# led-controller ESP32-S3 controller for LED drivers: W5500 Ethernet, web UI, I2S microphone beat detection and an ESP-NOW link to the drivers. The firmware is C (ESP-IDF) at the repository root; see [`docs/BENCH_TEST.md`](docs/BENCH_TEST.md) for the bench tests. ## Build and flash ```bash make build # minify the web UI from web/, then build the firmware (ESP-IDF in Docker) make flash # flash over USB make ota HOST= # update firmware (web UI included) over Ethernet, no USB (POST /ota) make monitor # serial console make test # driver unit tests and the C/Python envelope cross-check ``` `make` lists every target. The web UI sources are in `web/` (`static/`, `templates/`, `audio.html`). ## Other directories - `led-driver/` (submodule): MicroPython firmware for the ESP32 LED drivers. - `led-tool/` (submodule): `led-cli`, configures drivers over serial and updates the controller over Ethernet (`led-cli --ota HOST`). - `led-simulator/` (submodule), `espnow-sender/`: test helpers. - `db/`: stored zones, presets and devices, importable with `PUT /db/`. ## Docs - API reference: `docs/API.md` - User guide: `docs/help.md` (`scripts/build_help_pdf.sh` regenerates `docs/help.pdf`) - Specification: `docs/SPECIFICATION.md` ## Network The controller advertises `.local` over mDNS (default `led-controller`, plus an `_http._tcp` service). Both settings below come from `/settings` and apply on reboot. `static_ips` is a list of networks to try, in order, each time the Ethernet link comes up. The first entry whose gateway answers ARP is used; if none does (or the list is empty) the controller uses DHCP. `netmask` defaults to `255.255.255.0`, `dns` to the gateway. ```bash curl -X PUT http://led-controller.local/settings/settings -H 'Content-Type: application/json' -d '{ "hostname": "stage", "static_ips": [ {"ip": "192.168.1.50", "netmask": "255.255.255.0", "gw": "192.168.1.1"}, {"ip": "10.0.0.50", "netmask": "255.255.255.0", "gw": "10.0.0.1"} ]}' ```