feat(cli): skip unchanged files using device file_hashes.json

Read and update file_hashes.json on deploy; add --force-upload and tests.

Co-authored-by: Cursor <cursoragent@cursor.com>

Pipfile

@@ -16,5 +16,5 @@ python_version = "3"
 [scripts]
 web = "python web.py"
 cli = "python cli.py"
-build = "pyinstaller --clean led-cli.spec"
+build = "pyinstaller --clean --onefile --name led-cli --paths lib cli.py"
 install = "pipenv install"

README.md

@@ -1,8 +1,41 @@
 # led-tool
-- `-s, --show`: Display current settings from device
-- `--no-download`: Don't download settings first (use empty settings)
-**Default behavior:** Downloads settings and prints them. If any edit flags are provided, settings are modified and uploaded automatically (unless `--no-upload` is specified).
 
-## Device Connection
+CLI helpers for MicroPython LED devices: **`settings.json`** download/upload via **mpremote**, resets, follow/tail, recursive uploads, optional firmware flash, and **led-driver**-oriented flags (presets, transport, Wi-Fi fields).
 
-The tools use an integrated mpremote transport to communicate with MicroPython devices. Make sure your device is connected and accessible via the specified serial port.## LicenseSee LICENSE file for details.
+Connection is always via **`-p` / `--port`** (default `/dev/ttyACM0`). There is **no** separate “server IP” flag; the Pi or PC address is configured on the device in **`settings.json`** when using Wi-Fi mode.
+
+## Common flags
+
+| Flag | Purpose |
+|------|--------|
+| `-p`, `--port` | Serial device (default `/dev/ttyACM0`) |
+| `-s`, `--show` | Print current settings from the device |
+| `-n`, `--name` | Device **name** |
+| `--reset-device-name` | Set **name** to firmware default (`led-` + STA MAC hex, same as `Settings.set_defaults` on led-driver) |
+| `--id` | Numeric device id (ESP-NOW, 0–255) |
+| `--pin` | LED GPIO (`led_pin`) |
+| `-b`, `--brightness` | Brightness 0–255 |
+| `-l`, `--leds` | LED count (`num_leds`) |
+| `-d`, `--debug` | Debug 0 or 1 |
+| `-o`, `--order` | LED colour order (`rgb`, `grb`, …) |
+| `--preset` / `--pattern` | Create or replace a named preset in **led-driver** `presets.json` |
+| `--default` | Startup preset name |
+| `--transport` | `espnow` or `wifi` (`transport_type` on device) |
+| `--ssid`, `--wifi-password`, `--wifi-channel` | Wi-Fi / channel fields for the driver |
+| `-r`, `--reset` | Reset the device |
+| `-f`, `--follow` | Follow serial output (optional timeout seconds) |
+| `--pause` | Sleep N seconds (for chained actions) |
+| `-u`, `--upload` | Recursive upload: `-u SRC [DEST]` (skips unchanged files via `file_hashes.json` on device) |
+| `--src`, `--lib`, `--all` | Deploy led-driver trees to flash root, `patterns/`, and `lib/` |
+| `--force-upload` | Upload every file; ignore `file_hashes.json` |
+| `-e`, `--erase` | Erase everything at device root (including `settings.json` and `presets.json`) |
+| `--rm` | Remove a path on the device |
+| `--flash` | Flash a firmware binary (uses **esptool** on the host) |
+
+**Settings I/O:** With no arguments, **`led-cli`** prints help (no device access). **`--show`** downloads `settings.json` and prints it (read-only). Setting fields (`--name`, `-b`, …) download once, merge, print, and **upload only when a value actually changed**. **`--preset`** alone only touches **`presets.json`** (no `settings.json` download). Ordered actions (`--reset`, `--upload`, `-e`, …) run without touching settings unless you also pass **`--show`** or setting / preset edits as above.
+
+Run **`python cli.py -h`** for the full epilog and argument list.
+
+## License
+
+See **LICENSE** in this directory.

cli.py

@@ -2,8 +2,10 @@
 """
 LED Bar Configuration CLI Tool
 
-Command-line interface for downloading, editing, and uploading settings.json
-to/from MicroPython devices via mpremote.
+Command-line interface for editing settings.json on MicroPython devices via mpremote.
+Settings are downloaded from the device only when displaying (--show) or when applying
+setting changes; uploads occur only when something changed. Use --erase to clear the
+device filesystem (including settings).
 """
 
 import json
@@ -11,11 +13,12 @@ import argparse
 import subprocess
 import sys
 import time
+import shutil
 from typing import Dict, Any, List, Optional
 
 import tempfile
 import os
-from device import copy_file, DeviceConnection
+from device import copy_file, DeviceConnection, firmware_default_device_name
 
 
 def resolve_flash_binary(path: str) -> Optional[str]:
@@ -147,14 +150,14 @@ _FLAGS_WITH_VALUE = frozenset({
     '-p', '--port', '-n', '--name', '--pin', '-b', '--brightness',
     '-l', '--leds', '-d', '-debug', '--debug', '-o', '--order',
     '--preset', '--pattern', '--default', '--transport', '--ssid',
-    '--wifi-password', '--wifi-channel',
+    '--wifi-password', '--wifi-channel', '--src', '--lib', '--patterns', '--paterns',
 })
 
 
 def _get_ordered_actions(argv: List[str]) -> List[tuple]:
     """
     Scan argv and return list of (action_name, value) in order of appearance.
-    Actions: flash, pause, reset, upload, erase_all, rm, follow.
+    Actions: flash, pause, reset, upload, ls, erase_all, rm, follow.
     """
     actions = []
     i = 1
@@ -201,22 +204,51 @@ def _get_ordered_actions(argv: List[str]) -> List[tuple]:
                 i += 2
             else:
                 i += 1
-            # Use empty string as remote_dir to map to root on device
-            actions.append(('upload', [local_dir, ""]))
+            # Upload source tree excluding patterns/ (handled by --patterns).
+            actions.append(('upload_src_no_patterns', local_dir))
             continue
-        if arg == '--lib':
-            # Upload local DIR to /lib on device
-            if i + 1 < len(argv):
+        if arg in ('--patterns', '--paterns'):
+            # Upload local patterns DIR (default: ./src/patterns) to /patterns.
+            local_dir = os.path.join("src", "patterns")
+            if i + 1 < len(argv) and not argv[i + 1].startswith('-'):
                 local_dir = argv[i + 1]
-                actions.append(('upload', [local_dir, "lib"]))
                 i += 2
             else:
-                raise ValueError("--lib requires a directory argument")
+                i += 1
+            actions.append(('upload', [local_dir, "patterns"]))
+            continue
+        if arg == '--all':
+            actions.append(('upload_src_no_patterns', "src"))
+            actions.append(('upload', [os.path.join("src", "patterns"), "patterns"]))
+            actions.append(('upload', ["lib", "lib"]))
+            i += 1
+            continue
+        if arg == '--force-upload':
+            # Handled via argparse; skip during action scan
+            i += 1
+            continue
+        if arg == '--lib':
+            # Upload local DIR (default: ./lib) to /lib on device
+            local_dir = "lib"
+            if i + 1 < len(argv) and not argv[i + 1].startswith('-'):
+                local_dir = argv[i + 1]
+                i += 2
+            else:
+                i += 1
+            actions.append(('upload', [local_dir, "lib"]))
+            continue
+        if arg == '--ls':
+            actions.append(('ls', None))
+            i += 1
             continue
         if arg == '-e':
             actions.append(('erase_all', None))
             i += 1
             continue
+        if arg == '--erase':
+            actions.append(('erase_all', None))
+            i += 1
+            continue
         if arg == '--rm':
             if i + 1 < len(argv):
                 actions.append(('rm', argv[i + 1]))
@@ -253,10 +285,13 @@ def main() -> None:
         formatter_class=argparse.RawDescriptionHelpFormatter,
         epilog="""
 Examples:
-  # Download and print current settings
+  # Show help (no device I/O)
   %(prog)s
 
-  # Download, edit device name and brightness, then upload
+  # Show current settings.json from device (read-only)
+  %(prog)s --show
+
+  # Edit device name and brightness, then upload only if values changed
   %(prog)s -n "LED-Strip-1" -b 128
 
   # Set multiple parameters
@@ -283,6 +318,9 @@ Examples:
 
   # Set name, num_leds, default pattern, and upload
   %(prog)s --name "MyStrip" -l 60 --default rainbow
+
+  # Reset logical device name to firmware default (STA MAC based)
+  %(prog)s --reset-device-name
         """
     )
 
@@ -297,6 +335,12 @@ Examples:
         help="Device name"
     )
 
+    parser.add_argument(
+        "--reset-device-name",
+        action="store_true",
+        help="Set name to firmware default (led-<STA MAC hex>, same as fresh settings.json on led-driver)",
+    )
+
     parser.add_argument(
         "--id",
         dest="device_id",
@@ -429,20 +473,49 @@ Examples:
         nargs="?",
         const="src",
         metavar="DIR",
-        help="Upload DIR recursively to device root (:/, no leading directory). If DIR is omitted, uses local ./src."
+        help="Upload DIR recursively to device root (:/, no leading directory), excluding patterns/. If DIR is omitted, uses local ./src."
     )
 
     parser.add_argument(
         "--lib",
+        nargs="?",
+        const="lib",
         metavar="DIR",
-        help="Upload DIR recursively to /lib on device"
+        help="Upload DIR recursively to /lib on device. If DIR is omitted, uses local ./lib."
     )
 
     parser.add_argument(
-        "-e",
+        "--all",
+        action="store_true",
+        help="Upload ./src (excluding patterns), ./src/patterns, and ./lib."
+    )
+
+    parser.add_argument(
+        "--force-upload",
+        action="store_true",
+        help="Upload every file; ignore file_hashes.json on the device",
+    )
+
+    parser.add_argument(
+        "--patterns", "--paterns",
+        dest="patterns_dir",
+        nargs="?",
+        const=os.path.join("src", "patterns"),
+        metavar="DIR",
+        help="Upload DIR recursively to /patterns on device. If DIR is omitted, uses local ./src/patterns."
+    )
+
+    parser.add_argument(
+        "--ls",
+        action="store_true",
+        help="List files on the device root (:/)"
+    )
+
+    parser.add_argument(
+        "-e", "--erase",
         dest="erase_all",
         action="store_true",
-        help="Erase all code on the device (delete all files except settings.json)"
+        help="Erase the device filesystem: delete all files and directories at device root (including settings.json and presets.json)",
     )
 
     parser.add_argument(
@@ -458,6 +531,9 @@ Examples:
     )
 
     try:
+        if len(sys.argv) <= 1:
+            parser.print_help()
+            return
         args = parser.parse_args()
         ordered_actions = _get_ordered_actions(sys.argv)
     except ValueError as e:
@@ -521,22 +597,73 @@ Examples:
                 else:
                     print(f"Uploading {upload_dir} to device on {port}...", file=sys.stderr)
                 conn = DeviceConnection(port)
-                files_copied, dirs_created = conn.upload_directory(upload_dir, remote_dir)
-                print(f"Upload complete: {files_copied} files, {dirs_created} directories created.", file=sys.stderr)
+                files_copied, dirs_created, files_skipped = conn.upload_directory(
+                    upload_dir, remote_dir, force=args.force_upload
+                )
+                print(
+                    f"Upload complete: {files_copied} uploaded, {files_skipped} skipped, "
+                    f"{dirs_created} directories created.",
+                    file=sys.stderr,
+                )
             except Exception as e:
                 print(f"Error uploading directory: {e}", file=sys.stderr)
                 sys.exit(1)
+        elif action_name == 'upload_src_no_patterns':
+            src_dir = value
+            if not os.path.exists(src_dir):
+                print(f"Error: Directory does not exist: {src_dir}", file=sys.stderr)
+                sys.exit(1)
+            if not os.path.isdir(src_dir):
+                print(f"Error: Not a directory: {src_dir}", file=sys.stderr)
+                sys.exit(1)
+            try:
+                with tempfile.TemporaryDirectory() as temp_src:
+                    for entry in sorted(os.listdir(src_dir)):
+                        if entry == "patterns":
+                            continue
+                        src_entry = os.path.join(src_dir, entry)
+                        dst_entry = os.path.join(temp_src, entry)
+                        if os.path.isdir(src_entry):
+                            shutil.copytree(src_entry, dst_entry)
+                        else:
+                            shutil.copy2(src_entry, dst_entry)
+                    print(
+                        f"Uploading {src_dir} (excluding patterns/) to device root on {port}...",
+                        file=sys.stderr,
+                    )
+                    conn = DeviceConnection(port)
+                    files_copied, dirs_created, files_skipped = conn.upload_directory(
+                        temp_src, "", force=args.force_upload
+                    )
+                    print(
+                        f"Upload complete: {files_copied} uploaded, {files_skipped} skipped, "
+                        f"{dirs_created} directories created.",
+                        file=sys.stderr,
+                    )
+            except Exception as e:
+                print(f"Error uploading src (excluding patterns): {e}", file=sys.stderr)
+                sys.exit(1)
+
+        elif action_name == 'ls':
+            try:
+                print(f"Listing files on device {port}...", file=sys.stderr)
+                conn = DeviceConnection(port)
+                items = conn.list_files('')
+                for name, is_dir, size in items:
+                    marker = "d" if is_dir else "-"
+                    print(f"{marker} {size:>8} {name}")
+            except Exception as e:
+                print(f"Error listing files: {e}", file=sys.stderr)
+                sys.exit(1)
 
         elif action_name == 'erase_all':
             try:
-                print(f"Erasing all code on device {port}...", file=sys.stderr)
+                print(f"Erasing device filesystem on {port}...", file=sys.stderr)
                 conn = DeviceConnection(port)
                 items = conn.list_files('')
                 for name, is_dir, size in items:
-                    if name == "settings.json":
-                        continue
                     conn.delete(name)
-                print("Erase complete.", file=sys.stderr)
+                print("Erase complete (device root is empty).", file=sys.stderr)
             except Exception as e:
                 print(f"Error erasing device: {e}", file=sys.stderr)
                 sys.exit(1)
@@ -569,11 +696,35 @@ Examples:
                 sys.exit(1)
             return  # follow blocks; when interrupted we're done
 
+    default_name_from_device: Optional[str] = None
+    if args.reset_device_name:
+        if args.name is not None:
+            print(
+                "Error: use either --name or --reset-device-name, not both.",
+                file=sys.stderr,
+            )
+            sys.exit(1)
+        try:
+            print(
+                f"Reading firmware default device name (STA MAC) on {port}...",
+                file=sys.stderr,
+            )
+            default_name_from_device = firmware_default_device_name(port)
+            print(
+                f"Default name will be {default_name_from_device!r}.",
+                file=sys.stderr,
+            )
+        except Exception as e:
+            print(f"Error: {e}", file=sys.stderr)
+            sys.exit(1)
+
     # Collect all edit parameters
     edits: Dict[str, Any] = {}
 
     if args.name is not None:
         edits["name"] = args.name
+    elif default_name_from_device is not None:
+        edits["name"] = default_name_from_device
 
     if args.pin is not None:
         edits["led_pin"] = args.pin
@@ -609,32 +760,42 @@ Examples:
         # Clamp into single-byte range; store as int in settings.json
         edits["id"] = max(0, min(255, args.device_id))
 
-    # 1. Download: get current settings from device
+    settings_work = args.show or bool(edits)
+
+    if settings_work:
         try:
             print(f"Downloading settings from {args.port}...", file=sys.stderr)
             settings = download_settings(args.port)
             print("Settings downloaded successfully.", file=sys.stderr)
         except Exception as e:
             if "timeout" in str(e).lower() or "connection" in str(e).lower():
-            print(f"Error: Connection timeout. Check device connection on {args.port}", file=sys.stderr)
+                print(
+                    f"Error: Connection timeout. Check device connection on {args.port}",
+                    file=sys.stderr,
+                )
             else:
                 print(f"Error downloading settings: {e}", file=sys.stderr)
             sys.exit(1)
 
-    # If --show only, print and exit (unless presets or settings are being written)
         if args.show:
             print_settings(settings)
             if not edits and args.preset is None:
                 return
 
-    # 2. Edit: apply edits to downloaded settings
-    if edits:
-        print(f"Applying {len(edits)} edit(s)...", file=sys.stderr)
-        settings.update(edits)
+        changed_edits: Dict[str, Any] = {}
+        for key, value in edits.items():
+            if settings.get(key) != value:
+                changed_edits[key] = value
+
+        if edits and not changed_edits:
+            print("No settings changes detected; skipping settings upload.", file=sys.stderr)
+
+        if changed_edits:
+            print(f"Applying {len(changed_edits)} setting change(s)...", file=sys.stderr)
+            settings.update(changed_edits)
 
         print_settings(settings)
 
-    # 3a. Presets file (led-driver presets.json)
         if args.preset is not None:
             pattern = args.pattern if args.pattern is not None else "on"
             try:
@@ -655,23 +816,62 @@ Examples:
                     print("Device will reset.", file=sys.stderr)
             except Exception as e:
                 if "timeout" in str(e).lower() or "connection" in str(e).lower():
-                print(f"Error: Connection timeout. Check device connection on {args.port}", file=sys.stderr)
+                    print(
+                        f"Error: Connection timeout. Check device connection on {args.port}",
+                        file=sys.stderr,
+                    )
                 else:
                     print(f"Error uploading presets: {e}", file=sys.stderr)
                 sys.exit(1)
 
-    # 3b. Settings upload (resets device)
-    if edits:
+        if changed_edits:
             try:
                 print(f"\nUploading settings to {args.port}...", file=sys.stderr)
                 upload_settings(args.port, settings)
                 print("Settings uploaded successfully. Device will reset.", file=sys.stderr)
             except Exception as e:
                 if "timeout" in str(e).lower() or "connection" in str(e).lower():
-                print(f"Error: Connection timeout. Check device connection on {args.port}", file=sys.stderr)
+                    print(
+                        f"Error: Connection timeout. Check device connection on {args.port}",
+                        file=sys.stderr,
+                    )
                 else:
                     print(f"Error uploading settings: {e}", file=sys.stderr)
                 sys.exit(1)
+        return
+
+    if args.preset is not None:
+        pattern = args.pattern if args.pattern is not None else "on"
+        try:
+            print(f"Downloading presets from {args.port}...", file=sys.stderr)
+            presets_data = download_presets(args.port)
+            entry = presets_data.get(args.preset)
+            if not isinstance(entry, dict):
+                entry = {}
+            entry["p"] = pattern
+            presets_data[args.preset] = entry
+            print(
+                f"Writing preset {args.preset!r} (pattern={pattern}) to {PRESETS_REMOTE}...",
+                file=sys.stderr,
+            )
+            upload_presets(args.port, presets_data, reset=True)
+            print("Presets uploaded successfully.", file=sys.stderr)
+            print("Device will reset.", file=sys.stderr)
+        except Exception as e:
+            if "timeout" in str(e).lower() or "connection" in str(e).lower():
+                print(
+                    f"Error: Connection timeout. Check device connection on {args.port}",
+                    file=sys.stderr,
+                )
+            else:
+                print(f"Error uploading presets: {e}", file=sys.stderr)
+            sys.exit(1)
+        return
+
+    if ordered_actions:
+        return
+
+    parser.print_help()
 
 
 if __name__ == "__main__":

deploy_manifest.py

@@ -0,0 +1,45 @@
+"""
+Host-side helpers for file_hashes.json (same format as led-driver/src/file_hashes.py).
+"""
+
+import hashlib
+import json
+import os
+
+MANIFEST_VERSION = 1
+MANIFEST_FILENAME = "file_hashes.json"
+HASH_ALGO = "sha256"
+
+
+def normalize_remote_path(remote_file: str) -> str:
+    """Device-relative path with forward slashes (no leading slash)."""
+    return remote_file.replace("\\", "/").lstrip("/")
+
+
+def sha256_hex_file(path: str) -> str:
+    h = hashlib.sha256()
+    with open(path, "rb") as f:
+        for chunk in iter(lambda: f.read(65536), b""):
+            h.update(chunk)
+    return h.hexdigest()
+
+
+def parse_manifest(data: bytes) -> dict:
+    """Return path -> hash map from manifest bytes."""
+    try:
+        doc = json.loads(data.decode("utf-8"))
+    except (UnicodeDecodeError, json.JSONDecodeError, TypeError, ValueError):
+        return {}
+    if not isinstance(doc, dict):
+        return {}
+    files = doc.get("files")
+    return dict(files) if isinstance(files, dict) else {}
+
+
+def build_manifest_bytes(files: dict) -> bytes:
+    doc = {
+        "version": MANIFEST_VERSION,
+        "algorithm": HASH_ALGO,
+        "files": files,
+    }
+    return json.dumps(doc, separators=(",", ":")).encode("utf-8")

device.py

@@ -10,6 +10,14 @@ import os
 import time
 import serial
 
+from deploy_manifest import (
+    MANIFEST_FILENAME,
+    build_manifest_bytes,
+    normalize_remote_path,
+    parse_manifest,
+    sha256_hex_file,
+)
+
 # Add lib directory to path - handle both normal execution and PyInstaller bundle
 if getattr(sys, 'frozen', False):
     # Running as a PyInstaller bundle
@@ -23,12 +31,15 @@ if lib_path not in sys.path and os.path.exists(lib_path):
     sys.path.insert(0, lib_path)
 
 from mpremote.transport_serial import SerialTransport
-from mpremote.transport import TransportError
+from mpremote.transport import TransportError, TransportExecError
 
 
 class DeviceConnection:
     """Wrapper for device communication."""
 
+    #: Feed interval during uploads (led-driver uses WDT(timeout=10000) ms).
+    WDT_FEED_INTERVAL_SEC = 5.0
+
     def __init__(self, device):
         """Connect to a device."""
         self.device = device
@@ -54,6 +65,38 @@ class DeviceConnection:
                 pass
             self.transport = None
 
+    def _feed_wdt(self) -> None:
+        """Best-effort feed of the ESP task WDT between chunked FS writes."""
+        if self.transport is None:
+            return
+        try:
+            self.transport.exec(
+                "try:\n import machine\n machine.WDT(timeout=10000).feed()\nexcept Exception:\n pass\n"
+            )
+        except Exception:
+            pass
+
+    def _make_wdt_upload_progress_callback(self):
+        """Progress hook for Transport.fs_writefile: feed WDT every WDT_FEED_INTERVAL_SEC."""
+        last_feed = [time.monotonic()]
+
+        def progress(written: int, total: int) -> None:
+            now = time.monotonic()
+            if now - last_feed[0] >= self.WDT_FEED_INTERVAL_SEC:
+                self._feed_wdt()
+                last_feed[0] = now
+
+        return progress
+
+    def _fs_writefile_with_wdt(self, remote_path: str, data: bytes) -> None:
+        """Write file to device with periodic WDT feeds during long transfers."""
+        self._feed_wdt()
+        self.transport.fs_writefile(
+            remote_path,
+            data,
+            progress_callback=self._make_wdt_upload_progress_callback(),
+        )
+
     def copy_from_device(self, remote_path, local_path):
         """Copy a file from device to local filesystem."""
         self.connect()
@@ -70,17 +113,45 @@ class DeviceConnection:
         try:
             with open(local_path, 'rb') as f:
                 data = f.read()
-            self.transport.fs_writefile(remote_path, data)
+            self._fs_writefile_with_wdt(remote_path, data)
         finally:
             self.disconnect()
 
-    def upload_directory(self, local_dir, remote_dir=None):
+    def _manifest_remote_path(self) -> str:
+        return "/" + MANIFEST_FILENAME
+
+    def read_hash_manifest(self) -> dict:
+        """Load path -> sha256 hex map from file_hashes.json on the device."""
+        remote = self._manifest_remote_path()
+        if not self.transport.fs_exists(remote):
+            return {}
+        try:
+            data = self.transport.fs_readfile(remote)
+            return parse_manifest(data)
+        except Exception:
+            return {}
+
+    def write_hash_manifest(self, files: dict) -> None:
+        """Write merged file_hashes.json to the device root."""
+        self._fs_writefile_with_wdt(
+            self._manifest_remote_path(),
+            build_manifest_bytes(files),
+        )
+    
+    def upload_directory(self, local_dir, remote_dir=None, *, force: bool = False):
         """
         Upload a directory recursively to the device.
         
+        Skips files whose sha256 matches file_hashes.json on the device unless
+        force is True. Updates the manifest after upload.
+        
         Args:
             local_dir: Local directory path to upload
             remote_dir: Remote directory path (default: root, uses basename of local_dir)
+            force: Upload every file even when the manifest hash matches
+        
+        Returns:
+            (files_copied, dirs_created, files_skipped)
         """
         import os
         
@@ -94,15 +165,19 @@ class DeviceConnection:
                 remote_dir = os.path.basename(os.path.abspath(local_dir))
             
             # Ensure remote directory exists
-            if not self.transport.fs_exists(remote_dir):
+            if remote_dir and not self.transport.fs_exists(remote_dir):
                 self.transport.fs_mkdir(remote_dir)
             
+            manifest = {} if force else self.read_hash_manifest()
+            
             # Walk through local directory and copy files
             files_copied = 0
+            files_skipped = 0
             dirs_created = 0
             
             for root, dirs, files in os.walk(local_dir):
-                # Calculate relative path from local_dir
+                # Never upload Python bytecode trees (MicroPython does not use them).
+                dirs[:] = [d for d in dirs if d != "__pycache__"]
                 rel_path = os.path.relpath(root, local_dir)
                 
                 # Build remote path
@@ -121,8 +196,12 @@ class DeviceConnection:
                     self.transport.fs_mkdir(remote_base)
                     dirs_created += 1
                 
-                # Copy files
+                # Copy files (skip bytecode; __pycache__ dirs are pruned above)
                 for file in files:
+                    if file.endswith((".pyc", ".pyo")):
+                        continue
+                    if file == MANIFEST_FILENAME:
+                        continue
                     local_file = os.path.join(root, file)
                     # Handle root directory case properly
                     if remote_base == '/':
@@ -130,13 +209,23 @@ class DeviceConnection:
                     else:
                         remote_file = '/'.join([remote_base, file])
                     
+                    manifest_key = normalize_remote_path(remote_file)
+                    local_hash = sha256_hex_file(local_file)
+                    if not force and manifest.get(manifest_key) == local_hash:
+                        print(f"Skipping (unchanged): {remote_file}", file=sys.stderr)
+                        files_skipped += 1
+                        continue
+                    
                     print(f"Uploading: {remote_file}", file=sys.stderr)
                     with open(local_file, 'rb') as f:
                         data = f.read()
-                    self.transport.fs_writefile(remote_file, data)
+                    self._fs_writefile_with_wdt(remote_file, data)
+                    manifest[manifest_key] = local_hash
                     files_copied += 1
             
-            return files_copied, dirs_created
+            self.write_hash_manifest(manifest)
+            
+            return files_copied, dirs_created, files_skipped
         finally:
             self.disconnect()
     
@@ -235,6 +324,37 @@ class DeviceConnection:
             raise TransportError(f"Failed to follow output: {e}") from e
 
 
+def firmware_default_device_name(device: str) -> str:
+    """
+    Default logical device name on led-driver firmware: led-<sta_mac_hex>,
+    matching Settings.set_defaults() in led-driver/src/settings.py.
+    """
+    conn = DeviceConnection(device)
+    conn.connect()
+    try:
+        code = (
+            "import network, ubinascii\n"
+            "sta = network.WLAN(network.STA_IF)\n"
+            "sta.active(True)\n"
+            "mac = ubinascii.hexlify(sta.config('mac')).decode().lower()\n"
+            "print('led-' + mac)\n"
+        )
+        out = conn.transport.exec(code)
+    except TransportExecError as e:
+        raise RuntimeError(
+            "Could not read STA MAC from device (is this MicroPython with network?): "
+            + (e.error_output or str(e)).strip()
+        ) from e
+    finally:
+        conn.disconnect()
+    text = out.decode("utf-8", errors="replace").strip()
+    for line in reversed(text.splitlines()):
+        line = line.strip()
+        if line.startswith("led-"):
+            return line
+    raise RuntimeError("Device did not return a led-<mac> default name")
+
+
 def copy_file(from_device, device, remote_path, local_path):
     """
     Copy a file to/from device.

install.sh

@@ -10,7 +10,7 @@ pipenv install "$@"
 if [ ! -f "dist/led-cli" ] || [ "cli.py" -nt "dist/led-cli" ] || [ "device.py" -nt "dist/led-cli" ]; then
     echo ""
     echo "Building binary..."
-    pipenv run pyinstaller --clean led-cli.spec
+    pipenv run pyinstaller --clean --onefile --name led-cli --paths lib cli.py
 fi
 
 # Ensure ~/.local/bin exists

tests/test_deploy_manifest.py

@@ -0,0 +1,52 @@
+"""Tests for deploy_manifest helpers (host Python)."""
+
+import json
+import os
+import tempfile
+import unittest
+
+from deploy_manifest import (
+    MANIFEST_FILENAME,
+    build_manifest_bytes,
+    normalize_remote_path,
+    parse_manifest,
+    sha256_hex_file,
+)
+
+
+class DeployManifestTests(unittest.TestCase):
+    def test_normalize_remote_path(self):
+        self.assertEqual(normalize_remote_path("/patterns/chase.py"), "patterns/chase.py")
+        self.assertEqual(normalize_remote_path("main.py"), "main.py")
+
+    def test_round_trip_manifest(self):
+        files = {"main.py": "abc", "patterns/x.py": "def"}
+        blob = build_manifest_bytes(files)
+        parsed = parse_manifest(blob)
+        self.assertEqual(parsed, files)
+        doc = json.loads(blob.decode())
+        self.assertEqual(doc["version"], 1)
+        self.assertEqual(doc["algorithm"], "sha256")
+
+    def test_parse_manifest_invalid(self):
+        self.assertEqual(parse_manifest(b"not json"), {})
+        self.assertEqual(parse_manifest(b'{"files": "nope"}'), {})
+
+    def test_sha256_hex_file(self):
+        with tempfile.NamedTemporaryFile(delete=False) as f:
+            f.write(b"hello")
+            path = f.name
+        try:
+            self.assertEqual(
+                sha256_hex_file(path),
+                "2cf24dba5fb0a30e26e83b2ac5b9e29e1b161e5c1fa7425e73043362938b9824",
+            )
+        finally:
+            os.unlink(path)
+
+    def test_manifest_filename(self):
+        self.assertEqual(MANIFEST_FILENAME, "file_hashes.json")
+
+
+if __name__ == "__main__":
+    unittest.main()