Files
led-driver/managed_components/espressif__mdns/tests/host_test
jimmyandClaude Haiku 5.5 4cd3bc7973 feat: DDP frame sync over UDP broadcast, DDP acks, DDP enable setting
- Driver acks each completed DDP frame; the test waits for the acks before broadcasting the sync.
- Sync listener on UDP 4049: a frame is held until the next sync, then shown.
- DDP pixels are shown at full brightness, ignoring the device brightness settings.
- "DDP and sync receive on" setting (NVS, network API, web UI); off ignores DDP and sync packets.
- ddp_test.py: finds devices on the subnet, drives them in lockstep at a fixed rate, runs animations.
- /api/ddp reports sync counters for diagnosis.
- Includes in-progress WebSocket, multi-driver web UI and Wi-Fi work from the same tree.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 14:10:55 +13:00
..

Setup dummy network interfaces

Note: Set two addresses so we could use one as source and another as destination

sudo ip link add eth2 type dummy
sudo ip addr add 192.168.1.200/24 dev eth2
sudo ip addr add 192.168.1.201/24 dev eth2
sudo ip link set eth2 up
sudo ifconfig eth2 multicast

Dig on a specified interface

dig +short -b 192.168.1.200 -p 5353 @224.0.0.251 myesp.local

or a reverse query:

dig +short -b 192.168.2.200 -p 5353 @224.0.0.251 -x 192.168.1.200

Run avahi to browse services

Avahi needs the netif to have the "multicast" flag set

david@david-comp:~/esp/idf (feature/mdns_networking_socket)$ avahi-browse -a -r -p
+;eth2;IPv6;myesp-service2;Web Site;local
+;eth2;IPv4;myesp-service2;Web Site;local
=;eth2;IPv6;myesp-service2;Web Site;local;myesp.local;192.168.1.200;80;"board=esp32" "u=user" "p=password"
=;eth2;IPv4;myesp-service2;Web Site;local;myesp.local;192.168.1.200;80;"board=esp32" "u=user" "p=password"