DDP frames still skip the device and master brightness, since the sender
sets the colours, but they are now scaled by max_brightness instead of
being shown at a fixed full 255.
ddp_test expects the same scale.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- 19 new patterns for the 2 x 8 rig with the data-in heads in the middle (rig sweep, ripple, scanner,
checker...) and 9 2D ones (diagonal sweep and bounce, radar, spiral, diamonds, corners, plasma, bounce, rain)
- --interactive: pick patterns by number or name while streaming; --fps=N
- hard brightness cap in packet(): no byte over 25% (63) can leave the script
- async sending, one DDP packet per bar, one new frame per tick so the pattern and sender clocks don't beat
- the LSY1 sync goes out a tick after its frames and the streaming modes no longer wait for acks;
the full test still does
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
- Driver acks each completed DDP frame; the test waits for the acks before broadcasting the sync.
- Sync listener on UDP 4049: a frame is held until the next sync, then shown.
- DDP pixels are shown at full brightness, ignoring the device brightness settings.
- "DDP and sync receive on" setting (NVS, network API, web UI); off ignores DDP and sync packets.
- ddp_test.py: finds devices on the subnet, drives them in lockstep at a fixed rate, runs animations.
- /api/ddp reports sync counters for diagnosis.
- Includes in-progress WebSocket, multi-driver web UI and Wi-Fi work from the same tree.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- With no arguments, probe the local /24 for devices answering /api/ddp and test each one
(--subnet picks another subnet; named hosts still override discovery).
- Test all devices at the same time, one thread each.
- Add chase, rainbow and breathe animations; check the last frame of each is shown.
- Compare readback against the output scale (global x master x max brightness) the
firmware applies, read from /api/status and /api/hardware.
- Check the out-of-range packet and the timeout fallback against the last frame shown.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Wi-Fi access point led-XXXXXX plus a client network, configurable
mDNS name and static client address
- Preset tiles with an editor, drag to reorder, default presets,
global brightness, Run and Edit modes, collapsible menu on phones
- 35 patterns ported from led-driver, up to 512 LEDs, colour order,
max brightness and data pin settings
- Over-the-air updates (POST /ota) with rollback, and a CLI in tools/ota.py
- DDP receiver on UDP 4048 with tools/ddp_test.py
- LED refresh every 10 ms; lwIP sockets raised to 16 so mDNS, HTTP
and DDP can run together
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>