Commit Graph
3 Commits
Author SHA1 Message Date
jimmyandClaude Haiku 5.5 4cd3bc7973 feat: DDP frame sync over UDP broadcast, DDP acks, DDP enable setting
- Driver acks each completed DDP frame; the test waits for the acks before broadcasting the sync.
- Sync listener on UDP 4049: a frame is held until the next sync, then shown.
- DDP pixels are shown at full brightness, ignoring the device brightness settings.
- "DDP and sync receive on" setting (NVS, network API, web UI); off ignores DDP and sync packets.
- ddp_test.py: finds devices on the subnet, drives them in lockstep at a fixed rate, runs animations.
- /api/ddp reports sync counters for diagnosis.
- Includes in-progress WebSocket, multi-driver web UI and Wi-Fi work from the same tree.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 14:10:55 +13:00
jimmyandClaude Haiku 5.5 47f4eba0d6 test: DDP test finds every device on the subnet and runs animations
- With no arguments, probe the local /24 for devices answering /api/ddp and test each one
  (--subnet picks another subnet; named hosts still override discovery).
- Test all devices at the same time, one thread each.
- Add chase, rainbow and breathe animations; check the last frame of each is shown.
- Compare readback against the output scale (global x master x max brightness) the
  firmware applies, read from /api/status and /api/hardware.
- Check the out-of-range packet and the timeout fallback against the last frame shown.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 12:57:14 +13:00
jimmyandClaude Haiku 5.5 9a04d28ecf feat: web UI with AP, Wi-Fi client, mDNS, presets, OTA and DDP
- Wi-Fi access point led-XXXXXX plus a client network, configurable
  mDNS name and static client address
- Preset tiles with an editor, drag to reorder, default presets,
  global brightness, Run and Edit modes, collapsible menu on phones
- 35 patterns ported from led-driver, up to 512 LEDs, colour order,
  max brightness and data pin settings
- Over-the-air updates (POST /ota) with rollback, and a CLI in tools/ota.py
- DDP receiver on UDP 4048 with tools/ddp_test.py
- LED refresh every 10 ms; lwIP sockets raised to 16 so mDNS, HTTP
  and DDP can run together

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 01:54:32 +13:00