Files
jimmyandClaude Haiku 5.5 9a04d28ecf feat: web UI with AP, Wi-Fi client, mDNS, presets, OTA and DDP
- Wi-Fi access point led-XXXXXX plus a client network, configurable
  mDNS name and static client address
- Preset tiles with an editor, drag to reorder, default presets,
  global brightness, Run and Edit modes, collapsible menu on phones
- 35 patterns ported from led-driver, up to 512 LEDs, colour order,
  max brightness and data pin settings
- Over-the-air updates (POST /ota) with rollback, and a CLI in tools/ota.py
- DDP receiver on UDP 4048 with tools/ddp_test.py
- LED refresh every 10 ms; lwIP sockets raised to 16 so mDNS, HTTP
  and DDP can run together

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 01:54:32 +13:00

81 lines
2.1 KiB
Makefile

# Top-level Makefile for the led_strip ESP-IDF project.
# Thin wrapper around idf.py. Runs on Linux, macOS (bash) and Windows (GNU make with cmd.exe or sh).
#
# Override any variable on the command line, for example:
# make flash PORT=/dev/ttyUSB0 # Linux
# make flash PORT=/dev/cu.usbmodem101 # macOS
# make flash PORT=COM4 # Windows
ifeq ($(OS),Windows_NT)
HOST_OS := windows
HOME_DIR := $(USERPROFILE)
DEFAULT_PORT := COM3
else
HOST_OS := $(shell uname -s)
HOME_DIR := $(HOME)
ifeq ($(HOST_OS),Darwin)
DEFAULT_PORT := /dev/cu.usbmodem101
else
DEFAULT_PORT := /dev/ttyACM0
endif
endif
IDF_PATH ?= $(HOME_DIR)/.espressif/v6.1/esp-idf
IDF_PYTHON_ENV_PATH ?= $(HOME_DIR)/.espressif/python_env/idf6.1_py3.12_env
PORT ?= $(DEFAULT_PORT)
export IDF_PATH
export IDF_PYTHON_ENV_PATH
# Run idf.py in a shell that has sourced ESP-IDF's environment script (sets PATH and toolchains).
ifeq ($(HOST_OS),windows)
define idf
cmd /c "$(subst /,\,$(IDF_PATH))\export.bat && idf.py $(1)"
endef
else
define idf
bash -c '. "$(IDF_PATH)/export.sh" >/dev/null 2>&1 && idf.py $(1)'
endef
endif
.PHONY: all build flash monitor flash-monitor menuconfig clean fullclean help
all: build
build:
$(call idf,build)
flash: build
$(call idf,-p $(PORT) flash)
monitor:
$(call idf,-p $(PORT) monitor)
flash-monitor: build
$(call idf,-p $(PORT) flash monitor)
menuconfig:
$(call idf,menuconfig)
clean:
$(call idf,clean)
fullclean:
$(call idf,fullclean)
help:
@echo Targets:
@echo build Build the firmware
@echo flash Build, then flash to the board on PORT
@echo monitor Open the serial monitor on PORT
@echo flash-monitor Build, flash, then open the serial monitor
@echo menuconfig Open the project configuration menu
@echo clean Remove build outputs
@echo fullclean Delete the build directory entirely
@echo help Show this help
# Over-the-air update over Wi-Fi (the access point or the home network): make ota HOST=<ip or name>
ota: HOST ?= led.local
ota: build
python3 tools/ota.py $(HOST)