_WIRELESS_MODE_B(Adapter) || IS_WIRELESS_MODE_G(Adapter) || IS_WIRELESS_MODE_A(Adapter) || pMgntInfo->bWiFiConfg) { /* 2010.04.27 hpfan */ /* Adjust RxAggrTimeout to close to zero disable RxAggr, suggested by designer */ /* Timeout value is calculated by 34 / (2^n) */ valueDMATimeout = 0x0f; valueDMAPageCount = 0x01; valueUSBTimeout = 0x0f; valueUSBBlockCount = 0x01; rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_PGTO, (pu1Byte)&valueDMATimeout); rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_PGTH, (pu1Byte)&valueDMAPageCount); rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_USBTO, (pu1Byte)&valueUSBTimeout); rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_USBTH, (pu1Byte)&valueUSBBlockCount); } else { rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_USBTO, (pu1Byte)&pMgntInfo->RegRxAggBlockTimeout); rtw_hal_set_hwreg(Adapter, HW_VAR_RX_AGGR_USBTH, (pu1Byte)&pMgntInfo->RegRxAggBlockCount); } #endif } /*----------------------------------------------------------------------------- * Function: USB_AggModeSwitch() * * Overview: When RX traffic is more than 40M, we need to adjust some parameters to increase * RX speed by increasing batch indication size. This will decrease TCP ACK speed, we * need to monitor the influence of FTP/network share. * For TX mode, we are still ubder investigation. * * Input: PADAPTER * * Output: NONE * * Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Create Version 0. * *---------------------------------------------------------------------------*/ VOID USB_AggModeSwitch( IN PADAPTER Adapter ) { #if 0 HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); /* pHalData->UsbRxHighSpeedMode = FALSE; */ /* How to measure the RX speed? We assume that when traffic is more than */ if (pMgntInfo->bRegAggDMEnable == FALSE) { return; /* Inf not support. */ } if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == TRUE && pHalData->UsbRxHighSpeedMode == FALSE) { pHalData->UsbRxHighSpeedMode = TRUE; } else if (pMgntInfo->LinkDetectInfo.bHigherBusyRxTraffic == FALSE && pHalData->UsbRxHighSpeedMode == TRUE) { pHalData->UsbRxHighSpeedMode = FALSE; } else return; #if USB_RX_AGGREGATION_92C if (pHalData->UsbRxHighSpeedMode == TRUE) { /* 2010/12/10 MH The parameter is tested by SD1 engineer and SD3 channel emulator. */ /* USB mode */ #if (RT_PLATFORM == PLATFORM_LINUX) if (pMgntInfo->LinkDetectInfo.bTxBusyTraffic) { pHalData->RxAggBlockCount = 16; pHalData->RxAggBlockTimeout = 7; } else #endif { pHalData->RxAggBlockCount = 40; pHalData->RxAggBlockTimeout = 5; } /* Mix mode */ pHalData->RxAggPageCount = 72; pHalData->RxAggPageTimeout = 6; } else { /* USB mode */ pHalData->RxAggBlockCount = pMgntInfo->RegRxAggBlockCount; pHalData->RxAggBlockTimeout = pMgntInfo->RegRxAggBlockTimeout; /* Mix mode */ pHalData->RxAggPageCount = pMgntInfo->RegRxAggPageCount; pHalData->RxAggPageTimeout = pMgntInfo->RegRxAggPageTimeout; } if (pHalData->RxAggBlockCount > MAX_RX_AGG_BLKCNT) pHalData->RxAggBlockCount = MAX_RX_AGG_BLKCNT; #if (OS_WIN_FROM_VISTA(OS_VERSION)) || (RT_PLATFORM == PLATFORM_LINUX) /* do not support WINXP to prevent usbehci.sys BSOD */ if (IS_WIRELESS_MODE_N_24G(Adapter) || IS_WIRELESS_MODE_N_5G(Adapter)) { /* */ /* 2010/12/24 MH According to V1012 QC IOT test, XP BSOD happen when running chariot test */ /* with the aggregation dynamic change!! We need to disable the function to prevent it is broken */ /* in usbehci.sys. */ /* */ usb_AggSettingRxUpdate_8188E(Adapter); /* 2010/12/27 MH According to designer's suggstion, we can only modify Timeout value. Otheriwse */ /* there might many HW incorrect behavior, the XP BSOD at usbehci.sys may be relative to the */ /* issue. Base on the newest test, we can not enable block cnt > 30, otherwise XP usbehci.sys may */ /* BSOD. */ } #endif #endif #endif } /* USB_AggModeSwitch */ static VOID _InitRFType( IN PADAPTER Adapter ) { struct registry_priv *pregpriv = &Adapter->registrypriv; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); #if DISABLE_BB_RF pHalData->rf_chip = RF_PSEUDO_11N; return; #endif pHalData->rf_chip = RF_6052; /* TODO: Consider that EEPROM set 92CU to 1T1R later. */ /* Force to overwrite setting according to chip version. Ignore EEPROM setting. */ /* pHalData->RF_Type = is92CU ? RF_2T2R : RF_1T1R; */ RTW_INFO("Set RF Chip ID to RF_6052 and RF type to %d.\n", pHalData->rf_type); } /* Set CCK and OFDM Block "ON" */ static VOID _BBTurnOnBlock( IN PADAPTER Adapter ) { #if (DISABLE_BB_RF) return; #endif phy_set_bb_reg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1); phy_set_bb_reg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1); } static VOID _RfPowerSave( IN PADAPTER Adapter ) { #if 0 HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); enum rf_path eRFPath; #if (DISABLE_BB_RF) return; #endif if (pMgntInfo->RegRfOff == TRUE) { /* User disable RF via registry. */ MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); /* Those action will be discard in MgntActSet_RF_State because off the same state */ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) phy_set_rf_reg(Adapter, eRFPath, 0x4, 0xC00, 0x0); } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { /* H/W or S/W RF OFF before sleep. */ MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); } else { pHalData->eRFPowerState = eRfOn; pMgntInfo->RfOffReason = 0; if (Adapter->bInSetPower || Adapter->bResetInProgress) PlatformUsbEnableInPipes(Adapter); } #endif } enum { Antenna_Lfet = 1, Antenna_Right = 2, }; static VOID _InitAntenna_Selection(IN PADAPTER Adapter) { #ifdef CONFIG_ANTENNA_DIVERSITY HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); if (pHalData->AntDivCfg == 0) return; RTW_INFO("==> %s ....\n", __FUNCTION__); rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0) | BIT23); phy_set_bb_reg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01); #endif } /* * 2010/08/26 MH Add for selective suspend mode check. * If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and * slim card. * */ static VOID HalDetectSelectiveSuspendMode( IN PADAPTER Adapter ) { #if 0 u8 tmpvalue; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(Adapter); /* If support HW radio detect, we need to enable WOL ability, otherwise, we */ /* can not use FW to notify host the power state switch. */ EFUSE_ShadowRead(Adapter, 1, EEPROM_USB_OPTIONAL1, (u32 *)&tmpvalue); RTW_INFO("HalDetectSelectiveSuspendMode(): SS "); if (tmpvalue & BIT1) RTW_INFO("Enable\n"); else { RTW_INFO("Disable\n"); pdvobjpriv->RegUsbSS = _FALSE; } /* 2010/09/01 MH According to Dongle Selective Suspend INF. We can switch SS mode. */ if (pdvobjpriv->RegUsbSS && !SUPPORT_HW_RADIO_DETECT(pHalData)) { /* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */ /* if (!pMgntInfo->bRegDongleSS) */ /* { */ pdvobjpriv->RegUsbSS = _FALSE; /* } */ } #endif } /* HalDetectSelectiveSuspendMode */ #if 0 /*----------------------------------------------------------------------------- * Function: HwSuspendModeEnable92Cu() * * Overview: HW suspend mode switch. * * Input: NONE * * Output: NONE * * Return: NONE * * Revised History: * When Who Remark * 08/23/2010 MHC HW suspend mode switch test.. *---------------------------------------------------------------------------*/ static VOID HwSuspendModeEnable_88eu( IN PADAPTER pAdapter, IN u8 Type ) { /* PRT_USB_DEVICE pDevice = GET_RT_USB_DEVICE(pAdapter); */ u16 reg = rtw_read16(pAdapter, REG_GPIO_MUXCFG); /* if (!pDevice->RegUsbSS) */ { return; } /* */ /* 2010/08/23 MH According to Alfred's suggestion, we need to to prevent HW */ /* to enter suspend mode automatically. Otherwise, it will shut down major power */ /* domain and 8051 will stop. When we try to enter selective suspend mode, we */ /* need to prevent HW to enter D2 mode aumotmatically. Another way, Host will */ /* issue a S10 signal to power domain. Then it will cleat SIC setting(from Yngli). */ /* We need to enable HW suspend mode when enter S3/S4 or disable. We need */ /* to disable HW suspend mode for IPS/radio_off. */ /* */ if (Type == _FALSE) { reg |= BIT14; rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); reg |= BIT12; rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); } else { reg &= (~BIT12); rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); reg &= (~BIT14); rtw_write16(pAdapter, REG_GPIO_MUXCFG, reg); } } /* HwSuspendModeEnable92Cu */ #endif rt_rf_power_state RfOnOffDetect(IN PADAPTER pAdapter) { struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(pAdapter); HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); u8 val8; rt_rf_power_state rfpowerstate = rf_off; if (pwrctl->bHWPowerdown) { val8 = rtw_read8(pAdapter, REG_HSISR); RTW_INFO("pwrdown, 0x5c(BIT7)=%02x\n", val8); rfpowerstate = (val8 & BIT7) ? rf_off : rf_on; } else { /* rf on/off */ rtw_write8(pAdapter, REG_MAC_PINMUX_CFG, rtw_read8(pAdapter, REG_MAC_PINMUX_CFG) & ~(BIT3)); val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL); RTW_INFO("GPIO_IN=%02x\n", val8); rfpowerstate = (val8 & BIT3) ? rf_on : rf_off; } return rfpowerstate; } /* HalDetectPwrDownMode */ void _ps_open_RF(_adapter *padapter); u32 rtl8188eu_hal_init(PADAPTER Adapter) { u8 value8 = 0; u16 value16; u8 txpktbuf_bndy; u32 status = _SUCCESS; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter); struct registry_priv *pregistrypriv = &Adapter->registrypriv; rt_rf_power_state eRfPowerStateToSet; #ifdef CONFIG_BT_COEXIST struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); #endif systime init_start_time = rtw_get_current_time(); #ifdef DBG_HAL_INIT_PROFILING enum HAL_INIT_STAGES { HAL_INIT_STAGES_BEGIN = 0, HAL_INIT_STAGES_INIT_PW_ON, HAL_INIT_STAGES_MISC01, HAL_INIT_STAGES_DOWNLOAD_FW, HAL_INIT_STAGES_MAC, HAL_INIT_STAGES_BB, HAL_INIT_STAGES_RF, HAL_INIT_STAGES_EFUSE_PATCH, HAL_INIT_STAGES_INIT_LLTT, HAL_INIT_STAGES_MISC02, HAL_INIT_STAGES_TURN_ON_BLOCK, HAL_INIT_STAGES_INIT_SECURITY, HAL_INIT_STAGES_MISC11, HAL_INIT_STAGES_INIT_HAL_DM, /* HAL_INIT_STAGES_RF_PS, */ HAL_INIT_STAGES_IQK, HAL_INIT_STAGES_PW_TRACK, HAL_INIT_STAGES_LCK, /* HAL_INIT_STAGES_MISC21, */ /* HAL_INIT_STAGES_INIT_PABIAS, */ #ifdef CONFIG_BT_COEXIST HAL_INIT_STAGES_BT_COEXIST, #endif /* HAL_INIT_STAGES_ANTENNA_SEL, */ /* HAL_INIT_STAGES_MISC31, */ HAL_INIT_STAGES_END, HAL_INIT_STAGES_NUM }; char *hal_init_stages_str[] = { "HAL_INIT_STAGES_BEGIN", "HAL_INIT_STAGES_INIT_PW_ON", "HAL_INIT_STAGES_MISC01", "HAL_INIT_STAGES_DOWNLOAD_FW", "HAL_INIT_STAGES_MAC", "HAL_INIT_STAGES_BB", "HAL_INIT_STAGES_RF", "HAL_INIT_STAGES_EFUSE_PATCH", "HAL_INIT_STAGES_INIT_LLTT", "HAL_INIT_STAGES_MISC02", "HAL_INIT_STAGES_TURN_ON_BLOCK", "HAL_INIT_STAGES_INIT_SECURITY", "HAL_INIT_STAGES_MISC11", "HAL_INIT_STAGES_INIT_HAL_DM", /* "HAL_INIT_STAGES_RF_PS", */ "HAL_INIT_STAGES_IQK", "HAL_INIT_STAGES_PW_TRACK", "HAL_INIT_STAGES_LCK", /* "HAL_INIT_STAGES_MISC21", */ #ifdef CONFIG_BT_COEXIST "HAL_INIT_STAGES_BT_COEXIST", #endif /* "HAL_INIT_STAGES_ANTENNA_SEL", */ /* "HAL_INIT_STAGES_MISC31", */ "HAL_INIT_STAGES_END", }; int hal_init_profiling_i; systime hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; /* used to record the time of each stage's starting point */ for (hal_init_profiling_i = 0; hal_init_profiling_i < HAL_INIT_STAGES_NUM; hal_init_profiling_i++) hal_init_stages_timestamp[hal_init_profiling_i] = 0; #define HAL_INIT_PROFILE_TAG(stage) do { hal_init_stages_timestamp[(stage)] = rtw_get_current_time(); } while (0) #else #define HAL_INIT_PROFILE_TAG(stage) do {} while (0) #endif /* DBG_HAL_INIT_PROFILING */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BEGIN); if (pwrctrlpriv->bkeepfwalive) { _ps_open_RF(Adapter); if (pHalData->bIQKInitialized) { /* PHY_IQCalibrate(padapter, _TRUE); */ /*phy_iq_calibrate_8188e(Adapter, _TRUE);*/ halrf_iqk_trigger(&pHalData->odmpriv, _TRUE); } else { /* PHY_IQCalibrate(padapter, _FALSE); */ /*phy_iq_calibrate_8188e(Adapter, _FALSE);*/ halrf_iqk_trigger(&pHalData->odmpriv, _FALSE); pHalData->bIQKInitialized = _TRUE; } /* dm_check_txpowertracking(padapter); * phy_lc_calibrate(padapter); */ odm_txpowertracking_check(&pHalData->odmpriv); /*phy_lc_calibrate_8188e(&pHalData->odmpriv);*/ halrf_lck_trigger(&pHalData->odmpriv); goto exit; } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON); status = rtw_hal_power_on(Adapter); if (status == _FAIL) { goto exit; } /* Set RF type for BB/RF configuration */ _InitRFType(Adapter);/* ->_ReadRFType() */ /* Save target channel */ /* Current Channel will be updated again later. */ pHalData->current_channel = 6;/* default set to 6 */ if (pwrctrlpriv->reg_rfoff == _TRUE) pwrctrlpriv->rf_pwrstate = rf_off; /* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */ /* HW GPIO pin. Before PHY_RFConfig8192C. */ /* HalDetectPwrDownMode(Adapter); */ /* 2010/08/26 MH If Efuse does not support sective suspend then disable the function. */ /*HalDetectSelectiveSuspendMode(Adapter);*/ if (!pregistrypriv->wifi_spec) txpktbuf_bndy = TX_PAGE_BOUNDARY_88E(Adapter); else { /* for WMM */ txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_88E(Adapter); } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01); _InitQueueReservedPage(Adapter); _InitQueuePriority(Adapter); _InitPageBoundary(Adapter); _InitTransferPageSize(Adapter); #ifdef CONFIG_IOL_IOREG_CFG _InitTxBufferBoundary(Adapter, 0); #endif HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW); if (Adapter->registrypriv.mp_mode == 0) { status = rtl8188e_FirmwareDownload(Adapter, _FALSE); if (status != _SUCCESS) { RTW_INFO("%s: Download Firmware failed!!\n", __FUNCTION__); pHalData->bFWReady = _FALSE; pHalData->fw_ractrl = _FALSE; return status; } else { pHalData->bFWReady = _TRUE; #ifdef CONFIG_SFW_SUPPORTED pHalData->fw_ractrl = IS_VENDOR_8188E_I_CUT_SERIES(Adapter) ? _TRUE : _FALSE; #else pHalData->fw_ractrl = _FALSE; #endif } } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC); #if (HAL_MAC_ENABLE == 1) status = PHY_MACConfig8188E(Adapter); if (status == _FAIL) { RTW_INFO(" ### Failed to init MAC ......\n "); goto exit; } #endif /* */ /* d. Initialize BB related configurations. */ /* */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB); #if (HAL_BB_ENABLE == 1) status = PHY_BBConfig8188E(Adapter); if (status == _FAIL) { RTW_INFO(" ### Failed to init BB ......\n "); goto exit; } #endif HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF); #if (HAL_RF_ENABLE == 1) status = PHY_RFConfig8188E(Adapter); if (status == _FAIL) { RTW_INFO(" ### Failed to init RF ......\n "); goto exit; } #endif HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_EFUSE_PATCH); #if defined(CONFIG_IOL_EFUSE_PATCH) status = rtl8188e_iol_efuse_patch(Adapter); if (status == _FAIL) { RTW_INFO("%s rtl8188e_iol_efuse_patch failed\n", __FUNCTION__); goto exit; } #endif _InitTxBufferBoundary(Adapter, txpktbuf_bndy); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT); status = InitLLTTable(Adapter, txpktbuf_bndy); if (status == _FAIL) { goto exit; } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02); /* Get Rx PHY status in order to report RSSI and others. */ _InitDriverInfoSize(Adapter, DRVINFO_SZ); _InitInterrupt(Adapter); _InitNetworkType(Adapter);/* set msr */ _InitWMACSetting(Adapter); _InitAdaptiveCtrl(Adapter); _InitEDCA(Adapter); _InitRetryFunction(Adapter); InitUsbAggregationSetting(Adapter); InitBeaconParameters_8188e(Adapter); _InitBeaconMaxError(Adapter, _TRUE); /* */ /* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */ /* Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */ /* */ /* Enable MACTXEN/MACRXEN block */ value16 = rtw_read16(Adapter, REG_CR); value16 |= (MACTXEN | MACRXEN); rtw_write8(Adapter, REG_CR, value16); _InitHardwareDropIncorrectBulkOut(Adapter); if (pHalData->bRDGEnable) _InitRDGSetting(Adapter); /* Enable TX Report & Tx Report Timer */ value8 = rtw_read8(Adapter, REG_TX_RPT_CTRL); rtw_write8(Adapter, REG_TX_RPT_CTRL, (value8 | BIT1 | BIT0)); #if (RATE_ADAPTIVE_SUPPORT == 1) if (!pHalData->fw_ractrl) { /* Set MAX RPT MACID */ rtw_write8(Adapter, REG_TX_RPT_CTRL + 1, 2); /* FOR sta mode ,0: bc/mc ,1:AP */ /* Tx RPT Timer. Unit: 32us */ rtw_write16(Adapter, REG_TX_RPT_TIME, 0xCdf0); } else #endif { /* disable tx rpt */ rtw_write8(Adapter, REG_TX_RPT_CTRL + 1, 0); /* FOR sta mode ,0: bc/mc ,1:AP */ } #if 0 if (pHTInfo->bRDGEnable) _InitRDGSetting_8188E(Adapter); #endif #ifdef CONFIG_TX_EARLY_MODE if (pHalData->bEarlyModeEnable) { value8 = rtw_read8(Adapter, REG_EARLY_MODE_CONTROL); #if RTL8188E_EARLY_MODE_PKT_NUM_10 == 1 value8 = value8 | 0x1f; #else value8 = value8 | 0xf; #endif rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, value8); rtw_write8(Adapter, REG_EARLY_MODE_CONTROL + 3, 0x80); value8 = rtw_read8(Adapter, REG_TCR + 1); value8 = value8 | 0x40; rtw_write8(Adapter, REG_TCR + 1, value8); } else #endif { rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, 0); } rtw_write32(Adapter, REG_MACID_NO_LINK_0, 0xFFFFFFFF); rtw_write32(Adapter, REG_MACID_NO_LINK_1, 0xFFFFFFFF); #if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_TX_MCAST2UNI) #ifdef CONFIG_CHECK_AC_LIFETIME /* Enable lifetime check for the four ACs */ rtw_write8(Adapter, REG_LIFETIME_CTRL, rtw_read8(Adapter, REG_LIFETIME_CTRL) | 0x0f); #endif /* CONFIG_CHECK_AC_LIFETIME */ #ifdef CONFIG_TX_MCAST2UNI rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ #else /* CONFIG_TX_MCAST2UNI */ rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x3000); /* unit: 256us. 3s */ rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x3000); /* unit: 256us. 3s */ #endif /* CONFIG_TX_MCAST2UNI */ #endif /* CONFIG_CONCURRENT_MODE || CONFIG_TX_MCAST2UNI */ #ifdef CONFIG_RTW_LED _InitHWLed(Adapter); #endif /* CONFIG_RTW_LED */ /* */ /* Joseph Note: Keep RfRegChnlVal for later use. */ /* */ pHalData->RfRegChnlVal[0] = phy_query_rf_reg(Adapter, 0, RF_CHNLBW, bRFRegOffsetMask); pHalData->RfRegChnlVal[1] = phy_query_rf_reg(Adapter, 1, RF_CHNLBW, bRFRegOffsetMask); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK); _BBTurnOnBlock(Adapter); /* NicIFSetMacAddress(padapter, padapter->PermanentAddress); */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY); invalidate_cam_all(Adapter); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11); /* 2010/12/17 MH We need to set TX power according to EFUSE content at first. */ PHY_SetTxPowerLevel8188E(Adapter, pHalData->current_channel); /* Move by Neo for USB SS to below setp * _RfPowerSave(Adapter); */ _InitAntenna_Selection(Adapter); /* */ /* Disable BAR, suggested by Scott */ /* 2010.04.09 add by hpfan */ /* */ rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff); /* HW SEQ CTRL */ /* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */ rtw_write8(Adapter, REG_HWSEQ_CTRL, 0xFF); PHY_SetRFEReg_8188E(Adapter); if (pregistrypriv->wifi_spec) { rtw_write16(Adapter, REG_FAST_EDCA_CTRL , 0); /* Nav limit , suggest by scott */ rtw_write8(Adapter, REG_NAV_UPPER, 0x0); } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM); rtl8188e_InitHalDm(Adapter); #if (MP_DRIVER == 1) if (Adapter->registrypriv.mp_mode == 1) { Adapter->mppriv.channel = pHalData->current_channel; MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel); } else #endif /* #if (MP_DRIVER == 1) */ { /* */ /* 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status */ /* and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not */ /* call init_adapter. May cause some problem?? */ /* */ /* Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed */ /* in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState */ /* is the same as eRfOff, we should change it to eRfOn after we config RF parameters. */ /* Added by tynli. 2010.03.30. */ pwrctrlpriv->rf_pwrstate = rf_on; if (!pHalData->fw_ractrl) { /* enable Tx report. */ rtw_write8(Adapter, REG_FWHW_TXQ_CTRL + 1, 0x0F); /* tynli_test_tx_report. */ rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0); } /* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */ rtw_write8(Adapter, REG_EARLY_MODE_CONTROL + 3, 0x01); /* Pretx_en, for WEP/TKIP SEC */ /* enable tx DMA to drop the redundate data of packet */ rtw_write16(Adapter, REG_TXDMA_OFFSET_CHK, (rtw_read16(Adapter, REG_TXDMA_OFFSET_CHK) | DROP_DATA_EN)); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK); /* 2010/08/26 MH Merge from 8192CE. */ if (pwrctrlpriv->rf_pwrstate == rf_on) { pHalData->neediqk_24g = _TRUE; HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK); odm_txpowertracking_check(&pHalData->odmpriv); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK); /*phy_lc_calibrate_8188e(&pHalData->odmpriv);*/ halrf_lck_trigger(&pHalData->odmpriv); } } /* HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS); * _InitPABias(Adapter); */ rtw_write8(Adapter, REG_USB_HRPWM, 0); #ifdef CONFIG_XMIT_ACK /* ack for xmit mgmt frames. */ rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL) | BIT(12)); #endif /* CONFIG_XMIT_ACK */ exit: HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END); RTW_INFO("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time)); #ifdef DBG_HAL_INIT_PROFILING hal_init_stages_timestamp[HAL_INIT_STAGES_END] = rtw_get_current_time(); for (hal_init_profiling_i = 0; hal_init_profiling_i < HAL_INIT_STAGES_NUM - 1; hal_init_profiling_i++) { RTW_INFO("DBG_HAL_INIT_PROFILING: %35s, %u, %5u, %5u\n" , hal_init_stages_str[hal_init_profiling_i] , hal_init_stages_timestamp[hal_init_profiling_i] , (hal_init_stages_timestamp[hal_init_profiling_i + 1] - hal_init_stages_timestamp[hal_init_profiling_i]) , rtw_get_time_interval_ms(hal_init_stages_timestamp[hal_init_profiling_i], hal_init_stages_timestamp[hal_init_profiling_i + 1]) ); } #endif return status; } void _ps_open_RF(_adapter *padapter) { /* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */ /* phy_SsPwrSwitch92CU(padapter, rf_on, 1); */ } void _ps_close_RF(_adapter *padapter) { /* here call with bRegSSPwrLvl 1, bRegSSPwrLvl 2 needs to be verified */ /* phy_SsPwrSwitch92CU(padapter, rf_off, 1); */ } VOID hal_poweroff_8188eu( IN PADAPTER Adapter ) { u8 val8; u16 val16; u32 val32; u8 bMacPwrCtrlOn = _FALSE; rtw_hal_get_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); if (bMacPwrCtrlOn == _FALSE) return ; /* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */ val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL); rtw_write8(Adapter, REG_TX_RPT_CTRL, val8 & (~BIT1)); /* stop rx */ rtw_write8(Adapter, REG_CR, 0x0); /* Run LPS WL RFOFF flow */ HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_LPS_ENTER_FLOW); /* 2. 0x1F[7:0] = 0 */ /* turn off RF */ /* rtw_write8(Adapter, REG_RF_CTRL, 0x00); */ val8 = rtw_read8(Adapter, REG_MCUFWDL); if ((val8 & RAM_DL_SEL) && GET_HAL_DATA(Adapter)->bFWReady) { /* 8051 RAM code */ /* _8051Reset88E(padapter); */ /* Reset MCU 0x2[10]=0. */ val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN + 1); val8 &= ~BIT(2); /* 0x2[10], FEN_CPUEN */ rtw_write8(Adapter, REG_SYS_FUNC_EN + 1, val8); } /* val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN+1); */ /* val8 &= ~BIT(2); */ /* 0x2[10], FEN_CPUEN */ /* rtw_write8(Adapter, REG_SYS_FUNC_EN+1, val8); */ /* MCUFWDL 0x80[1:0]=0 */ /* reset MCU ready status */ rtw_write8(Adapter, REG_MCUFWDL, 0); /* YJ,add,111212 */ /* Disable 32k */ val8 = rtw_read8(Adapter, REG_32K_CTRL); rtw_write8(Adapter, REG_32K_CTRL, val8 & (~BIT0)); /* Card disable power action flow */ HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW); /* Reset MCU IO Wrapper */ val8 = rtw_read8(Adapter, REG_RSV_CTRL + 1); rtw_write8(Adapter, REG_RSV_CTRL + 1, (val8 & (~BIT3))); val8 = rtw_read8(Adapter, REG_RSV_CTRL + 1); rtw_write8(Adapter, REG_RSV_CTRL + 1, val8 | BIT3); #if 0 /* 7. RSV_CTRL 0x1C[7:0] = 0x0E */ /* lock ISO/CLK/Power control register */ rtw_write8(Adapter, REG_RSV_CTRL, 0x0e); #endif #if 1 /* YJ,test add, 111207. For Power Consumption. */ val8 = rtw_read8(Adapter, GPIO_IN); rtw_write8(Adapter, GPIO_OUT, val8); rtw_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */ val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL); /* rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4)|val8); */ rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8 << 4)); val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL + 1); rtw_write8(Adapter, REG_GPIO_IO_SEL + 1, val8 | 0x0F); /* Reg0x43 */ rtw_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */ #endif GET_HAL_DATA(Adapter)->bFWReady = _FALSE; bMacPwrCtrlOn = _FALSE; rtw_hal_set_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); } static void rtl8188eu_hw_power_down(_adapter *padapter) { /* 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. */ /* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */ /* Enable register area 0x0-0xc. */ rtw_write8(padapter, REG_RSV_CTRL, 0x0); rtw_write16(padapter, REG_APS_FSMCO, 0x8812); } u32 rtl8188eu_hal_deinit(PADAPTER Adapter) { struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter); HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); RTW_INFO("==> %s\n", __FUNCTION__); #ifdef CONFIG_SUPPORT_USB_INT rtw_write32(Adapter, REG_HIMR_88E, IMR_DISABLED_88E); rtw_write32(Adapter, REG_HIMRE_88E, IMR_DISABLED_88E); #endif #ifdef SUPPORT_HW_RFOFF_DETECTED RTW_INFO("bkeepfwalive(%x)\n", pwrctl->bkeepfwalive); if (pwrctl->bkeepfwalive) { _ps_close_RF(Adapter); if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown)) rtl8188eu_hw_power_down(Adapter); } else #endif { if (rtw_is_hw_init_completed(Adapter)) { rtw_hal_power_off(Adapter); if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown)) rtl8188eu_hw_power_down(Adapter); } } return _SUCCESS; } unsigned int rtl8188eu_inirp_init(PADAPTER Adapter) { u8 i; struct recv_buf *precvbuf; uint status; struct dvobj_priv *pdev = adapter_to_dvobj(Adapter); struct intf_hdl *pintfhdl = &Adapter->iopriv.intf; struct recv_priv *precvpriv = &(Adapter->recvpriv); u32(*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); #ifdef CONFIG_USB_INTERRUPT_IN_PIPE HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u32(*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr); #endif _read_port = pintfhdl->io_ops._read_port; status = _SUCCESS; precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR; /* issue Rx irp to receive data */ precvbuf = (struct recv_buf *)precvpriv->precv_buf; for (i = 0; i < NR_RECVBUFF; i++) { if (_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE) { status = _FAIL; goto exit; } precvbuf++; precvpriv->free_recv_buf_queue_cnt--; } #ifdef CONFIG_USB_INTERRUPT_IN_PIPE if (pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX] != 0x05) { status = _FAIL; RTW_INFO("%s =>Warning !! Have not USB Int-IN pipe, RtIntInPipe(%d)!!!\n", __func__, pdev->RtInPipe[REALTEK_USB_IN_INT_EP_IDX]); goto exit; } _read_interrupt = pintfhdl->io_ops._read_interrupt; if (_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE) { status = _FAIL; } #endif exit: return status; } unsigned int rtl8188eu_inirp_deinit(PADAPTER Adapter) { rtw_read_port_cancel(Adapter); return _SUCCESS; } /* ------------------------------------------------------------------------- * * EEPROM Power index mapping * * ------------------------------------------------------------------------- */ /* ------------------------------------------------------------------- * * EEPROM/EFUSE Content Parsing * * ------------------------------------------------------------------- */ static VOID _ReadLEDSetting( IN PADAPTER Adapter, IN u8 *PROMContent, IN BOOLEAN AutoloadFail ) { #ifdef CONFIG_RTW_LED struct led_priv *pledpriv = adapter_to_led(Adapter); HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); #ifdef CONFIG_RTW_SW_LED pledpriv->bRegUseLed = _TRUE; switch (pHalData->CustomerID) { default: pledpriv->LedStrategy = SW_LED_MODE1; break; } pHalData->bLedOpenDrain = _TRUE;/* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */ #else /* HW LED */ pledpriv->LedStrategy = HW_LED; #endif /* CONFIG_RTW_SW_LED */ #endif } static VOID _ReadRFSetting( IN PADAPTER Adapter, IN u8 *PROMContent, IN BOOLEAN AutoloadFail ) { } static VOID hal_InitPGData( IN PADAPTER pAdapter, IN OUT u8 *PROMContent ) { #if 0 HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); u32 i; u16 value16; if (_FALSE == pHalData->bautoload_fail_flag) { /* autoload OK. */ if (_TRUE == pHalData->EepromOrEfuse) { /* Read all Content from EEPROM or EFUSE. */ for (i = 0; i < HWSET_MAX_SIZE_88E; i += 2) { /* value16 = EF2Byte(ReadEEprom(pAdapter, (u2Byte) (i>>1))); */ /* *((u16 *)(&PROMContent[i])) = value16; */ } } else { /* Read EFUSE real map to shadow. */ EFUSE_ShadowMapUpdate(pAdapter, EFUSE_WIFI, _FALSE); _rtw_memcpy((void *)PROMContent, (void *)pHalData->efuse_eeprom_data, HWSET_MAX_SIZE_88E); } } else { /* autoload fail */ pHalData->bautoload_fail_flag = _TRUE; /* update to default value 0xFF */ if (_FALSE == pHalData->EepromOrEfuse) EFUSE_ShadowMapUpdate(pAdapter, EFUSE_WIFI, _FALSE); } #endif } static void Hal_EfuseParsePIDVID_8188EU( IN PADAPTER pAdapter, IN u8 *hwinfo, IN BOOLEAN AutoLoadFail ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); if (!AutoLoadFail) { /* VID, PID */ pHalData->EEPROMVID = ReadLE2Byte(&hwinfo[EEPROM_VID_88EU]); pHalData->EEPROMPID = ReadLE2Byte(&hwinfo[EEPROM_PID_88EU]); /* Customer ID, 0x00 and 0xff are reserved for Realtek. */ pHalData->EEPROMCustomerID = *(u8 *)&hwinfo[EEPROM_CustomID_88E]; pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; } else { pHalData->EEPROMVID = EEPROM_Default_VID; pHalData->EEPROMPID = EEPROM_Default_PID; /* Customer ID, 0x00 and 0xff are reserved for Realtek. */ pHalData->EEPROMCustomerID = EEPROM_Default_CustomerID; pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; } RTW_INFO("VID = 0x%04X, PID = 0x%04X\n", pHalData->EEPROMVID, pHalData->EEPROMPID); RTW_INFO("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", pHalData->EEPROMCustomerID, pHalData->EEPROMSubCustomerID); } static void Hal_CustomizeByCustomerID_8188EU( IN PADAPTER padapter ) { #if 0 HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); /* For customized behavior. */ if ((pHalData->EEPROMVID == 0x103C) && (pHalData->EEPROMVID == 0x1629)) /* HP Lite-On for RTL8188CUS Slim Combo. */ pHalData->CustomerID = RT_CID_819x_HP; /* Decide CustomerID according to VID/DID or EEPROM */ switch (pHalData->EEPROMCustomerID) { case EEPROM_CID_DEFAULT: if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3308)) pHalData->CustomerID = RT_CID_DLINK; else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x3309)) pHalData->CustomerID = RT_CID_DLINK; else if ((pHalData->EEPROMVID == 0x2001) && (pHalData->EEPROMPID == 0x330a)) pHalData->CustomerID = RT_CID_DLINK; break; case EEPROM_CID_WHQL: padapter->bInHctTest = TRUE; pMgntInfo->bSupportTurboMode = FALSE; pMgntInfo->bAutoTurboBy8186 = FALSE; pMgntInfo->PowerSaveControl.bInactivePs = FALSE; pMgntInfo->PowerSaveControl.bIPSModeBackup = FALSE; pMgntInfo->PowerSaveControl.bLeisurePs = FALSE; pMgntInfo->PowerSaveControl.bLeisurePsModeBackup = FALSE; pMgntInfo->keepAliveLevel = 0; padapter->bUnloadDriverwhenS3S4 = FALSE; break; default: pHalData->CustomerID = RT_CID_DEFAULT; break; } hal_CustomizedBehavior_8723U(padapter); #endif } static VOID readAdapterInfo_8188EU( IN PADAPTER padapter ) { #if 1 PHAL_DATA_TYPE pHalData = GET_HAL_DATA(padapter); /* parse the eeprom/efuse content */ Hal_EfuseParseIDCode88E(padapter, pHalData->efuse_eeprom_data); Hal_EfuseParsePIDVID_8188EU(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); hal_config_macaddr(padapter, pHalData->bautoload_fail_flag); Hal_ReadPowerSavingMode88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadTxPowerInfo88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_EfuseParseEEPROMVer88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); rtl8188e_EfuseParseChnlPlan(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_EfuseParseXtal_8188E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_EfuseParseCustomerID88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadAntennaDiversity88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_EfuseParseBoardType88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadThermalMeter_88E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadPAType_8188E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadAmplifierType_8188E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); Hal_ReadRFEType_8188E(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); #ifdef CONFIG_RF_POWER_TRIM Hal_ReadRFGainOffset(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); #endif /*CONFIG_RF_POWER_TRIM*/ /* */ /* The following part initialize some vars by PG info. */ /* */ #if defined(CONFIG_WOWLAN) && defined(CONFIG_SDIO_HCI) Hal_DetectWoWMode(padapter); #endif /* CONFIG_WOWLAN && CONFIG_SDIO_HCI */ Hal_CustomizeByCustomerID_8188EU(padapter); _ReadLEDSetting(padapter, pHalData->efuse_eeprom_data, pHalData->bautoload_fail_flag); #else #ifdef CONFIG_INTEL_PROXIM /* for intel proximity */ if (pHalData->rf_type == RF_1T1R) Adapter->proximity.proxim_support = _TRUE; else if (pHalData->rf_type == RF_2T2R) { if ((pHalData->EEPROMPID == 0x8186) && (pHalData->EEPROMVID == 0x0bda)) Adapter->proximity.proxim_support = _TRUE; } else Adapter->proximity.proxim_support = _FALSE; #endif /* CONFIG_INTEL_PROXIM */ #endif } static void _ReadPROMContent( IN PADAPTER Adapter ) { PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); u8 eeValue; /* check system boot selection */ eeValue = rtw_read8(Adapter, REG_9346CR); pHalData->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? _TRUE : _FALSE; pHalData->bautoload_fail_flag = (eeValue & EEPROM_EN) ? _FALSE : _TRUE; RTW_INFO("Boot from %s, Autoload %s !\n", (pHalData->EepromOrEfuse ? "EEPROM" : "EFUSE"), (pHalData->bautoload_fail_flag ? "Fail" : "OK")); /* pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */ Hal_InitPGData88E(Adapter); readAdapterInfo_8188EU(Adapter); } static VOID _ReadRFType( IN PADAPTER Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); #if DISABLE_BB_RF pHalData->rf_chip = RF_PSEUDO_11N; #else pHalData->rf_chip = RF_6052; #endif } static u8 ReadAdapterInfo8188EU(PADAPTER Adapter) { /* Read EEPROM size before call any EEPROM function */ Adapter->EepromAddressSize = GetEEPROMSize8188E(Adapter); /* Efuse_InitSomeVar(Adapter); */ _ReadRFType(Adapter);/* rf_chip->_InitRFType() */ _ReadPROMContent(Adapter); return _SUCCESS; } void UpdateInterruptMask8188EU(PADAPTER padapter, u8 bHIMR0 , u32 AddMSR, u32 RemoveMSR) { HAL_DATA_TYPE *pHalData; u32 *himr; pHalData = GET_HAL_DATA(padapter); if (bHIMR0) himr = &(pHalData->IntrMask[0]); else himr = &(pHalData->IntrMask[1]); if (AddMSR) *himr |= AddMSR; if (RemoveMSR) *himr &= (~RemoveMSR); if (bHIMR0) rtw_write32(padapter, REG_HIMR_88E, *himr); else rtw_write32(padapter, REG_HIMRE_88E, *himr); } u8 SetHwReg8188EU(PADAPTER Adapter, u8 variable, u8 *val) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u8 ret = _SUCCESS; switch (variable) { case HW_VAR_RXDMA_AGG_PG_TH: #ifdef CONFIG_USB_RX_AGGREGATION { u8 threshold = *((u8 *)val); if (threshold == 0) threshold = pHalData->rxagg_dma_size; rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold); } #endif break; case HW_VAR_SET_RPWM: #ifdef CONFIG_LPS_LCLK { u8 ps_state = *((u8 *)val); /* rpwm value only use BIT0(clock bit) ,BIT6(Ack bit), and BIT7(Toggle bit) for 88e. */ /* BIT0 value - 1: 32k, 0:40MHz. */ /* BIT6 value - 1: report cpwm value after success set, 0:do not report. */ /* BIT7 value - Toggle bit change. */ /* modify by Thomas. 2012/4/2. */ ps_state = ps_state & 0xC1; /* RTW_INFO("##### Change RPWM value to = %x for switch clk #####\n",ps_state); */ rtw_write8(Adapter, REG_USB_HRPWM, ps_state); } #endif break; default: ret = SetHwReg8188E(Adapter, variable, val); break; } return ret; } void GetHwReg8188EU(PADAPTER Adapter, u8 variable, u8 *val) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); switch (variable) { default: GetHwReg8188E(Adapter, variable, val); break; } } /* * Description: * Query setting of specified variable. * */ u8 GetHalDefVar8188EUsb( IN PADAPTER Adapter, IN HAL_DEF_VARIABLE eVariable, IN PVOID pValue ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u8 bResult = _SUCCESS; switch (eVariable) { case HW_VAR_MAX_RX_AMPDU_FACTOR: *((u32 *)pValue) = MAX_AMPDU_FACTOR_64K; break; case HAL_DEF_TX_LDPC: case HAL_DEF_RX_LDPC: *((u8 *)pValue) = _FALSE; break; case HAL_DEF_TX_STBC: *((u8 *)pValue) = 0; break; case HAL_DEF_RX_STBC: *((u8 *)pValue) = 1; break; default: bResult = GetHalDefVar8188E(Adapter, eVariable, pValue); break; } return bResult; } /* * Description: * Change default setting of specified variable. * */ u8 SetHalDefVar8188EUsb( IN PADAPTER Adapter, IN HAL_DEF_VARIABLE eVariable, IN PVOID pValue ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u8 bResult = _SUCCESS; switch (eVariable) { default: bResult = SetHalDefVar(Adapter, eVariable, pValue); break; } return bResult; } #if 0 u32 _update_92cu_basic_rate(_adapter *padapter, unsigned int mask) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); #ifdef CONFIG_BT_COEXIST struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); #endif unsigned int BrateCfg = 0; #ifdef CONFIG_BT_COEXIST if ((pbtpriv->BT_Coexist) && (pbtpriv->BT_CoexistType == BT_CSR_BC4)) BrateCfg = mask & 0x151; else #endif { /* if(pHalData->version_id != VERSION_TEST_CHIP_88C) */ BrateCfg = mask & 0x15F; /* else //for 88CU 46PING setting, Disable CCK 2M, 5.5M, Others must tuning */ /* BrateCfg = mask & 0x159; */ } BrateCfg |= 0x01; /* default enable 1M ACK rate */ return BrateCfg; } #endif void _update_response_rate(_adapter *padapter, unsigned int mask) { u8 RateIndex = 0; /* Set RRSR rate table. */ rtw_write8(padapter, REG_RRSR, mask & 0xff); rtw_write8(padapter, REG_RRSR + 1, (mask >> 8) & 0xff); /* Set RTS initial rate */ while (mask > 0x1) { mask = (mask >> 1); RateIndex++; } rtw_write8(padapter, REG_INIRTS_RATE_SEL, RateIndex); } static void rtl8188eu_init_default_value(_adapter *padapter) { PHAL_DATA_TYPE pHalData; struct pwrctrl_priv *pwrctrlpriv; u8 i; pHalData = GET_HAL_DATA(padapter); pwrctrlpriv = adapter_to_pwrctl(padapter); rtl8188e_init_default_value(padapter); /* init default value */ pHalData->fw_ractrl = _FALSE; if (!pwrctrlpriv->bkeepfwalive) pHalData->LastHMEBoxNum = 0; /* init dm default value */ pHalData->bIQKInitialized = _FALSE; pHalData->EfuseHal.fakeEfuseBank = 0; pHalData->EfuseHal.fakeEfuseUsedBytes = 0; _rtw_memset(pHalData->EfuseHal.fakeEfuseContent, 0xFF, EFUSE_MAX_HW_SIZE); _rtw_memset(pHalData->EfuseHal.fakeEfuseInitMap, 0xFF, EFUSE_MAX_MAP_LEN); _rtw_memset(pHalData->EfuseHal.fakeEfuseModifiedMap, 0xFF, EFUSE_MAX_MAP_LEN); } static u8 rtl8188eu_ps_func(PADAPTER Adapter, HAL_INTF_PS_FUNC efunc_id, u8 *val) { u8 bResult = _TRUE; switch (efunc_id) { #if defined(CONFIG_AUTOSUSPEND) && defined(SUPPORT_HW_RFOFF_DETECTED) case HAL_USB_SELECT_SUSPEND: { u8 bfwpoll = *((u8 *)val); /* rtl8188e_set_FwSelectSuspend_cmd(Adapter,bfwpoll ,500); */ /* note fw to support hw power down ping detect */ } break; #endif /* CONFIG_AUTOSUSPEND && SUPPORT_HW_RFOFF_DETECTED */ default: break; } return bResult; } void rtl8188eu_set_hal_ops(_adapter *padapter) { struct hal_ops *pHalFunc = &padapter->hal_func; pHalFunc->hal_power_on = _InitPowerOn_8188EU; pHalFunc->hal_power_off = hal_poweroff_8188eu; pHalFunc->hal_init = &rtl8188eu_hal_init; pHalFunc->hal_deinit = &rtl8188eu_hal_deinit; pHalFunc->inirp_init = &rtl8188eu_inirp_init; pHalFunc->inirp_deinit = &rtl8188eu_inirp_deinit; pHalFunc->init_xmit_priv = &rtl8188eu_init_xmit_priv; pHalFunc->free_xmit_priv = &rtl8188eu_free_xmit_priv; pHalFunc->init_recv_priv = &rtl8188eu_init_recv_priv; pHalFunc->free_recv_priv = &rtl8188eu_free_recv_priv; #ifdef CONFIG_RTW_SW_LED pHalFunc->InitSwLeds = &rtl8188eu_InitSwLeds; pHalFunc->DeInitSwLeds = &rtl8188eu_DeInitSwLeds; #endif/* CONFIG_RTW_SW_LED */ pHalFunc->init_default_value = &rtl8188eu_init_default_value; pHalFunc->intf_chip_configure = &rtl8188eu_interface_configure; pHalFunc->read_adapter_info = &ReadAdapterInfo8188EU; pHalFunc->set_hw_reg_handler = &SetHwReg8188EU; pHalFunc->GetHwRegHandler = &GetHwReg8188EU; pHalFunc->get_hal_def_var_handler = &GetHalDefVar8188EUsb; pHalFunc->SetHalDefVarHandler = &SetHalDefVar8188EUsb; pHalFunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8188E; pHalFunc->hal_xmit = &rtl8188eu_hal_xmit; pHalFunc->mgnt_xmit = &rtl8188eu_mgnt_xmit; pHalFunc->hal_xmitframe_enqueue = &rtl8188eu_hal_xmitframe_enqueue; #ifdef CONFIG_HOSTAPD_MLME pHalFunc->hostap_mgnt_xmit_entry = &rtl8188eu_hostap_mgnt_xmit_entry; #endif pHalFunc->interface_ps_func = &rtl8188eu_ps_func; #ifdef CONFIG_XMIT_THREAD_MODE pHalFunc->xmit_thread_handler = &rtl8188eu_xmit_buf_handler; #endif #ifdef CONFIG_SUPPORT_USB_INT pHalFunc->interrupt_handler = interrupt_handler_8188eu; #endif rtl8188e_set_hal_ops(pHalFunc); }