feat: DDP frame sync over UDP broadcast, DDP acks, DDP enable setting

- Driver acks each completed DDP frame; the test waits for the acks before broadcasting the sync.
- Sync listener on UDP 4049: a frame is held until the next sync, then shown.
- DDP pixels are shown at full brightness, ignoring the device brightness settings.
- "DDP and sync receive on" setting (NVS, network API, web UI); off ignores DDP and sync packets.
- ddp_test.py: finds devices on the subnet, drives them in lockstep at a fixed rate, runs animations.
- /api/ddp reports sync counters for diagnosis.
- Includes in-progress WebSocket, multi-driver web UI and Wi-Fi work from the same tree.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
This commit is contained in:
jimmyandClaude Haiku 5.5 committed 2026-11-11 14:10:55 +13:00
1 parent 47f4eba0d6
commit 4cd3bc7973
294 files changed
+48954 -301

No files matched your search

+5 -1
View File
@@ -9,6 +9,10 @@
#include "esp_err.h"
#define DDP_PORT 4048
#define DDP_SYNC_PORT 4049 // UDP broadcast sync: "LSY1" + seq (u32, big endian)
/** @brief Start listening for DDP packets. */
/** @brief Start listening for DDP packets and sync broadcasts. Off if the saved setting is off. */
esp_err_t ddp_start(void);
/** @brief Turn DDP pixels and sync reception on or off. Packets are ignored while off. */
void ddp_set_enabled(bool on);