Jimmy
f7beac2095
Ship UDP RGB panel firmware (eight WS2812 strips) and drop the ESP32 Wi-Fi/MicroPython stack. Co-authored-by: Cursor <cursoragent@cursor.com>
122 lines
3.1 KiB
C
122 lines
3.1 KiB
C
/**
|
||
* W5500 SPI port for portal panel adapter (SPI1, GP9–13).
|
||
* Derived from WIZnet-PICO-C port/ioLibrary_Driver (BSD-3-Clause).
|
||
*/
|
||
|
||
#include <stdio.h>
|
||
|
||
#include "board_config.h"
|
||
#include "wizchip_conf.h"
|
||
#include "wizchip_spi.h"
|
||
|
||
#include "hardware/gpio.h"
|
||
#include "hardware/spi.h"
|
||
#include "pico/binary_info.h"
|
||
#include "pico/critical_section.h"
|
||
#include "pico/stdlib.h"
|
||
|
||
static critical_section_t g_wizchip_cri_sec;
|
||
|
||
static inline void wizchip_select(void) {
|
||
gpio_put(PIN_CS, 0);
|
||
}
|
||
|
||
static inline void wizchip_deselect(void) {
|
||
gpio_put(PIN_CS, 1);
|
||
}
|
||
|
||
static uint8_t wizchip_read(void) {
|
||
uint8_t rx = 0;
|
||
uint8_t tx = 0xff;
|
||
spi_read_blocking(SPI_PORT, tx, &rx, 1);
|
||
return rx;
|
||
}
|
||
|
||
static void wizchip_write(uint8_t tx) {
|
||
spi_write_blocking(SPI_PORT, &tx, 1);
|
||
}
|
||
|
||
static void wizchip_critical_section_lock(void) {
|
||
critical_section_enter_blocking(&g_wizchip_cri_sec);
|
||
}
|
||
|
||
static void wizchip_critical_section_unlock(void) {
|
||
critical_section_exit(&g_wizchip_cri_sec);
|
||
}
|
||
|
||
void wizchip_reset(void) {
|
||
gpio_init(PIN_RST);
|
||
gpio_set_dir(PIN_RST, GPIO_OUT);
|
||
gpio_put(PIN_RST, 0);
|
||
sleep_ms(100);
|
||
gpio_put(PIN_RST, 1);
|
||
sleep_ms(100);
|
||
bi_decl(bi_1pin_with_name(PIN_RST, "W5500 RESET"));
|
||
}
|
||
|
||
void wizchip_spi_initialize(void) {
|
||
spi_init(SPI_PORT, SPI_CLK_MHZ * 1000 * 1000);
|
||
|
||
gpio_set_function(PIN_SCK, GPIO_FUNC_SPI);
|
||
gpio_set_function(PIN_MOSI, GPIO_FUNC_SPI);
|
||
gpio_set_function(PIN_MISO, GPIO_FUNC_SPI);
|
||
|
||
bi_decl(bi_3pins_with_func(PIN_MISO, PIN_MOSI, PIN_SCK, GPIO_FUNC_SPI));
|
||
|
||
gpio_init(PIN_CS);
|
||
gpio_set_dir(PIN_CS, GPIO_OUT);
|
||
gpio_put(PIN_CS, 1);
|
||
bi_decl(bi_1pin_with_name(PIN_CS, "W5500 CS"));
|
||
}
|
||
|
||
void wizchip_cris_initialize(void) {
|
||
critical_section_init(&g_wizchip_cri_sec);
|
||
reg_wizchip_cris_cbfunc(wizchip_critical_section_lock, wizchip_critical_section_unlock);
|
||
}
|
||
|
||
void wizchip_initialize(void) {
|
||
wizchip_deselect();
|
||
reg_wizchip_cs_cbfunc(wizchip_select, wizchip_deselect);
|
||
reg_wizchip_spi_cbfunc(wizchip_read, wizchip_write);
|
||
|
||
uint8_t memsize[2][8] = {
|
||
{2, 2, 2, 2, 2, 2, 2, 2},
|
||
{2, 2, 2, 2, 2, 2, 2, 2},
|
||
};
|
||
|
||
if (ctlwizchip(CW_INIT_WIZCHIP, (void *)memsize) == -1) {
|
||
printf("W5500 init failed\n");
|
||
return;
|
||
}
|
||
|
||
uint8_t link = PHY_LINK_OFF;
|
||
do {
|
||
if (ctlwizchip(CW_GET_PHYLINK, (void *)&link) == -1) {
|
||
printf("PHY link unknown\n");
|
||
return;
|
||
}
|
||
} while (link == PHY_LINK_OFF);
|
||
}
|
||
|
||
void wizchip_check(void) {
|
||
if (getVERSIONR() != 0x04) {
|
||
printf("W5500 version mismatch: 0x%02x\n", getVERSIONR());
|
||
while (1) {
|
||
tight_loop_contents();
|
||
}
|
||
}
|
||
}
|
||
|
||
void network_initialize(wiz_NetInfo net_info) {
|
||
ctlnetwork(CN_SET_NETINFO, (void *)&net_info);
|
||
}
|
||
|
||
void print_network_information(wiz_NetInfo net_info) {
|
||
ctlnetwork(CN_GET_NETINFO, (void *)&net_info);
|
||
printf("MAC %02X:%02X:%02X:%02X:%02X:%02X\n",
|
||
net_info.mac[0], net_info.mac[1], net_info.mac[2],
|
||
net_info.mac[3], net_info.mac[4], net_info.mac[5]);
|
||
printf("IP %d.%d.%d.%d\n",
|
||
net_info.ip[0], net_info.ip[1], net_info.ip[2], net_info.ip[3]);
|
||
}
|