- Driver acks each completed DDP frame; the test waits for the acks before broadcasting the sync.
- Sync listener on UDP 4049: a frame is held until the next sync, then shown.
- DDP pixels are shown at full brightness, ignoring the device brightness settings.
- "DDP and sync receive on" setting (NVS, network API, web UI); off ignores DDP and sync packets.
- ddp_test.py: finds devices on the subnet, drives them in lockstep at a fixed rate, runs animations.
- /api/ddp reports sync counters for diagnosis.
- Includes in-progress WebSocket, multi-driver web UI and Wi-Fi work from the same tree.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- With no arguments, probe the local /24 for devices answering /api/ddp and test each one
(--subnet picks another subnet; named hosts still override discovery).
- Test all devices at the same time, one thread each.
- Add chase, rainbow and breathe animations; check the last frame of each is shown.
- Compare readback against the output scale (global x master x max brightness) the
firmware applies, read from /api/status and /api/hardware.
- Check the out-of-range packet and the timeout fallback against the last frame shown.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
- Wi-Fi access point led-XXXXXX plus a client network, configurable
mDNS name and static client address
- Preset tiles with an editor, drag to reorder, default presets,
global brightness, Run and Edit modes, collapsible menu on phones
- 35 patterns ported from led-driver, up to 512 LEDs, colour order,
max brightness and data pin settings
- Over-the-air updates (POST /ota) with rollback, and a CLI in tools/ota.py
- DDP receiver on UDP 4048 with tools/ddp_test.py
- LED refresh every 10 ms; lwIP sockets raised to 16 so mDNS, HTTP
and DDP can run together
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>