menu "mDNS"

    config MDNS_MAX_INTERFACES
        int "Max number of interfaces"
        range 1 9
        default 3
        help
            Number of network interfaces to be served by the mDNS library.
            Lowering this number helps to reduce some static RAM usage.

    config MDNS_MAX_SERVICES
        int "Max number of services"
        default 10
        help
            Services take up a certain amount of memory, and allowing fewer
            services to be open at the same time conserves memory. Specify
            the maximum amount of services here.

    config MDNS_TASK_PRIORITY
        int "mDNS task priority"
        range 1 255
        default 1
        help
            Allows setting mDNS task priority. Please do not set the task priority
            higher than priorities of system tasks. Compile time warning/error
            would be emitted if the chosen task priority were too high.

    config MDNS_ACTION_QUEUE_LEN
        int "Maximum actions pending to the server"
        range 8 64
        default 16
        help
            Allows setting the length of mDNS action queue.

    config MDNS_TASK_STACK_SIZE
        int "mDNS task stack size"
        default 4096
        help
            Allows setting mDNS task stacksize.

    choice MDNS_TASK_AFFINITY
        prompt "mDNS task affinity"
        default MDNS_TASK_AFFINITY_CPU0
        help
            Allows setting mDNS tasks affinity, i.e. whether the task is pinned to
            CPU0, pinned to CPU1, or allowed to run on any CPU.

        config MDNS_TASK_AFFINITY_NO_AFFINITY
            bool "No affinity"
        config MDNS_TASK_AFFINITY_CPU0
            bool "CPU0"
        config MDNS_TASK_AFFINITY_CPU1
            bool "CPU1"
            depends on !FREERTOS_UNICORE

    endchoice

    config MDNS_TASK_AFFINITY
        hex
        default FREERTOS_NO_AFFINITY if MDNS_TASK_AFFINITY_NO_AFFINITY
        default 0x0 if MDNS_TASK_AFFINITY_CPU0
        default 0x1 if MDNS_TASK_AFFINITY_CPU1

    menu "MDNS Memory Configuration"

        choice MDNS_TASK_MEMORY_ALLOC_FROM
            prompt "Select mDNS task create on which type of memory"
            default MDNS_TASK_CREATE_FROM_INTERNAL
            config MDNS_TASK_CREATE_FROM_SPIRAM
                bool "mDNS task creates on the SPIRAM (READ HELP)"
                depends on (SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC)
                help
                    mDNS task creates on the SPIRAM.
                    This option requires FreeRTOS component to allow creating
                    tasks on the external memory.
                    Please read the documentation about FREERTOS_TASK_CREATE_ALLOW_EXT_MEM

            config MDNS_TASK_CREATE_FROM_INTERNAL
                bool "mDNS task creates on the internal RAM"

        endchoice

        choice MDNS_MEMORY_ALLOC_FROM
            prompt "Select mDNS memory allocation type"
            default MDNS_MEMORY_ALLOC_INTERNAL

            config MDNS_MEMORY_ALLOC_SPIRAM
                bool "Allocate mDNS memory from SPIRAM"
                depends on (SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC)

            config MDNS_MEMORY_ALLOC_INTERNAL
                bool "Allocate mDNS memory from internal RAM"

        endchoice

        config MDNS_MEMORY_CUSTOM_IMPL
            bool "Implement custom memory functions"
            default n
            help
                Enable to implement custom memory functions for mDNS library.
                This option is useful when the application wants to use custom
                memory allocation functions for mDNS library.

    endmenu # MDNS Memory Configuration

    config MDNS_SERVICE_ADD_TIMEOUT_MS
        int "mDNS adding service timeout (ms)"
        range 10 30000
        default 2000
        help
            Configures timeout for adding a new mDNS service. Adding a service
            fails if could not be completed within this time.

    config MDNS_TIMER_PERIOD_MS
        int "mDNS timer period (ms)"
        range 10 10000
        default 100
        help
            Configures period of mDNS timer, which periodically transmits packets
            and schedules mDNS searches.

    config MDNS_NETWORKING_SOCKET
        bool "Use BSD sockets for mDNS networking"
        default n
        help
            Enables optional mDNS networking implementation using BSD sockets
            in UDP multicast mode.
            This option creates a new thread to serve receiving packets (TODO).
            This option uses additional N sockets, where N is number of interfaces.

    config MDNS_SKIP_SUPPRESSING_OWN_QUERIES
        bool "Skip suppressing our own packets"
        default n
        help
            Enable only if the querier and the responder share the same IP address.
            This usually happens in test mode, where we may run multiple instances of
            responders/queriers on the same interface.

    config MDNS_ENABLE_DEBUG_PRINTS
        bool "Enable debug prints of mDNS packets"
        default n
        help
            Enable for the library to log received and sent mDNS packets to stdout.

    config MDNS_DEBUG_USE_ESP_LOG
        bool "Route debug prints to ESP_LOG"
        depends on MDNS_ENABLE_DEBUG_PRINTS
        default y
        help
            Enable this option to route debug prints to ESP_LOG, which allows more flexibility.

    config MDNS_DEBUG_BUFFER_SIZE
        int "Size of temporary buffer for debug prints"
        depends on MDNS_DEBUG_USE_ESP_LOG
        default 1024
        help
            This buffer is used to output mDNS packets in debug prints.

    config MDNS_ENABLE_CONSOLE_CLI
        bool "Enable Command Line Interface on device console"
        default y
        help
            Enable for the console cli to be available on the device.
            When disabled, mdns does not depend on the console component at all.
            With the IDF build system v1 the console component has to be part
            of the build when this is enabled; projects that trim the component
            list (COMPONENTS, EXCLUDE_COMPONENTS or MINIMAL_BUILD) need to
            include it or disable this option. With build system v2 mdns
            requires console itself when this is enabled.

    config MDNS_ENABLE_BROWSE
        bool "Enable mDNS browse (daemon service discovery)"
        default y
        help
            Enable continuous browse APIs (mdns_browse_new / mdns_browse_delete)
            and the related receive/send paths. Disable to save ~3–4 KB of flash
            when the application only advertises services or uses one-shot queries.

    config MDNS_RESPOND_REVERSE_QUERIES
        bool "Enable responding to IPv4 reverse queries"
        default n
        help
            Enables support for IPv4 reverse lookup. If enabled, the mDNS library
            response to PTR queries of "A.B.C.D.in-addr.arpa" type.

    config MDNS_MULTIPLE_INSTANCE
        bool "Multiple instances under the same service type"
        default y
        help
            Enables adding multiple service instances under the same service type.

    menu "MDNS Predefined interfaces"

        config MDNS_PREDEF_NETIF_STA
            bool "Use predefined interface for WiFi Station"
            default y
            help
                Set up mDNS for the default WiFi station.
                Disable this option if you do not need mDNS on default WiFi STA.

        config MDNS_PREDEF_NETIF_AP
            bool "Use predefined interface for WiFi Access Point"
            default y
            help
                Set up mDNS for the default WiFi Access Point.
                Disable this option if you do not need mDNS on default WiFi AP.

        config MDNS_PREDEF_NETIF_ETH
            bool "Use predefined interface for Ethernet"
            depends on ETH_ENABLED
            default y
            help
                Set up mDNS for the default Ethernet interface.
                Disable this option if you do not need mDNS on default Ethernet.

    endmenu # MDNS Predefined interfaces

endmenu
