- Wi-Fi access point led-XXXXXX plus a client network, configurable
mDNS name and static client address
- Preset tiles with an editor, drag to reorder, default presets,
global brightness, Run and Edit modes, collapsible menu on phones
- 35 patterns ported from led-driver, up to 512 LEDs, colour order,
max brightness and data pin settings
- Over-the-air updates (POST /ota) with rollback, and a CLI in tools/ota.py
- DDP receiver on UDP 4048 with tools/ddp_test.py
- LED refresh every 10 ms; lwIP sockets raised to 16 so mDNS, HTTP
and DDP can run together
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Brings the led_strip example into the cpp app, targeting the ESP32-C3:
- Access point led-XXXXXX (open) plus a Wi-Fi client configured from the
web Settings tab, with credentials stored in NVS and reconnect backoff
- mDNS as led.local with an HTTP service on port 80
- HTTP server with an embedded web UI and a JSON API for patterns and Wi-Fi
- Pattern runner for solid, rainbow, chase, breathe, blink, pulse,
transition and circle on a 119-LED WS2812 strip (GPIO 10)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Adds a minimal ESP-IDF project for ESP32-S3 at the repo root: top-level
CMakeLists, a main component with a C++ app_main that logs a heartbeat,
sdkconfig.defaults selecting esp32s3, and build notes in the README.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Neither the global nor a preset's brightness goes above max_brightness; a
change redraws a static pattern under the new ceiling.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A run of three consecutive indices that all look old means the controller
rebooted and restarted its counter, so resync to it; one or two stray old
frames are still dropped as late copies.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
New espnow_ota module, loaded on the first OTA packet (types 0x07-0x0C,
status reply 0x26). Files are written by chunk index to <path>.new,
checked against their sha256, and moved into place together on commit,
followed by a reset. Unchanged files are skipped, and a repeated commit
after the reset still gets OK.
- receive ESP-NOW frames from esp.irq() so frames are not lost while
presets.tick() runs; polling remains as a fallback
- raise rxbuf to 2048 and the link inbox to 24 frames
- file_hashes: MicroPython's sha256 has no hexdigest()
- bench stats line includes esp.stats()
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On the ESP32-C3 the radio tasks failed to start (Wifi Unknown Error 0x0101)
on about every other cold boot once the link and beat modules were loaded.
Bringing ESP-NOW up before the pattern library and the LED driver claim
memory made 6 of 6 cold boots start cleanly.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adds the driver half of the v2 controller link as extra 0x4C message types:
DATA with fragment reassembly, de-duplication and acks, a state-version
digest with jittered resync requests, a bench echo, and a BEAT frame handled
by BeatSync (accepts one of the two copies, free-runs on the last period
when a beat is missed). Presets.beat() steps the selected pattern without a
message. Optional settings: espnow_loss, bench, beat_pin, usb_log.
The working tree also carries the files already running on the bench device,
which were ahead of origin/p2p: board.py (per-chip LED pin and CPU speed),
the reversed device_config flag in controller_messages.py, and the
apply_cpu_freq call in main.py.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Apply group membership on RX, accept select as [preset_id, step?],
and fix identify/off plus presets layout for manual beat stepping.
Co-authored-by: Cursor <cursoragent@cursor.com>
Use init_espnow for channel alignment; route wire CMD/GROUPS and JSON
v1 payloads to process_data from the poll loop.
Co-authored-by: Cursor <cursoragent@cursor.com>
Binary espnow_wire/espnow_transport modules plus a minimal main that
broadcasts a JSON hello and polls ESP-NOW while running presets.
Co-authored-by: Cursor <cursoragent@cursor.com>
Consolidate legacy pattern ids into meteor, particles, sparkle, chase,
and colour_cycle with n6/mode style selection; add pattern_modes helper,
self-contained tests/all.py, and preset mode alias on wire.
Co-authored-by: Cursor <cursoragent@cursor.com>
Align pattern background rendering to use preset.background_or(...) and update pulse/radiate single-step behaviour to preserve visible frames and step progression.
Replace sleep-based timing in pattern generators with non-blocking tick checks so long delays do not block the main loop and risk watchdog resets.
Co-authored-by: Cursor <cursoragent@cursor.com>
Wire controller messages through new modules (background tasks, runtime state,
startup) and add binary envelope handling.
Co-authored-by: Cursor <cursoragent@cursor.com>