Files
qlcplus/padcontroller/layer.py
T
jimmyandClaude Opus 5.5 c3fe965e79 Add Circle and Sweep for the movers to the test show.
They fill the movers layer's top row, pads 15 and 16 (notes 98 and 99), in
the Movement solo frame with Wander and Ballyhoo: a circle of about ±45° of
pan and ±21° of tilt, and a straight pan sweep of about ±60°, both mirrored
and relative to the knobs. Knob 13's speed dial gives them a quarter of its
time, 5.5 s a round to start with (scripts/shows/mover_more_efx.py). The pad
controller settles the knobs after them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 01:47:05 +13:00

190 lines
8.4 KiB
Python
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
"""Hold Play to move the bank 2 pads up a layer.
The SMC-PAD sends CC 27 as 127 when Play goes down and 0 when it comes up.
While it is down, pad notes 52–67 go out as 68–83, so QLC+ can tell a
second set of buttons from the first. Play itself is not passed on.
Pause (CC 28) does the same for bank 1, but toggles: each press flips it.
Off, bank 1 pads 36–51 go out as they are, for the cans. On, they go out as
84–99, for the movers. Pause itself is not passed on. The movers are not
sound reactive, so Sound and Threshold (84 and 85) do nothing on their layer.
The Sound pad (note 36) toggles QLC+'s audio triggers, which pump the cans'
Sound submaster in the Dimmers frame. Every press and release also sends CC 100
at full, so switching sound off leaves the cans at full rather than wherever
the music left them.
The Threshold pad (note 37) toggles a second audio trigger, which flashes the
cans to full on bass hits. While it is on, CC 100 is held at 0 so the cans sit
dark between hits; switching it off puts the submaster back to full.
The two are exclusive: turning one on taps the other's note first when it is
on, so QLC+ switches it off.
Knob 6 (CC 35) is the sides' peak. It goes on to the Peak submasters, which
set how bright the Threshold hits, the chases and the strobe flash. While Sound is on,
it also holds both side sliders (knobs 5 and 8, CC 34 and 37) at its value, so
the bass pumps the sides up to it; turns of knobs 5 and 8 meanwhile are kept
and put back when Sound goes off.
pump and threshold follow the two pads' presses, so the pad controller can
light whichever is on. QLC+ sends no feedback for its audio triggers, so they
are only a guess; reopen() clears them, as QLC+ starts with both off.
colours holds the last colour pad pressed in each set, as sent (52–67 for the
cans, 68–83 for the movers), or None once it is pressed again: the colour
buttons toggle in a solo frame. QLC+ does not save which buttons are on, so
reopen() presses them again when QLC+ loads the show.
The movers' Wander, Ballyhoo, Circle and Sweep pads (notes 96–99, pads 13–16 on
the movers layer) each toggle a relative EFX around the Pan and Tilt knobs (9 and
10, CC 38 and 39). They share a solo frame in QLC+, so starting one stops the others.
QLC+ 4.12 leaves an EFX's last offset on the movers when it stops, until those
sliders change, so when the one that is on goes off, settle asks for the two
knobs one step off and then back (nudge() and positions()). Swapping needs
none: the new EFX writes over the old one's offset. moving holds the note whose
EFX is on, from the presses: a guess like pump.
"""
from __future__ import annotations
PLAY_CC = 27
FIRST_NOTE = 52
LAST_NOTE = 67
SHIFT = 16
PAUSE_CC = 28
BANK_1_FIRST = 36
BANK_1_LAST = 51
MOVERS_SHIFT = 48 # bank 1 goes out as 84–99 while Pause is on, above bank 2's held layer
SOUND_NOTE = 36
THRESHOLD_NOTE = 37
SUBMASTER_CC = 100
KNOB_CHANNEL = 0
PEAK_CC = 35 # knob 6
SIDE_CCS = (34, 37) # knobs 5 and 8: Cans 9–15 and Cans 1, 2, 7, 8
RELATIVE_NOTES = (96, 97, 98, 99) # Wander, Ballyhoo, Circle, Sweep: pads 13–16 on the movers layer
POSITION_CCS = (38, 39) # knobs 9 and 10: the movers' Pan and Tilt
class PlayLayer:
def __init__(self) -> None:
self.held = False
self.movers = False # Pause toggles bank 1 between the cans and the movers
# (channel, note as pressed) -> note sent, so a release matches its press
self.sent: dict[tuple[int, int], int] = {}
self.pump = False
self.threshold = False
# Last value of each knob below, from the pad; QLC+ starts them at full.
self.knobs = {cc: 127 for cc in (PEAK_CC, *SIDE_CCS)}
# Pan and Tilt as last sent; QLC+ starts them at 0.
self.position = {cc: 0 for cc in POSITION_CCS}
self.moving: int | None = None
self.settle = False # a relative EFX just went off: the caller sends nudge(), then positions()
# set -> (channel, note sent) of the colour that is on
self.colours: dict[int, tuple[int, int] | None] = {1: None, 2: None}
def handle(self, data: list[int]) -> list[list[int]]:
"""The messages to send on. Empty when the message is swallowed."""
status = data[0]
kind = status & 0xF0
channel = status & 0x0F
if kind == 0xB0 and len(data) >= 3 and data[1] == PLAY_CC:
self.held = data[2] > 0
return []
if kind == 0xB0 and len(data) >= 3 and data[1] == PAUSE_CC:
if data[2] > 0:
self.movers = not self.movers
return []
if kind == 0xB0 and len(data) >= 3 and channel == KNOB_CHANNEL and data[1] in self.knobs:
self.knobs[data[1]] = data[2]
if data[1] == PEAK_CC:
return [list(data), *self.sides()]
return [] if self.pump else [list(data)]
if kind == 0xB0 and len(data) >= 3 and channel == KNOB_CHANNEL and data[1] in self.position:
self.position[data[1]] = data[2]
return [list(data)]
if kind not in (0x80, 0x90) or len(data) < 3:
return [list(data)]
key = (channel, data[1])
is_on = kind == 0x90 and data[2] > 0
if is_on:
out = self.shifted(data[1])
self.sent[key] = out
else:
out = self.sent.pop(key, data[1])
note = out
before: list[list[int]] = []
extra: list[list[int]] = []
if note == SOUND_NOTE:
if is_on:
if self.threshold:
before = tap(channel, THRESHOLD_NOTE)
self.threshold = False
self.pump = not self.pump
extra = self.sides(restore=not self.pump)
# Again on release, after any spectrum frame QLC+ still had queued
extra = [*extra, [0xB0, SUBMASTER_CC, 127]]
elif note == THRESHOLD_NOTE:
if is_on:
if self.pump:
before = tap(channel, SOUND_NOTE)
self.pump = False
extra = self.sides(restore=True)
self.threshold = not self.threshold
extra = [*extra, [0xB0, SUBMASTER_CC, 0 if self.threshold else 127]]
elif note in RELATIVE_NOTES and is_on:
if note == self.moving:
self.moving = None
self.settle = True
else:
self.moving = note
if is_on and FIRST_NOTE <= out <= LAST_NOTE + SHIFT:
colour_set = 1 if out <= LAST_NOTE else 2
pressed = (channel, out)
self.colours[colour_set] = None if self.colours[colour_set] == pressed else pressed
return [*before, [status, out, *data[2:]], *extra]
def shifted(self, note: int) -> int:
"""The note a press goes out as: bank 2 up while Play is held, bank 1 up while Pause is on."""
if self.held and FIRST_NOTE <= note <= LAST_NOTE:
return note + SHIFT
if self.movers and BANK_1_FIRST <= note <= BANK_1_LAST:
return note + MOVERS_SHIFT
return note
def reopen(self) -> list[list[int]]:
"""QLC+ has loaded the show: everything is off. Press the colours that were on.
The Sound submaster goes back to full too, as sound is off.
"""
self.pump = False
self.threshold = False
self.moving = None
out = []
for colour in self.colours.values():
if colour is not None:
out += tap(*colour)
return out + [[0xB0, SUBMASTER_CC, 127]]
def sides(self, restore: bool = False) -> list[list[int]]:
"""The side sliders at the peak while Sound is on, or back at their own knobs."""
if restore:
return [[0xB0 | KNOB_CHANNEL, cc, self.knobs[cc]] for cc in SIDE_CCS]
if not self.pump:
return []
return [[0xB0 | KNOB_CHANNEL, cc, self.knobs[PEAK_CC]] for cc in SIDE_CCS]
def nudge(self) -> list[list[int]]:
"""Pan and Tilt one step off their knobs, so QLC+ writes them again."""
return [[0xB0 | KNOB_CHANNEL, cc, v - 1 if v else 1] for cc, v in self.position.items()]
def positions(self) -> list[list[int]]:
"""Pan and Tilt back at their knobs."""
return [[0xB0 | KNOB_CHANNEL, cc, v] for cc, v in self.position.items()]
def tap(channel: int, note: int) -> list[list[int]]:
"""A press and release of note, to toggle a QLC+ button off."""
return [[0x90 | channel, note, 127], [0x80 | channel, note, 0]]