led-driver/test/patterns/auto_manual.py

#!/usr/bin/env python3
import utime
from machine import WDT
from settings import Settings
from patterns import Patterns


def run_for(p, wdt, duration_ms):
    """Run pattern for specified duration."""
    start = utime.ticks_ms()
    while utime.ticks_diff(utime.ticks_ms(), start) < duration_ms:
        wdt.feed()
        p.tick()
        utime.sleep_ms(10)


def main():
    s = Settings()
    pin = s.get("led_pin", 10)
    num = s.get("num_leds", 30)

    p = Patterns(pin=pin, num_leds=num)
    wdt = WDT(timeout=10000)
    
    print("=" * 50)
    print("Testing Auto and Manual Modes")
    print("=" * 50)
    
    # Test 1: Rainbow in AUTO mode (continuous)
    print("\nTest 1: Rainbow pattern in AUTO mode (should run continuously)")
    p.edit("rainbow_auto", {
        "pattern": "rainbow",
        "brightness": 128,
        "delay": 50,
        "n1": 2,
        "auto": True
    })
    p.select("rainbow_auto")
    print("Running rainbow_auto for 3 seconds...")
    run_for(p, wdt, 3000)
    print("✓ Auto mode: Pattern ran continuously")
    
    # Test 2: Rainbow in MANUAL mode (one step per tick)
    print("\nTest 2: Rainbow pattern in MANUAL mode (one step per tick)")
    p.edit("rainbow_manual", {
        "pattern": "rainbow",
        "brightness": 128,
        "delay": 50,
        "n1": 2,
        "auto": False
    })
    p.select("rainbow_manual")
    print("Calling tick() 5 times (should advance 5 steps)...")
    for i in range(5):
        p.tick()
        utime.sleep_ms(100)  # Small delay to see changes
        print(f"  Tick {i+1}: generator={'active' if p.generator is not None else 'stopped'}")
    
    # Check if generator stopped after one cycle
    if p.generator is None:
        print("✓ Manual mode: Generator stopped after one step (as expected)")
    else:
        print("⚠ Manual mode: Generator still active (may need multiple ticks)")
    
    # Test 3: Pulse in AUTO mode (continuous cycles)
    print("\nTest 3: Pulse pattern in AUTO mode (should pulse continuously)")
    p.edit("pulse_auto", {
        "pattern": "pulse",
        "brightness": 128,
        "delay": 100,
        "n1": 500,  # Attack
        "n2": 200,  # Hold
        "n3": 500,  # Decay
        "colors": [(255, 0, 0)],
        "auto": True
    })
    p.select("pulse_auto")
    print("Running pulse_auto for 3 seconds...")
    run_for(p, wdt, 3000)
    print("✓ Auto mode: Pulse ran continuously")
    
    # Test 4: Pulse in MANUAL mode (one cycle then stop)
    print("\nTest 4: Pulse pattern in MANUAL mode (one cycle then stop)")
    p.edit("pulse_manual", {
        "pattern": "pulse",
        "brightness": 128,
        "delay": 100,
        "n1": 300,  # Attack
        "n2": 200,  # Hold
        "n3": 300,  # Decay
        "colors": [(0, 255, 0)],
        "auto": False
    })
    p.select("pulse_manual")
    print("Running pulse_manual until generator stops...")
    tick_count = 0
    max_ticks = 200  # Safety limit
    while p.generator is not None and tick_count < max_ticks:
        p.tick()
        tick_count += 1
        utime.sleep_ms(10)
    
    if p.generator is None:
        print(f"✓ Manual mode: Pulse completed one cycle after {tick_count} ticks")
    else:
        print(f"⚠ Manual mode: Pulse still running after {tick_count} ticks")
    
    # Test 5: Transition in AUTO mode (continuous transitions)
    print("\nTest 5: Transition pattern in AUTO mode (continuous transitions)")
    p.edit("transition_auto", {
        "pattern": "transition",
        "brightness": 128,
        "delay": 500,
        "colors": [(255, 0, 0), (0, 255, 0), (0, 0, 255)],
        "auto": True
    })
    p.select("transition_auto")
    print("Running transition_auto for 3 seconds...")
    run_for(p, wdt, 3000)
    print("✓ Auto mode: Transition ran continuously")
    
    # Test 6: Transition in MANUAL mode (one transition then stop)
    print("\nTest 6: Transition pattern in MANUAL mode (one transition then stop)")
    p.edit("transition_manual", {
        "pattern": "transition",
        "brightness": 128,
        "delay": 500,
        "colors": [(255, 0, 0), (0, 255, 0)],
        "auto": False
    })
    p.select("transition_manual")
    print("Running transition_manual until generator stops...")
    tick_count = 0
    max_ticks = 200
    while p.generator is not None and tick_count < max_ticks:
        p.tick()
        tick_count += 1
        utime.sleep_ms(10)
    
    if p.generator is None:
        print(f"✓ Manual mode: Transition completed after {tick_count} ticks")
    else:
        print(f"⚠ Manual mode: Transition still running after {tick_count} ticks")
    
    # Test 7: Switching between auto and manual modes
    print("\nTest 7: Switching between auto and manual modes")
    p.edit("switch_test", {
        "pattern": "rainbow",
        "brightness": 128,
        "delay": 50,
        "n1": 2,
        "auto": True
    })
    p.select("switch_test")
    print("Running in auto mode for 1 second...")
    run_for(p, wdt, 1000)
    
    # Switch to manual mode by editing the preset
    print("Switching to manual mode...")
    p.edit("switch_test", {"auto": False})
    p.select("switch_test")  # Re-select to apply changes
    
    print("Calling tick() 3 times in manual mode...")
    for i in range(3):
        p.tick()
        utime.sleep_ms(100)
        print(f"  Tick {i+1}: generator={'active' if p.generator is not None else 'stopped'}")
    
    # Switch back to auto mode
    print("Switching back to auto mode...")
    p.edit("switch_test", {"auto": True})
    p.select("switch_test")
    print("Running in auto mode for 1 second...")
    run_for(p, wdt, 1000)
    print("✓ Successfully switched between auto and manual modes")
    
    # Cleanup
    print("\nCleaning up...")
    p.edit("cleanup_off", {"pattern": "off"})
    p.select("cleanup_off")
    p.tick()
    utime.sleep_ms(100)
    
    print("\n" + "=" * 50)
    print("All tests completed!")
    print("=" * 50)


if __name__ == "__main__":
    main()