menu "W5500 config" config W5500_SPI_HOST int "SPI host number (1=SPI2, 2=SPI3)" range 1 2 default 1 config W5500_SPI_CLOCK_MHZ int "SPI clock speed (MHz)" range 5 80 default 20 config W5500_SCLK_GPIO int "SCLK GPIO (XIAO D8)" default 7 config W5500_MISO_GPIO int "MISO GPIO (XIAO D9)" default 8 config W5500_MOSI_GPIO int "MOSI GPIO (XIAO D10)" default 9 config W5500_CS_GPIO int "CS GPIO (XIAO D1)" default 2 config W5500_INT_GPIO int "INT GPIO (XIAO D2), -1 to poll" default 3 config W5500_POLL_PERIOD_MS int "RX poll period (ms) when INT is -1" default 10 config W5500_RST_GPIO int "RST GPIO (XIAO D0), -1 if not wired" default 1 endmenu menu "INMP441 mic config" config MIC_SCK_GPIO int "SCK GPIO (XIAO D4)" default 5 config MIC_WS_GPIO int "WS GPIO (XIAO D5)" default 6 config MIC_SD_GPIO int "SD GPIO (XIAO D6)" default 43 config MIC_STREAM_GAIN int "Digital gain for the audio stream (x)" range 1 256 default 16 help The INMP441 is quiet at full scale; x16 (+24 dB) makes speech audible without clipping at normal distances. endmenu menu "Beat detection config" config BEAT_LED_GPIO int "Beat LED GPIO (XIAO user LED is 21), -1 for none" default 21 config BEAT_LED_ACTIVE_LOW bool "Beat LED lights when the pin is low" default y config BEAT_LED_PULSE_MS int "Beat LED flash length (ms)" range 10 500 default 60 config BEAT_LED_DOWNBEAT_MS int "Beat LED flash length on the first beat of a bar (ms)" range 10 1000 default 200 config BEAT_GATE_DBFS int "Ignore audio quieter than this (dBFS, before stream gain)" range -100 -20 default -75 help The INMP441 self-noise is about -87 dBFS. Background music in a room can sit around -65 dBFS, so keep this well below that. config BEAT_LEAD_MS int "Fire predicted beats this early (ms)" range 0 200 default 30 help Beats are predicted from the tempo, so they can be sent early to cancel the ~30 ms of capture and analysis latency. Raise it to cover output latency too (e.g. network or lights). endmenu menu "ESP-NOW config" config ESPNOW_CHANNEL int "Wi-Fi channel shared with the LED drivers" range 1 13 default 6 config BEAT_TX_COPIES int "Copies sent of every beat frame" range 1 4 default 2 help Each beat is broadcast this many times with the same beat index. Drivers act on the first copy that arrives and drop the rest. config BEAT_TX_GAP_US int "Gap between beat copies (us)" range 500 10000 default 2000 config BEAT_TEST_GPIO int "GPIO toggled on every beat sent (-1 = off)" range -1 48 default -1 help For latency measurement: a logic analyzer or scope on this pin and on the driver's beat pin shows the true master-to-LED delay. config BULK_HOLDOFF_US int "Hold bulk traffic back after a beat (us)" range 0 20000 default 3000 endmenu