test: DDP test finds every device on the subnet and runs animations
- With no arguments, probe the local /24 for devices answering /api/ddp and test each one (--subnet picks another subnet; named hosts still override discovery). - Test all devices at the same time, one thread each. - Add chase, rainbow and breathe animations; check the last frame of each is shown. - Compare readback against the output scale (global x master x max brightness) the firmware applies, read from /api/status and /api/hardware. - Check the out-of-range packet and the timeout fallback against the last frame shown. Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
d32f3d69cf
commit
47f4eba0d6
1 file changed
+157
-35
+157
-35
@@ -4,12 +4,18 @@ Test the LED driver's DDP receiver (UDP port 4048).
|
||||
|
||||
Sends frames of RGB pixels the way a DDP controller does: a version 1 header, the pixel data split
|
||||
across two packets, and the PUSH flag on the last packet of a frame. Then checks through the driver's
|
||||
HTTP API that the pixels were shown, and that the pattern comes back once the pixels stop.
|
||||
HTTP API that the pixels were shown, runs a few test animations, and that the pattern comes back once
|
||||
the pixels stop. Every device is tested at the same time, one thread each.
|
||||
|
||||
python3 tools/ddp_test.py 192.168.4.1
|
||||
python3 tools/ddp_test.py # finds every device on this machine's subnet (/24)
|
||||
python3 tools/ddp_test.py --subnet=192.168.4 # or pick the subnet
|
||||
python3 tools/ddp_test.py led1.local led2.local # or name hosts explicitly
|
||||
python3 tools/ddp_test.py led1.local --serial=/dev/ttyACM0 # also check the serial log (one host only)
|
||||
"""
|
||||
|
||||
import colorsys
|
||||
import json
|
||||
import math
|
||||
import re
|
||||
import socket
|
||||
import struct
|
||||
@@ -17,12 +23,14 @@ import sys
|
||||
import threading
|
||||
import time
|
||||
import urllib.request
|
||||
from concurrent.futures import ThreadPoolExecutor
|
||||
|
||||
PORT = 4048
|
||||
LEDS = 119
|
||||
PUSH = 0x01
|
||||
VER1 = 0x40
|
||||
RGB = 0x01
|
||||
ANIM_FRAMES = 40 # about 1 s at 40 fps
|
||||
|
||||
|
||||
def packet(seq, offset, data, push):
|
||||
@@ -61,21 +69,113 @@ def get(host, path):
|
||||
return json.loads(r.read().decode())
|
||||
|
||||
|
||||
def main():
|
||||
args = [a for a in sys.argv[1:] if not a.startswith("--")]
|
||||
serial_port = next((a.split("=", 1)[1] for a in sys.argv[1:] if a.startswith("--serial=")), None)
|
||||
host = args[0] if args else "192.168.4.1"
|
||||
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
|
||||
def local_prefix():
|
||||
"""The first three octets of this machine's IPv4 address (assumes a /24 subnet)."""
|
||||
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
|
||||
try:
|
||||
s.connect(("8.8.8.8", 80))
|
||||
ip = s.getsockname()[0]
|
||||
finally:
|
||||
s.close()
|
||||
return ip.rsplit(".", 1)[0]
|
||||
|
||||
|
||||
def find_devices(prefix):
|
||||
"""Every host on the subnet that answers the driver's /api/ddp endpoint."""
|
||||
|
||||
def probe(ip):
|
||||
try:
|
||||
with urllib.request.urlopen(f"http://{ip}/api/ddp", timeout=1) as r:
|
||||
json.loads(r.read().decode())
|
||||
return ip
|
||||
except Exception:
|
||||
return None
|
||||
|
||||
ips = [f"{prefix}.{i}" for i in range(1, 255)]
|
||||
with ThreadPoolExecutor(64) as pool:
|
||||
return [ip for ip in pool.map(probe, ips) if ip]
|
||||
|
||||
|
||||
# Test animations: each maps (LED index, frame number) to an RGB colour
|
||||
def anim_chase(i, k):
|
||||
return (255, 160, 0) if (i - 2 * k) % LEDS < 6 else (0, 0, 0)
|
||||
|
||||
|
||||
def anim_rainbow(i, k):
|
||||
r, g, b = colorsys.hsv_to_rgb(((i * 3 + k * 5) % 256) / 256, 1, 1)
|
||||
return (int(r * 255), int(g * 255), int(b * 255))
|
||||
|
||||
|
||||
def anim_breathe(i, k):
|
||||
v = int(127.5 * (1 - math.cos(k / 6)))
|
||||
return (v, v, v)
|
||||
|
||||
|
||||
ANIMATIONS = {"chase": anim_chase, "rainbow": anim_rainbow, "breathe": anim_breathe}
|
||||
|
||||
|
||||
def output_scale(host):
|
||||
"""The factor the driver applies to every pixel before it is shown: global x master x max brightness,
|
||||
with the same integer steps as the firmware (patterns.cpp)."""
|
||||
st = get(host, "/api/status")
|
||||
hw = get(host, "/api/hardware")
|
||||
return st["global_brightness"] * st["master_brightness"] // 255 * hw["max_brightness"] // 255
|
||||
|
||||
|
||||
def expected(pixels, scale):
|
||||
"""What the driver shows for a pixel: each channel scaled by the output factor."""
|
||||
return [[c * scale // 255 for c in px] for px in pixels]
|
||||
|
||||
|
||||
def mismatch_detail(bad):
|
||||
return "" if not bad else f"first mismatch LED {bad[0][0]}: got {bad[0][1]} want {bad[0][2]}"
|
||||
|
||||
|
||||
def verify_frame(host, sock, pixels, scale):
|
||||
"""Read every LED back while keeping the frame on the strip (the readback is slower than the DDP
|
||||
timeout). Returns the LEDs that do not match what the driver should show."""
|
||||
want_all = expected(pixels, scale)
|
||||
stop = threading.Event()
|
||||
|
||||
def keep_sending():
|
||||
seq = 100
|
||||
while not stop.is_set():
|
||||
send_frame(sock, host, pixels, seq)
|
||||
seq += 1
|
||||
time.sleep(0.025)
|
||||
|
||||
sender = threading.Thread(target=keep_sending, daemon=True)
|
||||
sender.start()
|
||||
bad = []
|
||||
for i in range(LEDS):
|
||||
got = get(host, f"/api/ddp?led={i}")["rgb"]
|
||||
want = want_all[i]
|
||||
if got != want:
|
||||
bad.append((i, got, want))
|
||||
stop.set()
|
||||
sender.join()
|
||||
return bad
|
||||
|
||||
|
||||
def run(host, serial_port):
|
||||
"""Run every check against one device. Returns (failures, output lines)."""
|
||||
out = []
|
||||
failures = 0
|
||||
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
|
||||
|
||||
def log(line=""):
|
||||
out.append(line)
|
||||
|
||||
def check(name, ok, detail=""):
|
||||
nonlocal failures
|
||||
print(("PASS " if ok else "FAIL ") + name + (f" {detail}" if detail else ""))
|
||||
log(("PASS " if ok else "FAIL ") + name + (f" {detail}" if detail else ""))
|
||||
if not ok:
|
||||
failures += 1
|
||||
|
||||
before = get(host, "/api/ddp")
|
||||
print(f"before: active={before['active']} packets={before['packets']}")
|
||||
log(f"before: active={before['active']} packets={before['packets']}")
|
||||
scale = output_scale(host)
|
||||
log(f"output scale: {scale}/255")
|
||||
|
||||
# A frame: LED i is a colour that depends on i, so every LED is distinguishable
|
||||
def frame(k):
|
||||
@@ -100,28 +200,9 @@ def main():
|
||||
check("packets counted", mid["packets"] - before["packets"] >= 120,
|
||||
f"+{mid['packets'] - before['packets']}")
|
||||
|
||||
# Keep sending the last frame while reading back: the readback takes longer than the DDP timeout
|
||||
stop = threading.Event()
|
||||
|
||||
def keep_sending():
|
||||
seq = 100
|
||||
while not stop.is_set():
|
||||
send_frame(sock, host, last, seq)
|
||||
seq += 1
|
||||
time.sleep(0.025)
|
||||
|
||||
sender = threading.Thread(target=keep_sending, daemon=True)
|
||||
sender.start()
|
||||
bad = []
|
||||
for i in range(LEDS):
|
||||
got = get(host, f"/api/ddp?led={i}")["rgb"]
|
||||
want = list(last[i])
|
||||
if got != want:
|
||||
bad.append((i, got, want))
|
||||
stop.set()
|
||||
sender.join()
|
||||
check(f"all {LEDS} LEDs show the frame", not bad,
|
||||
"" if not bad else f"first mismatch LED {bad[0][0]}: got {bad[0][1]} want {bad[0][2]}")
|
||||
bad = verify_frame(host, sock, last, scale)
|
||||
check(f"all {LEDS} LEDs show the frame", not bad, mismatch_detail(bad))
|
||||
shown = last
|
||||
|
||||
if reader is not None:
|
||||
reader.join()
|
||||
@@ -140,19 +221,60 @@ def main():
|
||||
[int(m.group(i)) for i in (5, 6, 7)] == list(sent[-1]),
|
||||
f"led0 {m.group(2, 3, 4)} led_last {m.group(5, 6, 7)}")
|
||||
|
||||
# Test animations: send each one, then check the last frame is shown
|
||||
for name, fn in ANIMATIONS.items():
|
||||
pixels = None
|
||||
for k in range(ANIM_FRAMES):
|
||||
pixels = [fn(i, k) for i in range(LEDS)]
|
||||
send_frame(sock, host, pixels, k)
|
||||
time.sleep(0.025)
|
||||
time.sleep(0.2)
|
||||
bad = verify_frame(host, sock, pixels, scale)
|
||||
check(f"animation {name} shows its last frame", not bad, mismatch_detail(bad))
|
||||
shown = pixels
|
||||
|
||||
# Pixels past the strip end are ignored and don't break the rest
|
||||
sock.sendto(packet(0, LEDS * 3 + 30, b"\xff" * 30, True), (host, PORT))
|
||||
time.sleep(0.1)
|
||||
check("out-of-range packet ignored", get(host, "/api/ddp?led=0")["rgb"] == list(last[0]))
|
||||
check("out-of-range packet ignored", get(host, "/api/ddp?led=0")["rgb"] == expected([shown[0]], scale)[0])
|
||||
|
||||
# Stop sending: the pattern should come back after the timeout
|
||||
time.sleep(3.0)
|
||||
after = get(host, "/api/ddp")
|
||||
check("inactive after pixels stop", not after["active"])
|
||||
shown = get(host, "/api/ddp?led=0")["rgb"]
|
||||
check("pattern is shown again", shown != list(last[0]), f"LED 0 now {shown}")
|
||||
now_led0 = get(host, "/api/ddp?led=0")["rgb"]
|
||||
check("pattern is shown again", now_led0 != expected([shown[0]], scale)[0], f"LED 0 now {now_led0}")
|
||||
|
||||
print("\nRESULT:", "all passed" if not failures else f"{failures} failed")
|
||||
return failures, out
|
||||
|
||||
|
||||
def main():
|
||||
args = [a for a in sys.argv[1:] if not a.startswith("--")]
|
||||
serial_port = next((a.split("=", 1)[1] for a in sys.argv[1:] if a.startswith("--serial=")), None)
|
||||
subnet = next((a.split("=", 1)[1] for a in sys.argv[1:] if a.startswith("--subnet=")), None)
|
||||
if args:
|
||||
hosts = args
|
||||
else:
|
||||
prefix = subnet or local_prefix()
|
||||
hosts = find_devices(prefix)
|
||||
print(f"found {len(hosts)} device(s) on {prefix}.0/24: {', '.join(hosts) or 'none'}\n")
|
||||
if not hosts:
|
||||
sys.exit(1)
|
||||
if serial_port and len(hosts) > 1:
|
||||
print("note: --serial is only used when testing one device\n")
|
||||
serial_port = None
|
||||
|
||||
# All devices at the same time, one thread each
|
||||
with ThreadPoolExecutor(max_workers=len(hosts)) as pool:
|
||||
results = list(pool.map(lambda h: run(h, serial_port), hosts))
|
||||
|
||||
failures = 0
|
||||
for host, (device_failures, out) in zip(hosts, results):
|
||||
print(f"== {host}")
|
||||
print("\n".join(out))
|
||||
print()
|
||||
failures += device_failures
|
||||
print("RESULT:", "all passed" if not failures else f"{failures} failed")
|
||||
sys.exit(1 if failures else 0)
|
||||
|
||||
|
||||
|
||||
Reference in new issue
Block a user