Author SHA1 Message Date
jimmyandClaude Opus 5.5 a5a7fc575f feat(engine): Pi-side animation engine with protocol outputs and sequencer
Add src/engine, modelled on technicalkiwi/portal's player and sequence runner:

- Pixel generator: runs the unchanged led-driver patterns under CPython
  (utime shim + NeoPixel-like buffer) on a per-zone render thread and
  streams frames to pixel outputs, with keepalive for static frames.
- Output drivers: DDP, Art-Net (ArtDMX/ArtSync), sACN/E1.31, USB-DMX
  (Enttec Pro / Open DMX), plus an ESP32 preset output that reuses the
  existing preset + select delivery path. Registry in db/output.json,
  CRUD and test pattern at /outputs.
- Sequencer: timed preset chains per zone (portal step shape), deadline
  scheduling, loop/repeat, resume after restart; legacy sequence records
  are migrated. Zone play/stop, sequence and scene play/stop endpoints.
- CLI (python -m engine.cli), Outputs and Sequences modals, preset tiles
  drive pixel outputs, API/README docs, engine test suite.

ESP32 firmware is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 13:24:14 +13:00
piandCursor 827eb97203 feat(settings): server global brightness and Wi-Fi driver resync
- Serve GET /settings as JSON by removing duplicate HTML route (use /settings/page for the standalone UI).

- Save global_brightness via PUT; broadcast to connected drivers; push saved level when outbound WS connects.

- Zones UI loads brightness from GET /settings only (no localStorage).

- Bump led-driver submodule for settings.save on brightness with save flag.

- Extend API doc and endpoint tests for global_brightness.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 22:15:30 +12:00
piandCursor 3cca0cffc5 chore: bump led-tool and led-driver submodules
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 21:27:32 +12:00
piandCursor d36828bde2 feat(ui): persist header brightness slider in localStorage
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 21:27:31 +12:00
piandCursor ed0048c795 chore(service): avoid network-online stall and speed pipenv boot
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 21:27:31 +12:00
piandCursor b316edbaf9 fix(wifi): stagger driver ws dials and extend initial retry window
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 21:27:31 +12:00
jimmyandCursor c1b0c41ef2 fix(transport): disable UART ESP-NOW bridge by default
Require serial_enabled true in settings to open serial_port; default false in
set_defaults for Wi-Fi-only and dev machines.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 15:07:16 +12:00
jimmyandCursor 3bb75d49de feat(util): add binary envelope packing and message helpers
Includes tests for v1/v2 envelope round-trips.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:37 +12:00
jimmyandCursor 3d77cb448a chore: add vertical stand OpenSCAD model
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:35 +12:00
jimmyandCursor 49383c0003 feat(espnow): add espnow-sender utility
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:35 +12:00
jimmyandCursor 7d821b9c1c chore(db): add local preset fixtures
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:35 +12:00
jimmyandCursor 9b7e387ea6 chore(scripts): add dev-run helper
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:34 +12:00
jimmyandCursor b4f0d1891e chore(submodule): bump led-driver and led-tool; register led-simulator
led-simulator was already a gitlink; add the missing .gitmodules entry.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:30 +12:00
jimmy 0da30b6d6b fix(submodule): update led-tool pointer to existing commit 2026-04-30 23:28:39 +12:00
jimmy 6cbb728d9a feat(patterns): add new pattern suite and improve mobile controls
Add a broad set of LED patterns with metadata/tests and update zone/profile preset seeding, while refining mobile/desktop UI behavior for scrolling, brightness controls, and bulk pattern sending.
2026-04-23 20:07:55 +12:00
jimmy ff92451a76 feat(profiles): seed twinkle preset defaults
Made-with: Cursor
2026-04-21 20:43:25 +12:00
jimmy 60485bc06a feat(ui): add clear device presets action
Made-with: Cursor
2026-04-21 00:44:38 +12:00
jimmy f6f299c3e5 feat(presets): add radiate pattern defaults
Made-with: Cursor
2026-04-20 23:38:02 +12:00
jimmy 66485f5c59 chore(led-driver): bump submodule for patterns and tests
Made-with: Cursor
2026-04-19 23:28:22 +12:00
jimmy 5f9ff9bcc9 style(ui): presets patterns and layout tweaks
Made-with: Cursor
2026-04-19 23:28:08 +12:00
jimmy 35730b36f0 feat(api): improve pattern deploy and device tcp handling
Made-with: Cursor
2026-04-19 23:28:01 +12:00
jimmy d516833cc3 feat(profiles): seed colour cycle flicker and flame presets
Made-with: Cursor
2026-04-19 23:27:57 +12:00
jimmy 220be64dec feat(db): add flicker flame presets and pattern metadata
Made-with: Cursor
2026-04-19 23:27:49 +12:00
jimmy b433477c64 chore(db): trim device registry
Made-with: Cursor
2026-04-19 23:27:37 +12:00
jimmy 43b7047c57 chore(submodule): bump led-tool for cli upload flags
Made-with: Cursor
2026-04-15 00:46:40 +12:00
jimmy 167417d1ec feat(ui): add web led-tool usb controls
Made-with: Cursor
2026-04-15 00:46:31 +12:00
jimmy fb8141b320 fix(server): close http listener cleanly on shutdown 2026-04-15 00:00:23 +12:00
jimmy 96712dda88 feat(controller): migrate wifi drivers from tcp to websocket clients 2026-04-14 23:13:26 +12:00
jimmy f5a7b42e7c fix(rules): revert unintended submodule changes 2026-04-14 21:54:02 +12:00
jimmy 1b1e9d727e chore(rules): enforce strict user-scoped changes 2026-04-14 21:50:55 +12:00
jimmy 668d29b786 chore(test): move pytest defaults to pyproject.toml
Made-with: Cursor
2026-04-12 02:39:39 +12:00
jimmy e5f42e099e chore: remove esp32 firmware tree and dev mpremote helper
Made-with: Cursor
2026-04-12 02:39:37 +12:00
jimmy a9edda38ef test(browser): fixture, env host and pacing, safer colour inputs
Made-with: Cursor
2026-04-12 02:34:46 +12:00
jimmy edec5ff460 chore(git): ignore pytest cache and ropeproject
Made-with: Cursor
2026-04-12 02:34:44 +12:00
pi 264eb7296f test: fix zone_ctl fixture, pattern assertions, and browser cleanup
Made-with: Cursor
2026-04-12 00:27:43 +12:00
pi fbd4295302 feat(ui): patterns list and create form layout
Made-with: Cursor
2026-04-12 00:13:58 +12:00
pi 7bdb324ebc feat(patterns): driver_patterns helper, on/off ota guard, drop duplicate py tree
Made-with: Cursor
2026-04-12 00:13:56 +12:00
pi 28b19b5219 docs: zones, transports, pattern ota, and submodule readmes
Made-with: Cursor
2026-04-12 00:13:54 +12:00
pi 75ddd559c9 chore(db,led-tool): sync device/zone data and led-tool submodule
Made-with: Cursor
2026-04-11 15:20:26 +12:00
pi 5a1067263a chore: add pattern samples, http driver helpers, OTA/UDP test tools
- patterns/: sample dynamic pattern modules for OTA
- esp32/msg.json: example bridge message shape
- models/http_driver.py, wifi_peer.py: Wi-Fi driver HTTP poll helpers
- tests: pattern OTA send script and UDP discovery echo server
- Submodule led-driver: http_poll and test utilities

Made-with: Cursor
2026-04-11 15:19:15 +12:00
pi e67de6215a feat(patterns,api): pattern OTA, graceful shutdown, driver delivery updates
- Pattern controller/UI and presets patterns tab for OTA to Wi-Fi drivers
- Device controller extensions; driver_delivery chunk handling
- main: SIGINT/SIGTERM shutdown, TCP/UDP server close coordination
- Submodule led-driver: Wi-Fi default transport, lazy espnow import, dynamic patterns

Made-with: Cursor
2026-04-11 15:10:23 +12:00
pi 7179b6531e feat(controller): udp hello discovery and remove tcp registration
Made-with: Cursor
2026-04-06 21:28:13 +12:00
pi fd618d7714 feat(zones): rename tabs to zones across api, ui, and storage
Made-with: Cursor
2026-04-06 18:22:03 +12:00
pi d1ffb857c8 feat(ui): devices tcp status, tabs send, preset websocket hooks
Made-with: Cursor
2026-04-06 00:22:00 +12:00
pi f8eba0ee7e feat(api): tcp driver registry, identify, preset push delivery
- Track Wi-Fi TCP clients, liveness pings, disconnect broadcast, bind errors via gather\n- Device list/get include connected; POST identify with __identify preset\n- Presets push/send delivery helpers; bump led-driver hello type

Made-with: Cursor
2026-04-06 00:21:57 +12:00
pi e6b5bf2cf1 feat(devices): wifi tcp registry, device API/UI, tests; bump led-tool
Made-with: Cursor
2026-04-05 21:13:07 +12:00
pi fbae75b957 chore(cursor): add scoped-fixes rule for minimal changes
Made-with: Cursor
2026-04-05 21:13:03 +12:00
pi 93476655fc test: add tcp mock server with bind conflict hints
Made-with: Cursor
2026-04-05 16:41:23 +12:00
pi 09a87b79d2 docs(ui): update help assets and regenerate help pdf 2026-03-26 00:40:40 +13:00
pi ec39df00fc feat(settings/espnow): validate wifi_channel and wire into firmware 2026-03-26 00:40:21 +13:00
pi 43d494bcb9 fix(api): prevent circular reference in pattern create 2026-03-26 00:40:08 +13:00
pi fed312a397 fix(test/endpoints): add pytest coverage for all Microdot routes 2026-03-26 00:39:41 +13:00
181 changed files with 14759 additions and 3008 deletions

No files matched your search

+45
View File
@@ -0,0 +1,45 @@
---
description: led-driver — MicroPython ESP32: mpremote, imports, layout, I/O, no pycache in src
globs: led-driver/**
alwaysApply: false
---
# led-driver (MicroPython / ESP32)
## Device and tests
1. Validate **MicroPython behaviour** under **`led-driver/`** with **`mpremote connect <PORT> …`** on the chip. Host **`python3`** does **not** prove the firmware build.
2. **Execution target is fixed:** treat **`led-driver/`** code as firmware that runs **only on MicroPython ESP32 devices**. Do **not** run `led-driver/src/main.py` (or other firmware modules) with host CPython as a normal execution path.
3. **Flow:** `mpremote connect <PORT> cp <local> :<on-flash>` then `run <script>.py`. Inline commands only — no **`.sh`** wrappers unless the user asks. Default serial placeholder: **`/dev/ttyACM0`**.
4. Checks that **import and run** code from **`led-driver/src/`** belong in **`led-driver/tests/`** and run with **`mpremote run …`**. **Do not** add **`pytest`** under **`led-controller/tests/`** that **`sys.path`**-loads **`led-driver/src`** and runs those modules on CPython.
## Import layout
4. **No** **`sys.path.insert`**, **`__file__`** path stitching, or other import-path hacks under **`led-driver/`**. Use device flash search path, or host **`PYTHONPATH`** / layout you control.
5. **No** “import fixer” code — fix copy order, flash paths, or env instead.
## Imports (fail loudly)
6. If a dependency does not load, **crash** and fix deployment or filesystem. **Do not** catch **`ImportError`** / **`ModuleNotFoundError`** around **`import`** / **`from … import`** for app/firmware modules (`settings`, `utils`, `network`, `machine`, …).
7. **Allowed — stdlib name pairs only** (MicroPython vs CPython): one **`except ImportError`**, then **one** fallback import, **no** extra logic in **`except`**:
- `uos` → `os`
- `ubinascii` → `binascii`
- `utime` → `time`
Not for “maybe the file exists on flash” — only different **stdlib** names.
8. **No** large inline reimplementations after **`except ImportError`** — deploy the real module.
## I/O
9. Non-blocking **recv** / **accept**: use plain **`except OSError:`** (or **break** on empty). **No** errno / EAGAIN / EWOULDBLOCK tables or **`getattr(errno, …)`** unless fixing a **documented** target bug.
10. Minimal **`try` / `except OSError`** around optional socket options (e.g. **`SO_REUSEADDR`**) is fine.
## Host Python and `src/`
11. **Do not** leave **`__pycache__/`** or **`.pyc`** under **`led-driver/src/`** from host runs. Remove if created; **`.gitignore`** already ignores it. Prefer **`PYTHONDONTWRITEBYTECODE=1`** or **`-B`** when host Python must touch **`led-driver/src/`**.
+12
View File
@@ -0,0 +1,12 @@
---
description: Require test pattern, pattern metadata, and test preset for new patterns
alwaysApply: true
---
# Pattern workflow requirements
1. When creating a new pattern under `led-driver/src/patterns/`, also add/update a corresponding test file in `led-driver/tests/patterns/`.
2. When adding a new pattern, ensure led-controller has `db/pattern.json`; if it does not exist, create it. Add the new pattern metadata and parameter mappings there.
3. When adding a new pattern, add at least one test preset entry in `db/preset.json` in led-controller that uses the new pattern.
+18
View File
@@ -0,0 +1,18 @@
---
description: Fix only the issue or task the user gave; no refactors unless requested
alwaysApply: true
---
# Scoped fixes (no overscoping)
1. **Change only what is needed** to satisfy the user’s *current* request (bug, error, feature, or explicit follow-up). Prefer the smallest diff that fixes it.
2. **Refactors:** Do **not** refactor (restructure, rename, extract functions, change abstractions, or “make it nicer”) **unless the user explicitly asked for a refactor**. A bug fix may touch nearby lines only as much as required to correct the bug.
3. **Do not** rename, reformat, or “clean up” unrelated code; do not add extra error handling, logging, or features you were not asked for.
4. **Related issues:** If you spot other problems (missing functions, wrong types elsewhere, style), you may **mention them in prose** — do **not** fix them unless the user explicitly asks.
5. **Tests and docs:** Add or change tests or documentation **only** when the user asked for them or they are strictly required to verify the requested fix.
6. **Multiple distinct fixes:** If the user reported one error (e.g. a single `TypeError`), fix **that** cause first. Offer to tackle follow-ups separately rather than bundling.
+16
View File
@@ -0,0 +1,16 @@
---
description: enforce strict user-scoped changes only
alwaysApply: true
---
# Strict User Scope
1. Only implement exactly what the user asked for in the current message.
2. Do not add extra refactors, cleanups, renames, architecture changes, or behavioural changes unless the user explicitly asked for them.
3. If a potential improvement is noticed, mention it briefly and ask before changing code.
4. For revert/undo requests, perform the narrowest possible revert and do not modify anything else.
5. Keep edits minimal and local to the requested area.
+6
View File
@@ -1,5 +1,7 @@
# Python # Python
__pycache__/ __pycache__/
# led-driver/src is MicroPython source — never keep host __pycache__ there (see .cursor/rules/led-driver.mdc)
led-driver/src/__pycache__/
*.py[cod] *.py[cod]
*$py.class *$py.class
*.so *.so
@@ -23,7 +25,11 @@ ENV/
Thumbs.db Thumbs.db
# Project specific # Project specific
scripts/.led-controller-venv
docs/.help-print.html
settings.json settings.json
*.log *.log
*.db *.db
*.sqlite *.sqlite
.pytest_cache/
.ropeproject/
+3
View File
@@ -4,3 +4,6 @@
[submodule "led-tool"] [submodule "led-tool"]
path = led-tool path = led-tool
url = git@git.technical.kiwi:technicalkiwi/led-tool.git url = git@git.technical.kiwi:technicalkiwi/led-tool.git
[submodule "led-simulator"]
path = led-simulator
url = git@git.technical.kiwi:technicalkiwi/led-simulator.git
+4 -1
View File
@@ -13,11 +13,13 @@ requests = "*"
selenium = "*" selenium = "*"
adafruit-ampy = "*" adafruit-ampy = "*"
microdot = "*" microdot = "*"
websockets = "*"
[dev-packages] [dev-packages]
pytest = "*"
[requires] [requires]
python_version = "3.12" python_version = "3.11"
[scripts] [scripts]
web = "python /home/pi/led-controller/tests/web.py" web = "python /home/pi/led-controller/tests/web.py"
@@ -25,3 +27,4 @@ watch = "python -m watchfiles 'python tests/web.py' src tests"
install = "pipenv install" install = "pipenv install"
run = "sh -c 'cd src && python main.py'" run = "sh -c 'cd src && python main.py'"
dev = "watchfiles \"sh -c 'cd src && python main.py'\" src" dev = "watchfiles \"sh -c 'cd src && python main.py'\" src"
help-pdf = "sh scripts/build_help_pdf.sh"
Generated
+436 -311
View File
@@ -1,11 +1,11 @@
{ {
"_meta": { "_meta": {
"hash": { "hash": {
"sha256": "12b64c3bf5857d958f790f2416072408e2244631242ba2598210d89df330e184" "sha256": "98da2012e549e7b62ed49a5e1717acaf535b71e8df61bf4108d25b9023be612e"
}, },
"pipfile-spec": 6, "pipfile-spec": 6,
"requires": { "requires": {
"python_version": "3.12" "python_version": "3.11"
}, },
"sources": [ "sources": [
{ {
@@ -26,128 +26,128 @@
}, },
"anyio": { "anyio": {
"hashes": [ "hashes": [
"sha256:41cfcc3a4c85d3f05c932da7c26d0201ac36f72abd4435ba90d0464a3ffed703", "sha256:08b310f9e24a9594186fd75b4f73f4a4152069e3853f1ed8bfbf58369f4ad708",
"sha256:d405828884fc140aa80a3c667b8beed277f1dfedec42ba031bd6ac3db606ab6c" "sha256:334b70e641fd2221c1505b3890c69882fe4a2df910cba14d97019b90b24439dc"
], ],
"markers": "python_version >= '3.9'", "markers": "python_version >= '3.10'",
"version": "==4.12.1" "version": "==4.13.0"
}, },
"attrs": { "attrs": {
"hashes": [ "hashes": [
"sha256:16d5969b87f0859ef33a48b35d55ac1be6e42ae49d5e853b597db70c35c57e11", "sha256:c647aa4a12dfbad9333ca4e71fe62ddc36f4e63b2d260a37a8b83d2f043ac309",
"sha256:adcf7e2a1fb3b36ac48d97835bb6d8ade15b8dcce26aba8bf1d14847b57a3373" "sha256:d03ceb89cb322a8fd706d4fb91940737b6642aa36998fe130a9bc96c985eff32"
], ],
"markers": "python_version >= '3.9'", "markers": "python_version >= '3.9'",
"version": "==25.4.0" "version": "==26.1.0"
}, },
"bitarray": { "bitarray": {
"hashes": [ "hashes": [
"sha256:004d518fa410e6da43386d20e07b576a41eb417ac67abf9f30fa75e125697199", "sha256:0256d57e294414bfe4fec4f852fd1d9ae361228c71b082332bf81c8b8fc69f80",
"sha256:014df8a9430276862392ac5d471697de042367996c49f32d0008585d2c60755a", "sha256:03fe327549f177040b32f7faa736dc152be936d8b264d8b84f94c75f1379bfa1",
"sha256:01c5f0dc080b0ebb432f7a68ee1e88a76bd34f6d89c9568fcec65fb16ed71f0e", "sha256:07626f76a248fce5ebbb10fb0d4899d3c7f908ba21cb2fb4f5a7a9daf24c20cd",
"sha256:025d133bf4ca8cf75f904eeb8ea946228d7c043231866143f31946a6f4dd0bf3", "sha256:0793c51d3b1c7410bde1f7254fff71fabff1bc0cdeba1fa51319ac4e7931df3d",
"sha256:0ca70ccf789446a6dfde40b482ec21d28067172cd1f8efd50d5548159fccad9e", "sha256:0a33f8931ac91ebc23ce4decb99ed8fdddba2bafd2af3bb2781bcfd9878d4822",
"sha256:0df69d26f21a9d2f1b20266f6737fa43f08aa5015c99900fb69f255fbe4dabb4", "sha256:0a661f3492462e7adf8a054fb7414a22fc8251f1e18b9d8cbcf008d2dc85f012",
"sha256:0f8069a807a3e6e3c361ce302ece4bf1c3b49962c1726d1d56587e8f48682861", "sha256:0c8c66f5d8055cb84ad0ea14af57b3579cb0b6db589f2086f5e33f0922cf2354",
"sha256:15a2eff91f54d2b1f573cca8ca6fb58763ce8fea80e7899ab028f3987ef71cd5", "sha256:0da5f17bed67ffe1d72f79fbf98403513a6e51a4f9b8293c1ff8a64e121242be",
"sha256:15e8d0597cc6e8496de6f4dea2a6880c57e1251502a7072f5631108a1aa28521", "sha256:0f099a4a77daf9bb99787070854894fe588c7d6988ea729f970ba2b3b82c7559",
"sha256:165052a0e61c880f7093808a0c524ce1b3555bfa114c0dfb5c809cd07918a60d", "sha256:10c0caabff00ab0631d1e4fd25f56c7a5cf0f068426e5860d28dbbb972b509bf",
"sha256:178c5a4c7fdfb5cd79e372ae7f675390e670f3732e5bc68d327e01a5b3ff8d55", "sha256:133648c3405564e7fef9103f1768cb018de1b4976f3d8beff09cd4acea73bfe4",
"sha256:18214bac86341f1cc413772e66447d6cca10981e2880b70ecaf4e826c04f95e9", "sha256:154a19e1dcd430494fdad7d1a0fb36383baaa363e1cb9d5a7b744cd2418c44d2",
"sha256:1a54d7e7999735faacdcbe8128e30207abc2caf9f9fd7102d180b32f1b78bfce", "sha256:18f3a2c8908e63a66d3994808254397a5f989b1fb91087c33739f62bf1a1a064",
"sha256:1a926fa554870642607fd10e66ee25b75fdd9a7ca4bbffa93d424e4ae2bf734a", "sha256:190a3482818d69faef176171c7cae10d55cb4dd0c686b5aced7f592b5e5591c1",
"sha256:1c8f2a5d8006db5a555e06f9437e76bf52537d3dfd130cb8ae2b30866aca32c9", "sha256:190b20cbffc9cd7f308f7a57d406119c3af3ae197613325fd2d92d99c8882ad6",
"sha256:21ca6a47bf20db9e7ad74ca04b3d479e4d76109b68333eb23535553d2705339e", "sha256:1d7b786a1ddd9b8dda17c445060a94a465cba2e113603ae7bdc5364efc1efd11",
"sha256:22c540ed20167d3dbb1e2d868ca935180247d620c40eace90efa774504a40e3b", "sha256:20e412527ec1aac7e3a6542b32a9c34bb852c954676b05008f0e3d58c390a0ac",
"sha256:239578587b9c29469ab61149dda40a2fe714a6a4eca0f8ff9ea9439ec4b7bc30", "sha256:21add0aa968496a2bd8341d85720d09808e22e0adc7dbefc1e0f8f67c4b83f36",
"sha256:25b9cff6c9856bc396232e2f609ea0c5ec1a8a24c500cee4cca96ba8a3cd50b6", "sha256:2762db8049b230520358ac742cbc57bceaacebe34e5d25c096f2b4bc3887a3a8",
"sha256:26714898eb0d847aac8af94c4441c9cb50387847d0fe6b9fc4217c086cd68b80", "sha256:29c8c10a49d6a9586f592116618b99c3dabcb24d881b7a649e0691ef87f314c4",
"sha256:28a85b056c0eb7f5d864c0ceef07034117e8ebfca756f50648c71950a568ba11", "sha256:2b9916867fa1ed815739e3e37dda458f397dee25a0e293b808839cfc2a396ca0",
"sha256:2a3d1b05ffdd3e95687942ae7b13c63689f85d3f15c39b33329e3cb9ce6c015f", "sha256:2da2ca9495668ab77132a911f6bd530d2bfe686d10467584894efc3b66e9ffb5",
"sha256:2c3bb96b6026643ce24677650889b09073f60b9860a71765f843c99f9ab38b25", "sha256:2dc07dab252c63c4f6600e200b26fa05207db6b650d41ae88ab0cec4d6c59459",
"sha256:2fa23fdb3beab313950bbb49674e8a161e61449332d3997089fe3944953f1b77", "sha256:300e3026d17ae3328320ba78d3165bdb1c43d0dfdbc461a69ebbdc005d9ce0b3",
"sha256:2fe8c54b15a9cd4f93bc2aaceab354ec65af93370aa1496ba2f9c537a4855ee0", "sha256:30d42c34da2974a5e2e0b51c57ecf89892c1e83ed67e1084d1e27eefc27add91",
"sha256:30989a2451b693c3f9359d91098a744992b5431a0be4858f1fdf0ec76b457125", "sha256:329b994944993c45c3845047476ef4f231fe1a53972f18f8d005fd12fac163e1",
"sha256:31a4ad2b730128e273f1c22300da3e3631f125703e4fee0ac44d385abfb15671", "sha256:3a5e594b4be2dbfe021cee8d6d7d96e9bb19dee7ed7be351f43bca7a0619b978",
"sha256:337c8cd46a4c6568d367ed676cbf2d7de16f890bb31dbb54c44c1d6bb6d4a1de", "sha256:3b9358f6437a5fa0c765ffae5810c9830547baf4bcf469438b82845c3f33f998",
"sha256:33af25c4ff7723363cb8404dfc2eefeab4110b654f6c98d26aba8a08c745d860", "sha256:3b9790ae107fc8648155f120e80a58ef8e94424efefff5b355de84061de6a18b",
"sha256:3ea52df96566457735314794422274bd1962066bfb609e7eea9113d70cf04ffe", "sha256:40d1b57012bf9b4fefd25345aaa95aab3ca510cc693f33c2cb02a4b771d8e51a",
"sha256:3eae38daffd77c9621ae80c16932eea3fb3a4af141fb7cc724d4ad93eff9210d", "sha256:430fe5150816445c8294a36ce2612360037342d750cea179efe5de38c66670a8",
"sha256:41b53711f89008ba2de62e4c2d2260a8b357072fd4f18e1351b28955db2719dc", "sha256:4494c599effa16064f2b600f6eb28115182d6826847d795a55691339788d8a4d",
"sha256:451f9958850ea98440d542278368c8d1e1ea821e2494b204570ba34a340759df", "sha256:478b9f0ea86f957624dd2b159066855716f78db94666e9b04babe85fc013e01b",
"sha256:46cf239856b87fe1c86dfbb3d459d840a8b1649e7922b1e0bfb6b6464692644a", "sha256:4b7d7d10a1c82050efbb9a83d7a43974f70cf8f021afb86463b42e4ac4e5a46b",
"sha256:4779f356083c62e29b4198d290b7b17a39a69702d150678b7efff0fdddf494a8", "sha256:4c7ce072191ba23a4a4876452ccd5f2a67b926e66a248d052d39e9969cd3ab47",
"sha256:4902f4ecd5fcb6a5f482d7b0ae1c16c21f26fc5279b3b6127363d13ad8e7a9d9", "sha256:4da256fc567a57ded2a4aa962fc9e9d430ab740e5c67be9e98a63ef4eb467f2f",
"sha256:4d73d4948dcc5591d880db8933004e01f1dd2296df9de815354d53469beb26fe", "sha256:4e34f1cb6cdb036c5f4a839a2b74419f75fa36177a70c4bab2867f48973cbe44",
"sha256:4d9984017314da772f5f7460add7a0301a4ffc06c72c2998bb16c300a6253607", "sha256:4fb869faf4b484cb213199ced1e2732091559107637d429fc25d0a9731f5f630",
"sha256:4f298daaaea58d45e245a132d6d2bdfb6f856da50dc03d75ebb761439fb626cf", "sha256:539880ddf9a8cc54c9e6126e7d072c991563f0c90ef73b3519a783d53df00352",
"sha256:50ddbe3a7b4b6ab96812f5a4d570f401a2cdb95642fd04c062f98939610bbeee", "sha256:55f4b105a1686eb486069a9e578d502d1998e890d8144012225de9e0450aeabd",
"sha256:5338a313f998e1be7267191b7caaae82563b4a2b42b393561055412a34042caa", "sha256:5743f532e408cfd716fa16776b5a6447b83ff2cf39021fb5f8d052aa0f331508",
"sha256:5591daf81313096909d973fb2612fccd87528fdfdd39f6478bdce54543178954", "sha256:5b67b869f860eb19055e2560844d8c7d0935245938935bdb764b3e683e2014e2",
"sha256:56896ceeffe25946c4010320629e2d858ca763cd8ded273c81672a5edbcb1e0a", "sha256:5e30d8e399f38ae1ec86aa9be76d20ba15872dd0c41b4b46d1b78905857363b9",
"sha256:58a01ea34057463f7a98a4d6ff40160f65f945e924fec08a5b39e327e372875d", "sha256:660e11b9932f58f10151d0febd11f77d3b0d48d6fa4dd4686d8983f40187101e",
"sha256:5bfac7f236ba1a4d402644bdce47fb9db02a7cf3214a1f637d3a88390f9e5428", "sha256:67125404d12547443d74113862a80c10310cf875aff8dbfc5548fee1d9737123",
"sha256:5c5a8a83df95e51f7a7c2b083eaea134cbed39fc42c6aeb2e764ddb7ccccd43e", "sha256:6956ef0259a037f10da767741aca82925f6f9978bb6dceb5344e56ce0629ab07",
"sha256:5f2fb10518f6b365f5b720e43a529c3b2324ca02932f609631a44edb347d8d54", "sha256:698c37fca3761af69a09a1d39cc0492f7e8cb9e263af39a288dce8f3b8a9e2bc",
"sha256:64af877116edf051375b45f0bda648143176a017b13803ec7b3a3111dc05f4c5", "sha256:69c8298e8197b113f765a2ea60f49ceb8e1ea9eb308140b3cdc611e0d1de70b8",
"sha256:6d70fa9c6d2e955bde8cd327ffc11f2cc34bc21944e5571a46ca501e7eadef24", "sha256:6ef49462a615de062dcac8281944d0b036fe1e9c96a6c690bf6cf5e4b5488f0e",
"sha256:6d79f659965290af60d6acc8e2716341865fe74609a7ede2a33c2f86ad893b8f", "sha256:6f92d12a46b2a67d56194bb5d226dabf586b386d1f1a5e25be5b745a3080dbba",
"sha256:720963fee259291a88348ae9735d9deb5d334e84a016244f61c89f5a49aa400a", "sha256:70f70ea138e69ec3159e4a38fef52443cb8eb81388aeb241b273265ea16387c5",
"sha256:75a3b6e9c695a6570ea488db75b84bb592ff70a944957efa1c655867c575018b", "sha256:72a0e87b2196120523fc6194ca6b580fcffa12d7daa4d57a16d7838e60f82d0e",
"sha256:792462abfeeca6cc8c6c1e6d27e14319682f0182f6b0ba37befe911af794db70", "sha256:72b32d8c471930c95d49640ec99f7694f9b040ca1342ff03ed69d3aea90f9339",
"sha256:79ec4498a545733ecace48d780d22407411b07403a2e08b9a4d7596c0b97ebd7", "sha256:746e25f17ba4203b5933773782cf2d30bca5cdb66a9ba5d48a53a6c795aedc57",
"sha256:7f14d6b303e55bd7d19b28309ef8014370e84a3806c5e452e078e7df7344d97a", "sha256:75e33c9187da271d1dbeb2582ab2df2e441346492098f67559b09173ea4edde4",
"sha256:7f65bd5d4cdb396295b6aa07f84ca659ac65c5c68b53956a6d95219e304b0ada", "sha256:7875abfd90f2ae3aa22d50f3fa1c93bbae456458cc73d3179b838f07bed1fc10",
"sha256:81c6b4a6c1af800d52a6fa32389ef8f4281583f4f99dc1a40f2bb47667281541", "sha256:78ab0d4166cf35c73054d1e04f224af1edc3cb4d75da8b6f74f4cff7c300f358",
"sha256:82a07de83dce09b4fa1bccbdc8bde8f188b131666af0dc9048ba0a0e448d8a3b", "sha256:78cbda57a2808d994517b53571eaa2d9299359f63aa71cf4bc94210169aad8b1",
"sha256:847c7f61964225fc489fe1d49eda7e0e0d253e98862c012cecf845f9ad45cdf4", "sha256:7c133052737c7c75bfa49f5ba71918166fe988995b26a0d2f263a79bf8fed58a",
"sha256:84b52b2cf77bb7f703d16c4007b021078dbbe6cf8ffb57abe81a7bacfc175ef2", "sha256:7eae9e763fbd32f19f2a66dfc2e37906f8422e0c4ad4a6c9dcf9d3246740812e",
"sha256:86685fa04067f7175f9718489ae755f6acde03593a1a9ca89305554af40e14fd", "sha256:814bb54db2a016026efc055a3527461e5eb551c0d91b32eeade003829ff84311",
"sha256:8a9c962c64a4c08def58b9799333e33af94ec53038cf151d36edacdb41f81646", "sha256:81ede1f094f26eeaff62e029ff1bc4e84e9d568f20d4669f64dcf7c7b18a28fc",
"sha256:8cbd4bfc933b33b85c43ef4c1f4d5e3e9d91975ea6368acf5fbac02bac06ea89", "sha256:838fd67b3d00c5a64181073282a2c0bf8f76465da4844d5e79d2dbbc64c987dc",
"sha256:8ffe660e963ae711cb9e2b8d8461c9b1ad6167823837fc17d59d5e539fb898fa", "sha256:89c7c125a0913d71ba9cc1fa8e14c7cfe1517b1c1f45416e1f9babcedd3b545d",
"sha256:94652da1a4ca7cfb69c15dd6986b205e0bd9c63a05029c3b48b4201085f527bd", "sha256:8a345b5dc8ab8cafdf338e08530d48fe3f73df27f4ff569be793c7a7e7bb6b6b",
"sha256:969fd67de8c42affdb47b38b80f1eaa79ac0ef17d65407cdd931db1675315af1", "sha256:8c3fe25871f1758519a3ad8dcafb1bd95c5d1aaeb122e6492ac739ab11fa5907",
"sha256:9858dcbc23ba7eaadcd319786b982278a1a2b2020720b19db43e309579ff76fb", "sha256:8e12d50d4d65c74bd877e15c276992263b878456a7cfcf72521e7205a553557f",
"sha256:99d25aff3745c54e61ab340b98400c52ebec04290a62078155e0d7eb30380220", "sha256:9adacf6fdadeeb96e6c902aef08d02d2f45429fdbf0a75b80307e435156066f8",
"sha256:99f55e14e7c56f4fafe1343480c32b110ef03836c21ff7c48bae7add6818f77c", "sha256:9befda0dbd27ed95fba1c26be4bf98a49ba166b3c91beb5fc04364c130ce950c",
"sha256:9d35d8f8a1c9ed4e2b08187b513f8a3c71958600129db3aa26d85ea3abfd1310", "sha256:9fa5620f7f352f9706924c0e2071a212be36421f09ee064b0fd7e1128289fcdb",
"sha256:a2ba92f59e30ce915e9e79af37649432e3a212ddddf416d4d686b1b4825bcdb2", "sha256:a681bbf9f94027d66e15974cd207cec1a2993837b9c45acf5f6b22a67632b1c2",
"sha256:a2cb35a6efaa0e3623d8272471371a12c7e07b51a33e5efce9b58f655d864b4e", "sha256:ab363a5baae965fb3438f2137583853ad9c77d7e45f2a62ba63e609a34d792ea",
"sha256:a358277122456666a8b2a0b9aa04f1b89d34e8aa41d08a6557d693e6abb6667c", "sha256:ac49519fcfeb4a7ecdf6b7d0ec6cac409e59f94c1bb54630db577a97893b6e38",
"sha256:a60da2f9efbed355edb35a1fb6829148676786c829fad708bb6bb47211b3593a", "sha256:ad5a71c1ef4a2e404c2c888db09226c821d9d14eff8813e1da873572f5fbb89d",
"sha256:aa7dec53c25f1949513457ef8b0ea1fb40e76c672cc4d2daa8ad3c8d6b73491a", "sha256:af01133e78e5528ee282ceb1cf4bc54aecb937c2001913e751452ad7dffbbeb1",
"sha256:b1572ee0eb1967e71787af636bb7d1eb9c6735d5337762c450650e7f51844594", "sha256:b3118ec012a799456f7fca6cc002c078590578b7640fbaab52d8ecb9a651f1c1",
"sha256:b4f10d3f304be7183fac79bf2cd997f82e16aa9a9f37343d76c026c6e435a8a8", "sha256:b46b7aec9272fd81c984e723e599957629a91204120b3e7f0933f138e0792fdf",
"sha256:bbbbfbb7d039b20d289ce56b1beb46138d65769d04af50c199c6ac4cb6054d52", "sha256:ba0339d6aa80615a17f47fabc5700485e9469121d658458f95cdd2003288c28b",
"sha256:c394a3f055b49f92626f83c1a0b6d6cd2c628f1ccd72481c3e3c6aa4695f3b20", "sha256:c08cd5b19c570e1e9e094a6ce70d35bb39d12360e0763474ed9374229f174fcc",
"sha256:c396358023b876cff547ce87f4e8ff8a2280598873a137e8cc69e115262260b8", "sha256:c0b367a00e8c88a714b2384c97dedcc85340547b3a54b6037a42fca5554d0576",
"sha256:c5ba07e58fd98c9782201e79eb8dd4225733d212a5a3700f9a84d329bd0463a6", "sha256:c263ed9922942353a954cfbcd5f81b7626c0e20dc7f3e53d4926e8bc560ab845",
"sha256:c764fb167411d5afaef88138542a4bfa28bd5e5ded5e8e42df87cef965efd6e9", "sha256:c3387c314695f9790dce12fcf44357197ebf773651b6a4195f5e091cf500ae73",
"sha256:cbba763d99de0255a3e4938f25a8579930ac8aa089233cb2fb2ed7d04d4aff02", "sha256:c4fd3399eaf6f1c77ea3132611efbc3d7a8c0eb899793387b3266be221dc75fd",
"sha256:cbd1660fb48827381ce3a621a4fdc237959e1cd4e98b098952a8f624a0726425", "sha256:cac0145491619287ff893853bf3ca4d98d5ef94b617271184a5af68a06ac301a",
"sha256:cd761d158f67e288fd0ebe00c3b158095ce80a4bc7c32b60c7121224003ba70d", "sha256:cd9b848c17ef034f2ae31b2a1bd9276710c2baf03509f1f3fa4dc4382b0a1b53",
"sha256:cdfbb27f2c46bb5bbdcee147530cbc5ca8ab858d7693924e88e30ada21b2c5e2", "sha256:ced27af6aee28782260bfa5643797937e96a6489bca972202834017208cf74f5",
"sha256:d2dbe8a3baf2d842e342e8acb06ae3844765d38df67687c144cdeb71f1bcb5d7", "sha256:cf99e36c0f6ae5643ecef7ad7e1194aeb4a9798d9cff60b20ac041533fa6db0a",
"sha256:d5c931ec1c03111718cabf85f6012bb2815fa0ce578175567fa8d6f2cc15d3b4", "sha256:d7d5f7f6f80388ce94849775da5f4082ab5e123e259972961970e190d60f5d2b",
"sha256:df6d7bf3e15b7e6e202a16ff4948a51759354016026deb04ab9b5acbbe35e096", "sha256:dc2cab92c42991b711132bc52405680e075d1505d4356c4468bc6e9c93d49137",
"sha256:dfbe2aa45b273f49e715c5345d94874cb65a28482bf231af408891c260601b8d", "sha256:ddcd25a1f72b2b545fb27e17882046a6c161f3f24514b2e028c00c58ed73a2dd",
"sha256:e12769d3adcc419e65860de946df8d2ed274932177ac1cdb05186e498aaa9149", "sha256:defa3c12cb06b2fd2066a9e21bf00aab96465be84d9585c8c05195f080510506",
"sha256:e5aed4754895942ae15ffa48c52d181e1c1463236fda68d2dba29c03aa61786b", "sha256:df3ffa6ef88166bb36f5d1492e71e664868b9b8b6afd55821e0ac0cb96625441",
"sha256:e645b4c365d6f1f9e0799380ad6395268f3c3b898244a650aaeb8d9d27b74c35", "sha256:e127b2e7fc533728295196f9265d12834530f475bc6cd6f74619df415d04b8b1",
"sha256:ed3493a369fe849cce98542d7405c88030b355e4d2e113887cb7ecc86c205773", "sha256:e9ff57452fcadfd1a379314234657b8f4e9967ae64480ddf7c2fd82139bc8cf8",
"sha256:f08342dc8d19214faa7ef99574dea6c37a2790d6d04a9793ef8fa76c188dc08d", "sha256:eb9fa02b9f5bbdb1d036a0c68999337793fa244528e0ce825e4b97cb7f7db99f",
"sha256:f0a55cf02d2cdd739b40ce10c09bbdd520e141217696add7a48b56e67bdfdfe6", "sha256:ec3d0a6c37a816ea6e3550697c60d90861c9b0f982a98a40b59ac1f7a360bfa9",
"sha256:f0ce9d9e07c75da8027c62b4c9f45771d1d8aae7dc9ad7fb606c6a5aedbe9741", "sha256:ef123b6aead12e0784f72970e8d94a96ac0d0aa4438c7ab9235e2f8669a0a5ae",
"sha256:f1f723e260c35e1c7c57a09d3a6ebe681bd56c83e1208ae3ce1869b7c0d10d4f", "sha256:f90bb3c680804ec9630bcf8c0965e54b4de84d33b17d7da57c87c30f0c64c6f5",
"sha256:f2fcbe9b3a5996b417e030aa33a562e7e20dfc86271e53d7e841fc5df16268b8", "sha256:fb1df55f5700187c6db4b47dbdaf8a0653a111341ac7fccc596b397aa3399e65",
"sha256:f3fd8df63c41ff6a676d031956aebf68ebbc687b47c507da25501eb22eec341f", "sha256:fd68db1a0f5d9374a7b735414efe48d2b3ecbf0adea39299bb48030988f16149",
"sha256:f8d3417db5e14a6789073b21ae44439a755289477901901bae378a57b905e148", "sha256:fd6b5b6df14f98b2e7e474c1c7ea55fc32dcab038b3b34b76a591dec8ba50915",
"sha256:fbf05678c2ae0064fb1b8de7e9e8f0fc30621b73c8477786dd0fb3868044a8c8", "sha256:fd7e3158be382f8f140caccc0dc7742a7553ce4bf2978982abe3054d2cedd705",
"sha256:fc98ff43abad61f00515ad9a06213b7716699146e46eabd256cdfe7cb522bd97", "sha256:fe989bbed9d6f332c1e24d333936f3fa1375f380cd8028da0b985dcdefa6015a",
"sha256:ff1863f037dad765ef5963efc2e37d399ac023e192a6f2bb394e2377d023cefe" "sha256:ff2ca039a161d49a8c713f5380def315c6f793df5fe348b94782b1dbee37a644"
], ],
"version": "==3.8.0" "version": "==3.8.1"
}, },
"bitstring": { "bitstring": {
"hashes": [ "hashes": [
@@ -159,11 +159,11 @@
}, },
"certifi": { "certifi": {
"hashes": [ "hashes": [
"sha256:027692e4402ad994f1c42e52a4997a9763c646b73e4096e4d5d6db8af1d6f0fa", "sha256:3cb2210c8f88ba2318d29b0388d1023c8492ff72ecdde4ebdaddbb13a31b1c4a",
"sha256:e887ab5cee78ea814d3472169153c2d12cd43b14bd03329a39a9c6e2e80bfba7" "sha256:8d455352a37b71bf76a79caa83a3d6c25afee4a385d632127b6afb3963f1c580"
], ],
"markers": "python_version >= '3.7'", "markers": "python_version >= '3.7'",
"version": "==2026.2.25" "version": "==2026.4.22"
}, },
"cffi": { "cffi": {
"hashes": [ "hashes": [
@@ -257,185 +257,201 @@
}, },
"charset-normalizer": { "charset-normalizer": {
"hashes": [ "hashes": [
"sha256:014837af6fabf57121b6254fa8ade10dceabc3528b27b721a64bbc7b8b1d4eb4", "sha256:007d05ec7321d12a40227aae9e2bc6dca73f3cb21058999a1df9e193555a9dcc",
"sha256:01a1ed54b953303ca7e310fafe0fe347aab348bd81834a0bcd602eb538f89d66", "sha256:03853ed82eeebbce3c2abfdbc98c96dc205f32a79627688ac9a27370ea61a49c",
"sha256:0294916d6ccf2d069727d65973c3a1ca477d68708db25fd758dd28b0827cff54", "sha256:07d9e39b01743c3717745f4c530a6349eadbfa043c7577eef86c502c15df2c67",
"sha256:02a9d1b01c1e12c27883b0c9349e0bcd9ae92e727ff1a277207e1a262b1cbf05", "sha256:08e721811161356f97b4059a9ba7bafb23ea5ee2255402c42881c214e173c6b4",
"sha256:036c079aa08a6a592b82487f97c60b439428320ed1b2ea0b3912e99d30c77765", "sha256:0c96c3b819b5c3e9e165495db84d41914d6894d55181d2d108cc1a69bfc9cce0",
"sha256:039215608ac7b358c4da0191d10fc76868567fbf276d54c14721bdedeb6de064", "sha256:0ea948db76d31190bf08bd371623927ee1339d5f2a0b4b1b4a4439a65298703c",
"sha256:0625665e4ebdddb553ab185de5db7054393af8879fb0c87bd5690d14379d6819", "sha256:0f7eb884681e3938906ed0434f20c63046eacd0111c4ba96f27b76084cd679f5",
"sha256:0a45e504f5e1be0bd385935a8e1507c442349ca36f511a47057a71c9d1d6ea9e", "sha256:12a6fff75f6bc66711b73a2f0addfc4c8c15a20e805146a02d147a318962c444",
"sha256:0b362bcd27819f9c07cbf23db4e0e8cd4b44c5ecd900c2ff907b2b92274a7412", "sha256:12d8baf840cc7889b37c7c770f478adea7adce3dcb3944d02ec87508e2dcf153",
"sha256:0c300cefd9b0970381a46394902cd18eaf2aa00163f999590ace991989dcd0fc", "sha256:14265bfe1f09498b9d8ec91e9ec9fa52775edf90fcbde092b25f4a33d444fea9",
"sha256:1088345bcc93c58d8d8f3d783eca4a6e7a7752bbff26c3eee7e73c597c191c2e", "sha256:16d971e29578a5e97d7117866d15889a4a07befe0e87e703ed63cd90cb348c01",
"sha256:10b473fc8dca1c3ad8559985794815f06ca3fc71942c969129070f2c3cdf7281", "sha256:177a0ba5f0211d488e295aaf82707237e331c24788d8d76c96c5a41594723217",
"sha256:131716d6786ad5e3dc542f5cc6f397ba3339dc0fb87f87ac30e550e8987756af", "sha256:1a87ca9d5df6fe460483d9a5bbf2b18f620cbed41b432e2bddb686228282d10b",
"sha256:14498a429321de554b140013142abe7608f9d8ccc04d7baf2ad60498374aefa2", "sha256:1c2a768fdd44ee4a9339a9b0b130049139b8ce3c01d2ce09f67f5a68048d477c",
"sha256:149ec69866c3d6c2fb6f758dbc014ecb09f30b35a5ca90b6a8a2d4e54e18fdfe", "sha256:1c2aed2e5e41f24ea8ef1590b8e848a79b56f3a5564a65ceec43c9d692dc7d8a",
"sha256:165c7b21d19365464e8f70e5ce5e12524c58b48c78c1f5a57524603c1ab003f8", "sha256:1dc8b0ea451d6e69735094606991f32867807881400f808a106ee1d963c46a83",
"sha256:1827734a5b308b65ac54e86a618de66f935a4f63a8a462ff1e19a6788d6c2262", "sha256:1efde3cae86c8c273f1eb3b287be7d8499420cf2fe7585c41d370d3e790054a5",
"sha256:19092dde50335accf365cce21998a1c6dd8eafd42c7b226eb54b2747cdce2fac", "sha256:202389074300232baeb53ae2569a60901f7efadd4245cf3a3bf0617d60b439d7",
"sha256:1a374cc0b88aa710e8865dc1bd6edb3743c59f27830f0293ab101e4cf3ce9f85", "sha256:203104ed3e428044fd943bc4bf45fa73c0730391f9621e37fe39ecf477b128cb",
"sha256:1d1401945cb77787dbd3af2446ff2d75912327c4c3a1526ab7955ecf8600687c", "sha256:2257141f39fe65a3fdf38aeccae4b953e5f3b3324f4ff0daf9f15b8518666a2c",
"sha256:1f2da5cbb9becfcd607757a169e38fb82aa5fd86fae6653dea716e7b613fe2cf", "sha256:298930cec56029e05497a76988377cbd7457ba864beeea92ad7e844fe74cd1f1",
"sha256:259cd1ca995ad525f638e131dbcc2353a586564c038fc548a3fe450a91882139", "sha256:2cd4a60d0e2fb04537162c62bbbb4182f53541fe0ede35cdf270a1c1e723cc42",
"sha256:2820a98460c83663dd8ec015d9ddfd1e4879f12e06bb7d0500f044fb477d2770", "sha256:2d6eb928e13016cea4f1f21d1e10c1cebd5a421bc57ddf5b1142ae3f86824fab",
"sha256:28269983f25a4da0425743d0d257a2d6921ea7d9b83599d4039486ec5b9f911d", "sha256:2fe249cb4651fd12605b7288b24751d8bfd46d35f12a20b1ba33dea122e690df",
"sha256:2b970382e4a36bed897c19f310f31d7d13489c11b4f468ddfba42d41cddfb918", "sha256:30b8d1d8c52a48c2c5690e152c169b673487a2a58de1ec7393196753063fcd5e",
"sha256:2da4eedcb6338e2321e831a0165759c0c620e37f8cd044a263ff67493be8ffb3", "sha256:320ade88cfb846b8cd6b4ddf5ee9e80ee0c1f52401f2456b84ae1ae6a1a5f207",
"sha256:30987f4a8ed169983f93e1be8ffeea5214a779e27ed0b059835c7afe96550ad7", "sha256:3534e7dcbdcf757da6b85a0bbf5b6868786d5982dd959b065e65481644817a18",
"sha256:30a2b1a48478c3428d047ed9690d57c23038dac838a87ad624c85c0a78ebeb39", "sha256:36836d6ff945a00b88ba1e4572d721e60b5b8c98c155d465f56ad19d68f23734",
"sha256:340810d34ef83af92148e96e3e44cb2d3f910d2bf95e5618a5c467d9f102231d", "sha256:38c0109396c4cfc574d502df99742a45c72c08eff0a36158b6f04000043dbf38",
"sha256:3f64c6bf8f32f9133b668c7f7a7cbdbc453412bc95ecdbd157f3b1e377a92990", "sha256:3946fa46a0cf3e4c8cb1cc52f56bb536310d34f25f01ca9b6c16afa767dab110",
"sha256:4167a621a9a1a986c73777dbc15d4b5eac8ac5c10393374109a343d4013ec765", "sha256:3bec022aec2c514d9cf199522a802bd007cd588ab17ab2525f20f9c34d067c18",
"sha256:4354e401eb6dab9aed3c7b4030514328a6c748d05e1c3e19175008ca7de84fb1", "sha256:3c9a494bc5ec77d43cea229c4f6db1e4d8fe7e1bbffa8b6f0f0032430ff8ab44",
"sha256:4481e6da1830c8a1cc0b746b47f603b653dadb690bcd851d039ffaefe70533aa", "sha256:3dce51d0f5e7951f8bb4900c257dad282f49190fdbebecd4ba99bcc41fef404d",
"sha256:4b8551b6e6531e156db71193771c93bda78ffc4d1e6372517fe58ad3b91e4659", "sha256:3dedcc22d73ec993f42055eff4fcfed9318d1eeb9a6606c55892a26964964e48",
"sha256:4cd966c2559f501c6fd69294d082c2934c8dd4719deb32c22961a5ac6db0df1d", "sha256:4042d5c8f957e15221d423ba781e85d553722fc4113f523f2feb7b188cc34c5e",
"sha256:50bcbca6603c06a1dcc7b056ed45c37715fb5d2768feb3bcd37d2313c587a5b9", "sha256:481551899c856c704d58119b5025793fa6730adda3571971af568f66d2424bb5",
"sha256:530beedcec9b6e027e7a4b6ce26eed36678aa39e17da85e6e03d7bd9e8e9d7c9", "sha256:4dc1e73c36828f982bfe79fadf5919923f8a6f4df2860804db9a98c48824ce8d",
"sha256:568e3c34b58422075a1b49575a6abc616d9751b4d61b23f712e12ebb78fe47b2", "sha256:4e5163c14bffd570ef2affbfdd77bba66383890797df43dc8b4cc7d6f500bf53",
"sha256:573ef5814c4b7c0d59a7710aa920eaaaef383bd71626aa420fba27b5cab92e8d", "sha256:511ef87c8aec0783e08ac18565a16d435372bc1ac25a91e6ac7f5ef2b0bff790",
"sha256:58ad8270cfa5d4bef1bc85bd387217e14ff154d6630e976c6f56f9a040757475", "sha256:532bc9bf33a68613fd7d65e4b1c71a6a38d7d42604ecf239c77392e9b4e8998c",
"sha256:597d10dec876923e5c59e48dbd366e852eacb2b806029491d307daea6b917d7c", "sha256:54523e136b8948060c0fa0bc7b1b50c32c186f2fceee897a495406bb6e311d2b",
"sha256:5bcb3227c3d9aaf73eaaab1db7ccd80a8995c509ee9941e2aae060ca6e4e5d81", "sha256:5649fd1c7bade02f320a462fdefd0b4bd3ce036065836d4f42e0de958038e116",
"sha256:5cffde4032a197bd3b42fd0b9509ec60fb70918d6970e4cc773f20fc9180ca67", "sha256:56be790f86bfb2c98fb742ce566dfb4816e5a83384616ab59c49e0604d49c51d",
"sha256:5fea359734b140d0d6741189fea5478c6091b54ffc69d7ce119e0a05637d8c99", "sha256:5b77459df20e08151cd6f8b9ef8ef1f961ef73d85c21a555c7eed5b79410ec10",
"sha256:60d68e820af339df4ae8358c7a2e7596badeb61e544438e489035f9fbf3246a5", "sha256:5ed6ab538499c8644b8a3e18debabcd7ce684f3fa91cf867521a7a0279cab2d6",
"sha256:610f72c0ee565dfb8ae1241b666119582fdbfe7c0975c175be719f940e110694", "sha256:6178f72c5508bfc5fd446a5905e698c6212932f25bcdd4b47a757a50605a90e2",
"sha256:65a126fb4b070d05340a84fc709dd9e7c75d9b063b610ece8a60197a291d0adf", "sha256:6370e8686f662e6a3941ee48ed4742317cafbe5707e36406e9df792cdb535776",
"sha256:65b3c403a5b6b8034b655e7385de4f72b7b244869a22b32d4030b99a60593eca", "sha256:64f02c6841d7d83f832cd97ccf8eb8a906d06eb95d5276069175c696b024b60a",
"sha256:66dee73039277eb35380d1b82cccc69cc82b13a66f9f4a18da32d573acf02b7c", "sha256:65bcd23054beab4d166035cabbc868a09c1a49d1efe458fe8e4361215df40265",
"sha256:708c7acde173eedd4bfa4028484426ba689d2103b28588c513b9db2cd5ecde9c", "sha256:66671f93accb62ed07da56613636f3641f1a12c13046ce91ffc923721f23c008",
"sha256:728c6a963dfab66ef865f49286e45239384249672cd598576765acc2a640a636", "sha256:6696b7688f54f5af4462118f0bfa7c1621eeb87154f77fa04b9295ce7a8f2943",
"sha256:754f96058e61a5e22e91483f823e07df16416ce76afa4ebf306f8e1d1296d43f", "sha256:6785f414ae0f3c733c437e0f3929197934f526d19dfaa75e18fdb4f94c6fb374",
"sha256:75dfd1afe0b1647449e852f4fb428195a7ed0588947218f7ba929f6538487f02", "sha256:67f6279d125ca0046a7fd386d01b311c6363844deac3e5b069b514ba3e63c246",
"sha256:75ee9c1cce2911581a70a3c0919d8bccf5b1cbc9b0e5171400ec736b4b569497", "sha256:6c114670c45346afedc0d947faf3c7f701051d2518b943679c8ff88befe14f8e",
"sha256:76a9d0de4d0eab387822e7b35d8f89367dd237c72e82ab42b9f7bf5e15ada00f", "sha256:6e0d51f618228538a3e8f46bd246f87a6cd030565e015803691603f55e12afb5",
"sha256:77be992288f720306ab4108fe5c74797de327f3248368dfc7e1a916d6ed9e5a2", "sha256:6ed74185b2db44f41ef35fd1617c5888e59792da9bbc9190d6c7300617182616",
"sha256:7ad83b8f9379176c841f8865884f3514d905bcd2a9a3b210eaa446e7d2223e4d", "sha256:708838739abf24b2ceb208d0e22403dd018faeef86ddac04319a62ae884c4f15",
"sha256:8197abe5ca1ffb7d91e78360f915eef5addff270f8a71c1fc5be24a56f3e4873", "sha256:715479b9a2802ecac752a3b0efa2b0b60285cf962ee38414211abdfccc233b41",
"sha256:82cc7c2ad42faec8b574351f8bc2a0c049043893853317bd9bb309f5aba6cb5a", "sha256:733784b6d6def852c814bce5f318d25da2ee65dd4839a0718641c696e09a2960",
"sha256:8a28afb04baa55abf26df544e3e5c6534245d3daa5178bc4a8eeb48202060d0e", "sha256:750e02e074872a3fad7f233b47734166440af3cdea0add3e95163110816d6752",
"sha256:8b78d8a609a4b82c273257ee9d631ded7fac0d875bdcdccc109f3ee8328cfcb1", "sha256:752a45dc4a6934060b3b0dab47e04edc3326575f82be64bc4fc293914566503e",
"sha256:8ce11cd4d62d11166f2b441e30ace226c19a3899a7cf0796f668fba49a9fb123", "sha256:7579e913a5339fb8fa133f6bbcfd8e6749696206cf05acdbdca71a1b436d8e72",
"sha256:8fff79bf5978c693c9b1a4d71e4a94fddfb5fe744eb062a318e15f4a2f63a550", "sha256:7641bb8895e77f921102f72833904dcd9901df5d6d72a2ab8f31d04b7e51e4e7",
"sha256:92263f7eca2f4af326cd20de8d16728d2602f7cfea02e790dcde9d83c365d7cc", "sha256:7804338df6fcc08105c7745f1502ba68d900f45fd770d5bdd5288ddccb8a42d8",
"sha256:93b3b2cc5cf1b8743660ce77a4f45f3f6d1172068207c1defc779a36eea6bb36", "sha256:80d04837f55fc81da168b98de4f4b797ef007fc8a79ab71c6ec9bc4dd662b15b",
"sha256:95adae7b6c42a6c5b5b559b1a99149f090a57128155daeea91732c8d970d8644", "sha256:813c0e0132266c08eb87469a642cb30aaff57c5f426255419572aaeceeaa7bf4",
"sha256:97ab7787092eb9b50fb47fa04f24c75b768a606af1bcba1957f07f128a7219e4", "sha256:82b271f5137d07749f7bf32f70b17ab6eaabedd297e75dce75081a24f76eb545",
"sha256:9db5e3fcdcee89a78c04dffb3fe33c79f77bd741a624946db2591c81b2fc85b0", "sha256:84c018e49c3bf790f9c2771c45e9313a08c2c2a6342b162cd650258b57817706",
"sha256:a118e2e0b5ae6b0120d5efa5f866e58f2bb826067a646431da4d6a2bdae7950e", "sha256:8751d2787c9131302398b11e6c8068053dcb55d5a8964e114b6e196cf16cb366",
"sha256:a2aecdb364b8a1802afdc7f9327d55dad5366bc97d8502d0f5854e50712dbc5f", "sha256:8778f0c7a52e56f75d12dae53ae320fae900a8b9b4164b981b9c5ce059cd1fcb",
"sha256:a66aa5022bf81ab4b1bebfb009db4fd68e0c6d4307a1ce5ef6a26e5878dfc9e4", "sha256:87fad7d9ba98c86bcb41b2dc8dbb326619be2562af1f8ff50776a39e55721c5a",
"sha256:a68766a3c58fde7f9aaa22b3786276f62ab2f594efb02d0a1421b6282e852e98", "sha256:8d828b6667a32a728a1ad1d93957cdf37489c57b97ae6c4de2860fa749b8fc1e",
"sha256:aa2f963b4da26daf46231d9b9e0e2c9408a751f8f0d0f44d2de56d3caf51d294", "sha256:8e385e4267ab76874ae30db04c627faaaf0b509e1ccc11a95b3fc3e83f855c00",
"sha256:aa92ec1102eaff840ccd1021478af176a831f1bccb08e526ce844b7ddda85c22", "sha256:92a0a01ead5e668468e952e4238cccd7c537364eb7d851ab144ab6627dbbe12f",
"sha256:ac59c15e3f1465f722607800c68713f9fbc2f672b9eb649fe831da4019ae9b23", "sha256:94e1885b270625a9a828c9793b4d52a64445299baa1fea5a173bf1d3dd9a1a5a",
"sha256:ae8b03427410731469c4033934cf473426faff3e04b69d2dfb64a4281a3719f8", "sha256:a180c5e59792af262bf263b21a3c49353f25945d8d9f70628e73de370d55e1e1",
"sha256:afca7f78067dd27c2b848f1b234623d26b87529296c6c5652168cc1954f2f3b2", "sha256:a277ab8928b9f299723bc1a2dabb1265911b1a76341f90a510368ca44ad9ab66",
"sha256:b2d37d78297b39a9eb9eb92c0f6df98c706467282055419df141389b23f93362", "sha256:a5fe03b42827c13cdccd08e6c0247b6a6d4b5e3cdc53fd1749f5896adcdc2356",
"sha256:b3e71afc578b98512bfe7bdb822dd6bc57d4b0093b4b6e5487c1e96ad4ace242", "sha256:a6c5863edfbe888d9eff9c8b8087354e27618d9da76425c119293f11712a6319",
"sha256:ba20bdf69bd127f66d0174d6f2a93e69045e0b4036dc1ca78e091bcc765830c4", "sha256:a89c23ef8d2c6b27fd200a42aa4ac72786e7c60d40efdc76e6011260b6e949c4",
"sha256:c108f8619e504140569ee7de3f97d234f0fbae338a7f9f360455071ef9855a95", "sha256:adb2597b428735679446b46c8badf467b4ca5f5056aae4d51a19f9570301b1ad",
"sha256:c23eb3263356d94858655b3e63f85ac5d50970c6e8febcdde7830209139cc37d", "sha256:ae196f021b5e7c78e918242d217db021ed2a6ace2bc6ae94c0fc596221c7f58d",
"sha256:c5af897b45fa606b12464ccbe0014bbf8c09191e0a66aab6aa9d5cf6e77e0c94", "sha256:ae89db9e5f98a11a4bf50407d4363e7b09b31e55bc117b4f7d80aab97ba009e5",
"sha256:c7a80a9242963416bd81f99349d5f3fce1843c303bd404f204918b6d75a75fd6", "sha256:aed52fea0513bac0ccde438c188c8a471c4e0f457c2dd20cdbf6ea7a450046c7",
"sha256:c7e84e0c0005e3bdc1a9211cd4e62c78ba80bc37b2365ef4410cd2007a9047f2", "sha256:aef65cd602a6d0e0ff6f9930fcb1c8fec60dd2cfcb6facaf4bdb0e5873042db0",
"sha256:cace89841c0599d736d3d74a27bc5821288bb47c5441923277afc6059d7fbcb4", "sha256:af21eb4409a119e365397b2adbaca4c9ccab56543a65d5dbd9f920d6ac29f686",
"sha256:cd2d0f0ec9aa977a27731a3209ebbcacebebaf41f902bd453a928bfd281cf7f8", "sha256:b14b2d9dac08e28bb8046a1a0434b1750eb221c8f5b87a68f4fa11a6f97b5e34",
"sha256:d01de5e768328646e6a3fa9e562706f8f6641708c115c62588aef2b941a4f88e", "sha256:bb6d88045545b26da47aa879dd4a89a71d1dce0f0e549b1abcb31dfe4a8eac49",
"sha256:d1028de43596a315e2720a9849ee79007ab742c06ad8b45a50db8cdb7ed4a82a", "sha256:bb8cc7534f51d9a017b93e3e85b260924f909601c3df002bcdb58ddb4dc41a5c",
"sha256:d27ce22ec453564770d29d03a9506d449efbb9fa13c00842262b2f6801c48cce", "sha256:bc17a677b21b3502a21f66a8cc64f5bfad4df8a0b8434d661666f8ce90ac3af1",
"sha256:d29dd9c016f2078b43d0c357511e87eee5b05108f3dd603423cb389b89813969", "sha256:bd6c2a1c7573c64738d716488d2cdd3c00e340e4835707d8fdb8dc1a66ef164e",
"sha256:d31f0d1671e1534e395f9eb84a68e0fb670e1edb1fe819a9d7f564ae3bc4e53f", "sha256:bd9b23791fe793e4968dba0c447e12f78e425c59fc0e3b97f6450f4781f3ee60",
"sha256:d4eb8ac7469b2a5d64b5b8c04f84d8bf3ad340f4514b98523805cbf46e3b3923", "sha256:c03a41a8784091e67a39648f70c5f97b5b6a37f216896d44d2cdcb82615339a0",
"sha256:d5e52d127045d6ae01a1e821acfad2f3a1866c54d0e837828538fabe8d9d1bd6", "sha256:c0f081d69a6e58272819b70288d3221a6ee64b98df852631c80f293514d3b274",
"sha256:d77f97e515688bd615c1d1f795d540f32542d514242067adcb8ef532504cb9ee", "sha256:c35abb8bfff0185efac5878da64c45dafd2b37fb0383add1be155a763c1f083d",
"sha256:d8ed79b8f6372ca4254955005830fd61c1ccdd8c0fac6603e2c145c61dd95db6", "sha256:c36c333c39be2dbca264d7803333c896ab8fa7d4d6f0ab7edb7dfd7aea6e98c0",
"sha256:dc57a0baa3eeedd99fafaef7511b5a6ef4581494e8168ee086031744e2679467", "sha256:c45e9440fb78f8ddabcf714b68f936737a121355bf59f3907f4e17721b9d1aae",
"sha256:e09f671a54ce70b79a1fc1dc6da3072b7ef7251fadb894ed92d9aa8218465a5f", "sha256:c593052c465475e64bbfe5dbd81680f64a67fdc752c56d7a0ae205dc8aeefe0f",
"sha256:e22d1059b951e7ae7c20ef6b06afd10fb95e3c41bf3c4fbc874dba113321c193", "sha256:cdd68a1fb318e290a2077696b7eb7a21a49163c455979c639bf5a5dcdc46617d",
"sha256:e37bd100d2c5d3ba35db9c7c5ba5a9228cbcffe5c4778dc824b164e5257813d7", "sha256:ce3412fbe1e31eb81ea42f4169ed94861c56e643189e1e75f0041f3fe7020abe",
"sha256:e51ae7d81c825761d941962450f50d041db028b7278e7b08930b4541b3e45cb9", "sha256:cf1493cd8607bec4d8a7b9b004e699fcf8f9103a9284cc94962cb73d20f9d4a3",
"sha256:e545b51da9f9af5c67815ca0eb40676c0f016d0b0381c86f20451e35696c5f95", "sha256:cf29836da5119f3c8a8a70667b0ef5fdca3bb12f80fd06487cfa575b3909b393",
"sha256:e6302ca4ae283deb0af68d2fbf467474b8b6aedcd3dab4db187e07f94c109763", "sha256:d4a48e5b3c2a489fae013b7589308a40146ee081f6f509e047e0e096084ceca1",
"sha256:e71bbb595973622b817c042bd943c3f3667e9c9983ce3d205f973f486fec98a7", "sha256:d560742f3c0d62afaccf9f41fe485ed69bd7661a241f86a3ef0f0fb8b1a397af",
"sha256:ec56a2266f32bc06ed3c3e2a8f58417ce02f7e0356edc89786e52db13c593c98", "sha256:d6038d37043bced98a66e68d3aa2b6a35505dc01328cd65217cefe82f25def44",
"sha256:ed1a9a204f317ef879b32f9af507d47e49cd5e7f8e8d5d96358c98373314fc60", "sha256:d61f00a0869d77422d9b2aba989e2d24afa6ffd552af442e0e58de4f35ea6d00",
"sha256:ed97c282ee4f994ef814042423a529df9497e3c666dca19be1d4cd1129dc7ade", "sha256:d635aab80466bc95771bb78d5370e74d36d1fe31467b6b29b8b57b2a3cd7d22c",
"sha256:ed98364e1c262cf5f9363c3eca8c2df37024f52a8fa1180a3610014f26eac51c", "sha256:dca4bbc466a95ba9c0234ef56d7dd9509f63da22274589ebd4ed7f1f4d4c54e3",
"sha256:ee57b926940ba00bca7ba7041e665cc956e55ef482f851b9b65acb20d867e7a2", "sha256:dd915403e231e6b1809fe9b6d9fc55cf8fb5e02765ac625d9cd623342a7905d7",
"sha256:f1d725b754e967e648046f00c4facc42d414840f5ccc670c5670f59f83693e4f", "sha256:e044c39e41b92c845bc815e5ae4230804e8e7bc29e399b0437d64222d92809dd",
"sha256:f8102ae93c0bc863b1d41ea0f4499c20a83229f52ed870850892df555187154a", "sha256:e060d01aec0a910bdccb8be71faf34e7799ce36950f8294c8bf612cba65a2c9e",
"sha256:fc1c64934b8faf7584924143eb9db4770bbdb16659626e1a1a4d9efbcb68d947", "sha256:e1421b502d83040e6d7fb2fb18dff63957f720da3d77b2fbd3187ceb63755d7b",
"sha256:ff95a9283de8a457e6b12989de3f9f5193430f375d64297d323a615ea52cbdb3" "sha256:e17b8d5d6a8c47c85e68ca8379def1303fd360c3e22093a807cd34a71cd082b8",
"sha256:e5f4d355f0a2b1a31bc3edec6795b46324349c9cb25eed068049e4f472fb4259",
"sha256:e712b419df8ba5e42b226c510472b37bd57b38e897d3eca5e8cfd410a29fa859",
"sha256:e74327fb75de8986940def6e8dee4f127cc9752bee7355bb323cc5b2659b6d46",
"sha256:e80c8378d8f3d83cd3164da1ad2df9e37a666cdde7b1cb2298ed0b558064be30",
"sha256:e8ac484bf18ce6975760921bb6148041faa8fef0547200386ea0b52b5d27bf7b",
"sha256:eca9705049ad3c7345d574e3510665cb2cf844c2f2dcfe675332677f081cbd46",
"sha256:ed065083d0898c9d5b4bbec7b026fd755ff7454e6e8b73a67f8c744b13986e24",
"sha256:edac0f1ab77644605be2cbba52e6b7f630731fc42b34cb0f634be1a6eface56a",
"sha256:effc3f449787117233702311a1b7d8f59cba9ced946ba727bdc329ec69028e24",
"sha256:f22dec1690b584cea26fade98b2435c132c1b5f68e39f5a0b7627cd7ae31f1dc",
"sha256:f495a1652cf3fbab2eb0639776dad966c2fb874d79d87ca07f9d5f059b8bd215",
"sha256:f496c9c3cc02230093d8330875c4c3cdfc3b73612a5fd921c65d39cbcef08063",
"sha256:f59099f9b66f0d7145115e6f80dd8b1d847176df89b234a5a6b3f00437aa0832",
"sha256:f59ad4c0e8f6bba240a9bb85504faa1ab438237199d4cce5f622761507b8f6a6",
"sha256:fbccdc05410c9ee21bbf16a35f4c1d16123dcdeb8a1d38f33654fa21d0234f79",
"sha256:fea24543955a6a729c45a73fe90e08c743f0b3334bbf3201e6c4bc1b0c7fa464"
], ],
"markers": "python_version >= '3.7'", "markers": "python_version >= '3.7'",
"version": "==3.4.5" "version": "==3.4.7"
}, },
"click": { "click": {
"hashes": [ "hashes": [
"sha256:12ff4785d337a1bb490bb7e9c2b1ee5da3112e94a8622f26a6c77f5d2fc6842a", "sha256:398329ad4837b2ff7cbe1dd166a4c0f8900c3ca3a218de04466f38f6497f18a2",
"sha256:981153a64e25f12d547d3426c367a4857371575ee7ad18df2a6183ab0545b2a6" "sha256:a2bf429bb3033c89fa4936ffb35d5cb471e3719e1f3c8a7c3fff0b8314305613"
], ],
"markers": "python_version >= '3.10'", "markers": "python_version >= '3.10'",
"version": "==8.3.1" "version": "==8.3.3"
}, },
"cryptography": { "cryptography": {
"hashes": [ "hashes": [
"sha256:02f547fce831f5096c9a567fd41bc12ca8f11df260959ecc7c3202555cc47a72", "sha256:0024b87d47ae2399165a6bfb20d24888881eeab83ae2566d62467c5ff0030ce7",
"sha256:039917b0dc418bb9f6edce8a906572d69e74bd330b0b3fea4f79dab7f8ddd235", "sha256:07efe86201817e7d3c18781ca9770bc0db04e1e48c994be384e4602bc38f8f27",
"sha256:1abfdb89b41c3be0365328a410baa9df3ff8a9110fb75e7b52e66803ddabc9a9", "sha256:09f6d7bf6724f8db8b32f11eccf23efc8e759924bc5603800335cf8859a3ddbd",
"sha256:2ae6971afd6246710480e3f15824ed3029a60fc16991db250034efd0b9fb4356", "sha256:11438c7518132d95f354fa01a4aa2f806d172a061a7bed18cf18cbdacdb204d7",
"sha256:2b7a67c9cd56372f3249b39699f2ad479f6991e62ea15800973b956f4b73e257", "sha256:11dbb9f50a0f1bb9757b3d8c27c1101780efb8f0bdecfb12439c22a74d64c001",
"sha256:351695ada9ea9618b3500b490ad54c739860883df6c1f555e088eaf25b1bbaad", "sha256:14432c8a9bcb37009784f9594a62fae211a2ae9543e96c92b2a8e4c3cd5cd0c4",
"sha256:38946c54b16c885c72c4f59846be9743d699eee2b69b6988e0a00a01f46a61a4", "sha256:1581aef4219f7ca2849d0250edaa3866212fb74bf5667284f46aa92f9e65c1ca",
"sha256:3b4995dc971c9fb83c25aa44cf45f02ba86f71ee600d81091c2f0cbae116b06c", "sha256:160ad728f128972d362e714054f6ba0067cab7fb350c5202a9ae8ae4ce3ef1a0",
"sha256:3ce58ba46e1bc2aac4f7d9290223cead56743fa6ab94a5d53292ffaac6a91614", "sha256:1a405c08857258c11016777e11c02bacbe7ef596faf259305d282272a3a05cbe",
"sha256:3ee190460e2fbe447175cda91b88b84ae8322a104fc27766ad09428754a618ed", "sha256:1e47422b5557bb82d3fff997e8d92cff4e28b9789576984f08c248d2b3535d93",
"sha256:4108d4c09fbbf2789d0c926eb4152ae1760d5a2d97612b92d508d96c861e4d31", "sha256:20fdbe3e38fb67c385d233c89371fa27f9909f6ebca1cecc20c13518dae65475",
"sha256:420d0e909050490d04359e7fdb5ed7e667ca5c3c402b809ae2563d7e66a92229", "sha256:2207a498b03275d0051589e326b79d4cf59985c99031b05bb292ac52631c37fe",
"sha256:47fb8a66058b80e509c47118ef8a75d14c455e81ac369050f20ba0d23e77fee0", "sha256:256d07c78a04d6b276f5df935a9923275f53bd1522f214447fdf365494e2d515",
"sha256:4c3341037c136030cb46e4b1e17b7418ea4cbd9dd207e4a6f3b2b24e0d4ac731", "sha256:2b45761c6ec22b7c726d6a829558777e32d0f1c8be7c3f3480f9c912d5ee8a10",
"sha256:4d7e3d356b8cd4ea5aff04f129d5f66ebdc7b6f8eae802b93739ed520c47c79b", "sha256:2ebd84adf0728c039a3be2700289378e1c164afc6748df1a5ed456767bef9ba7",
"sha256:4d8ae8659ab18c65ced284993c2265910f6c9e650189d4e3f68445ef82a810e4", "sha256:34b4358b925a5ea3e14384ca781a2c0ef7ac219b57bb9eacc4457078e2b19f92",
"sha256:4e817a8920bfbcff8940ecfd60f23d01836408242b30f1a708d93198393a80b4", "sha256:3fb8fa48075fad7193f2e5496135c6a76ac4b2aa5a38433df0a539296b377829",
"sha256:50bfb6925eff619c9c023b967d5b77a54e04256c4281b0e21336a130cd7fc263", "sha256:4e1de79e047e25d6e9f8cea71c86b4a53aced64134f0f003bbcbf3655fd172c8",
"sha256:556e106ee01aa13484ce9b0239bca667be5004efb0aabbed28d353df86445595", "sha256:4f7722c97826770bab8ae92959a2e7b20a5e9e9bf4deae68fd86c3ca457bab52",
"sha256:582f5fcd2afa31622f317f80426a027f30dc792e9c80ffee87b993200ea115f1", "sha256:51c9313e90bd1690ec5a75ed047c27c0b8e6c570029712943d6116ef9a90620b",
"sha256:5be7bf2fb40769e05739dd0046e7b26f9d4670badc7b032d6ce4db64dddc0678", "sha256:5d0e362ff51041b0c0d219cc7d6924d7b8996f57ce5712bdcef71eb3c65a59cc",
"sha256:60ee7e19e95104d4c03871d7d7dfb3d22ef8a9b9c6778c94e1c8fcc8365afd48", "sha256:6651d32eff255423503aa276739da98c30f26c40cbeffcc6048e0d54ef704c0c",
"sha256:61aa400dce22cb001a98014f647dc21cda08f7915ceb95df0c9eaf84b4b6af76", "sha256:6eebcaf0df1d21ce1f90605c9b432dd2c4f4ab665ac29a40d5e3fc68f51b5e63",
"sha256:68f68d13f2e1cb95163fa3b4db4bf9a159a418f5f6e7242564fc75fcae667fd0", "sha256:6f29f36582e6151d9686235e586dd35bb67491f024767d10b842e520dc6a07ac",
"sha256:7d1f30a86d2757199cb2d56e48cce14deddf1f9c95f1ef1b64ee91ea43fe2e18", "sha256:7a02675e2fabd0c0fc04c868b8781863cbf1967691543c22f5470500ff840b31",
"sha256:7d731d4b107030987fd61a7f8ab512b25b53cef8f233a97379ede116f30eb67d", "sha256:7f1207974a904e005f762869996cf620e9bf79ecb4622f148550bb48e0eb35a7",
"sha256:803812e111e75d1aa73690d2facc295eaefd4439be1023fefc4995eaea2af90d", "sha256:7f68d6fbc7fbbcfb0939fea72c3b96a9f9a6edfc0e1b1d29778a2066030418b1",
"sha256:80a8d7bfdf38f87ca30a5391c0c9ce4ed2926918e017c29ddf643d0ed2778ea1", "sha256:7fda2f02c9015db3f42bb8a22324a454516ed10a8c29ca6ece6cdbb5efe2a203",
"sha256:8293f3dea7fc929ef7240796ba231413afa7b68ce38fd21da2995549f5961981", "sha256:80887c5cbd1774683cb126f0ab4184567f080071d5acf62205acb354b4b753b7",
"sha256:8456928655f856c6e1533ff59d5be76578a7157224dbd9ce6872f25055ab9ab7", "sha256:835d2d7f47cdc53b3224e90810fb1d36ca94ea29cc1801fb4c1bc43876735769",
"sha256:890bcb4abd5a2d3f852196437129eb3667d62630333aacc13dfd470fad3aaa82", "sha256:8c1a736bbb3288005796c3f7ccb9453360d7fed483b13b9f468aea5171432923",
"sha256:94a76daa32eb78d61339aff7952ea819b1734b46f73646a07decb40e5b3448e2", "sha256:9af828c0d5a65c70ec729cd7495a4bf1a67ecb66417b8f02ff125ab8a6326a74",
"sha256:9f16fbdf4da055efb21c22d81b89f155f02ba420558db21288b3d0035bafd5f4", "sha256:9c59ab0e0fa3a180a5a9c59f3a5abe3ef90d474bc56d7fadfbe80359491b615b",
"sha256:a3d1fae9863299076f05cb8a778c467578262fae09f9dc0ee9b12eb4268ce663", "sha256:9f8e55fe4e63613a5e1cc5819030f27b97742d720203a087802ce4ce9ceb52bb",
"sha256:a3d507bb6a513ca96ba84443226af944b0f7f47dcc9a399d110cd6146481d24c", "sha256:9fe6b7c64926c765f9dff301f9c1b867febcda5768868ca084e18589113732ab",
"sha256:abace499247268e3757271b2f1e244b36b06f8515cf27c4d49468fc9eb16e93d", "sha256:a49a3eb5341b9503fa3000a9a0db033161db90d47285291f53c2a9d2cd1b7f76",
"sha256:ba2a27ff02f48193fc4daeadf8ad2590516fa3d0adeeb34336b96f7fa64c1e3a", "sha256:a9b761f012a943b7de0e828843c5688d0de94a0578d44d6c85a1bae32f87791f",
"sha256:bc84e875994c3b445871ea7181d424588171efec3e185dced958dad9e001950a", "sha256:b1c76fca783aa7698eb21eb14f9c4aa09452248ee54a627d125025a43f83e7a7",
"sha256:bfd56bb4b37ed4f330b82402f6f435845a5f5648edf1ad497da51a8452d5d62d", "sha256:b9a8943e359b7615db1a3ba587994618e094ff3d6fa5a390c73d079ce18b3973",
"sha256:c18ff11e86df2e28854939acde2d003f7984f721eba450b56a200ad90eeb0e6b", "sha256:be12cb6a204f77ed968bcefe68086eb061695b540a3dd05edac507a3111b25f0",
"sha256:c3bcce8521d785d510b2aad26ae2c966092b7daa8f45dd8f44734a104dc0bc1a", "sha256:cffbba3392df0fa8629bb7f43454ee2925059ee158e23c54620b9063912b86c8",
"sha256:c4143987a42a2397f2fc3b4d7e3a7d313fbe684f67ff443999e803dd75a76826", "sha256:ed67ea4e0cfb5faa5bc7ecb6e2b8838f3807a03758eec239d6c21c8769355310",
"sha256:c69fd885df7d089548a42d5ec05be26050ebcd2283d89b3d30676eb32ff87dee", "sha256:edd4da498015da5b9f26d38d3bfc2e90257bfa9cbed1f6767c282a0025ae649b",
"sha256:ced80795227d70549a411a4ab66e8ce307899fad2220ce5ab2f296e687eacde9", "sha256:ef6b3634087f18d2155b1e8ce264e5345a753da2c5fa9815e7d41315c90f8318",
"sha256:d66e421495fdb797610a08f43b05269e0a5ea7f5e652a89bfd5a7d3c1dee3648", "sha256:f1557695e5c2b86e204f6ce9470497848634100787935ab7adc5397c54abd7ab",
"sha256:d861ee9e76ace6cf36a6a89b959ec08e7bc2493ee39d07ffe5acb23ef46d27da", "sha256:f5c15764f261394b22aef6b00252f5195f46f2ca300bec57149474e2538b31f8",
"sha256:e9251e3be159d1020c4030bd2e5f84d6a43fe54b6c19c12f51cde9542a2817b2", "sha256:f5c3296dab66202f1b18a91fa266be93d6aa0c2806ea3d67762c69f60adc71aa",
"sha256:f145bba11b878005c496e93e257c1e88f154d278d2638e6450d17e0f31e558d2", "sha256:f7db373287273d8af1414cf95dc4118b13ffdc62be521997b0f2b270771fef50",
"sha256:fe346b143ff9685e40192a4960938545c699054ba11d4f9029f94751e3f71d87" "sha256:f9a034b642b960767fb343766ae5ba6ad653f2e890ddd82955aef288ffea8736"
], ],
"markers": "python_version >= '3.8' and python_full_version not in '3.9.0, 3.9.1'", "markers": "python_version >= '3.8' and python_full_version not in '3.9.0, 3.9.1'",
"version": "==46.0.5" "version": "==47.0.0"
}, },
"esptool": { "esptool": {
"hashes": [ "hashes": [
@@ -454,11 +470,11 @@
}, },
"idna": { "idna": {
"hashes": [ "hashes": [
"sha256:771a87f49d9defaf64091e6e6fe9c18d4833f140bd19464795bc32d966ca37ea", "sha256:585ea8fe5d69b9181ec1afba340451fba6ba764af97026f92a91d4eef164a242",
"sha256:795dafcc9c04ed0c1fb032c2aa73654d8e8c5023a7df64a53f39190ada629902" "sha256:892ea0cde124a99ce773decba204c5552b69c3c67ffd5f232eb7696135bc8bb3"
], ],
"markers": "python_version >= '3.8'", "markers": "python_version >= '3.8'",
"version": "==3.11" "version": "==3.13"
}, },
"intelhex": { "intelhex": {
"hashes": [ "hashes": [
@@ -485,19 +501,19 @@
}, },
"microdot": { "microdot": {
"hashes": [ "hashes": [
"sha256:363e3ebfc80b7e0415779848c9332e4e7fb7bd365ee54d3620abffe42ed82946", "sha256:3ba8bab39ae52bca08ee7024dfc71afb7cff089f0b6611d2a1f617abfcee749c",
"sha256:abfb82ca31cc430174e4761cc7356adc4bff00ea758d437c2b258883dc63f464" "sha256:d56824f4510e628dac711c86121957894ceaf833298e4d25f06c29d2b19a1721"
], ],
"index": "pypi", "index": "pypi",
"version": "==2.6.0" "version": "==2.6.1"
}, },
"mpremote": { "mpremote": {
"hashes": [ "hashes": [
"sha256:11d134c69b21b487dae3d03eed54c8ccbf84c916c8732a3e069a97cae47be3d4", "sha256:2df2a50f3c8098cae8c732dbf2541e7e58185e7896513b45d05196901e049334",
"sha256:6bb75774648091dad6833af4f86c5bf6505f8d7aec211380f9e6996c01d23cb5" "sha256:fdb5626be83dff4e53c0184f8950814cb519b524dba7f1f8b1668aa477257a31"
], ],
"index": "pypi", "index": "pypi",
"version": "==1.27.0" "version": "==1.28.0"
}, },
"outcome": { "outcome": {
"hashes": [ "hashes": [
@@ -509,11 +525,11 @@
}, },
"platformdirs": { "platformdirs": {
"hashes": [ "hashes": [
"sha256:1ec356301b7dc906d83f371c8f487070e99d3ccf9e501686456394622a01a934", "sha256:3bfa75b0ad0db84096ae777218481852c0ebc6c727b3168c1b9e0118e458cf0a",
"sha256:68a9a4619a666ea6439f2ff250c12a853cd1cbd5158d258bd824a7df6be2f868" "sha256:e61adb1d5e5cb3441b4b7710bea7e4c12250ca49439228cc1021c00dcfac0917"
], ],
"markers": "python_version >= '3.10'", "markers": "python_version >= '3.10'",
"version": "==4.9.4" "version": "==4.9.6"
}, },
"pycparser": { "pycparser": {
"hashes": [ "hashes": [
@@ -525,11 +541,11 @@
}, },
"pygments": { "pygments": {
"hashes": [ "hashes": [
"sha256:636cb2477cec7f8952536970bc533bc43743542f70392ae026374600add5b887", "sha256:6757cd03768053ff99f3039c1a36d6c0aa0b263438fcab17520b30a303a82b5f",
"sha256:86540386c03d588bb81d44bc3928634ff26449851e99741617ecb9037ee5ec0b" "sha256:81a9e26dd42fd28a23a2d169d86d7ac03b46e2f8b59ed4698fb4785f946d0176"
], ],
"markers": "python_version >= '3.8'", "markers": "python_version >= '3.9'",
"version": "==2.19.2" "version": "==2.20.0"
}, },
"pyjwt": { "pyjwt": {
"hashes": [ "hashes": [
@@ -651,19 +667,19 @@
}, },
"requests": { "requests": {
"hashes": [ "hashes": [
"sha256:2462f94637a34fd532264295e186976db0f5d453d1cdd31473c85a6a161affb6", "sha256:18817f8c57c6263968bc123d237e3b8b08ac046f5456bd1e307ee8f4250d3517",
"sha256:dbba0bac56e100853db0ea71b82b4dfd5fe2bf6d3754a8893c3af500cec7d7cf" "sha256:4e6d1ef462f3626a1f0a0a9c42dd93c63bad33f9f1c1937509b8c5c8718ab56a"
], ],
"index": "pypi", "index": "pypi",
"version": "==2.32.5" "version": "==2.33.1"
}, },
"rich": { "rich": {
"hashes": [ "hashes": [
"sha256:793431c1f8619afa7d3b52b2cdec859562b950ea0d4b6b505397612db8d5362d", "sha256:33bd4ef74232fb73fe9279a257718407f169c09b78a87ad3d296f548e27de0bb",
"sha256:b8daa0b9e4eef54dd8cf7c86c03713f53241884e814f4e2f5fb342fe520f639b" "sha256:edd07a4824c6b40189fb7ac9bc4c52536e9780fbbfbddf6f1e2502c31b068c36"
], ],
"markers": "python_full_version >= '3.8.0'", "markers": "python_full_version >= '3.9.0'",
"version": "==14.3.3" "version": "==15.0.0"
}, },
"rich-click": { "rich-click": {
"hashes": [ "hashes": [
@@ -675,11 +691,11 @@
}, },
"selenium": { "selenium": {
"hashes": [ "hashes": [
"sha256:003e971f805231ad63e671783a2b91a299355d10cefb9de964c36ff3819115aa", "sha256:4f97639055dcfa9eadf8ccf549ba7b0e49c655d4e2bde19b9a44e916b754e769",
"sha256:b8ccde8d2e7642221ca64af184a92c19eee6accf2e27f20f30472f5efae18eb1" "sha256:bada5c08a989f812728a4b5bea884d8e91894e939a441cc3a025201ce718581e"
], ],
"index": "pypi", "index": "pypi",
"version": "==4.41.0" "version": "==4.43.0"
}, },
"sniffio": { "sniffio": {
"hashes": [ "hashes": [
@@ -758,6 +774,7 @@
"version": "==4.15.0" "version": "==4.15.0"
}, },
"urllib3": { "urllib3": {
"extras": [],
"hashes": [ "hashes": [
"sha256:1b62b6884944a57dbe321509ab94fd4d3b307075e0c2eae991ac71ee15ad38ed", "sha256:1b62b6884944a57dbe321509ab94fd4d3b307075e0c2eae991ac71ee15ad38ed",
"sha256:bf272323e553dfb2e87d9bfd225ca7b0f467b919d7bbd355436d3fd37cb0acd4" "sha256:bf272323e553dfb2e87d9bfd225ca7b0f467b919d7bbd355436d3fd37cb0acd4"
@@ -888,6 +905,73 @@
"markers": "python_version >= '3.9'", "markers": "python_version >= '3.9'",
"version": "==1.9.0" "version": "==1.9.0"
}, },
"websockets": {
"hashes": [
"sha256:0298d07ee155e2e9fda5be8a9042200dd2e3bb0b8a38482156576f863a9d457c",
"sha256:04cdd5d2d1dacbad0a7bf36ccbcd3ccd5a30ee188f2560b7a62a30d14107b31a",
"sha256:08d7af67b64d29823fed316505a89b86705f2b7981c07848fb5e3ea3020c1abe",
"sha256:152284a83a00c59b759697b7f9e9cddf4e3c7861dd0d964b472b70f78f89e80e",
"sha256:1637db62fad1dc833276dded54215f2c7fa46912301a24bd94d45d46a011ceec",
"sha256:19c4dc84098e523fd63711e563077d39e90ec6702aff4b5d9e344a60cb3c0cb1",
"sha256:1c1b30e4f497b0b354057f3467f56244c603a79c0d1dafce1d16c283c25f6e64",
"sha256:2b9f1e0d69bc60a4a87349d50c09a037a2607918746f07de04df9e43252c77a3",
"sha256:31a52addea25187bde0797a97d6fc3d2f92b6f72a9370792d65a6e84615ac8a8",
"sha256:32da954ffa2814258030e5a57bc73a3635463238e797c7375dc8091327434206",
"sha256:335c23addf3d5e6a8633f9f8eda77efad001671e80b95c491dd0924587ece0b3",
"sha256:3425ac5cf448801335d6fdc7ae1eb22072055417a96cc6b31b3861f455fbc156",
"sha256:349f83cd6c9a415428ee1005cadb5c2c56f4389bc06a9af16103c3bc3dcc8b7d",
"sha256:37b31c1623c6605e4c00d466c9d633f9b812ea430c11c8a278774a1fde1acfa9",
"sha256:417b28978cdccab24f46400586d128366313e8a96312e4b9362a4af504f3bbad",
"sha256:485c49116d0af10ac698623c513c1cc01c9446c058a4e61e3bf6c19dff7335a2",
"sha256:4a1aba3340a8dca8db6eb5a7986157f52eb9e436b74813764241981ca4888f03",
"sha256:50f23cdd8343b984957e4077839841146f67a3d31ab0d00e6b824e74c5b2f6e8",
"sha256:52a0fec0e6c8d9a784c2c78276a48a2bdf099e4ccc2a4cad53b27718dbfd0230",
"sha256:52ac480f44d32970d66763115edea932f1c5b1312de36df06d6b219f6741eed8",
"sha256:5569417dc80977fc8c2d43a86f78e0a5a22fee17565d78621b6bb264a115d4ea",
"sha256:569d01a4e7fba956c5ae4fc988f0d4e187900f5497ce46339c996dbf24f17641",
"sha256:583b7c42688636f930688d712885cf1531326ee05effd982028212ccc13e5957",
"sha256:5a4b4cc550cb665dd8a47f868c8d04c8230f857363ad3c9caf7a0c3bf8c61ca6",
"sha256:5f451484aeb5cafee1ccf789b1b66f535409d038c56966d6101740c1614b86c6",
"sha256:5f6261a5e56e8d5c42a4497b364ea24d94d9563e8fbd44e78ac40879c60179b5",
"sha256:6e5a82b677f8f6f59e8dfc34ec06ca6b5b48bc4fcda346acd093694cc2c24d8f",
"sha256:71c989cbf3254fbd5e84d3bff31e4da39c43f884e64f2551d14bb3c186230f00",
"sha256:781caf5e8eee67f663126490c2f96f40906594cb86b408a703630f95550a8c3e",
"sha256:7be95cfb0a4dae143eaed2bcba8ac23f4892d8971311f1b06f3c6b78952ee70b",
"sha256:7d837379b647c0c4c2355c2499723f82f1635fd2c26510e1f587d89bc2199e72",
"sha256:86890e837d61574c92a97496d590968b23c2ef0aeb8a9bc9421d174cd378ae39",
"sha256:878b336ac47938b474c8f982ac2f7266a540adc3fa4ad74ae96fea9823a02cc9",
"sha256:8b6e209ffee39ff1b6d0fa7bfef6de950c60dfb91b8fcead17da4ee539121a79",
"sha256:8cc451a50f2aee53042ac52d2d053d08bf89bcb31ae799cb4487587661c038a0",
"sha256:8d7f0659570eefb578dacde98e24fb60af35350193e4f56e11190787bee77dac",
"sha256:8e1dab317b6e77424356e11e99a432b7cb2f3ec8c5ab4dabbcee6add48f72b35",
"sha256:8ff32bb86522a9e5e31439a58addbb0166f0204d64066fb955265c4e214160f0",
"sha256:95724e638f0f9c350bb1c2b0a7ad0e83d9cc0c9259f3ea94e40d7b02a2179ae5",
"sha256:9b5aca38b67492ef518a8ab76851862488a478602229112c4b0d58d63a7a4d5c",
"sha256:a069d734c4a043182729edd3e9f247c3b2a4035415a9172fd0f1b71658a320a8",
"sha256:a0b31e0b424cc6b5a04b8838bbaec1688834b2383256688cf47eb97412531da1",
"sha256:a35539cacc3febb22b8f4d4a99cc79b104226a756aa7400adc722e83b0d03244",
"sha256:a5e18a238a2b2249c9a9235466b90e96ae4795672598a58772dd806edc7ac6d3",
"sha256:a653aea902e0324b52f1613332ddf50b00c06fdaf7e92624fbf8c77c78fa5767",
"sha256:abf050a199613f64c886ea10f38b47770a65154dc37181bfaff70c160f45315a",
"sha256:af80d74d4edfa3cb9ed973a0a5ba2b2a549371f8a741e0800cb07becdd20f23d",
"sha256:b14dc141ed6d2dde437cddb216004bcac6a1df0935d79656387bd41632ba0bbd",
"sha256:b784ca5de850f4ce93ec85d3269d24d4c82f22b7212023c974c401d4980ebc5e",
"sha256:bc59589ab64b0022385f429b94697348a6a234e8ce22544e3681b2e9331b5944",
"sha256:c0204dc62a89dc9d50d682412c10b3542d748260d743500a85c13cd1ee4bde82",
"sha256:c0ee0e63f23914732c6d7e0cce24915c48f3f1512ec1d079ed01fc629dab269d",
"sha256:caab51a72c51973ca21fa8a18bd8165e1a0183f1ac7066a182ff27107b71e1a4",
"sha256:d6297ce39ce5c2e6feb13c1a996a2ded3b6832155fcfc920265c76f24c7cceb5",
"sha256:daa3b6ff70a9241cf6c7fc9e949d41232d9d7d26fd3522b1ad2b4d62487e9904",
"sha256:df57afc692e517a85e65b72e165356ed1df12386ecb879ad5693be08fac65dde",
"sha256:e0334872c0a37b606418ac52f6ab9cfd17317ac26365f7f65e203e2d0d0d359f",
"sha256:e6578ed5b6981005df1860a56e3617f14a6c307e6a71b4fff8c48fdc50f3ed2c",
"sha256:eaded469f5e5b7294e2bdca0ab06becb6756ea86894a47806456089298813c89",
"sha256:f4a32d1bd841d4bcbffdcb3d2ce50c09c3909fbead375ab28d0181af89fd04da",
"sha256:fd3cb4adb94a2a6e2b7c0d8d05cb94e6f1c81a0cf9dc2694fb65c7e8d94c42e4"
],
"index": "pypi",
"version": "==16.0"
},
"wsproto": { "wsproto": {
"hashes": [ "hashes": [
"sha256:61eea322cdf56e8cc904bd3ad7573359a242ba65688716b0710a5eb12beab584", "sha256:61eea322cdf56e8cc904bd3ad7573359a242ba65688716b0710a5eb12beab584",
@@ -897,5 +981,46 @@
"version": "==1.3.2" "version": "==1.3.2"
} }
}, },
"develop": {} "develop": {
"iniconfig": {
"hashes": [
"sha256:c76315c77db068650d49c5b56314774a7804df16fee4402c1f19d6d15d8c4730",
"sha256:f631c04d2c48c52b84d0d0549c99ff3859c98df65b3101406327ecc7d53fbf12"
],
"markers": "python_version >= '3.10'",
"version": "==2.3.0"
},
"packaging": {
"hashes": [
"sha256:5fc45236b9446107ff2415ce77c807cee2862cb6fac22b8a73826d0693b0980e",
"sha256:ff452ff5a3e828ce110190feff1178bb1f2ea2281fa2075aadb987c2fb221661"
],
"markers": "python_version >= '3.8'",
"version": "==26.2"
},
"pluggy": {
"hashes": [
"sha256:7dcc130b76258d33b90f61b658791dede3486c3e6bfb003ee5c9bfb396dd22f3",
"sha256:e920276dd6813095e9377c0bc5566d94c932c33b27a3e3945d8389c374dd4746"
],
"markers": "python_version >= '3.9'",
"version": "==1.6.0"
},
"pygments": {
"hashes": [
"sha256:6757cd03768053ff99f3039c1a36d6c0aa0b263438fcab17520b30a303a82b5f",
"sha256:81a9e26dd42fd28a23a2d169d86d7ac03b46e2f8b59ed4698fb4785f946d0176"
],
"markers": "python_version >= '3.9'",
"version": "==2.20.0"
},
"pytest": {
"hashes": [
"sha256:2c5efc453d45394fdd706ade797c0a81091eccd1d6e4bccfcd476e2b8e0ab5d9",
"sha256:b86ada508af81d19edeb213c681b1d48246c1a91d304c6c81a427674c17eb91c"
],
"index": "pypi",
"version": "==9.0.3"
}
}
} }
+34 -9
View File
@@ -1,26 +1,30 @@
# led-controller # led-controller
LED controller web app for managing profiles, tabs, presets, and colour palettes, and sending commands to LED devices over the serial -> ESP-NOW bridge. LED controller web app for managing profiles, **zones**, presets, and colour palettes, and sending commands to LED devices. Outbound paths include:
- **Serial → ESP-NOW bridge**: JSON lines over UART to an ESP32 that forwards ESP-NOW frames (configure `serial_port` and baud in `settings.json` / Settings model).
- **Wi-Fi LED drivers**: TCP JSON lines (default port **8765** on the Pi; drivers discover the controller via **UDP 8766** broadcast).
## Run ## Run
- One-time setup for port 80 without root: `sudo scripts/setup-port80.sh` - One-time setup for port 80 without root: `sudo scripts/setup-port80.sh`
- Start app: `pipenv run run` - Start app: `pipenv run run` (override listen port with the **`PORT`** environment variable)
- Dev watcher (auto-restart on `src/` changes): `pipenv run dev` - Dev watcher (auto-restart on `src/` changes): `pipenv run dev`
- Regenerate **`docs/help.pdf`** from **`docs/help.md`**: `pipenv run help-pdf` (requires **pandoc** and **chromium** on the host)
## UI modes ## UI modes
- **Run mode**: focused control view. Select tabs/presets and apply profiles. Editing actions are hidden. - **Run mode**: focused control view. Select zones/presets and apply profiles. Editing actions are hidden.
- **Edit mode**: management view. Shows Tabs, Presets, Patterns, Colour Palette, and Send Presets controls, plus per-tile preset edit/remove and drag-reorder. - **Edit mode**: management view. Shows **Zones**, Presets, Patterns, Colour Palette, and Send Presets controls, plus per-tile preset edit/remove and drag-reorder.
## Profiles ## Profiles
- Applying a profile updates session scope and refreshes the active tab content. - Applying a profile updates session scope and refreshes the active zone content.
- In **Run mode**, Profiles supports apply-only behavior (no create/clone/delete). - In **Run mode**, Profiles supports apply-only behaviour (no create/clone/delete).
- In **Edit mode**, Profiles supports create/clone/delete. - In **Edit mode**, Profiles supports create/clone/delete.
- Creating a profile always creates a populated `default` tab (starter presets). - Creating a profile always creates a populated `default` zone (starter presets).
- Optional **DJ tab** seeding creates: - Optional **DJ zone** seeding creates:
- `dj` tab bound to device name `dj` - `dj` zone bound to device name `dj`
- starter DJ presets (rainbow, single colour, transition) - starter DJ presets (rainbow, single colour, transition)
## Preset colours and palette linking ## Preset colours and palette linking
@@ -34,3 +38,24 @@ LED controller web app for managing profiles, tabs, presets, and colour palettes
- Main API reference: `docs/API.md` - Main API reference: `docs/API.md`
## Driver pattern modules
Pattern **`.py`** sources live under **`led-driver/src/patterns`**. The Pi app resolves that path via `util.driver_patterns.driver_patterns_dir()`. If you deploy without that tree next to the app, set **`LED_CONTROLLER_PATTERNS_DIR`** to the directory that contains those files.
## Animation engine (Pi-side)
`src/engine/` lets the Pi drive LEDs itself, in addition to the ESP32 drivers:
- **Pixel generator**: runs the **unchanged** `led-driver/src/patterns/*.py` under CPython (a `utime` shim plus a NeoPixel-like buffer) with the same preset JSON the drivers get, and streams each frame to **pixel outputs**: DDP, Art-Net, sACN (E1.31), or USB-DMX (Enttec Pro / Open DMX). Configure outputs in **Outputs** (edit mode) and add an output's name to a zone's devices.
- **Preset sequencer**: **Sequences** play timed chains of presets on a zone, switching both the pixel outputs and the zone's ESP32 drivers. Sequences resume after a restart.
- ESP32 firmware is unchanged; drivers still get presets + `select`.
CLI (run from `src/`):
```bash
python -m engine.cli --output "ddp://192.168.1.60?pixels=300" --test
python -m engine.cli --output "artnet://192.168.1.61?universe=0&pixels=170" --preset 16
python -m engine.cli --pattern rainbow --n1 2 --leds 60 # terminal preview
```
Tests: `pipenv run pytest tests/engine_tests`.
+1 -1
View File
@@ -1 +1 @@
{} {"188b0e1560a8": {"id": "188b0e1560a8", "name": "led-188b0e1560a8", "type": "led", "transport": "wifi", "address": "10.1.1.192", "default_pattern": null, "zones": []}, "f0f5bdfb9d30": {"id": "f0f5bdfb9d30", "name": "led-f0f5bdfb9d30", "type": "led", "transport": "wifi", "address": "10.1.1.232", "default_pattern": null, "zones": []}}
+1
View File
@@ -0,0 +1 @@
{}
+1 -54
View File
@@ -1,54 +1 @@
{ {"on": {"min_delay": 10, "max_delay": 10000, "max_colors": 1}, "off": {"min_delay": 10, "max_delay": 10000, "max_colors": 0}, "rainbow": {"n1": "Step Rate", "min_delay": 10, "max_delay": 10000, "max_colors": 0}, "colour_cycle": {"n1": "Step Rate", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "transition": {"min_delay": 10, "max_delay": 10000, "max_colors": 10}, "chase": {"n1": "Colour 1 Length", "n2": "Colour 2 Length", "n3": "Step 1", "n4": "Step 2", "min_delay": 10, "max_delay": 10000, "max_colors": 2}, "pulse": {"n1": "Attack", "n2": "Hold", "n3": "Decay", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "circle": {"n1": "Head Rate", "n2": "Max Length", "n3": "Tail Rate", "n4": "Min Length", "min_delay": 10, "max_delay": 10000, "max_colors": 2}, "blink": {"min_delay": 10, "max_delay": 10000, "max_colors": 10}, "flicker": {"n1": "Min brightness", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "flame": {"n1": "Min brightness", "n2": "Breath period (ms)", "n3": "Spark gap min (ms, 0=default 10\u201330 s, -1=off)", "n4": "Spark gap max (ms)", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "twinkle": {"n1": "Twinkle activity (1\u2013255, higher = more changes)", "n2": "Density (0\u2013255, higher = more of the strip lit)", "n3": "Min adjacent LEDs per twinkle (same as max for fixed length)", "n4": "Max adjacent LEDs per twinkle (same as min for fixed length)", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "radiate": {"n1": "Node spacing (LEDs)", "n2": "Out time (ms)", "n3": "In time (ms)", "min_delay": 10, "max_delay": 10000, "max_colors": 2}, "meteor_rain": {"n1": "Tail length", "n2": "Speed (LEDs per frame)", "n3": "Fade amount (1-255)", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "scanner": {"n1": "Eye width", "n2": "End pause (frames)", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "gradient_scroll": {"n1": "Scroll step rate", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "comet_dual": {"n1": "Tail length", "n2": "Speed", "n3": "Gap", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "sparkle_trail": {"n1": "Spark density", "n2": "Decay", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "wave": {"n1": "Wavelength", "n2": "Amplitude", "n3": "Drift speed", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "plasma": {"n1": "Scale", "n2": "Speed", "n3": "Contrast", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "segment_chase": {"n1": "Segment size", "n2": "Phase step", "n3": "Segment phase offset", "n4": "Gap per segment", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "bar_graph": {"n1": "Level percent", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "breathing_dual": {"n1": "Phase offset", "n2": "Ease", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "strobe_burst": {"n1": "Burst count", "n2": "Burst gap", "n3": "Cooldown", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "rain_drops": {"n1": "Drop rate", "n2": "Ripple width", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "fireflies": {"n1": "Count", "n2": "Twinkle speed", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "clock_sweep": {"n1": "Hand width", "n2": "Marker interval", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "marquee": {"n1": "On length", "n2": "Off length", "n3": "Step", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "aurora": {"n1": "Band count", "n2": "Shimmer", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "snowfall": {"n1": "Flake density", "n2": "Fall speed", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "heartbeat": {"n1": "Pulse 1 ms", "n2": "Pulse 2 ms", "n3": "Pause ms", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "orbit": {"n1": "Orbit count", "n2": "Base speed", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "palette_morph": {"n1": "Morph ms", "n2": "Warp rate", "n3": "Turbulence", "max_colors": 10, "min_delay": 10, "max_delay": 10000}}
"on": {
"min_delay": 10,
"max_delay": 10000,
"max_colors": 1
},
"off": {
"min_delay": 10,
"max_delay": 10000,
"max_colors": 0
},
"rainbow": {
"n1": "Step Rate",
"min_delay": 10,
"max_delay": 10000,
"max_colors": 0
},
"transition": {
"min_delay": 10,
"max_delay": 10000,
"max_colors": 10
},
"chase": {
"n1": "Colour 1 Length",
"n2": "Colour 2 Length",
"n3": "Step 1",
"n4": "Step 2",
"min_delay": 10,
"max_delay": 10000,
"max_colors": 2
},
"pulse": {
"n1": "Attack",
"n2": "Hold",
"n3": "Decay",
"min_delay": 10,
"max_delay": 10000,
"max_colors": 10
},
"circle": {
"n1": "Head Rate",
"n2": "Max Length",
"n3": "Tail Rate",
"n4": "Min Length",
"min_delay": 10,
"max_delay": 10000,
"max_colors": 2
},
"blink": {
"min_delay": 10,
"max_delay": 10000,
"max_colors": 10
}
}
+1 -1
View File
@@ -1 +1 @@
{"1": {"name": "on", "pattern": "on", "colors": ["#FFFFFF"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "2": {"name": "off", "pattern": "off", "colors": [], "brightness": 0, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "3": {"name": "rainbow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 100, "auto": true, "n1": 2, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "4": {"name": "transition", "pattern": "transition", "colors": ["#FF0000", "#00FF00", "#0000FF", "#FFFFFF", "#0000FF", "#FFFF00"], "brightness": 255, "delay": 5000, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null, null, null, 6, 2, 3]}, "5": {"name": "chase", "pattern": "chase", "colors": ["#FF0000", "#0000FF"], "brightness": 255, "delay": 200, "auto": true, "n1": 5, "n2": 5, "n3": 1, "n4": 1, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "6": {"name": "pulse", "pattern": "pulse", "colors": ["#00FF00"], "brightness": 255, "delay": 500, "auto": true, "n1": 1000, "n2": 500, "n3": 1000, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "7": {"name": "circle", "pattern": "circle", "colors": ["#FFA500", "#800080"], "brightness": 255, "delay": 200, "auto": true, "n1": 2, "n2": 10, "n3": 2, "n4": 5, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "8": {"name": "blink", "pattern": "blink", "colors": ["#FF0000", "#00FF00", "#0000FF", "#FFFF00"], "brightness": 255, "delay": 1000, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "9": {"name": "warm white", "pattern": "on", "colors": ["#FFF5E6"], "brightness": 200, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "10": {"name": "cool white", "pattern": "on", "colors": ["#E6F2FF"], "brightness": 200, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "11": {"name": "red", "pattern": "on", "colors": ["#FF0000"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "12": {"name": "blue", "pattern": "on", "colors": ["#0000FF"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "13": {"name": "rainbow slow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 150, "auto": true, "n1": 1, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "14": {"name": "pulse slow", "pattern": "pulse", "colors": ["#FF6600"], "brightness": 255, "delay": 800, "auto": true, "n1": 2000, "n2": 1000, "n3": 2000, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "15": {"name": "blink red green", "pattern": "blink", "colors": ["#FF0000", "#00FF00"], "brightness": 255, "delay": 500, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "30": {"name": "rainbow slow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 150, "auto": true, "n1": 1, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "31": {"name": "DJ Rainbow", "pattern": "rainbow", "colors": [], "brightness": 220, "delay": 60, "n1": 12, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "32": {"name": "DJ Single Color", "pattern": "on", "colors": ["#ff00ff"], "brightness": 220, "delay": 100, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "33": {"name": "DJ Transition", "pattern": "transition", "colors": ["#ff0000", "#00ff00", "#0000ff"], "brightness": 220, "delay": 250, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "34": {"name": "DJ Rainbow", "pattern": "rainbow", "colors": [], "brightness": 220, "delay": 60, "n1": 12, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "35": {"name": "DJ Single Color", "pattern": "on", "colors": ["#ff00ff"], "brightness": 220, "delay": 100, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "36": {"name": "DJ Transition", "pattern": "transition", "colors": ["#ff0000", "#00ff00", "#0000ff"], "brightness": 220, "delay": 250, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "37": {"name": "tranistion2", "pattern": "transition", "colors": ["#FF0000", "#FFFF00", "#FF00FF"], "brightness": 128, "delay": 1000, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [0, 3, 4]}} {"1": {"name": "on", "pattern": "on", "colors": ["#FFFFFF"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "2": {"name": "off", "pattern": "off", "colors": [], "brightness": 0, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "3": {"name": "rainbow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 100, "auto": true, "n1": 2, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "4": {"name": "transition", "pattern": "transition", "colors": ["#FF0000", "#00FF00", "#0000FF", "#FFFFFF", "#0000FF", "#FFFF00"], "brightness": 255, "delay": 5000, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null, null, null, 6, 2, 3]}, "5": {"name": "chase", "pattern": "chase", "colors": ["#FF0000", "#0000FF"], "brightness": 255, "delay": 200, "auto": true, "n1": 5, "n2": 5, "n3": 1, "n4": 1, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "6": {"name": "pulse", "pattern": "pulse", "colors": ["#00FF00"], "brightness": 255, "delay": 500, "auto": true, "n1": 1000, "n2": 500, "n3": 1000, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "7": {"name": "circle", "pattern": "circle", "colors": ["#FFA500", "#800080"], "brightness": 255, "delay": 200, "auto": true, "n1": 2, "n2": 10, "n3": 2, "n4": 5, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "8": {"name": "blink", "pattern": "blink", "colors": ["#FF0000", "#00FF00", "#0000FF", "#FFFF00"], "brightness": 255, "delay": 1000, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "9": {"name": "warm white", "pattern": "on", "colors": ["#FFF5E6"], "brightness": 200, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "10": {"name": "cool white", "pattern": "on", "colors": ["#E6F2FF"], "brightness": 200, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "11": {"name": "red", "pattern": "on", "colors": ["#FF0000"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "12": {"name": "blue", "pattern": "on", "colors": ["#0000FF"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "13": {"name": "rainbow slow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 150, "auto": true, "n1": 1, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "14": {"name": "pulse slow", "pattern": "pulse", "colors": ["#FF6600"], "brightness": 255, "delay": 800, "auto": true, "n1": 2000, "n2": 1000, "n3": 2000, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "15": {"name": "blink red green", "pattern": "blink", "colors": ["#FF0000", "#00FF00"], "brightness": 255, "delay": 500, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "30": {"name": "rainbow slow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 150, "auto": true, "n1": 1, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "31": {"name": "DJ Rainbow", "pattern": "rainbow", "colors": [], "brightness": 220, "delay": 60, "n1": 12, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "32": {"name": "DJ Single Color", "pattern": "on", "colors": ["#ff00ff"], "brightness": 220, "delay": 100, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "33": {"name": "DJ Transition", "pattern": "transition", "colors": ["#ff0000", "#00ff00", "#0000ff"], "brightness": 220, "delay": 250, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "34": {"name": "DJ Rainbow", "pattern": "rainbow", "colors": [], "brightness": 220, "delay": 60, "n1": 12, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "35": {"name": "DJ Single Color", "pattern": "on", "colors": ["#ff00ff"], "brightness": 220, "delay": 100, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "36": {"name": "DJ Transition", "pattern": "transition", "colors": ["#ff0000", "#00ff00", "#0000ff"], "brightness": 220, "delay": 250, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "37": {"name": "tranistion2", "pattern": "transition", "colors": ["#FF0000", "#FFFF00", "#FF00FF"], "brightness": 128, "delay": 1000, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [0, 3, 4]}, "38": {"name": "Colour Cycle", "pattern": "cLine truncated
BIN
View File
Binary file not shown.
+3
View File
@@ -0,0 +1,3 @@
PRST1xœ%ÎÁ
Â0Ð_‘ñšCSµJîæ'D$¶«␍ÄÝ’¦ˆˆÿntOovæ²opxz‘´zޱ ¦P
e®µp={I’g¸ÖÇηÞãlpÍñ>¦¹mÓ ” ÎþrXŠÀ•¼�[¸Zq«l”­²S:e¯þLYn1Ñ%õ‹Ï ¥/ï
+2
View File
@@ -0,0 +1,2 @@
PRST1xњ%ОAВ …б»<·,J5\Е4␍К $84SX4Ж»‹eхеНlюШЅ B
‹+…„ЫОЬж#§,+м␍‡@ЖЏIб.сщ*Lk{ЊЖ(xJnѓХГ аjЙ°E*)°†m';ЗО©c:зОҐsЭY$‡�hЋѕuиЅ*Qлљ…В?†kJУчП=5Я
+1
View File
@@ -0,0 +1 @@
PRST1xœ%ÎA л|·, ŠÐK˜ÆP;* ␍……1Þ݉3›—ÿÿf>àø"̹ ÖØU–¢°Ä[É¥nì¬Ü8b2˜kz<Ó&Ãà½ÁB9¾œµ±·‚Ðj'vRñ ì•ƒâ•£rRÎÖZî)Ó5-ò‡Ã÷yÒ-€
+2
View File
@@ -0,0 +1,2 @@
PRST1xœEÎÁ
Â0Ð_‘9ç`«Qɯˆ”Ô®ˆ»e“RDüwsðô˜™Ë¼ÁñIИx”uS²¬p˜c­¤ü¬»J-ç‹Ã¨éþ¨LÅrï½ÃD9¾:¿uˆK„ª 9pg¥Ñ#ØÂ»Æ¾á‡Æ±qú1«ÜR¦!Mö¡Ãç ��1
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ=ÎÝ
!†á[‰¯StK[¼€½‰ˆ°v*ÁTü!"º÷Ü¤Žžá�9˜¼¹4bu™VÙ…¢)…’ÿåVÎÁ…”¡÷XO“RœãÀpJöz+žr[ R2ÌäÌzäœÁÔ KªÄàE;àKõ´èÓæß¶Ð ²£:»Îø%¦p±ŽŽvn? ¼?�¨2ú
BIN
View File
Binary file not shown.
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœUÎÁ
Â0ЙsM5Uò+"²µ«â¦lSDÄwiNž³3‡ý@èɈPJ2–fª•Uþn×’‹.ˆ§³Ã¨éþ¨Â‹å>‡‰3½}×9ÐZ bÕ•ÄÛÀè­‘]cß�¡qh7f-·”ù’&ûÁãûF9/.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœEÎÁ
Â0Ð_‘9ç`«Qɯˆ”Ô®ˆ»e“RDüwsðô˜™Ë¼ÁñIИx”uS²¬p˜c­¤ü¬»J-ç‹Ã¨éþ¨LÅrï½ÃD9¾:¿uˆK„ª 9pg¥Ñ#ØÂ»Æ¾á‡Æ±qú1«ÜR¦!Mö¡Çç �“1
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ%ͽÂ0 àW©Ž5C~•&VÆ
¡@�)uª4K…xwR<}ç»Á° —ks <DjÎ)¦ …É•B™ë–¸ž¯µža;l¼×Ú{Üž9 ïÂ4×Á­ÐSt l«kævÅ[a'ì…ƒpN¦œ|ˆô}ýmðý‡-‰
+1
View File
@@ -0,0 +1 @@
PRST1xœMÎ1! †á¿b¾[=5ÌNÎnÆô@I°\€Åÿ»Å.²<oÚ¼Aîéa±?,ŽÅQ�-f‚ÂìZó…xÓþÇ·œr©°' !h~<´î-Õg…k‰÷G#_ùØ­0ùä^Ü#7-a;FX ka6ÂVØý˜K1ùKœø_Ÿ/ÐM4y
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ%ͽÂ0 àW©Ž5C~•&VÆ
¡@�)uª4K…xwR<}ç»Á° —ks <DjÎ)¦ …É•B™ë–¸ž¯µža;l¼×Ú{Üž9 ïÂ4×Á­ÐSt l«kævÅ[a'ì…ƒpN¦œ|ˆô}ýmðý‡-‰
+1
View File
@@ -0,0 +1 @@
PRST1xœMÎ1! †á¿b¾[=5ÌNÎnÆô@I°\€Åÿ»Å.²<oÚ¼Aîéa±?,ŽÅQ�-f‚ÂìZó…xÓþÇ·œr©°' !h~<´î-Õg…k‰÷G#_ùØ­0ùä^Ü#7-a;FX ka6ÂVØý˜K1ùKœø_Ÿ/ÐM4y
BIN
View File
Binary file not shown.
BIN
View File
Binary file not shown.
+3
View File
@@ -0,0 +1,3 @@
PRST1xœUÎÁ‚0„áw¯=¤jú*†�
[m\[²”ƒ1¾»…ž<}ÉÌåÿ ºÁÂsŸ$P˜]Î$ño'Y`¯88ÒÚ{ô
7 ÷GŽ´”£5Fa"voX£Üšl–•bÛè2ÆvãXé*¦rªœ+—�Y’LC˜JM³·1•ºAÈo5qeî¿?ªð9±
BIN
View File
Binary file not shown.
+4
View File
@@ -0,0 +1,4 @@
PRST1xśMÎÁ‚0„áwŻ=$ű*†�
[%Y[RÚ1ľ»…^<}ÉĚĺ˙Ŕ™7�`ĺPa51rpËäŇ␍tÇĹÚ©×�Â#,ĎWtĽĺŁŞ{…™Ĺě V+�=(†Ä
®5m¶՝ίk@×B[č
·B˛oáq™sMu¶ çş1°=z\ľ?µ¦8>
+2
View File
@@ -0,0 +1,2 @@
PRST1xśmŹÁ‚0 †ßĄ\wČ`ŮMQ^Â2ĄčâÜČ1ĆřînĚ‹‰—~í—?Mű#ďüC™›F 0IďŃ™w¶ÚşÄ˛š7Ľm�ËĺMęveýuUąo<v[şć:'§.Wop
Ć ¨ĺDN)ąx » �<H¤)B2r"˘Śá@–Ć*ˇNŕ+&gGĄ±WC8<_ßĐéŽńpłhMţ”îýŹ!I°
+2
View File
@@ -0,0 +1,2 @@
PRST1xњUЋ;В0птТєp>°WAQґђ5X2Nд8BЬ;©hv¤·SМЃ_BдЙq(,њ’Др·Эg?ЗtEЕЅЦЦж­ТZіf
·иПdНJcЊВ$ћЯ “ЮТ Jq…PѓЪј…t)ПР‚є] ЁАињњw,q¶ОЛи¦\Wп­^rнЕ–є°yЇКѕ?Эh>Ў
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœEÎM
Â0à«Ès›Eÿ¢’ôE$¶£â¤$Ó…ˆww0 góÁ{o1o°„ŠìÊì™)Ã`õ"”Y‹6§˜r�›°ÇFgƒk÷‡0-:k␍Šþ×7~“'y#ná¥Ó™ÒÃ逇Э*ÇÊéÇšÓ-Dº„Eiñù¹L2‡
+3
View File
@@ -0,0 +1,3 @@
PRST1xœ=ŽA‚0E¯B>Û.
*š€KC*ŒØ¤¶¤Æxw�Í{™7‹y!ØÁ€)s5';9
\å1Eï¡°XfJA~mø·1ú˜2ÌußkÙÕZo^ls\®ÉÍw”å¸mµÂDÞ>a:Q»r„á´’Bh¤ Z)aW°/8tÇ‚ÓKŠ7çip“üÙàý)<¡
+3
View File
@@ -0,0 +1,3 @@
PRST1xś-ÎÁ‚0Đ_!õ‡Šdo˝ô'Ś!Ş’”–”ĺ`Ś˙î<˝ÍĚö�čfű•‹!Íž‹qs
‹cö9J·Çý?RHy]QZkŚÖ’•Zc-n
÷<=_ý*“Zk…Ń÷µrşŤ�óćbę„T ␍¨N ŮĹóA{p9čv–śSđý4Ęcľ?6Đ
+2
View File
@@ -0,0 +1,2 @@
PRST1x�5־A‚0…ב«�ַ¶ @Dׂ- —0ֶT©�X[2ֶxwG׳ש&‎»˜‚yXh°M\₪�׀��‚ֹ8…�0[
’ור/חט#%ט=ֺ¾†q”·r\…¹כ�ƒMע¥©*…ֹzף„מd5 Gh¦ֵ*„Zz+6b-1l ¿´™m¦ֻל2‎ֺLסגה"7ֹy5�־ד:G
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ-ÎÁ Ð_1ã•ÔZŽúÆ´«’ 4°Õã¿»Š§7;sÙ¢»,˜
/îNP˜3å(í¿8¥�r�Ýa©õ¶ìŽÙ_®©ÈÐh­0RpOØN¢›9ÁržI!XÓˆ�ØËW„ö{­+]eSéL9�} ƒåƒ÷ªù0¿
+2
View File
@@ -0,0 +1,2 @@
PRST1x�=ЮA
Т0аЋШw�EZ5JаK�б�ZH��L"онС�Ћ7ќџѓFЄ�с!\e�е�`�I�KдќнRHЅТ�и�ЕЮсlp-ѓу)�ЋНЕzС;=i�/ee�иiІє:Sv�=МютЁсЧЦщG.щ>ОЬ�Овсѓ,�1И
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ5ÎA‚0Ы�϶‹‚ˆ¦è%Œ!F �–´ÃÂïîhu6o2ÿ/æ ïV‚Sâ"Ѹ’碟\"(lŽ™¢—ø—tÿ¤Kˆ æ‚ÒZ-#·ò£µ¸*Üâ<Nì)I¥ÖZa Å=`ZYÝΆãN
¾‚i„¦0RðMæ˜i3§ÌùËÃ}^¨›ù­Âë␍Çü8÷
BIN
View File
Binary file not shown.
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ5Î=Â0 †á«Tk†þQ�À%*T%Ô@¥’TŽ; ÄÝIáå±ôzðÞ¾å¨ET Ž ·JT,V•ŧšÃð·0‰ ‡Ë>¸8™OõS¨ËÒ`äÙ¾A]Zíª¤²²�¯@M¢ÎÉ7 v;÷-hã˜é2§Ìyg‘pŸf¦1ýTáû^
7˜
+3
View File
@@ -0,0 +1,3 @@
PRST1x�5ΞΝ
Β0ΰW)γ5‡ώh­Ήϊ"%ΪU5)›νAΔww5xϊ–™9μ Α=BI
v>Η%Α`q"ΔA»o<ώγK�#'Ψ#6‡²ο†'ƒ3ϋΫ]%-κ²4�hvOΨVO·J„^Ι T°M­Φ��ΐκ"l3»L›ΩgΊ Η«�iτ“ώSαύ��5%
+4
View File
@@ -0,0 +1,4 @@
PRST1xœMαÂ0 Ð_A×5CZ ´™Q~!¨ ‘BR%î€ÿŽE¦gÝÝà7¢{ ˜
ofŸiž
ÇL9JõŸÞRH¹ÀœÐX{Ô½–¬µµ£ÆYášýýÁ‘ŠL:­&
îÓËéVN0œWRˆ­dB3[Ä]e_é+‡ÊðcÉiö�.~’¿Z|¾¡ 61
+1
View File
@@ -0,0 +1 @@
PRST1xœ5ŽAƒ E¯b¾[¨U+WiŒ¡2¶¦ `š¦éÝ ’nxÌ›Y¼Œ|ùPÌÚÎ�¿ˆ60l2r&.?ýýlµuâ‚Rõ|àCt%Wuß5®n½Ýƒ!OjÎiùN¹ ÜN ¦‚¨¢35DÑ@¤é”Ñft}ÆùÀæì²jšVÓª#TSL�-)ËìZ³ôŒßQ•AÓ
+1
View File
@@ -0,0 +1 @@
PRST1xњEО1В0 Р« ПљЎiЎ ЂK „5)MЪФвоXНЂ—gщяБD72В‹lF—зВ ѓЙ‰pЋьoчR^@glOлаbpЛющ’И‹mУ ЬФлкЉ$ђдВС‚:ҐХљТЃ¬Іi/о+}еP9®L9=|а«ф‹пжg2д
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ=ÎÍ
Â0àW‘é5‡ô?ìM"} ‰vÕBMJ’D|wSž¾afû†5O!rˆ;³zç␍#{›úuu³ótDQi­”N]ÑÊ^␍Öö²•�“ÀÅO÷G´Òq%¥Àȳy�ºÍ(ú•l ª¨I“­AM¦Ít™>£~,Þݦ™ÏÓ˜þ+ñùÚ¦5ó
+3
View File
@@ -0,0 +1,3 @@
PRST1x°Mна
б0 ЮW▒вз╘SzTЯ%D╓╨L╣m├┬ЬНfКе\╬ДOЫ ╦'а┌)С"┤ЬЙ°ВP3╔ ⌡©П}LЖ└Й8≈dуNЖр²╝╘©?8P√⌠Zk┘√╪{ц6р╨▒#,╖▒┌≥Жb␍k└%Л4╜
КBSь╤3C┼]ОИр╥Р≈аВ┘┘6
+2
View File
@@ -0,0 +1,2 @@
PRST1xœMÎK
Â0…á½§ÜT£’tR$Ú«âMÉc âÞm�ˆ£þ39Oˆ»3,¦2Car¥p’¿rŽ!¦ {ÀЍï‰0(œ’¿ÞŠpž‡Î…‘ƒ{À"WK„-©²‚hXMK•î;Ëú—6° ¦±mìûSŠøèÇù’Æë␍»0Ø
+4
View File
@@ -0,0 +1,4 @@
PRST1xœMÎA‚0Ы˜ï¶‹RÉ€KcŠŒBR[Ò c¼»­l\½Éÿùɼáí“ANr˜ÙFÙ
V+ÂÑçê?½b␍8ö½éj�‹Â—Ç,žS.ŒÖ
;ûµù´›�Ä�|ªL½uŨ)_ƒ
ÍN»sÞé~¬1ÜÇ×eÊ/Uø|Æœ5
BIN
View File
Binary file not shown.
+3
View File
@@ -0,0 +1,3 @@
PRST1xœ5ŽA‚0E¯B>Û.
*š€KCªŒBRÚ¦ c¼»ÅÙ¼7óÿb>ðv"0Í\D눙Š)¤8@!ZÙ’—xOºò.¤抲mµŒÜJ­W϶:n
÷4¾ö4K¹ÖZ¡'gß0�¨]8ÀpZHÁW0ÕVðõÞô˜ÇŒSF“qθlˆ)<GGÝØË«¾?ð¹<
+3
View File
@@ -0,0 +1,3 @@
PRST1xœMŽ1Â0 Eïò»fp
�(K/�
­�H!©Òt@ˆ»cÈÂô¾Ÿ¿%¿�üƒá0†2F†Âìkå’þÕ˜c. ÜÝ0 ‘¸Î‘%œ.%Üî5ñ"•Þ…‰£J&RðkÍpµ¬¬�´HA§e•6mÜÂÉQ2p_¹kØ7Øæ’¯!ò9Lò–Æû¼Ã1ó
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ%ÎK
Ã0 Ы”éÖ‹$ýâ«”ÜFn Ž›PJï^ÇÖæI£Í|Áf&hlFæÃ6¹HPXLŒ$œãÀù|d…~àhË WxŠ{O‘iÍ�®iFòæÝî»I1@GI¤À-tޏ«œ*çÊ¥r­Ü*÷Â"Á:Oƒs�¶´ò”{␍Bv/ÃÉûþ÷½8ù
+1 -1
View File
@@ -1 +1 @@
{"1": {"name": "default", "type": "tabs", "tabs": ["1", "8"], "scenes": [], "palette_id": "1"}, "2": {"name": "test", "type": "tabs", "tabs": ["6", "7"], "scenes": [], "palette_id": "12"}} {"1": {"name": "default", "type": "zones", "zones": ["1", "8"], "scenes": [], "palette_id": "1"}, "2": {"name": "test", "type": "zones", "zones": ["6", "7"], "scenes": [], "palette_id": "12"}}
+1 -1
View File
@@ -1 +1 @@
{"1": {"group_name": "Main Group", "presets": ["1", "2"], "sequence_duration": 3000, "sequence_transition": 500, "sequence_loop": true, "sequence_repeat_count": 0, "sequence_active": false, "sequence_index": 0, "sequence_start_time": 0}, "2": {"group_name": "Accent Group", "presets": ["2", "3"], "sequence_duration": 2000, "sequence_transition": 300, "sequence_loop": true, "sequence_repeat_count": 0, "sequence_active": false, "sequence_index": 0, "sequence_start_time": 0}} {"1": {"name": "Main Group", "zone_id": null, "loop": true, "repeat_count": 0, "steps": [{"preset_id": "1", "duration_s": 3.0}, {"preset_id": "2", "duration_s": 3.0}], "active": false}, "2": {"name": "Accent Group", "zone_id": null, "loop": true, "repeat_count": 0, "steps": [{"preset_id": "2", "duration_s": 2.0}, {"preset_id": "3", "duration_s": 2.0}], "active": false}}
-1
View File
@@ -1 +0,0 @@
{"1": {"name": "default", "names": ["1", "2", "3", "4", "5", "6", "7", "8", "0", "a"], "presets": [["4", "2", "7"], ["15", "3", "14"], ["5", "8", "10"], ["11", "9", "12"], ["1", "13", "37"]], "presets_flat": ["4", "2", "7", "15", "3", "14", "5", "8", "10", "11", "9", "12", "1", "13", "37"], "default_preset": "4"}, "2": {"name": "default", "names": ["1", "2", "3", "4", "5", "6", "7", "8", "0", "a"], "presets": [["16", "17", "18"], ["19", "20", "21"], ["22", "23", "24"], ["25", "26", "27"], ["28", "29", "30"]], "presets_flat": ["16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30"]}, "3": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "4": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "5": {"name": "dj", "names": ["dj"], "presets": [["31", "32", "33"]], "default_preset": "31", "presets_flat": ["31", "32", "33"]}, "6": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "7": {"name": "dj", "names": ["dj"], "presets": [["34", "35", "36"]], "default_preset": "34", "presets_flat": ["34", "35", "36"]}, "8": {"name": "test", "names": ["11"], "presets": [["1", "2", "3"], ["4", "5"]], "default_preset": "1", "presets_flat": ["1", "2", "3", "4", "5"]}}
+1
View File
@@ -0,0 +1 @@
{"1": {"name": "default", "names": ["led-188b0e1560a8", "led-f0f5bdfb9d30"], "presets": [["4", "2", "7"], ["3", "14", "5"], ["8", "9", "1"], ["6", "38", "42"], ["39", "40", "41"], ["43", "44", "45"], ["46", "47", "48"], ["49", "50", "51"], ["52", "53", "54"], ["55", "56", "57"], ["58", "59", "60"], ["61", "62"]], "presets_flat": ["4", "2", "7", "3", "14", "5", "8", "9", "1", "6", "38", "42", "39", "40", "41", "43", "44", "45", "46", "47", "48", "49", "50", "51", "52", "53", "54", "55", "56", "57", "58", "59", "60", "61", "62"], "default_preset": "41"}, "2": {"name": "default", "names": ["1", "2", "3", "4", "5", "6", "7", "8", "0", "a"], "presets": [["16", "17", "18"], ["19", "20", "21"], ["22", "23", "24"], ["25", "26", "27"], ["28", "29", "30"]], "presets_flat": ["16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30"]}, "3": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "4": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "5": {"name": "dj", "names": ["dj"], "presets": [["31", "32", "33"]], "default_preset": "31", "presets_flat": ["31", "32", "33"]}, "6": {"name": "default", "names": ["1"], "presets": [], "default_preset": null, "presets_flat": []}, "7": {"name": "dj", "names": ["dj"], "presets": [["34", "35", "36"]], "default_preset": "34", "presets_flat": ["34", "35", "36"]}, "8": {"name": "test", "names": ["led-188b0e1560a8"], "presets": [["1", "2", "3"], ["4", "5"]], "default_preset": "1", "presets_flat": ["1", "2", "3", "4", "5"]}}
-53
View File
@@ -1,53 +0,0 @@
#!/usr/bin/env python3
import subprocess
import serial
import sys
print(sys.argv)
# Extract port (first arg if it's not a command)
commands = ["src", "lib", "ls", "reset", "follow", "db"]
port = None
if len(sys.argv) > 1 and sys.argv[1] not in commands:
port = sys.argv[1]
for cmd in sys.argv[1:]:
print(cmd)
match cmd:
case "src":
if port:
subprocess.call(["mpremote", "connect", port, "fs", "cp", "-r", ".", ":" ], cwd="src")
else:
print("Error: Port required for 'src' command")
case "lib":
if port:
subprocess.call(["mpremote", "connect", port, "fs", "cp", "-r", "lib", ":" ])
else:
print("Error: Port required for 'lib' command")
case "ls":
if port:
subprocess.call(["mpremote", "connect", port, "fs", "ls", ":" ])
else:
print("Error: Port required for 'ls' command")
case "reset":
if port:
with serial.Serial(port, baudrate=115200) as ser:
ser.write(b'\x03\x03\x04')
else:
print("Error: Port required for 'reset' command")
case "follow":
if port:
with serial.Serial(port, baudrate=115200) as ser:
while True:
if ser.in_waiting > 0: # Check if there is data in the buffer
data = ser.readline().decode('utf-8').strip() # Read and decode the data
print(data)
else:
print("Error: Port required for 'follow' command")
case "db":
if port:
subprocess.call(["mpremote", "connect", port, "fs", "cp", "-r", "db", ":" ])
else:
print("Error: Port required for 'db' command")
+116 -28
View File
@@ -2,10 +2,12 @@
This document covers: This document covers:
1. **HTTP and WebSocket** exposed by the Raspberry Pi app (`src/main.py`) — profiles, presets, transport send, and related resources. 1. **HTTP and WebSocket** exposed by the Raspberry Pi app (`src/main.py`) — profiles, zones, presets, transport send, pattern OTA helpers, and related resources.
2. **LED driver JSON** — the compact message format sent over the serial→ESP-NOW bridge to devices (same logical API as ESP-NOW payloads). 2. **LED driver JSON** — the compact **v1** message format. It is sent over the **serial → ESP-NOW bridge** to ESP32 peers and as **single JSON text messages** over the **outbound WebSocket** to **Wi-Fi** drivers (same logical fields).
Default listen address: `0.0.0.0`. Port defaults to **80**; override with the `PORT` environment variable (see `pipenv run run`). Default HTTP listen address: `0.0.0.0`. Port defaults to **80**; override with the **`PORT`** environment variable (see `pipenv run run`).
**Serial:** UART path and baud come from settings (defaults include `serial_port` such as `/dev/ttyS0` and `serial_baudrate`). **Wi-Fi drivers:** **UDP** on port **8766** is the **discovery** channel: each driver’s JSON hello (**`device_name`**, **MAC**, optional **`type`**) **creates or updates** that device in **`db/device.json`** (keyed by MAC); the Pi echoes the datagram. After a valid hello with **`v`:** **`"1"`**, the Pi also opens an **outbound WebSocket** to that IP (**`wifi_driver_ws_port`**, default **80**; **`wifi_driver_ws_path`**, default **`/ws`**) for v1 commands; presets are not pushed automatically on connect (use **Send Presets** / profile apply). The Pi may send periodic UDP **hello** nudges to known Wi‑Fi device IPs when the WebSocket is down (**`wifi_driver_hello_interval_s`** in settings).
All JSON APIs use `Content-Type: application/json` for bodies and responses unless noted. All JSON APIs use `Content-Type: application/json` for bodies and responses unless noted.
@@ -15,8 +17,8 @@ All JSON APIs use `Content-Type: application/json` for bodies and responses unle
The main UI has two modes controlled by the mode toggle: The main UI has two modes controlled by the mode toggle:
- **Run mode**: optimized for operation (tab/preset selection and profile apply). - **Run mode**: optimized for operation (zone/preset selection and profile apply).
- **Edit mode**: shows editing/management controls (tabs, presets, patterns, colour palette, send presets, and profile management actions). - **Edit mode**: shows editing/management controls (zones, presets, patterns, colour palette, send presets, profile management actions, **Devices** registry for LED driver names/MACs, and related tools).
Profiles are available in both modes, but behavior differs: Profiles are available in both modes, but behavior differs:
@@ -40,7 +42,7 @@ Profiles are selected with **`POST /profiles/<id>/apply`**, which sets `current_
| Method | Path | Description | | Method | Path | Description |
|--------|------|-------------| |--------|------|-------------|
| GET | `/` | Main UI (`templates/index.html`) | | GET | `/` | Main UI (`templates/index.html`) |
| GET | `/settings` | Settings page (`templates/settings.html`) | | GET | `/settings/page` | Standalone settings page (`templates/settings.html`) |
| GET | `/favicon.ico` | Empty response (204) | | GET | `/favicon.ico` | Empty response (204) |
| GET | `/static/<path>` | Static files under `src/static/` | | GET | `/static/<path>` | Static files under `src/static/` |
@@ -50,10 +52,12 @@ Profiles are selected with **`POST /profiles/<id>/apply`**, which sets `current_
Connect to **`ws://<host>:<port>/ws`**. Connect to **`ws://<host>:<port>/ws`**.
- Send **JSON**: the object is forwarded to the transport (serial bridge → ESP-NOW) as JSON. Optional key **`to`**: 12-character hex MAC address; if present it is removed from the object and the payload is sent to that peer; otherwise the default destination is used. - Send **JSON**: the object is forwarded through the **serial sender** (6-byte MAC prefix + payload to the ESP-NOW bridge). Optional key **`to`**: 12-character hex MAC address; if present it is removed from the object and the payload is sent to that peer; otherwise the default destination from settings is used.
- Send **non-JSON text**: forwarded as raw bytes with the default address. - Send **non-JSON text**: forwarded as raw bytes with the default address.
- On send failure, the server may reply with `{"error": "Send failed"}`. - On send failure, the server may reply with `{"error": "Send failed"}`.
Wi-Fi devices are not targeted by `/ws` directly; use **`POST /presets/send`**, device routes, or **`POST /patterns/<name>/send`** as appropriate.
--- ---
## HTTP API by resource ## HTTP API by resource
@@ -68,7 +72,30 @@ Below, `<id>` values are string identifiers used by the JSON stores (numeric str
| PUT | `/settings/settings` | Merge keys into settings and save. Returns `{"message": "Settings updated successfully"}`. | | PUT | `/settings/settings` | Merge keys into settings and save. Returns `{"message": "Settings updated successfully"}`. |
| GET | `/settings/wifi/ap` | Saved Wi‑Fi AP fields: `saved_ssid`, `saved_password`, `saved_channel`, `active` (Pi: `active` is always false). | | GET | `/settings/wifi/ap` | Saved Wi‑Fi AP fields: `saved_ssid`, `saved_password`, `saved_channel`, `active` (Pi: `active` is always false). |
| POST | `/settings/wifi/ap` | Body: `ssid` (required), `password`, `channel` (1–11). Persists AP-related settings. | | POST | `/settings/wifi/ap` | Body: `ssid` (required), `password`, `channel` (1–11). Persists AP-related settings. |
| GET | `/settings/page` | Serves `templates/settings.html` (same page as `GET /settings` from the root app, for convenience). | | GET | `/settings/page` | Serves `templates/settings.html`. |
### Devices — `/devices`
Registry in `db/device.json`: storage key **`<id>`** (string, e.g. `"1"`) maps to an object that always includes:
| Field | Description |
|-------|-------------|
| **`id`** | Same as the storage key (stable handle for URLs). |
| **`name`** | Shown in the UI and used in `select` keys. |
| **`type`** | `led` (only value today; extensible). |
| **`transport`** | `espnow` or `wifi`. |
| **`address`** | For **`espnow`**: optional 12-character lowercase hex MAC. For **`wifi`**: optional IP or hostname string. |
| **`default_pattern`**, **`zones`** | Optional. Legacy **`tabs`** may still appear in old files and is migrated away on load. |
Existing records without `type` / `transport` / `id` are backfilled on load (`led`, `espnow`, and `id` = key).
| Method | Path | Description |
|--------|------|-------------|
| GET | `/devices` | Map of device id → device object. |
| GET | `/devices/<id>` | One device, 404 if missing. |
| POST | `/devices` | Create. Body: **`name`** (required), **`type`** (default `led`), **`transport`** (default `espnow`), optional **`address`**, **`default_pattern`**, **`zones`**. Returns `{ "<id>": { ... } }`, 201. |
| PUT | `/devices/<id>` | Partial update. **`name`** cannot be cleared. **`id`** in the body is ignored. **`type`** / **`transport`** validated; **`address`** normalised for the resulting transport. |
| DELETE | `/devices/<id>` | Remove device. |
### Profiles — `/profiles` ### Profiles — `/profiles`
@@ -77,9 +104,9 @@ Below, `<id>` values are string identifiers used by the JSON stores (numeric str
| GET | `/profiles` | `{"profiles": {...}, "current_profile_id": "<id>"}`. Ensures a default current profile when possible. | | GET | `/profiles` | `{"profiles": {...}, "current_profile_id": "<id>"}`. Ensures a default current profile when possible. |
| GET | `/profiles/current` | `{"id": "...", "profile": {...}}` | | GET | `/profiles/current` | `{"id": "...", "profile": {...}}` |
| GET | `/profiles/<id>` | Single profile. If `<id>` is `current`, same as `/profiles/current`. | | GET | `/profiles/<id>` | Single profile. If `<id>` is `current`, same as `/profiles/current`. |
| POST | `/profiles` | Create profile. Body may include `name` and other fields. Optional `seed_dj_tab` (request-only) seeds a DJ tab + presets. New profiles always get a populated `default` tab. Returns `{ "<id>": { ... } }` with status 201. | | POST | `/profiles` | Create profile. Body may include `name` and other fields. Optional `seed_dj_zone` (request-only) seeds a DJ zone + presets. New profiles always get a populated `default` zone. Returns `{ "<id>": { ... } }` with status 201. |
| POST | `/profiles/<id>/apply` | Sets session current profile to `<id>`. | | POST | `/profiles/<id>/apply` | Sets session current profile to `<id>`. |
| POST | `/profiles/<id>/clone` | Clone profile (tabs, palettes, presets). Body may include `name`. | | POST | `/profiles/<id>/clone` | Clone profile (zones, palettes, presets). Body may include `name`. |
| PUT | `/profiles/current` | Update the current profile (from session). | | PUT | `/profiles/current` | Update the current profile (from session). |
| PUT | `/profiles/<id>` | Update profile by id. | | PUT | `/profiles/<id>` | Update profile by id. |
| DELETE | `/profiles/<id>` | Delete profile. | | DELETE | `/profiles/<id>` | Delete profile. |
@@ -120,18 +147,21 @@ Stored preset records can include:
- `colors`: resolved hex colours for editor/display. - `colors`: resolved hex colours for editor/display.
- `palette_refs`: optional array of palette indexes parallel to `colors`. If a slot contains an integer index, the colour is linked to the current profile palette at that index. - `palette_refs`: optional array of palette indexes parallel to `colors`. If a slot contains an integer index, the colour is linked to the current profile palette at that index.
### Tabs — `/tabs` ### Zones — `/zones`
| Method | Path | Description | | Method | Path | Description |
|--------|------|-------------| |--------|------|-------------|
| GET | `/tabs` | `tabs`, `tab_order`, `current_tab_id`, `profile_id` for the session-backed profile. | | GET | `/zones` | `zones` (map of zone id → zone object), `zone_order`, `current_zone_id`, `profile_id` for the session-backed profile. |
| GET | `/tabs/current` | Current tab from cookie/session. | | GET | `/zones/current` | Current zone from cookie/session. |
| POST | `/tabs` | Create tab; optional JSON `name`, `names`, `presets`; can append to current profile’s tab list. | | POST | `/zones` | Create zone; optional JSON `name`, `names`, `presets`; can append to current profile’s zone list. |
| GET | `/tabs/<id>` | Tab JSON. | | GET | `/zones/<id>` | Zone JSON. |
| PUT | `/tabs/<id>` | Update tab. | | PUT | `/zones/<id>` | Update zone. |
| DELETE | `/tabs/<id>` | Delete tab; can delete `current` to remove the active tab; updates profile tab list. | | DELETE | `/zones/<id>` | Delete zone; can delete `current` to remove the active zone; updates profile zone list. |
| POST | `/tabs/<id>/set-current` | Sets `current_tab` cookie. | | POST | `/zones/<id>/set-current` | Sets `current_zone` cookie. |
| POST | `/tabs/<id>/clone` | Clone tab into current profile. | | POST | `/zones/<id>/clone` | Clone zone into current profile. |
| POST | `/zones/<id>/play` | Body **`{"preset_id": "16", "drivers": true}`**. Runs the preset on every target in the zone through the Pi engine: pixel **outputs** are rendered on the Pi, ESP32 drivers get the preset + `select` (skipped when **`drivers`** is `false`; the UI sends to drivers itself and passes `false`). Stops any sequence on the zone. Returns the zone's player status. |
| POST | `/zones/<id>/stop` | Stops the zone's sequence and Pi rendering (pixel outputs go black). ESP32 drivers keep their current preset. |
| GET | `/zones/engine/status` | Engine state: `zones` (per-zone player: preset, pattern, error, per-output frame/packet/error counters) and `sequences`. |
### Palettes — `/palettes` ### Palettes — `/palettes`
@@ -163,32 +193,90 @@ Stored preset records can include:
| PUT | `/scenes/<id>` | Update. | | PUT | `/scenes/<id>` | Update. |
| DELETE | `/scenes/<id>` | Delete. | | DELETE | `/scenes/<id>` | Delete. |
### Scene playback
| Method | Path | Description |
|--------|------|-------------|
| POST | `/scenes/<id>/play` | Starts every sequence listed in the scene's `sequences`. Returns `started` ids and per-sequence `errors`. |
| POST | `/scenes/<id>/stop` | Stops the scene's sequences. |
### Sequences — `/sequences` ### Sequences — `/sequences`
Timed preset chains for one zone, run by the Pi engine (hard cuts). Stored in **`db/sequence.json`**:
```json
{"name": "Showcase", "zone_id": "2", "loop": true, "repeat_count": 0,
"steps": [{"preset_id": "16", "duration_s": 8}, {"preset_id": "17", "duration_s": 8}],
"active": false}
```
`duration_s` is clamped to 0.5–600 (default 5). `repeat_count` counts passes when `loop` is true (0 = forever). `active` is maintained by the engine; active sequences resume after a restart. Legacy records (`group_name`, `presets`, `sequence_duration` in ms) are migrated on load.
| Method | Path | Description | | Method | Path | Description |
|--------|------|-------------| |--------|------|-------------|
| GET | `/sequences` | All sequences. | | GET | `/sequences` | All sequences. |
| GET | `/sequences/status` | Runtime state per sequence: `zone_id`, `step_index`, `preset_id`, `pass`, `next_at`, `running`, optional `error`. |
| GET | `/sequences/<id>` | One sequence. | | GET | `/sequences/<id>` | One sequence. |
| POST | `/sequences` | Create; may use `group_name`, `presets` in body. | | POST | `/sequences` | Create (body as above). 400 on invalid steps. |
| PUT | `/sequences/<id>` | Update. | | PUT | `/sequences/<id>` | Update (merged, then re-validated). |
| DELETE | `/sequences/<id>` | Delete. | | DELETE | `/sequences/<id>` | Stop if running, then delete. |
| POST | `/sequences/<id>/play` | Start on its zone; replaces a sequence already running there. 400 without `zone_id`/steps. |
| POST | `/sequences/<id>/stop` | Stop; the zone keeps its current preset. |
### Patterns — `/patterns` Picking a preset manually on a zone (`/zones/<id>/play`) stops that zone's sequence.
### Outputs — `/outputs`
Pixel outputs the Pi renders frames for, stored in **`db/output.json`**. A zone drives an output when the output's **`name`** appears in the zone's `names` (the same list that holds ESP32 device names).
| Field | Notes |
|-------|-------|
| `name` | Matched against zone `names`. |
| `protocol` | `ddp` (UDP 4048), `artnet` (ArtDMX, UDP 6454), `sacn` (E1.31, UDP 5568), `dmx_serial` (USB-DMX). |
| `host`, `port` | Network outputs. `ddp` needs a host; Art-Net without host broadcasts; sACN without host uses multicast `239.255.<hi>.<lo>`. Blank port = protocol default. |
| `universe` | Art-Net/sACN start universe (sACN 1–63999). 170 RGB pixels per universe; consecutive universes are used for longer strips. |
| `serial_port`, `dmx_mode`, `channel` | USB-DMX: `enttec_pro` (Enttec DMX USB Pro) or `open_dmx` (FTDI); start channel 1–512; one universe max. |
| `pixel_count`, `pixel_offset` | Pixels this output takes from the zone frame, starting at `pixel_offset`. Outputs at offset 0 mirror the frame start. |
| `color_order`, `reverse`, `brightness`, `fps`, `enabled` | Per-output wiring order, direction, 0–255 brightness (× global brightness), frame-rate cap (default 40). |
| Method | Path | Description | | Method | Path | Description |
|--------|------|-------------| |--------|------|-------------|
| GET | `/patterns/definitions` | Contents of `pattern.json` (pattern metadata for the UI). | | GET | `/outputs` | All outputs. |
| GET | `/patterns` | All pattern records. | | GET | `/outputs/<id>` | One output. |
| GET | `/patterns/<id>` | One pattern. | | POST | `/outputs` | Create; 400 with `error` on validation failure. |
| PUT | `/outputs/<id>` | Update. |
| DELETE | `/outputs/<id>` | Delete. |
| POST | `/outputs/<id>/test` | Sends red, green, blue, white (optional body `step_s`, default 1 s each) then black. Returns per-output counters. |
### Patterns — `/patterns`
Pattern metadata lives in **`db/pattern.json`**; driver source files live under **`led-driver/src/patterns/`**. Several routes expose a **runtime map** (metadata merged with on-disk `.py` names so new files appear in menus).
| Method | Path | Description |
|--------|------|-------------|
| GET | `/patterns` | Runtime pattern map (object keyed by pattern id). |
| GET | `/patterns/definitions` | Same runtime map (intended for UI “definitions” clients). |
| GET | `/patterns/ota/manifest` | JSON `{"files":[{"name":"blink.py","url":"http://<Host>/patterns/ota/file/blink.py"},...]}` for OTA pulls. Requires **`Host`** header. |
| GET | `/patterns/ota/file/<name>` | Raw **`.py`** source for one driver pattern (`name` must be a safe filename, e.g. `rainbow.py`). |
| POST | `/patterns/<name>/send` | Push a **manifest** JSON line to **Wi-Fi** devices so they pull one pattern file over HTTP. Body may include **`device_id`** to target one device; otherwise all Wi-Fi devices with an **`address`** are tried. **`<name>`** may be with or without `.py`. |
| POST | `/patterns/upload` | Body JSON: **`name`**, **`code`**, optional **`overwrite`** (default true). Writes **`led-driver/src/patterns/<name>.py`**. |
| POST | `/patterns/driver` | Body JSON: **`name`** (identifier), **`code`**, optional metadata (`min_delay`, `max_delay`, `max_colors`, `n1`…`n8`, **`overwrite`**). Creates/updates both the **`.py`** file and **`db/pattern.json`** via the Pattern model. |
| GET | `/patterns/<id>` | One pattern record from the Pattern model (metadata only). |
| POST | `/patterns` | Create (`name`, optional `data`). | | POST | `/patterns` | Create (`name`, optional `data`). |
| PUT | `/patterns/<id>` | Update. | | PUT | `/patterns/<id>` | Update. |
| DELETE | `/patterns/<id>` | Delete. | | DELETE | `/patterns/<id>` | Delete. |
**Devices — pattern OTA push**
| Method | Path | Description |
|--------|------|-------------|
| POST | `/devices/<id>/patterns/push` | Wi-Fi only. Asks the driver at **`address`** to pull pattern files from this server. Optional body **`manifest`**: either a **URL string** pointing at a manifest JSON document, or a **manifest object** (same shape as in driver messages). If omitted, a default manifest is built from the request **`Host`** header. |
--- ---
## LED driver message format (transport / ESP-NOW) ## LED driver message format (transport / ESP-NOW / Wi-Fi)
Messages are JSON objects. The Pi **`build_message()`** helper (`src/util/espnow_message.py`) produces the same shape sent over serial and forwarded by the ESP32 bridge. Messages are JSON objects. The Pi **`build_message()`** helper (`src/util/espnow_message.py`) produces the same shape sent over serial and forwarded by the ESP32 bridge, and the same logical object can be sent as a **single JSON text message** to a Wi-Fi driver over the **WebSocket**.
### Top-level fields ### Top-level fields
+7 -7
View File
@@ -350,10 +350,10 @@ Manage connected devices and create/manage device groups.
#### Layout #### Layout
- **Header:** Title with "Add Device" button - **Header:** Title with "Add Device" button
- **Tabs:** Devices and Groups tabs - **Zones:** Devices and Groups zones (zone buttons / zone strip)
- **Content Area:** Tab-specific content - **Content Area:** Zone-specific content
#### Devices Tab #### Devices Zone
**Device List** **Device List**
- **Display:** List of all known devices - **Display:** List of all known devices
@@ -375,7 +375,7 @@ Manage connected devices and create/manage device groups.
- **Actions:** Cancel, Save - **Actions:** Cancel, Save
- **Note:** Only one master device per system. Adding a new master will demote existing master to slave. - **Note:** Only one master device per system. Adding a new master will demote existing master to slave.
#### Groups Tab #### Groups Zone
**Group List** **Group List**
- **Display:** List of all device groups - **Display:** List of all device groups
@@ -397,7 +397,7 @@ Manage connected devices and create/manage device groups.
- **Actions:** Cancel, Create - **Actions:** Cancel, Create
#### Design Specifications #### Design Specifications
- **Tab Style:** Active tab has purple background, white text - **Zone Style:** Active zone has purple background, white text
- **List Items:** Bordered cards with hover effects - **List Items:** Bordered cards with hover effects
- **Modal:** Centered overlay with white card, shadow - **Modal:** Centered overlay with white card, shadow
- **Status Badges:** Colored pills (green for online, red for offline) - **Status Badges:** Colored pills (green for online, red for offline)
@@ -1495,7 +1495,7 @@ peak_mem = usqlite.mem_peak()
### Flow 2: Create Device Group ### Flow 2: Create Device Group
1. User navigates to Device Management → Groups tab 1. User navigates to Device Management → Groups zone
2. User clicks "Create Group", enters name, selects pattern/settings 2. User clicks "Create Group", enters name, selects pattern/settings
3. User selects devices to add (can include master), clicks "Create" 3. User selects devices to add (can include master), clicks "Create"
4. Group appears in list 4. Group appears in list
@@ -1774,7 +1774,7 @@ peak_mem = usqlite.mem_peak()
- Buttons respond to clicks - Buttons respond to clicks
- Sliders update values - Sliders update values
- Modals open/close - Modals open/close
- Tabs switch correctly - Zone buttons switch correctly
- Preset selector works - Preset selector works
- Preset creation form validates input - Preset creation form validates input
- Preset cards display correctly - Preset cards display correctly
+114
View File
@@ -0,0 +1,114 @@
# LED controller — user guide
This page describes the **main web UI** served from the Raspberry Pi app: profiles, **zones**, presets, colour palettes, and sending commands to LED devices. Traffic may go over the **serial → ESP-NOW bridge** or **Wi-Fi** (TCP to drivers on the LAN), depending on each device’s transport.
For HTTP routes and the wire format the driver expects, see **[API.md](API.md)**. For running the app locally, see the project **README**.
Figures below are **schematic** (layout and ideas), not pixel-perfect screenshots.
---
## Run mode and Edit mode
The header has a mode toggle (desktop and mobile menu). The **label on the button is the mode you switch to** when you press it.
![Schematic: zone buttons on the left; Profiles, Zones, Presets, Patterns, and the mode toggle on the right (example shows Edit mode with “Run mode” on the button).](images/help/header-toolbar.svg)
*The active zone is highlighted. Extra management buttons appear only in Edit mode.*
| Mode | Purpose |
|------|--------|
| **Run mode** | Day-to-day control: choose a zone, tap presets, apply profiles. Management buttons are hidden. |
| **Edit mode** | Full setup: zones, presets, patterns, colour palette, **Send Presets**, profile create/clone/delete, preset reordering, and per-tile **Edit** on the strip. |
**Profiles** is available in both modes: in Run mode you can only **apply** a profile; in Edit mode you can also **create**, **clone**, and **delete** profiles.
---
## Zones
- **Select a zone**: click its button in the top bar. The main area shows that zone’s preset strip and controls.
- **Edit mode — open zone settings**: **right-click** a zone button to change its name, **device IDs** (comma-separated), and which presets appear on the zone. Device identifiers are matched to each device’s **name** when the app builds `select` messages for the driver.
- **Zones modal** (Edit mode): create new zones from the header **Zones** button. New zones need a name and device ID list (defaults to `1` if you leave a simple placeholder).
- **Brightness slider** (per zone): adjusts **global** brightness sent to devices (`b` in the driver message), with a short debounce so small drags do not flood the link.
---
## Presets on the zone strip
- **Run and Edit mode**: click the **main part** of a preset tile to **select** that preset on all devices assigned to the current zone (same logical action as a `select` in the driver API).
- **Edit mode only**:
- **Edit** beside a tile opens the preset editor for that preset, scoped to the current zone (so you can **Remove from zone** without deleting the preset from the profile).
- **Drag and drop** tiles to reorder them; order is saved for that zone.
![Schematic: zone title, brightness slider, and a row of preset tiles; Edit mode adds an Edit control and drag handles for reordering.](images/help/zone-preset-strip.svg)
*The slider controls global brightness for the zone’s devices. Click the coloured area of a tile to select that preset.*
The **Presets** header button (Edit mode) opens a **profile-wide** list: **Add** new presets, **Edit**, **Send** (push definition over the transport), and **Delete** (removes the preset from the profile entirely).
---
## Preset editor
- **Pattern**: chosen from the dropdown; optional **n1–n8** fields depend on the pattern (see **Pattern-specific parameters** in [API.md](API.md)).
- **Colours**: choosing a value in the colour picker **adds** a swatch when the picker closes. Swatches can be **reordered** by dragging. Changing a swatch with the picker **clears** palette linkage for that slot.
- **From Palette**: inserts a colour **linked** to the current profile’s palette. Linked slots show a **P** badge; if you change that palette entry later, presets using it update.
- **Brightness (0–255)** and **Delay (ms)**: stored on the preset and sent with the compact preset payload.
- **Try**: sends the current form values to devices on the **current zone**, then selects that preset — **without** `save` on the device (good for auditioning).
- **Default**: updates the zone’s **default preset** and sends a **default** hint for those devices; it does not force the same live selection behaviour as clicking a tile.
- **Save & Send**: writes the preset to the server, then pushes definitions with **save** so devices may persist them. It does **not** auto-select the preset on devices (use the strip or **Try** if you want that).
- **Remove from zone** (when you opened the editor from a zone): removes the preset from **this zone’s list only**; the preset remains in the profile for other zones.
![Schematic: preset editor with name, pattern, colour swatches (one with a P badge for palette-linked), and action buttons.](images/help/preset-editor.svg)
*Try previews without persisting on the device; **Save & Send** stores the preset and pushes definitions with save.*
---
## Profiles
- **Apply**: sets the **current profile** in your session. Zones and presets you see are scoped to that profile.
- **Edit mode — Create**: new profiles always get a populated **default** zone. Optionally tick **DJ zone** to also create a `dj` zone (device name `dj`) with starter DJ-oriented presets.
- **Clone** / **Delete**: available in Edit mode from the profile list.
---
## Send Presets (Edit mode)
**Send Presets** walks **every zone** in the **current profile**, collects each zone’s preset IDs, and calls **`POST /presets/send`** per zone (including each zone’s **default** preset when set). Use this to bulk-push definitions to hardware after editing, without clicking **Send** on every preset individually.
---
## Patterns
The **Patterns** dialog (Edit mode) lists pattern names and typical **delay** ranges from the pattern definitions. Choosing a pattern still happens inside the preset editor.
**Wi-Fi drivers** can install new pattern modules over HTTP: the REST API exposes **`/patterns/ota/*`**, **`POST /patterns/<name>/send`**, **`POST /patterns/upload`**, and **`POST /patterns/driver`** (see [API.md](API.md)). ESP-NOW devices follow the bridge/serial path you configure for preset traffic.
---
## Colour palette
**Colour Palette** (Edit mode) edits the **current profile’s** palette swatches. Those colours are reused by **From Palette** in the preset editor and stay in sync while the **P** link remains.
![Schematic: palette modal with a row of swatches for the current profile.](images/help/colour-palette.svg)
*Add or change swatches here; linked preset colours update automatically.*
---
## Mobile layout
On narrow screens, use **Menu** to reach the same actions as the desktop header (Profiles, Zones, Presets, Help, mode toggle, etc.).
![Schematic: narrow layout with Menu and the same header actions in a dropdown.](images/help/mobile-menu.svg)
*Preset tiles behave the same once a zone is selected.*
---
## Further reading
- **[API.md](API.md)** — REST routes, session scoping, WebSocket `/ws`, and LED driver JSON (`presets`, `select`, `save`, `default`, pattern keys, pattern **manifest**).
- **README** — `pipenv run run`, port 80 setup, and high-level behaviour.
BIN
View File
Binary file not shown.
+14
View File
@@ -0,0 +1,14 @@
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 480 140" width="480" height="140">
<title>Colour Palette modal (concept)</title>
<rect width="480" height="140" fill="#2a2a2a" stroke="#555" stroke-width="1" rx="6"/>
<text x="20" y="28" fill="#fff" font-family="sans-serif" font-size="15" font-weight="600">Colour Palette</text>
<text x="20" y="48" fill="#888" font-family="sans-serif" font-size="10">Profile: current profile name</text>
<rect x="20" y="58" width="44" height="44" rx="4" fill="#e53935" stroke="#333"/>
<rect x="72" y="58" width="44" height="44" rx="4" fill="#fdd835" stroke="#333"/>
<rect x="124" y="58" width="44" height="44" rx="4" fill="#43a047" stroke="#333"/>
<rect x="176" y="58" width="44" height="44" rx="4" fill="#1e88e5" stroke="#333"/>
<rect x="228" y="58" width="44" height="44" rx="4" fill="#8e24aa" stroke="#333"/>
<rect x="280" y="70" width="36" height="28" rx="3" fill="#1a1a1a" stroke="#666"/>
<text x="288" y="88" fill="#ccc" font-family="sans-serif" font-size="10">+</text>
<text x="20" y="122" fill="#aaa" font-family="sans-serif" font-size="10">Swatches belong to the profile; preset editor uses them via From Palette.</text>
</svg>

After

Width:  |  Height:  |  Size: 1.2 KiB

+24
View File
@@ -0,0 +1,24 @@
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 820 108" width="820" height="108">
<title>Header: tab buttons and action bar</title>
<rect width="820" height="108" fill="#1a1a1a"/>
<rect x="0" y="106" width="820" height="2" fill="#4a4a4a"/>
<text x="16" y="28" fill="#888" font-family="sans-serif" font-size="11">Tabs</text>
<rect x="16" y="40" width="72" height="36" rx="4" fill="#333" stroke="#666" stroke-width="1"/>
<text x="34" y="63" fill="#ccc" font-family="sans-serif" font-size="13">default</text>
<rect x="96" y="40" width="88" height="36" rx="4" fill="#2a4a7a" stroke="#5a8fd4" stroke-width="2"/>
<text x="108" y="63" fill="#fff" font-family="sans-serif" font-size="13">lounge</text>
<rect x="192" y="40" width="56" height="36" rx="4" fill="#333" stroke="#666" stroke-width="1"/>
<text x="204" y="63" fill="#ccc" font-family="sans-serif" font-size="13">dj</text>
<text x="380" y="28" fill="#888" font-family="sans-serif" font-size="11">Actions (Edit mode)</text>
<rect x="380" y="40" width="72" height="30" rx="3" fill="#3d3d3d" stroke="#555" stroke-width="1"/>
<text x="396" y="59" fill="#e0e0e0" font-family="sans-serif" font-size="11">Profiles</text>
<rect x="458" y="40" width="52" height="30" rx="3" fill="#3d3d3d" stroke="#555" stroke-width="1"/>
<text x="470" y="59" fill="#e0e0e0" font-family="sans-serif" font-size="11">Tabs</text>
<rect x="516" y="40" width="64" height="30" rx="3" fill="#3d3d3d" stroke="#555" stroke-width="1"/>
<text x="524" y="59" fill="#e0e0e0" font-family="sans-serif" font-size="11">Presets</text>
<rect x="586" y="40" width="78" height="30" rx="3" fill="#3d3d3d" stroke="#555" stroke-width="1"/>
<text x="598" y="59" fill="#e0e0e0" font-family="sans-serif" font-size="11">Patterns</text>
<rect x="670" y="40" width="134" height="30" rx="3" fill="#4a4a6a" stroke="#7a7aaf" stroke-width="1"/>
<text x="688" y="59" fill="#e0e0e0" font-family="sans-serif" font-size="11">Run mode</text>
<text x="16" y="98" fill="#aaa" font-family="sans-serif" font-size="10">Active tab highlighted. Mode button shows the mode you switch to next.</text>
</svg>

After

Width:  |  Height:  |  Size: 2.1 KiB

+26
View File
@@ -0,0 +1,26 @@
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 300 340" width="300" height="340" role="img" aria-labelledby="t">
<title id="t">Narrow screen: Menu aggregates header actions</title>
<rect width="300" height="340" fill="#2e2e2e"/>
<rect x="0" y="0" width="300" height="52" fill="#1a1a1a"/>
<rect x="12" y="12" width="56" height="28" rx="4" fill="#3d3d3d" stroke="#555" stroke-width="1"/>
<text x="22" y="30" fill="#eee" font-family="DejaVu Sans, Liberation Sans, Arial, sans-serif" font-size="12">Menu �</text>
<rect x="76" y="14" width="52" height="24" rx="4" fill="#333" stroke="#666" stroke-width="1"/>
<text x="86" y="30" fill="#ccc" font-family="DejaVu Sans, Liberation Sans, Arial, sans-serif" font-size="11">tab</text>
<rect x="136" y="14" width="52" height="24" rx="4" fill="#2a4a7a" stroke="#5a8fd4" stroke-width="1"/>
<text x="142" y="30" fill="#fff" font-family="DejaVu Sans, Liberation Sans, Arial, sans-serif" font-size="11">tab</text>
<rect x="12" y="60" width="276" height="168" rx="4" fill="#252525" stroke="#4a4a4a" stroke-width="1"/>
<text x="24" y="84" fill="#888" font-family="DejaVu Sans, Liberation Sans, Arial, sans-serif" font-size="10">Dropdown (same actions as desktop header)</text>
<g font-family="DejaVu Sans, Liberation Sans, Arial, sans-serif" font-size="12" fill="#e8e8e8">
<text x="24" y="108">Run mode</text>
<text x="24" y="132">Profiles</text>
<text x="24" y="156">Tabs</text>
<text x="24" y="180">Presets</text>
<text x="24" y="204">Help</text>
</g>
<rect x="12" y="240" width="276" height="80" rx="6" fill="#222" stroke="#444" stroke-width="1"/>
<text x="24" y="268" fill="#aaa" font-family="DejaVu Sans, Liberation Sans, Arial, sans-serif" font-size="10">Content area  presets as on desktop</text>
<rect x="24" y="278" width="80" height="32" rx="4" fill="#333" stroke="#555"/>
<text x="36" y="298" fill="#ddd" font-family="DejaVu Sans, Liberation Sans, Arial, sans-serif" font-size="11">preset</text>
<rect x="112" y="278" width="80" height="32" rx="4" fill="#333" stroke="#555"/>
<text x="124" y="298" fill="#ddd" font-family="DejaVu Sans, Liberation Sans, Arial, sans-serif" font-size="11">preset</text>
</svg>

After

Width:  |  Height:  |  Size: 2.2 KiB

+31
View File
@@ -0,0 +1,31 @@
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 520 400" width="520" height="400">
<title>Preset editor modal (simplified)</title>
<rect width="520" height="400" fill="#1e1e1e"/>
<rect x="40" y="28" width="440" height="344" rx="8" fill="#2a2a2a" stroke="#555" stroke-width="1"/>
<text x="60" y="58" fill="#fff" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="17" font-weight="600">Preset</text>
<text x="60" y="86" fill="#aaa" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">Name</text>
<rect x="60" y="92" width="200" height="28" rx="3" fill="#1a1a1a" stroke="#444" stroke-width="1"/>
<text x="72" y="111" fill="#ddd" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="12">evening glow</text>
<text x="280" y="86" fill="#aaa" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">Pattern</text>
<rect x="280" y="92" width="160" height="28" rx="3" fill="#1a1a1a" stroke="#444" stroke-width="1"/>
<text x="292" y="111" fill="#ddd" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="12">pulse</text>
<text x="60" y="148" fill="#aaa" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">Colours</text>
<rect x="60" y="156" width="48" height="48" rx="4" fill="#7e57c2" stroke="#333" stroke-width="1"/>
<circle cx="66" cy="162" r="8" fill="#3f51b5" stroke="#fff" stroke-width="1"/>
<text x="63" y="166" fill="#fff" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="7" font-weight="700">P</text>
<rect x="116" y="156" width="48" height="48" rx="4" fill="#26a69a" stroke="#333" stroke-width="1"/>
<text x="176" y="184" fill="#888" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="10">P = palette-linked</text>
<text x="60" y="232" fill="#aaa" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">Brightness, delay, n1-n8</text>
<rect x="60" y="238" width="120" height="24" rx="3" fill="#1a1a1a" stroke="#444" stroke-width="1"/>
<text x="68" y="254" fill="#888" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">0-255</text>
<text x="60" y="290" fill="#aaa" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="10">Actions</text>
<rect x="60" y="298" width="44" height="26" rx="3" fill="#444" stroke="#666" stroke-width="1"/>
<text x="72" y="315" fill="#eee" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">Try</text>
<rect x="112" y="298" width="56" height="26" rx="3" fill="#444" stroke="#666" stroke-width="1"/>
<text x="120" y="315" fill="#eee" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">Default</text>
<rect x="176" y="298" width="88" height="26" rx="3" fill="#3d5a80" stroke="#5a7ab8" stroke-width="1"/>
<text x="188" y="315" fill="#fff" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">Save+Send</text>
<rect x="272" y="298" width="48" height="26" rx="3" fill="#444" stroke="#666" stroke-width="1"/>
<text x="284" y="315" fill="#eee" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="11">Close</text>
<text x="60" y="352" fill="#888" font-family="DejaVu Sans,Liberation Sans,Arial,sans-serif" font-size="9">Try: preview without device save. Save+Send: store and push with save.</text>
</svg>

After

Width:  |  Height:  |  Size: 3.3 KiB

+35
View File
@@ -0,0 +1,35 @@
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 800 220" width="800" height="220">
<title>Main area: brightness and preset tiles</title>
<defs>
<linearGradient id="rg1" x1="0%" y1="0%" x2="100%" y2="0%">
<stop offset="0%" style="stop-color:#ffd54f"/><stop offset="100%" style="stop-color:#fff8e1"/>
</linearGradient>
<linearGradient id="rg2" x1="0%" y1="0%" x2="100%" y2="0%">
<stop offset="0%" style="stop-color:#e53935"/><stop offset="33%" style="stop-color:#fdd835"/>
<stop offset="66%" style="stop-color:#43a047"/><stop offset="100%" style="stop-color:#1e88e5"/>
</linearGradient>
<linearGradient id="rg3" x1="0%" y1="0%" x2="100%" y2="0%">
<stop offset="0%" style="stop-color:#00897b"/><stop offset="100%" style="stop-color:#4db6ac"/>
</linearGradient>
</defs>
<rect width="800" height="220" fill="#2e2e2e"/>
<text x="20" y="32" fill="#fff" font-family="sans-serif" font-size="16" font-weight="600">lounge</text>
<text x="20" y="56" fill="#aaa" font-family="sans-serif" font-size="11">Brightness (global)</text>
<rect x="20" y="64" width="320" height="8" rx="4" fill="#444"/>
<rect x="20" y="64" width="200" height="8" rx="4" fill="#6a9ee2"/>
<circle cx="220" cy="68" r="10" fill="#ccc" stroke="#333" stroke-width="1"/>
<text x="360" y="74" fill="#888" font-family="sans-serif" font-size="11">drag to adjust</text>
<text x="20" y="108" fill="#aaa" font-family="sans-serif" font-size="11">Click tile body to select on tab devices</text>
<rect x="20" y="118" width="200" height="72" rx="6" fill="#252525" stroke="#555" stroke-width="1"/>
<rect x="28" y="128" width="184" height="36" rx="4" fill="url(#rg1)"/>
<text x="32" y="180" fill="#eee" font-family="sans-serif" font-size="13" font-weight="600">warm white</text>
<rect x="232" y="118" width="200" height="72" rx="6" fill="#252525" stroke="#6a9ee2" stroke-width="2"/>
<rect x="240" y="128" width="184" height="36" rx="4" fill="url(#rg2)"/>
<text x="244" y="180" fill="#eee" font-family="sans-serif" font-size="13" font-weight="600">rainbow</text>
<rect x="444" y="118" width="200" height="72" rx="6" fill="#252525" stroke="#555" stroke-width="1"/>
<rect x="452" y="128" width="184" height="36" rx="4" fill="url(#rg3)"/>
<text x="456" y="180" fill="#eee" font-family="sans-serif" font-size="13" font-weight="600">chase</text>
<rect x="656" y="130" width="56" height="48" rx="4" fill="#3d3d3d" stroke="#555" stroke-width="1"/>
<text x="670" y="158" fill="#ddd" font-family="sans-serif" font-size="11">Edit</text>
<text x="656" y="198" fill="#888" font-family="sans-serif" font-size="10">Edit mode: drag tiles to reorder</text>
</svg>

After

Width:  |  Height:  |  Size: 2.6 KiB

+14 -14
View File
@@ -67,7 +67,7 @@
box-shadow: 0 4px 6px rgba(0, 0, 0, 0.1); box-shadow: 0 4px 6px rgba(0, 0, 0, 0.1);
} }
.tab { .zone {
flex: 1; flex: 1;
padding: 12px 24px; padding: 12px 24px;
border: none; border: none;
@@ -78,16 +78,16 @@
transition: all 0.2s; transition: all 0.2s;
} }
.tab.active { .zone.active {
background: #667eea; background: #667eea;
color: white; color: white;
} }
.tab-content { .zone-content {
display: none; display: none;
} }
.tab-content.active { .zone-content.active {
display: block; display: block;
} }
@@ -249,12 +249,12 @@
</div> </div>
<div class="tabs"> <div class="tabs">
<button class="tab active" onclick="switchTab('devices')">Devices</button> <button class="zone active" onclick="switchTab('devices')">Devices</button>
<button class="tab" onclick="switchTab('groups')">Groups</button> <button class="zone" onclick="switchTab('groups')">Groups</button>
</div> </div>
<!-- Devices Tab --> <!-- Devices Zone -->
<div id="devices-tab" class="tab-content active"> <div id="devices-zone" class="zone-content active">
<div class="card"> <div class="card">
<h2>Connected Devices</h2> <h2>Connected Devices</h2>
<div class="device-item"> <div class="device-item">
@@ -313,8 +313,8 @@
</div> </div>
</div> </div>
<!-- Groups Tab --> <!-- Groups Zone -->
<div id="groups-tab" class="tab-content"> <div id="groups-zone" class="zone-content">
<div class="card"> <div class="card">
<div style="display: flex; justify-content: space-between; align-items: center; margin-bottom: 20px;"> <div style="display: flex; justify-content: space-between; align-items: center; margin-bottom: 20px;">
<h2>Groups</h2> <h2>Groups</h2>
@@ -386,12 +386,12 @@
</div> </div>
<script> <script>
function switchTab(tab) { function switchTab(zone) {
document.querySelectorAll('.tab').forEach(t => t.classList.remove('active')); document.querySelectorAll('.zone').forEach(t => t.classList.remove('active'));
document.querySelectorAll('.tab-content').forEach(c => c.classList.remove('active')); document.querySelectorAll('.zone-content').forEach(c => c.classList.remove('active'));
event.target.classList.add('active'); event.target.classList.add('active');
document.getElementById(tab + '-tab').classList.add('active'); document.getElementById(zone + '-zone').classList.add('active');
} }
function showAddDeviceModal() { function showAddDeviceModal() {
-112
View File
@@ -1,112 +0,0 @@
# Benchmark: LRU eviction vs add-then-remove-after-use on ESP32.
# Run on device: mpremote run esp32/benchmark_peers.py
# (add/del_peer are timed; send() may fail if no peer is listening - timing still valid)
import espnow
import network
import time
BROADCAST = b"\xff\xff\xff\xff\xff\xff"
MAX_PEERS = 20
ITERATIONS = 50
PAYLOAD = b"x" * 32 # small payload
network.WLAN(network.STA_IF).active(True)
esp = espnow.ESPNow()
esp.active(True)
esp.add_peer(BROADCAST)
# Build 19 dummy MACs so we have 20 peers total (broadcast + 19).
def mac(i):
return bytes([0, 0, 0, 0, 0, i])
peers_list = [mac(i) for i in range(1, 20)]
for p in peers_list:
esp.add_peer(p)
# One "new" MAC we'll add/remove.
new_mac = bytes([0, 0, 0, 0, 0, 99])
def bench_lru():
"""LRU: ensure_peer (evict oldest + add new), send, update last_used."""
last_used = {BROADCAST: time.ticks_ms()}
for p in peers_list:
last_used[p] = time.ticks_ms()
# Pre-remove one so we have 19; ensure_peer(new) will add 20th.
esp.del_peer(peers_list[-1])
last_used.pop(peers_list[-1], None)
# Now 19 peers. Each iteration: ensure_peer(new) -> add_peer(new), send, update.
# Next iter: ensure_peer(new) -> already there, just send. So we need to force
# eviction each time: use a different "new" each time so we always evict+add.
t0 = time.ticks_us()
for i in range(ITERATIONS):
addr = bytes([0, 0, 0, 0, 0, 50 + (i % 30)]) # 30 different "new" MACs
peers = esp.get_peers()
peer_macs = [p[0] for p in peers]
if addr not in peer_macs:
if len(peer_macs) >= MAX_PEERS:
oldest_mac = None
oldest_ts = time.ticks_ms()
for m in peer_macs:
if m == BROADCAST:
continue
ts = last_used.get(m, 0)
if ts <= oldest_ts:
oldest_ts = ts
oldest_mac = m
if oldest_mac is not None:
esp.del_peer(oldest_mac)
last_used.pop(oldest_mac, None)
esp.add_peer(addr)
esp.send(addr, PAYLOAD)
last_used[addr] = time.ticks_ms()
t1 = time.ticks_us()
return time.ticks_diff(t1, t0)
def bench_add_then_remove():
"""Add peer, send, del_peer (remove after use). At 20 we must del one first."""
# Start full: 20 peers. To add new we del any one, add new, send, del new.
victim = peers_list[0]
t0 = time.ticks_us()
for i in range(ITERATIONS):
esp.del_peer(victim) # make room
esp.add_peer(new_mac)
esp.send(new_mac, PAYLOAD)
esp.del_peer(new_mac)
esp.add_peer(victim) # put victim back so we're at 20 again
t1 = time.ticks_us()
return time.ticks_diff(t1, t0)
def bench_send_existing():
"""Baseline: send to existing peer only (no add/del)."""
t0 = time.ticks_us()
for _ in range(ITERATIONS):
esp.send(peers_list[0], PAYLOAD)
t1 = time.ticks_us()
return time.ticks_diff(t1, t0)
print("ESP-NOW peer benchmark ({} iterations)".format(ITERATIONS))
print()
# Baseline: send to existing peer
try:
us = bench_send_existing()
print("Send to existing peer only: {:>8} us total {:>7.1f} us/iter".format(us, us / ITERATIONS))
except Exception as e:
print("Send existing failed:", e)
print()
# LRU: evict oldest then add new, send
try:
us = bench_lru()
print("LRU (evict oldest + add + send): {:>8} us total {:>7.1f} us/iter".format(us, us / ITERATIONS))
except Exception as e:
print("LRU failed:", e)
print()
# Add then remove after use
try:
us = bench_add_then_remove()
print("Add then remove after use: {:>8} us total {:>7.1f} us/iter".format(us, us / ITERATIONS))
except Exception as e:
print("Add-then-remove failed:", e)
print()
print("Done.")
-66
View File
@@ -1,66 +0,0 @@
# Serial-to-ESP-NOW bridge: receives from Pi on UART, forwards to ESP-NOW peers.
# Wire format: first 6 bytes = destination MAC, rest = payload. Address is always 6 bytes.
from machine import Pin, UART
import espnow
import network
import time
UART_BAUD = 912000
BROADCAST = b"\xff\xff\xff\xff\xff\xff"
MAX_PEERS = 20
network.WLAN(network.STA_IF).active(True)
esp = espnow.ESPNow()
esp.active(True)
esp.add_peer(BROADCAST)
uart = UART(1, UART_BAUD, tx=Pin(21), rx=Pin(6))
# Track last send time per peer for LRU eviction (remove oldest when at limit).
last_used = {BROADCAST: time.ticks_ms()}
# ESP_ERR_ESPNOW_EXIST: peer already registered (ignore when adding).
ESP_ERR_ESPNOW_EXIST = -12395
def ensure_peer(addr):
"""Ensure addr is in the peer list. When at 20 peers, remove the oldest-used (LRU)."""
peers = esp.get_peers()
peer_macs = [p[0] for p in peers]
if addr in peer_macs:
return
if len(peer_macs) >= MAX_PEERS:
# Remove the peer we used least recently (oldest).
oldest_mac = None
oldest_ts = time.ticks_ms()
for mac in peer_macs:
if mac == BROADCAST:
continue
ts = last_used.get(mac, 0)
if ts <= oldest_ts:
oldest_ts = ts
oldest_mac = mac
if oldest_mac is not None:
esp.del_peer(oldest_mac)
last_used.pop(oldest_mac, None)
try:
esp.add_peer(addr)
except OSError as e:
if e.args[0] != ESP_ERR_ESPNOW_EXIST:
raise
print("Starting ESP32 main.py")
while True:
if uart.any():
data = uart.read()
if not data or len(data) < 6:
continue
print(f"Received data: {data}")
addr = data[:6]
payload = data[6:]
ensure_peer(addr)
esp.send(addr, payload)
last_used[addr] = time.ticks_ms()
+7
View File
@@ -0,0 +1,7 @@
# espnow-sender
Minimal MicroPython project for receiving JSON over Microdot WebSocket.
- WebSocket endpoint: `/ws`
- Entry point: `main.py`
- Message template: `msg.json`
+120
View File
@@ -0,0 +1,120 @@
import asyncio
import json
from microdot import Microdot
from microdot.websocket import WebSocketError, with_websocket
import espnow
import network
from util import format_mac, parse_mac
app = Microdot()
_esp = None
_known_peers = set()
_ws_clients = set()
def _init_espnow():
global _esp
sta = network.WLAN(network.STA_IF)
sta.active(True)
_esp = espnow.ESPNow()
_esp.active(True)
def _validate_envelope(obj):
if obj.get("v") != "1":
raise ValueError("message.v must be '1'")
devices = obj["devices"]
for address in devices.keys():
parse_mac(address)
return obj
def _send_espnow(address, payload):
if _esp is None:
raise ValueError("espnow is not initialized")
mac = parse_mac(address)
msg = json.dumps(payload, separators=(",", ":")).encode("utf-8")
if mac not in _known_peers:
_esp.add_peer(mac)
_known_peers.add(mac)
_esp.send(mac, msg)
return mac, len(msg)
async def _broadcast_ws(obj):
text = json.dumps(obj)
dead = []
for client in list(_ws_clients):
try:
await client.send(text)
except Exception:
dead.append(client)
for client in dead:
_ws_clients.discard(client)
async def _espnow_receive_loop():
while True:
host, msg = _esp.recv(0)
if not host:
await asyncio.sleep(0.01)
continue
await _broadcast_ws(
{
"from": format_mac(host),
"payload": msg.decode("utf-8"),
}
)
@app.route("/ws")
@with_websocket
async def ws(request, ws):
_ws_clients.add(ws)
while True:
try:
raw = await ws.receive()
except WebSocketError:
break
if not raw:
break
try:
parsed = json.loads(raw)
env = _validate_envelope(parsed)
sent = []
for address, payload in env["devices"].items():
mac, payload_size = _send_espnow(address, payload)
sent.append(
{
"address": format_mac(mac),
"bytes": payload_size,
}
)
except (ValueError, TypeError) as e:
await ws.send(json.dumps({"ok": False, "error": str(e)}))
continue
await ws.send(
json.dumps(
{
"ok": True,
"sent": sent,
}
)
)
_ws_clients.discard(ws)
async def main(port=80):
_init_espnow()
asyncio.create_task(_espnow_receive_loop())
await app.start_server(host="0.0.0.0", port=port)
if __name__ == "__main__":
asyncio.run(main(port=80))
+24
View File
@@ -0,0 +1,24 @@
{
"v": "1",
"devices": {
"ff:ff:ff:ff:ff:ff": {
"presets": {
"preset_id": {
"pattern": "on",
"colors": ["#FF0000"],
"delay": 100,
"brightness": 255,
"auto": true
}
},
"select": {
"preset": "preset_id",
"step": 0
},
"save": true,
"default": "preset_id",
"b": 255
}
}
}
+12
View File
@@ -0,0 +1,12 @@
def parse_mac(value):
raw = value.strip().lower().replace(":", "").replace("-", "")
if len(raw) != 12:
raise ValueError("address must be 12 hex chars or aa:bb:cc:dd:ee:ff")
try:
return bytes.fromhex(raw)
except ValueError:
raise ValueError("address contains non-hex characters")
def format_mac(mac_bytes):
return ":".join("{:02x}".format(b) for b in mac_bytes)
Submodule
+1
Submodule led-simulator added at 7ce56b64df.
Submodule led-tool updated: 3844aa9d6a...d6331a105c.
+123
View File
@@ -0,0 +1,123 @@
// Parametric LED bar vertical stand socket
// For a bar nominally 14 x 17 mm, 2 m long.
// This part is intended to be screwed to an MDF base.
// -------------------------
// User parameters
// -------------------------
bar_w = 14; // Bar width (mm)
bar_d = 17; // Bar depth (mm)
clearance = 0.4; // Total clearance added to each axis (mm)
socket_height = 36; // Height of printed socket body (mm)
wall = 3.2; // Socket wall thickness (mm)
base_thickness = 5; // Printed bottom plate thickness (mm)
// USB cable/connector side opening
usb_notch_enable = true;
usb_notch_w = 11;
usb_notch_h = 9;
usb_notch_from_bottom = 6;
usb_notch_side = "right"; // "right" or "left"
// Mounting ears for MDF screws
ear_enable = true;
ear_len = 16;
ear_w = 16;
ear_thickness = base_thickness;
screw_hole_d = 4.2; // M4 clearance. Use 3.4 for M3.
screw_hole_edge = 5.5; // Hole center offset from ear outer corner
// Optional clamp lip at top to reduce wobble
top_lip_enable = true;
top_lip_depth = 2.0; // Intrudes into opening on each side
top_lip_height = 3.0;
$fn = 48;
// -------------------------
// Derived
// -------------------------
inner_w = bar_w + clearance;
inner_d = bar_d + clearance;
outer_w = inner_w + wall * 2;
outer_d = inner_d + wall * 2;
outer_h = socket_height;
module screw_hole() {
cylinder(h = ear_thickness + 0.2, d = screw_hole_d);
}
module mounting_ear(sign_y = 1) {
translate([outer_w / 2, sign_y * (outer_d / 2), 0])
cube([ear_len, ear_w, ear_thickness], center = false);
}
module top_lip() {
if (top_lip_enable) {
// Front and back lips at the top of the socket.
translate([wall, wall, outer_h - top_lip_height])
cube([top_lip_depth, inner_d, top_lip_height]);
translate([outer_w - wall - top_lip_depth, wall, outer_h - top_lip_height])
cube([top_lip_depth, inner_d, top_lip_height]);
}
}
difference() {
union() {
// Main body
cube([outer_w, outer_d, outer_h], center = false);
// Base plate under socket for stiffness
translate([0, 0, -base_thickness])
cube([outer_w, outer_d, base_thickness], center = false);
// Mounting ears
if (ear_enable) {
translate([0, 0, -ear_thickness]) {
mounting_ear(1);
mounting_ear(-1);
}
}
top_lip();
}
// Main bar cavity
translate([wall, wall, 0])
cube([inner_w, inner_d, outer_h + 0.2], center = false);
// USB side notch
if (usb_notch_enable) {
if (usb_notch_side == "right") {
translate([outer_w - wall - 0.1, (outer_d - usb_notch_w) / 2, usb_notch_from_bottom])
cube([wall + 0.3, usb_notch_w, usb_notch_h], center = false);
} else {
translate([-0.2, (outer_d - usb_notch_w) / 2, usb_notch_from_bottom])
cube([wall + 0.3, usb_notch_w, usb_notch_h], center = false);
}
}
// Screw holes in ears
if (ear_enable) {
// Upper ear hole
translate([
outer_w / 2 + ear_len - screw_hole_edge,
outer_d / 2 + ear_w - screw_hole_edge,
-ear_thickness - 0.05
]) screw_hole();
// Lower ear hole
translate([
outer_w / 2 + ear_len - screw_hole_edge,
-outer_d / 2 + screw_hole_edge,
-ear_thickness - 0.05
]) screw_hole();
}
}
// Print orientation helper:
// Keep the base/ears on the bed.
// If fit is tight, increase clearance to 0.5 or 0.6.
+3
View File
@@ -0,0 +1,3 @@
[tool.pytest.ini_options]
testpaths = ["tests"]
python_files = ["test_endpoints_pytest.py", "engine_tests/test_*.py"]
+19
View File
@@ -0,0 +1,19 @@
#!/usr/bin/env sh
# Build docs/help.pdf from docs/help.md.
# Requires: pandoc, chromium (headless print-to-PDF).
set -eu
ROOT="$(cd "$(dirname "$0")/.." && pwd)"
# HTML next to docs/help.md so relative image paths (e.g. images/help/*.svg) resolve.
HTML="$ROOT/docs/.help-print.html"
trap 'rm -f "$HTML"' EXIT
pandoc "$ROOT/docs/help.md" -s \
--css="$ROOT/scripts/help-pdf.css" \
--metadata title="LED controller — user guide" \
-o "$HTML"
chromium --headless --no-sandbox --disable-gpu \
--print-to-pdf="$ROOT/docs/help.pdf" \
"file://${HTML}"
echo "Wrote $ROOT/docs/help.pdf ($(wc -c < "$ROOT/docs/help.pdf") bytes)"
-4
View File
@@ -1,4 +0,0 @@
#!/usr/bin/env bash
# Copy esp32/main.py to the connected ESP32 as /main.py (single line, no wrap).
cd "$(dirname "$0")/.."
pipenv run mpremote fs cp esp32/main.py :/main.py
+16
View File
@@ -0,0 +1,16 @@
#!/usr/bin/env bash
set -euo pipefail
ROOT_DIR="$(cd "$(dirname "$0")/.." && pwd)"
PORT="${PORT:-80}"
# On watchfiles restarts the previous process can linger briefly.
# Proactively terminate any listener on the target port before boot.
pids="$(ss -ltnp "sport = :$PORT" 2>/dev/null | sed -n 's/.*pid=\([0-9]\+\).*/\1/p' | sort -u)"
if [ -n "${pids}" ]; then
kill -TERM ${pids} 2>/dev/null || true
sleep 0.3
fi
cd "$ROOT_DIR/src"
exec python main.py
+96
View File
@@ -0,0 +1,96 @@
/* Print stylesheet for docs/help.md → PDF (Chromium headless) */
@page {
margin: 18mm;
size: A4;
}
html {
font-size: 11pt;
line-height: 1.4;
}
body {
font-family: "DejaVu Sans", "Liberation Sans", Helvetica, Arial, sans-serif;
color: #222;
max-width: 100%;
}
h1 {
font-size: 1.45rem;
border-bottom: 2px solid #333;
padding-bottom: 0.25em;
margin-top: 0;
}
h2 {
font-size: 1.15rem;
margin-top: 1.25em;
page-break-after: avoid;
}
h3 {
font-size: 1.05rem;
margin-top: 1em;
page-break-after: avoid;
}
code {
font-family: "DejaVu Sans Mono", "Liberation Mono", Consolas, monospace;
font-size: 0.92em;
background: #f3f3f3;
padding: 0.1em 0.35em;
border-radius: 3px;
}
pre {
font-family: "DejaVu Sans Mono", "Liberation Mono", Consolas, monospace;
font-size: 0.88em;
background: #f5f5f5;
border: 1px solid #ddd;
padding: 0.65em 0.85em;
overflow-x: auto;
page-break-inside: avoid;
}
pre code {
background: none;
padding: 0;
}
table {
border-collapse: collapse;
width: 100%;
margin: 0.75em 0;
font-size: 0.95em;
page-break-inside: avoid;
}
th, td {
border: 1px solid #bbb;
padding: 6px 8px;
text-align: left;
vertical-align: top;
}
th {
background: #eee;
}
a {
color: #1a5276;
text-decoration: none;
}
hr {
border: none;
border-top: 1px solid #ccc;
margin: 1.25em 0;
}
ul, ol {
padding-left: 1.35em;
}
li {
margin: 0.2em 0;
}
/* Images in docs/help.md */
img {
max-width: 100%;
height: auto;
page-break-inside: avoid;
border: 1px solid #ccc;
border-radius: 4px;
}
p.help-figure-caption {
font-size: 0.9em;
color: #555;
margin: 0.35em 0 1em 0;
line-height: 1.35;
}
+12
View File
@@ -10,6 +10,18 @@ if [ ! -f "scripts/led-controller.service" ]; then
echo "Run this script from the repo root." echo "Run this script from the repo root."
exit 1 exit 1
fi fi
export PIPENV_VENV_IN_PROJECT="${PIPENV_VENV_IN_PROJECT:-1}"
if command -v pipenv >/dev/null 2>&1; then
PY="$(command -v python3)"
if [ -z "$PY" ]; then
echo "python3 not found; install python3." >&2
exit 1
fi
echo "Ensuring Pipenv deps with $PY (venv in project: .venv when PIPENV_VENV_IN_PROJECT=1)…"
# --skip-lock: install from Pipfile only (avoids lock/Python hash mismatches on device).
pipenv install --quiet --skip-lock --python "$PY"
pipenv --venv > scripts/.led-controller-venv
fi
chmod +x scripts/start.sh chmod +x scripts/start.sh
sudo cp "scripts/led-controller.service" "$UNIT_PATH" sudo cp "scripts/led-controller.service" "$UNIT_PATH"
sudo systemctl daemon-reload sudo systemctl daemon-reload
+5 -2
View File
@@ -1,7 +1,8 @@
[Unit] [Unit]
Description=LED Controller web server Description=LED Controller web server
After=network-online.target # Use network.target only. Ordering after network-online.target can block `systemctl start`
Wants=network-online.target # until wait-online finishes; Wi‑Fi/DHCP delays then look like a hung start job.
After=network.target
[Service] [Service]
Type=simple Type=simple
@@ -12,6 +13,8 @@ Environment=PATH=/home/pi/.local/bin:/usr/local/bin:/usr/bin:/bin
ExecStart=/bin/bash /home/pi/led-controller/scripts/start.sh ExecStart=/bin/bash /home/pi/led-controller/scripts/start.sh
Restart=on-failure Restart=on-failure
RestartSec=5 RestartSec=5
# pipenv/first bind can be slow; avoid misleading "activating" forever if misconfigured
TimeoutStartSec=120
[Install] [Install]
WantedBy=multi-user.target WantedBy=multi-user.target
+35 -2
View File
@@ -1,5 +1,38 @@
#!/usr/bin/env bash #!/usr/bin/env bash
# Start the LED controller web server (port 80 by default). # Start the LED controller web server (port 80 by default).
cd "$(dirname "$0")/.." # Avoid `pipenv run` on the hot path — it re-resolves the env every time and is slow on a Pi.
set -euo pipefail
ROOT="$(cd "$(dirname "$0")/.." && pwd)"
cd "$ROOT"
export PORT="${PORT:-80}" export PORT="${PORT:-80}"
pipenv run run export PIPENV_VENV_IN_PROJECT="${PIPENV_VENV_IN_PROJECT:-1}"
SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"
CACHE="$SCRIPT_DIR/.led-controller-venv"
PYTHON=""
if [ -x "$ROOT/.venv/bin/python" ]; then
PYTHON="$ROOT/.venv/bin/python"
elif [ -f "$CACHE" ]; then
_v="$(tr -d '\r\n' < "$CACHE")"
if [ -n "$_v" ] && [ -x "$_v/bin/python" ]; then
PYTHON="$_v/bin/python"
fi
fi
if [ -z "$PYTHON" ] && command -v pipenv >/dev/null 2>&1; then
_v="$(cd "$ROOT" && pipenv --venv 2>/dev/null || true)"
if [ -n "${_v:-}" ] && [ -x "$_v/bin/python" ]; then
PYTHON="$_v/bin/python"
printf '%s\n' "$_v" > "$CACHE" || true
fi
fi
if [ -z "$PYTHON" ]; then
echo 'led-controller: no venv resolved; using pipenv run (slow). Run: cd '"$ROOT"' && PIPENV_VENV_IN_PROJECT=1 pipenv install --skip-lock --python "$(command -v python3)"' >&2
exec pipenv run run
fi
cd "$ROOT/src"
exec "$PYTHON" -u main.py
+344 -19
View File
@@ -1,29 +1,170 @@
from microdot import Microdot from microdot import Microdot
from models.device import Device from models.device import (
Device,
derive_device_mac,
validate_device_transport,
validate_device_type,
)
from models.transport import get_current_sender
from models.wifi_ws_clients import (
normalize_tcp_peer_ip,
send_json_line_to_ip,
tcp_client_connected,
)
from util.driver_patterns import driver_patterns_dir
from util.espnow_message import build_message
import asyncio
import json import json
import os
import socket
from urllib.parse import quote
# Ephemeral driver preset name (never written to Pi preset store; ``save`` not set on wire).
_IDENTIFY_PRESET_KEY = "__identify"
# Short-key payload: 10 Hz full cycle = 50 ms on + 50 ms off (driver ``blink`` toggles each ``d`` ms).
_IDENTIFY_DRIVER_PRESET = {
"p": "blink",
"c": ["#ff0000"],
"d": 50,
"b": 128,
"a": True,
"n1": 0,
"n2": 0,
"n3": 0,
"n4": 0,
"n5": 0,
"n6": 0,
}
def _compact_v1_json(*, presets=None, select=None, save=False):
"""Single-line v1 object; compact so serial/ESP-NOW stays small."""
body = {"v": "1"}
if presets is not None:
body["presets"] = presets
if save:
body["save"] = True
if select is not None:
body["select"] = select
return json.dumps(body, separators=(",", ":"))
# Seconds after identify blink before selecting built-in ``off`` (tests may monkeypatch).
IDENTIFY_OFF_DELAY_S = 2.0
controller = Microdot() controller = Microdot()
devices = Device() devices = Device()
def _device_live_connected(dev_dict):
"""
Wi-Fi: whether the controller has an outbound WebSocket to this device's IP.
ESP-NOW: None (no Wi-Fi session on the Pi for that transport).
"""
tr = (dev_dict.get("transport") or "espnow").strip().lower()
if tr != "wifi":
return None
ip = normalize_tcp_peer_ip(dev_dict.get("address") or "")
if not ip:
return False
return tcp_client_connected(ip)
def _device_json_with_live_status(dev_dict):
row = dict(dev_dict)
row["connected"] = _device_live_connected(dev_dict)
return row
def _safe_pattern_filename(name):
if not isinstance(name, str):
return False
if not name.endswith(".py"):
return False
if "/" in name or "\\" in name or ".." in name:
return False
return True
def _http_post_pattern_source(ip, filename, code_text, reload_patterns=True, timeout_s=10.0):
"""POST source to driver /patterns/upload?name=...&reload=...; return True on 2xx."""
if not isinstance(ip, str) or not ip.strip():
return False
if not isinstance(filename, str) or not filename:
return False
if not isinstance(code_text, str):
return False
name_q = quote(filename, safe="")
reload_q = "1" if reload_patterns else "0"
path = "/patterns/upload?name=%s&reload=%s" % (name_q, reload_q)
body = code_text.encode("utf-8")
req = (
"POST %s HTTP/1.1\r\n"
"Host: %s\r\n"
"Content-Type: text/plain; charset=utf-8\r\n"
"Content-Length: %d\r\n"
"Connection: close\r\n"
"\r\n" % (path, ip, len(body))
).encode("utf-8") + body
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
sock.settimeout(timeout_s)
sock.connect((ip.strip(), 80))
sock.sendall(req)
data = b""
while True:
chunk = sock.recv(1024)
if not chunk:
break
data += chunk
except OSError:
return False
finally:
try:
sock.close()
except Exception:
pass
first_line = data.split(b"\r\n", 1)[0] if data else b""
return b" 2" in first_line
async def _identify_send_off_after_delay(sender, transport, wifi_ip, dev_id, name):
try:
await asyncio.sleep(IDENTIFY_OFF_DELAY_S)
off_msg = build_message(select={name: ["off"]})
if transport == "wifi":
await send_json_line_to_ip(wifi_ip, off_msg)
else:
await sender.send(off_msg, addr=dev_id)
except Exception:
pass
@controller.get("") @controller.get("")
async def list_devices(request): async def list_devices(request):
"""List all devices.""" """List all devices (includes ``connected`` for live Wi-Fi WebSocket presence)."""
devices_data = {} devices_data = {}
for dev_id in devices.list(): for dev_id in devices.list():
d = devices.read(dev_id) d = devices.read(dev_id)
if d: if d:
devices_data[dev_id] = d devices_data[dev_id] = _device_json_with_live_status(d)
return json.dumps(devices_data), 200, {"Content-Type": "application/json"} return json.dumps(devices_data), 200, {"Content-Type": "application/json"}
@controller.get("/<id>") @controller.get("/<id>")
async def get_device(request, id): async def get_device(request, id):
"""Get a device by ID.""" """Get a device by ID (includes ``connected`` for live Wi-Fi WebSocket presence)."""
dev = devices.read(id) dev = devices.read(id)
if dev: if dev:
return json.dumps(dev), 200, {"Content-Type": "application/json"} return json.dumps(_device_json_with_live_status(dev)), 200, {
return json.dumps({"error": "Device not found"}), 404 "Content-Type": "application/json",
}
return json.dumps({"error": "Device not found"}), 404, {
"Content-Type": "application/json",
}
@controller.post("") @controller.post("")
@@ -32,37 +173,221 @@ async def create_device(request):
try: try:
data = request.json or {} data = request.json or {}
name = data.get("name", "").strip() name = data.get("name", "").strip()
if not name:
return json.dumps({"error": "name is required"}), 400, {
"Content-Type": "application/json",
}
try:
device_type = validate_device_type(data.get("type", "led"))
transport = validate_device_transport(data.get("transport", "espnow"))
except ValueError as e:
return json.dumps({"error": str(e)}), 400, {
"Content-Type": "application/json",
}
address = data.get("address") address = data.get("address")
mac = data.get("mac")
if derive_device_mac(mac=mac, address=address, transport=transport) is None:
return json.dumps(
{
"error": "mac is required (12 hex digits); for Wi-Fi include mac plus IP in address"
}
), 400, {"Content-Type": "application/json"}
default_pattern = data.get("default_pattern") default_pattern = data.get("default_pattern")
tabs = data.get("tabs") zl = data.get("zones")
if isinstance(tabs, list): if isinstance(zl, list):
tabs = [str(t) for t in tabs] zl = [str(t) for t in zl]
else: else:
tabs = [] zl = []
dev_id = devices.create(name=name, address=address, default_pattern=default_pattern, tabs=tabs) dev_id = devices.create(
name=name,
address=address,
mac=mac,
default_pattern=default_pattern,
zones=zl,
device_type=device_type,
transport=transport,
)
dev = devices.read(dev_id) dev = devices.read(dev_id)
return json.dumps({dev_id: dev}), 201, {"Content-Type": "application/json"} return json.dumps({dev_id: dev}), 201, {"Content-Type": "application/json"}
except ValueError as e:
msg = str(e)
code = 409 if "already exists" in msg.lower() else 400
return json.dumps({"error": msg}), code, {"Content-Type": "application/json"}
except Exception as e: except Exception as e:
return json.dumps({"error": str(e)}), 400 return json.dumps({"error": str(e)}), 400, {"Content-Type": "application/json"}
@controller.put("/<id>") @controller.put("/<id>")
async def update_device(request, id): async def update_device(request, id):
"""Update a device.""" """Update a device."""
try: try:
data = request.json or {} raw = request.json or {}
if "tabs" in data and isinstance(data["tabs"], list): data = dict(raw)
data["tabs"] = [str(t) for t in data["tabs"]] data.pop("id", None)
data.pop("addresses", None)
data.pop("connected", None)
if "name" in data:
n = (data.get("name") or "").strip()
if not n:
return json.dumps({"error": "name cannot be empty"}), 400, {
"Content-Type": "application/json",
}
data["name"] = n
if "type" in data:
data["type"] = validate_device_type(data.get("type"))
if "transport" in data:
data["transport"] = validate_device_transport(data.get("transport"))
if "zones" in data and isinstance(data["zones"], list):
data["zones"] = [str(t) for t in data["zones"]]
if devices.update(id, data): if devices.update(id, data):
return json.dumps(devices.read(id)), 200, {"Content-Type": "application/json"} return json.dumps(devices.read(id)), 200, {"Content-Type": "application/json"}
return json.dumps({"error": "Device not found"}), 404 return json.dumps({"error": "Device not found"}), 404, {
"Content-Type": "application/json",
}
except ValueError as e:
return json.dumps({"error": str(e)}), 400, {"Content-Type": "application/json"}
except Exception as e: except Exception as e:
return json.dumps({"error": str(e)}), 400 return json.dumps({"error": str(e)}), 400, {"Content-Type": "application/json"}
@controller.delete("/<id>") @controller.delete("/<id>")
async def delete_device(request, id): async def delete_device(request, id):
"""Delete a device.""" """Delete a device."""
if devices.delete(id): if devices.delete(id):
return json.dumps({"message": "Device deleted successfully"}), 200 return (
return json.dumps({"error": "Device not found"}), 404 json.dumps({"message": "Device deleted successfully"}),
200,
{"Content-Type": "application/json"},
)
return json.dumps({"error": "Device not found"}), 404, {
"Content-Type": "application/json",
}
@controller.post("/<id>/identify")
async def identify_device(request, id):
"""
One v1 JSON object: ``presets.__identify`` (``d``=50 ms → 10 Hz blink) plus ``select`` for
this device name — same combined shape as profile sends the driver already accepts over TCP
/ ESP-NOW. No ``save``. After ``IDENTIFY_OFF_DELAY_S``, a background task selects ``off``.
"""
dev = devices.read(id)
if not dev:
return json.dumps({"error": "Device not found"}), 404, {
"Content-Type": "application/json",
}
sender = get_current_sender()
if not sender:
return json.dumps({"error": "Transport not configured"}), 503, {
"Content-Type": "application/json",
}
name = str(dev.get("name") or "").strip()
if not name:
return json.dumps({"error": "Device must have a name to identify"}), 400, {
"Content-Type": "application/json",
}
transport = dev.get("transport") or "espnow"
wifi_ip = None
if transport == "wifi":
wifi_ip = dev.get("address")
if not wifi_ip:
return json.dumps({"error": "Device has no IP address"}), 400, {
"Content-Type": "application/json",
}
try:
msg = _compact_v1_json(
presets={_IDENTIFY_PRESET_KEY: dict(_IDENTIFY_DRIVER_PRESET)},
select={name: [_IDENTIFY_PRESET_KEY]},
)
if transport == "wifi":
ok = await send_json_line_to_ip(wifi_ip, msg)
if not ok:
return json.dumps({"error": "Wi-Fi driver not connected"}), 503, {
"Content-Type": "application/json",
}
else:
await sender.send(msg, addr=id)
asyncio.create_task(
_identify_send_off_after_delay(sender, transport, wifi_ip, id, name)
)
except Exception as e:
return json.dumps({"error": str(e)}), 503, {"Content-Type": "application/json"}
return json.dumps({"message": "Identify sent"}), 200, {
"Content-Type": "application/json",
}
@controller.post("/<id>/patterns/push")
async def push_patterns_ota(request, id):
"""
Push all local pattern files directly to a Wi-Fi LED driver over HTTP upload.
"""
dev = devices.read(id)
if not dev:
return json.dumps({"error": "Device not found"}), 404, {
"Content-Type": "application/json",
}
if (dev.get("transport") or "").lower() != "wifi":
return json.dumps({"error": "Pattern OTA push is only supported for Wi-Fi devices"}), 400, {
"Content-Type": "application/json",
}
wifi_ip = str(dev.get("address") or "").strip()
if not wifi_ip:
return json.dumps({"error": "Device has no IP address"}), 400, {
"Content-Type": "application/json",
}
base_dir = driver_patterns_dir()
try:
names = sorted(os.listdir(base_dir))
except OSError as e:
return json.dumps({"error": str(e)}), 500, {
"Content-Type": "application/json",
}
files = [n for n in names if _safe_pattern_filename(n) and n != "__init__.py"]
if not files:
return json.dumps({"error": "No pattern files found"}), 404, {
"Content-Type": "application/json",
}
sent = []
failed = []
total = len(files)
for idx, filename in enumerate(files):
path = os.path.join(base_dir, filename)
try:
with open(path, "r") as f:
code = f.read()
except OSError:
failed.append(filename)
continue
reload_patterns = idx == (total - 1)
ok = _http_post_pattern_source(
wifi_ip,
filename,
code,
reload_patterns=reload_patterns,
timeout_s=10.0,
)
if ok:
sent.append(filename)
else:
failed.append(filename)
if not sent:
return json.dumps({"error": "Wi-Fi driver did not accept pattern uploads", "failed": failed}), 503, {
"Content-Type": "application/json",
}
return json.dumps({
"message": "Pattern files uploaded",
"sent_count": len(sent),
"sent": sent,
"failed": failed,
}), 200, {
"Content-Type": "application/json",
}
+189
View File
@@ -0,0 +1,189 @@
import json
import os
import subprocess
import sys
from microdot import Microdot
from serial.tools import list_ports
controller = Microdot()
def _repo_root() -> str:
return os.path.abspath(os.path.join(os.path.dirname(__file__), "..", ".."))
def _led_cli_path() -> str:
return os.path.join(_repo_root(), "led-tool", "cli.py")
def _build_led_cli_command(port: str, payload: dict):
cmd = [sys.executable, _led_cli_path(), "--port", port]
flag_map = (
("name", "--name"),
("led_pin", "--pin"),
("num_leds", "--leds"),
("brightness", "--brightness"),
("transport", "--transport"),
("ssid", "--ssid"),
("password", "--wifi-password"),
("wifi_channel", "--wifi-channel"),
("default", "--default"),
)
for key, flag in flag_map:
value = payload.get(key)
if value is None:
continue
value_str = str(value).strip()
if value_str == "":
continue
cmd.extend([flag, value_str])
return cmd
def _run_led_cli_command(cmd, cli_path: str, timeout_s=180):
try:
result = subprocess.run(
cmd,
capture_output=True,
text=True,
timeout=timeout_s,
cwd=os.path.dirname(cli_path),
)
except subprocess.TimeoutExpired:
return (
json.dumps({"error": "led-tool command timed out after 180 seconds"}),
504,
{"Content-Type": "application/json"},
)
except Exception as exc:
return (
json.dumps({"error": str(exc)}),
500,
{"Content-Type": "application/json"},
)
return (
json.dumps(
{
"ok": result.returncode == 0,
"returncode": result.returncode,
"stdout": result.stdout,
"stderr": result.stderr,
"command": cmd,
}
),
200,
{"Content-Type": "application/json"},
)
def _extract_settings_from_stdout(stdout: str):
text = (stdout or "").strip()
if not text:
return None
try:
parsed = json.loads(text)
return parsed if isinstance(parsed, dict) else None
except Exception:
return None
@controller.get("/ports")
async def list_serial_ports(request):
ports = []
for info in list_ports.comports():
ports.append(
{
"device": info.device,
"description": info.description,
"hwid": info.hwid,
}
)
return (
json.dumps(
{
"ports": ports,
"led_cli_exists": os.path.exists(_led_cli_path()),
}
),
200,
{"Content-Type": "application/json"},
)
@controller.post("/settings")
async def apply_settings(request):
data = request.json or {}
port = str(data.get("port") or "").strip()
if not port:
return (
json.dumps({"error": "port is required"}),
400,
{"Content-Type": "application/json"},
)
cli_path = _led_cli_path()
if not os.path.exists(cli_path):
return (
json.dumps({"error": "led-tool/cli.py not found"}),
500,
{"Content-Type": "application/json"},
)
cmd = _build_led_cli_command(port, data) + ["--follow"]
return _run_led_cli_command(cmd, cli_path, timeout_s=None)
@controller.post("/reset")
@controller.post("/reset/")
async def reset_device(request):
data = request.json or {}
port = str(data.get("port") or "").strip()
if not port:
return (
json.dumps({"error": "port is required"}),
400,
{"Content-Type": "application/json"},
)
cli_path = _led_cli_path()
if not os.path.exists(cli_path):
return (
json.dumps({"error": "led-tool/cli.py not found"}),
500,
{"Content-Type": "application/json"},
)
cmd = [sys.executable, cli_path, "--port", port, "--reset", "--follow"]
return _run_led_cli_command(cmd, cli_path, timeout_s=None)
@controller.get("/settings")
async def read_settings(request):
port = str(request.args.get("port") or "").strip()
if not port:
return (
json.dumps({"error": "port is required"}),
400,
{"Content-Type": "application/json"},
)
cli_path = _led_cli_path()
if not os.path.exists(cli_path):
return (
json.dumps({"error": "led-tool/cli.py not found"}),
500,
{"Content-Type": "application/json"},
)
cmd = [sys.executable, cli_path, "--port", port, "--show"]
body, status, headers = _run_led_cli_command(cmd, cli_path)
if status != 200:
return body, status, headers
data = json.loads(body)
data["settings"] = _extract_settings_from_stdout(data.get("stdout") or "")
return json.dumps(data), status, headers
+85
View File
@@ -0,0 +1,85 @@
from microdot import Microdot
from models.output import Output
from engine.outputs import open_output
import asyncio
import json
controller = Microdot()
outputs = Output()
_JSON = {'Content-Type': 'application/json'}
TEST_COLORS = ((255, 0, 0), (0, 255, 0), (0, 0, 255), (255, 255, 255))
async def run_output_test(out, step_s=1.0):
"""Red, green, blue, white for ``step_s`` each, then black."""
await out.open()
try:
for color in TEST_COLORS:
frame = bytes(color) * out.pixel_count
end = asyncio.get_running_loop().time() + step_s
while asyncio.get_running_loop().time() < end:
await out.send(frame)
await asyncio.sleep(1.0 / out.fps)
finally:
await out.close()
return out.status()
@controller.get('')
async def list_outputs(request):
"""List all pixel outputs."""
return json.dumps(outputs), 200, _JSON
@controller.get('/<id>')
async def get_output(request, id):
doc = outputs.read(id)
if doc:
return json.dumps(doc), 200, _JSON
return json.dumps({"error": "Output not found"}), 404, _JSON
@controller.post('')
async def create_output(request):
try:
output_id = outputs.create(request.json or {})
return json.dumps(outputs.read(output_id)), 201, _JSON
except ValueError as e:
return json.dumps({"error": str(e)}), 400, _JSON
@controller.put('/<id>')
async def update_output(request, id):
try:
if outputs.update(id, request.json or {}):
return json.dumps(outputs.read(id)), 200, _JSON
return json.dumps({"error": "Output not found"}), 404, _JSON
except ValueError as e:
return json.dumps({"error": str(e)}), 400, _JSON
@controller.delete('/<id>')
async def delete_output(request, id):
if outputs.delete(id):
return json.dumps({"message": "Output deleted successfully"}), 200, _JSON
return json.dumps({"error": "Output not found"}), 404, _JSON
@controller.post('/<id>/test')
async def test_output(request, id):
"""Send a short red/green/blue/white test sequence, then black."""
doc = outputs.read(id)
if not doc:
return json.dumps({"error": "Output not found"}), 404, _JSON
data = request.json or {}
try:
step_s = max(0.1, min(5.0, float(data.get("step_s", 1.0))))
except (TypeError, ValueError):
step_s = 1.0
try:
status = await run_output_test(open_output(doc), step_s=step_s)
except Exception as e:
return json.dumps({"error": f"Test failed: {e}"}), 503, _JSON
return json.dumps({"message": "Test sent", "status": status}), 200, _JSON
+436 -13
View File
@@ -1,19 +1,113 @@
from microdot import Microdot from microdot import Microdot
from models.pattern import Pattern from models.pattern import Pattern
from models.device import Device
from util.driver_patterns import (
driver_patterns_dir,
is_firmware_builtin_pattern_module,
normalize_pattern_py_filename,
)
import json import json
import sys import re
import os
import socket
from urllib.parse import quote
controller = Microdot() controller = Microdot()
patterns = Pattern() patterns = Pattern()
def _project_root():
"""Project root (parent of ``src/``). CWD is often ``src/`` when running ``main.py``."""
here = os.path.dirname(os.path.abspath(__file__))
return os.path.abspath(os.path.join(here, "..", ".."))
def _safe_pattern_filename(name):
if not isinstance(name, str):
return False
if not name.endswith(".py"):
return False
if "/" in name or "\\" in name or ".." in name:
return False
return True
_PATTERN_KEY_RE = re.compile(r"^[a-zA-Z_][a-zA-Z0-9_]{0,63}$")
def _normalize_pattern_key(raw):
"""Pattern id / module basename (no .py)."""
if not isinstance(raw, str):
return ""
s = raw.strip()
if s.lower().endswith(".py"):
s = s[:-3].strip()
return s
def _valid_pattern_key(key):
return bool(key and _PATTERN_KEY_RE.match(key))
def _http_post_pattern_source(ip, filename, code_text, reload_patterns=True, timeout_s=10.0):
"""POST source to driver /patterns/upload?name=...&reload=...; return True on 2xx."""
if not isinstance(ip, str) or not ip.strip():
return False
if not isinstance(filename, str) or not filename:
return False
if not isinstance(code_text, str):
return False
name_q = quote(filename, safe="")
reload_q = "1" if reload_patterns else "0"
path = "/patterns/upload?name=%s&reload=%s" % (name_q, reload_q)
body = code_text.encode("utf-8")
req = (
"POST %s HTTP/1.1\r\n"
"Host: %s\r\n"
"Content-Type: text/plain; charset=utf-8\r\n"
"Content-Length: %d\r\n"
"Connection: close\r\n"
"\r\n" % (path, ip, len(body))
).encode("utf-8") + body
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
try:
sock.settimeout(timeout_s)
sock.connect((ip.strip(), 80))
sock.sendall(req)
data = b""
while True:
chunk = sock.recv(1024)
if not chunk:
break
data += chunk
except OSError:
return False
finally:
try:
sock.close()
except Exception:
pass
first_line = data.split(b"\r\n", 1)[0] if data else b""
# Accept any 2xx status.
return b" 2" in first_line
def load_pattern_definitions(): def load_pattern_definitions():
"""Load pattern definitions from pattern.json file.""" """Load pattern definitions from pattern.json file."""
try: try:
# Try different paths for local development vs MicroPython root = _project_root()
paths = ['db/pattern.json', 'pattern.json', '/db/pattern.json'] paths = [
os.path.join(root, "db", "pattern.json"),
os.path.join(root, "pattern.json"),
"db/pattern.json",
"pattern.json",
"/db/pattern.json",
]
for path in paths: for path in paths:
try: try:
with open(path, 'r') as f: with open(path, "r") as f:
return json.load(f) return json.load(f)
except OSError: except OSError:
continue continue
@@ -22,16 +116,333 @@ def load_pattern_definitions():
print(f"Error loading pattern.json: {e}") print(f"Error loading pattern.json: {e}")
return {} return {}
def load_driver_pattern_names():
"""List available pattern module names from led-driver/src/patterns."""
try:
names = []
for filename in os.listdir(driver_patterns_dir()):
if not _safe_pattern_filename(filename) or filename == "__init__.py":
continue
names.append(filename[:-3])
names.sort()
return names
except OSError:
return []
def build_runtime_pattern_map():
"""
Runtime pattern map for UI menus.
Keep pattern DB metadata as primary, then add any local driver pattern files
missing from the DB so new OTA files still appear in menus.
"""
definitions = load_pattern_definitions()
available = load_driver_pattern_names()
result = {}
for name, meta in definitions.items():
result[name] = dict(meta) if isinstance(meta, dict) else {}
for name in available:
if name not in result:
result[name] = {}
return result
@controller.get('/definitions') @controller.get('/definitions')
async def get_pattern_definitions(request): async def get_pattern_definitions(request):
"""Get pattern definitions from pattern.json.""" """Get definitions for patterns currently available on the driver."""
definitions = load_pattern_definitions() definitions = build_runtime_pattern_map()
return json.dumps(definitions), 200, {'Content-Type': 'application/json'} return json.dumps(definitions), 200, {'Content-Type': 'application/json'}
@controller.get('/ota/manifest')
async def ota_manifest(request):
"""Manifest of driver pattern source files for OTA pulls."""
base_dir = driver_patterns_dir()
host = request.headers.get("Host", "")
if not host:
return json.dumps({"error": "Missing Host header"}), 400, {
"Content-Type": "application/json"
}
try:
names = sorted(os.listdir(base_dir))
except OSError as e:
return json.dumps({"error": str(e)}), 500, {"Content-Type": "application/json"}
files = []
for name in names:
if not _safe_pattern_filename(name) or name == "__init__.py":
continue
files.append({
"name": name,
"url": "http://%s/patterns/ota/file/%s" % (host, name),
})
return json.dumps({"files": files}), 200, {"Content-Type": "application/json"}
@controller.get('/ota/file/<name>')
async def ota_pattern_file(request, name):
"""Serve one driver pattern source file for OTA pulls."""
fname = normalize_pattern_py_filename(name)
if not fname or not _safe_pattern_filename(fname) or fname == "__init__.py":
return json.dumps({"error": "Invalid filename"}), 400, {
"Content-Type": "application/json"
}
if is_firmware_builtin_pattern_module(fname):
return json.dumps(
{
"error": "on and off are built into the driver firmware; there is no module file to serve.",
}
), 400, {
"Content-Type": "application/json"
}
base = driver_patterns_dir()
path = os.path.join(base, fname)
try:
with open(path, "r") as f:
content = f.read()
except OSError:
return json.dumps(
{
"error": "Pattern file not found",
"path": path,
"hint": "Ensure led-driver is present or set LED_CONTROLLER_PATTERNS_DIR.",
}
), 404, {
"Content-Type": "application/json"
}
return content, 200, {"Content-Type": "text/plain; charset=utf-8"}
@controller.post('/<name>/send')
async def send_pattern_to_device(request, name):
"""Push one pattern source file directly to Wi-Fi driver(s) over HTTP."""
if not isinstance(name, str):
return json.dumps({"error": "Invalid pattern name"}), 400, {
"Content-Type": "application/json"
}
filename = normalize_pattern_py_filename(name)
if not filename or not _safe_pattern_filename(filename) or filename == "__init__.py":
return json.dumps({"error": "Invalid pattern filename"}), 400, {
"Content-Type": "application/json"
}
if is_firmware_builtin_pattern_module(filename):
return json.dumps(
{
"error": "on and off are built into the driver firmware; send does not apply.",
}
), 400, {
"Content-Type": "application/json"
}
devices = Device()
body = request.json or {}
requested_device_id = str(body.get("device_id") or "").strip()
base = driver_patterns_dir()
path = os.path.join(base, filename)
if not os.path.exists(path):
return json.dumps(
{
"error": "Pattern file not found",
"path": path,
"hint": "Ensure led-driver is present or set LED_CONTROLLER_PATTERNS_DIR.",
}
), 404, {
"Content-Type": "application/json"
}
try:
with open(path, "r") as f:
source = f.read()
except OSError as e:
return json.dumps({"error": str(e)}), 500, {"Content-Type": "application/json"}
target_ids = []
if requested_device_id:
dev = devices.read(requested_device_id)
if not dev:
return json.dumps({"error": "Device not found"}), 404, {
"Content-Type": "application/json"
}
if (dev.get("transport") or "").lower() != "wifi":
return json.dumps({"error": "Pattern send is only supported for Wi-Fi devices"}), 400, {
"Content-Type": "application/json"
}
target_ids = [requested_device_id]
else:
for did in devices.list():
dev = devices.read(did) or {}
if (dev.get("transport") or "").lower() == "wifi":
target_ids.append(str(did))
if not target_ids:
return json.dumps({"error": "No Wi-Fi devices found"}), 404, {
"Content-Type": "application/json"
}
sent_ids = []
for did in target_ids:
dev = devices.read(did) or {}
ip = str(dev.get("address") or "").strip()
if not ip:
continue
ok = _http_post_pattern_source(ip, filename, source, reload_patterns=True, timeout_s=10.0)
if ok:
sent_ids.append(did)
if not sent_ids:
return json.dumps({"error": "No Wi-Fi drivers accepted pattern upload"}), 503, {
"Content-Type": "application/json"
}
return json.dumps({"message": "Pattern sent", "pattern": filename, "device_ids": sent_ids, "sent_count": len(sent_ids)}), 200, {
"Content-Type": "application/json"
}
@controller.post('/upload')
async def upload_pattern_file(request):
"""
Upload a pattern source file to led-controller local storage.
Body JSON:
{
"name": "sparkle.py" | "sparkle",
"code": "class Sparkle: ...",
"overwrite": true | false # optional, default true
}
"""
data = request.json or {}
raw_name = data.get("name") or data.get("filename")
code = data.get("code")
overwrite = data.get("overwrite", True)
overwrite = bool(overwrite)
if not isinstance(raw_name, str) or not raw_name.strip():
return json.dumps({"error": "name is required"}), 400, {
"Content-Type": "application/json"
}
filename = raw_name.strip()
if not filename.endswith(".py"):
filename += ".py"
if not _safe_pattern_filename(filename) or filename == "__init__.py":
return json.dumps({"error": "invalid pattern filename"}), 400, {
"Content-Type": "application/json"
}
if is_firmware_builtin_pattern_module(filename):
return json.dumps(
{"error": "on and off are built into the driver firmware; use a different pattern name."}
), 400, {
"Content-Type": "application/json"
}
if not isinstance(code, str) or not code.strip():
return json.dumps({"error": "code is required"}), 400, {
"Content-Type": "application/json"
}
path = os.path.join(driver_patterns_dir(), filename)
exists = os.path.exists(path)
if exists and not overwrite:
return json.dumps({"error": "pattern file already exists", "name": filename}), 409, {
"Content-Type": "application/json"
}
try:
with open(path, "w") as f:
f.write(code)
except OSError as e:
return json.dumps({"error": str(e)}), 500, {"Content-Type": "application/json"}
return json.dumps({
"message": "Pattern uploaded",
"name": filename,
"overwrote": bool(exists),
}), 201, {"Content-Type": "application/json"}
@controller.post('/driver')
async def create_driver_pattern(request):
"""
Create a driver pattern: save ``.py`` under led-driver/src/patterns and
metadata in db/pattern.json (Pattern model).
Body JSON:
name, code (required),
min_delay, max_delay, max_colors (optional numbers),
n1..n8 (optional string labels),
overwrite (optional, default true).
"""
data = request.json or {}
key = _normalize_pattern_key(data.get("name") or "")
if not _valid_pattern_key(key):
return json.dumps({
"error": "name must be a valid Python identifier (e.g. sparkle, my_pattern)",
}), 400, {"Content-Type": "application/json"}
if is_firmware_builtin_pattern_module(key):
return json.dumps(
{"error": "on and off are built into the driver firmware; use a different pattern name."}
), 400, {
"Content-Type": "application/json"
}
code = data.get("code")
if not isinstance(code, str) or not code.strip():
return json.dumps({"error": "code is required (upload a .py file or paste source)"}), 400, {
"Content-Type": "application/json"
}
overwrite = bool(data.get("overwrite", True))
filename = key + ".py"
py_path = os.path.join(driver_patterns_dir(), filename)
if os.path.exists(py_path) and not overwrite:
return json.dumps({"error": "pattern file already exists", "name": filename}), 409, {
"Content-Type": "application/json"
}
meta = {}
for fld in ("min_delay", "max_delay", "max_colors"):
if fld not in data:
continue
try:
meta[fld] = int(data[fld])
except (TypeError, ValueError):
return json.dumps({"error": "%s must be an integer" % fld}), 400, {
"Content-Type": "application/json"
}
for i in range(1, 9):
nk = "n%d" % i
if nk not in data:
continue
lab = data[nk]
if lab is None:
continue
s = str(lab).strip()
if s:
meta[nk] = s
try:
with open(py_path, "w") as f:
f.write(code)
except OSError as e:
return json.dumps({"error": str(e)}), 500, {"Content-Type": "application/json"}
if patterns.read(key):
patterns.update(key, meta)
else:
patterns.create(key, meta)
return json.dumps({
"message": "Pattern created",
"name": key,
"file": filename,
"metadata": patterns.read(key),
}), 201, {"Content-Type": "application/json"}
@controller.get('') @controller.get('')
async def list_patterns(request): async def list_patterns(request):
"""List all patterns.""" """List patterns for UI (DB metadata + local driver additions)."""
return json.dumps(patterns), 200, {'Content-Type': 'application/json'} return json.dumps(build_runtime_pattern_map()), 200, {'Content-Type': 'application/json'}
@controller.get('/<id>') @controller.get('/<id>')
@@ -47,11 +458,23 @@ async def get_pattern(request, id):
async def create_pattern(request): async def create_pattern(request):
"""Create a new pattern.""" """Create a new pattern."""
try: try:
data = request.json or {} payload = request.json or {}
name = data.get("name", "") name = payload.get("name", "")
pattern_id = patterns.create(name, data.get("data", {})) pattern_data = payload.get("data", {})
if data:
patterns.update(pattern_id, data) # IMPORTANT:
# `patterns.create()` stores `pattern_data` as the underlying dict value.
# If we then call `patterns.update(pattern_id, payload)` with the full
# request object, it may assign `payload["data"]` back onto that same
# dict object, creating a circular reference (json.dumps fails).
pattern_id = patterns.create(name, pattern_data)
# Only merge "extra" metadata fields (anything except name/data).
extra = dict(payload)
extra.pop("name", None)
extra.pop("data", None)
if extra:
patterns.update(pattern_id, extra)
return json.dumps(patterns.read(pattern_id)), 201, {'Content-Type': 'application/json'} return json.dumps(patterns.read(pattern_id)), 201, {'Content-Type': 'application/json'}
except Exception as e: except Exception as e:
return json.dumps({"error": str(e)}), 400 return json.dumps({"error": str(e)}), 400
+130 -31
View File
@@ -2,9 +2,10 @@ from microdot import Microdot
from microdot.session import with_session from microdot.session import with_session
from models.preset import Preset from models.preset import Preset
from models.profile import Profile from models.profile import Profile
from models.device import Device, normalize_mac
from models.transport import get_current_sender from models.transport import get_current_sender
from util.driver_delivery import deliver_json_messages, deliver_preset_broadcast_then_per_device
from util.espnow_message import build_message, build_preset_dict from util.espnow_message import build_message, build_preset_dict
import asyncio
import json import json
controller = Microdot() controller = Microdot()
@@ -125,13 +126,17 @@ async def delete_preset(request, *args, **kwargs):
@with_session @with_session
async def send_presets(request, session): async def send_presets(request, session):
""" """
Send one or more presets to the LED driver (via serial transport). Send one or more presets to LED drivers (serial/ESP-NOW and/or TCP Wi-Fi clients).
Body JSON: Body JSON:
{"preset_ids": ["1", "2", ...]} or {"ids": ["1", "2", ...]} {"preset_ids": ["1", "2", ...]} or {"ids": ["1", "2", ...]}
Optional "targets": ["aabbccddeeff", ...] — registry MACs. When set: preset
chunks are ESP-NOW broadcast once each; Wi-Fi drivers get the same chunks
over TCP; if "default" is set, each target then gets a unicast default
message (serial or TCP) with that device name in "targets".
Omit targets for broadcast-only serial (legacy).
The controller looks up each preset, converts to API format, chunks into Optional "destination_mac" / "to": single MAC when targets is omitted.
<= 240-byte messages, and sends them over the configured transport.
""" """
try: try:
data = request.json or {} data = request.json or {}
@@ -144,7 +149,6 @@ async def send_presets(request, session):
save_flag = data.get('save', True) save_flag = data.get('save', True)
save_flag = bool(save_flag) save_flag = bool(save_flag)
default_id = data.get('default') default_id = data.get('default')
# Optional 12-char hex MAC to send to one device; omit for default (e.g. broadcast).
destination_mac = data.get('destination_mac') or data.get('to') destination_mac = data.get('destination_mac') or data.get('to')
# Build API-compliant preset map keyed by preset ID, include name # Build API-compliant preset map keyed by preset ID, include name
@@ -171,23 +175,13 @@ async def send_presets(request, session):
if not sender: if not sender:
return json.dumps({"error": "Transport not configured"}), 503, {'Content-Type': 'application/json'} return json.dumps({"error": "Transport not configured"}), 503, {'Content-Type': 'application/json'}
async def send_chunk(chunk_presets, is_last):
# Save/default should only be sent with the final presets chunk.
msg = build_message(
presets=chunk_presets,
save=save_flag and is_last,
default=default_id if is_last else None,
)
await sender.send(msg, addr=destination_mac)
MAX_BYTES = 240 MAX_BYTES = 240
send_delay_s = 0.1 send_delay_s = 0.1
entries = list(presets_by_name.items()) entries = list(presets_by_name.items())
total_presets = len(entries) total_presets = len(entries)
messages_sent = 0
batch = {} batch = {}
last_msg = None chunk_messages = []
for name, preset_obj in entries: for name, preset_obj in entries:
test_batch = dict(batch) test_batch = dict(batch)
test_batch[name] = preset_obj test_batch[name] = preset_obj
@@ -196,28 +190,133 @@ async def send_presets(request, session):
if size <= MAX_BYTES or not batch: if size <= MAX_BYTES or not batch:
batch = test_batch batch = test_batch
last_msg = test_msg
else: else:
try: chunk_messages.append(
await send_chunk(batch, False) build_message(
except Exception: presets=dict(batch),
return json.dumps({"error": "Send failed"}), 503, {'Content-Type': 'application/json'} save=False,
await asyncio.sleep(send_delay_s) default=None,
messages_sent += 1 )
)
batch = {name: preset_obj} batch = {name: preset_obj}
last_msg = build_message(presets=batch, save=save_flag, default=default_id)
if batch: if batch:
try: chunk_messages.append(
await send_chunk(batch, True) build_message(
except Exception: presets=dict(batch),
return json.dumps({"error": "Send failed"}), 503, {'Content-Type': 'application/json'} save=save_flag,
await asyncio.sleep(send_delay_s) default=default_id,
messages_sent += 1 )
)
target_list = None
raw_targets = data.get("targets")
if isinstance(raw_targets, list) and raw_targets:
target_list = []
for t in raw_targets:
m = normalize_mac(str(t))
if m:
target_list.append(m)
target_list = list(dict.fromkeys(target_list))
if not target_list:
target_list = None
elif destination_mac:
dm = normalize_mac(str(destination_mac))
target_list = [dm] if dm else None
try:
if target_list:
deliveries = await deliver_preset_broadcast_then_per_device(
sender,
chunk_messages,
target_list,
Device(),
str(default_id) if default_id is not None else None,
delay_s=send_delay_s,
)
else:
deliveries, _chunks = await deliver_json_messages(
sender,
chunk_messages,
None,
Device(),
delay_s=send_delay_s,
)
except Exception:
return json.dumps({"error": "Send failed"}), 503, {'Content-Type': 'application/json'}
return json.dumps({ return json.dumps({
"message": "Presets sent", "message": "Presets sent",
"presets_sent": total_presets, "presets_sent": total_presets,
"messages_sent": messages_sent "messages_sent": deliveries,
}), 200, {'Content-Type': 'application/json'}
@controller.post('/push')
@with_session
async def push_driver_messages(request, session):
"""
Deliver one or more raw v1 JSON objects to devices (ESP-NOW and/or TCP).
Body:
{"sequence": [{ "v": "1", ... }, ...], "targets": ["mac", ...]}
or a single {"payload": {...}, "targets": [...]}.
"""
try:
data = request.json or {}
except Exception:
return json.dumps({"error": "Invalid JSON"}), 400, {'Content-Type': 'application/json'}
seq = data.get("sequence")
if not seq and data.get("payload") is not None:
seq = [data["payload"]]
if not isinstance(seq, list) or not seq:
return json.dumps({"error": "sequence or payload required"}), 400, {'Content-Type': 'application/json'}
raw_targets = data.get("targets")
target_list = None
if isinstance(raw_targets, list) and raw_targets:
target_list = []
for t in raw_targets:
m = normalize_mac(str(t))
if m:
target_list.append(m)
target_list = list(dict.fromkeys(target_list))
if not target_list:
target_list = None
sender = get_current_sender()
if not sender:
return json.dumps({"error": "Transport not configured"}), 503, {'Content-Type': 'application/json'}
messages = []
for item in seq:
if isinstance(item, dict):
messages.append(json.dumps(item))
elif isinstance(item, str):
messages.append(item)
else:
return json.dumps({"error": "sequence items must be objects or strings"}), 400, {'Content-Type': 'application/json'}
delay_s = data.get("delay_s", 0.05)
try:
delay_s = float(delay_s)
except (TypeError, ValueError):
delay_s = 0.05
try:
deliveries, _chunks = await deliver_json_messages(
sender,
messages,
target_list,
Device(),
delay_s=delay_s,
)
except Exception:
return json.dumps({"error": "Send failed"}), 503, {'Content-Type': 'application/json'}
return json.dumps({
"message": "Delivered",
"deliveries": deliveries,
}), 200, {'Content-Type': 'application/json'} }), 200, {'Content-Type': 'application/json'}
+71 -29
View File
@@ -1,13 +1,13 @@
from microdot import Microdot from microdot import Microdot
from microdot.session import with_session from microdot.session import with_session
from models.profile import Profile from models.profile import Profile
from models.tab import Tab from models.zone import Zone
from models.preset import Preset from models.preset import Preset
import json import json
controller = Microdot() controller = Microdot()
profiles = Profile() profiles = Profile()
tabs = Tab() zones = Zone()
presets = Preset() presets = Preset()
@controller.get('') @controller.get('')
@@ -83,20 +83,20 @@ async def create_profile(request):
try: try:
data = dict(request.json or {}) data = dict(request.json or {})
name = data.get("name", "") name = data.get("name", "")
seed_raw = data.get("seed_dj_tab", False) seed_raw = data.get("seed_dj_zone", False)
if isinstance(seed_raw, str): if isinstance(seed_raw, str):
seed_dj_tab = seed_raw.strip().lower() in ("1", "true", "yes", "on") seed_dj_zone = seed_raw.strip().lower() in ("1", "true", "yes", "on")
else: else:
seed_dj_tab = bool(seed_raw) seed_dj_zone = bool(seed_raw)
# Request-only flag: do not persist on profile records. # Request-only flag: do not persist on profile records.
data.pop("seed_dj_tab", None) data.pop("seed_dj_zone", None)
profile_id = profiles.create(name) profile_id = profiles.create(name)
# Avoid persisting request-only fields. # Avoid persisting request-only fields.
data.pop("name", None) data.pop("name", None)
if data: if data:
profiles.update(profile_id, data) profiles.update(profile_id, data)
# New profiles always start with a default tab pre-populated with starter presets. # New profiles always start with a default zone pre-populated with starter presets.
default_preset_ids = [] default_preset_ids = []
default_preset_defs = [ default_preset_defs = [
{ {
@@ -124,6 +124,15 @@ async def create_profile(request):
"auto": True, "auto": True,
"n1": 2, "n1": 2,
}, },
{
"name": "Colour Cycle",
"pattern": "colour_cycle",
"colors": ["#FF0000", "#00FF00", "#0000FF"],
"brightness": 255,
"delay": 100,
"auto": True,
"n1": 1,
},
{ {
"name": "transition", "name": "transition",
"pattern": "transition", "pattern": "transition",
@@ -132,6 +141,39 @@ async def create_profile(request):
"delay": 500, "delay": 500,
"auto": True, "auto": True,
}, },
{
"name": "flicker",
"pattern": "flicker",
"colors": ["#FFB84D"],
"brightness": 255,
"delay": 80,
"auto": True,
"n1": 30,
},
{
"name": "flame",
"pattern": "flame",
"colors": [],
"brightness": 255,
"delay": 50,
"auto": True,
"n1": 35,
"n2": 2600,
"n3": 0,
"n4": 0,
},
{
"name": "twinkle",
"pattern": "twinkle",
"colors": ["#78C8FF", "#508CFF", "#B478FF", "#64DCE8", "#A0C8FF"],
"brightness": 255,
"delay": 55,
"auto": True,
"n1": 72,
"n2": 140,
"n3": 2,
"n4": 6,
},
] ]
for preset_data in default_preset_defs: for preset_data in default_preset_defs:
@@ -139,18 +181,18 @@ async def create_profile(request):
presets.update(pid, preset_data) presets.update(pid, preset_data)
default_preset_ids.append(str(pid)) default_preset_ids.append(str(pid))
default_tab_id = tabs.create(name="default", names=["1"], presets=[default_preset_ids]) default_tab_id = zones.create(name="default", names=["1"], presets=[default_preset_ids])
tabs.update(default_tab_id, { zones.update(default_tab_id, {
"presets_flat": default_preset_ids, "presets_flat": default_preset_ids,
"default_preset": default_preset_ids[0] if default_preset_ids else None, "default_preset": default_preset_ids[0] if default_preset_ids else None,
}) })
profile = profiles.read(profile_id) or {} profile = profiles.read(profile_id) or {}
profile_tabs = profile.get("tabs", []) if isinstance(profile.get("tabs", []), list) else [] profile_tabs = profile.get("zones", []) if isinstance(profile.get("zones", []), list) else []
profile_tabs.append(str(default_tab_id)) profile_tabs.append(str(default_tab_id))
if seed_dj_tab: if seed_dj_zone:
# Seed a DJ-focused tab with three starter presets. # Seed a DJ-focused zone with three starter presets.
seeded_preset_ids = [] seeded_preset_ids = []
preset_defs = [ preset_defs = [
{ {
@@ -182,15 +224,15 @@ async def create_profile(request):
presets.update(pid, preset_data) presets.update(pid, preset_data)
seeded_preset_ids.append(str(pid)) seeded_preset_ids.append(str(pid))
dj_tab_id = tabs.create(name="dj", names=["dj"], presets=[seeded_preset_ids]) dj_tab_id = zones.create(name="dj", names=["dj"], presets=[seeded_preset_ids])
tabs.update(dj_tab_id, { zones.update(dj_tab_id, {
"presets_flat": seeded_preset_ids, "presets_flat": seeded_preset_ids,
"default_preset": seeded_preset_ids[0] if seeded_preset_ids else None, "default_preset": seeded_preset_ids[0] if seeded_preset_ids else None,
}) })
profile_tabs.append(str(dj_tab_id)) profile_tabs.append(str(dj_tab_id))
profiles.update(profile_id, {"tabs": profile_tabs}) profiles.update(profile_id, {"zones": profile_tabs})
profile_data = profiles.read(profile_id) profile_data = profiles.read(profile_id)
return json.dumps({profile_id: profile_data}), 201, {'Content-Type': 'application/json'} return json.dumps({profile_id: profile_data}), 201, {'Content-Type': 'application/json'}
@@ -208,7 +250,7 @@ async def clone_profile(request, id):
data = request.json or {} data = request.json or {}
source_name = source.get("name") or f"Profile {id}" source_name = source.get("name") or f"Profile {id}"
new_name = data.get("name") or source_name new_name = data.get("name") or source_name
profile_type = source.get("type", "tabs") profile_type = source.get("type", "zones")
def allocate_id(model, cache): def allocate_id(model, cache):
if "next" not in cache: if "next" not in cache:
@@ -255,28 +297,28 @@ async def clone_profile(request, id):
palette_colors = [] palette_colors = []
# Clone tabs and presets used by those tabs # Clone tabs and presets used by those tabs
source_tabs = source.get("tabs") source_tabs = source.get("zones")
if not isinstance(source_tabs, list) or len(source_tabs) == 0: if not isinstance(source_tabs, list) or len(source_tabs) == 0:
source_tabs = source.get("tab_order", []) source_tabs = source.get("zone_order", [])
source_tabs = source_tabs or [] source_tabs = source_tabs or []
cloned_tab_ids = [] cloned_tab_ids = []
preset_id_map = {} preset_id_map = {}
new_tabs = {} new_tabs = {}
new_presets = {} new_presets = {}
for tab_id in source_tabs: for zone_id in source_tabs:
tab = tabs.read(tab_id) zone = zones.read(zone_id)
if not tab: if not zone:
continue continue
tab_name = tab.get("name") or f"Tab {tab_id}" tab_name = zone.get("name") or f"Zone {zone_id}"
clone_name = tab_name clone_name = tab_name
mapped_presets = map_preset_container(tab.get("presets"), preset_id_map, preset_cache, new_profile_id, new_presets) mapped_presets = map_preset_container(zone.get("presets"), preset_id_map, preset_cache, new_profile_id, new_presets)
clone_id = allocate_id(tabs, tab_cache) clone_id = allocate_id(zones, tab_cache)
clone_data = { clone_data = {
"name": clone_name, "name": clone_name,
"names": tab.get("names") or [], "names": zone.get("names") or [],
"presets": mapped_presets if mapped_presets is not None else [] "presets": mapped_presets if mapped_presets is not None else []
} }
extra = {k: v for k, v in tab.items() if k not in ("name", "names", "presets")} extra = {k: v for k, v in zone.items() if k not in ("name", "names", "presets")}
if "presets_flat" in extra: if "presets_flat" in extra:
extra["presets_flat"] = map_preset_container(extra.get("presets_flat"), preset_id_map, preset_cache, new_profile_id, new_presets) extra["presets_flat"] = map_preset_container(extra.get("presets_flat"), preset_id_map, preset_cache, new_profile_id, new_presets)
if extra: if extra:
@@ -287,7 +329,7 @@ async def clone_profile(request, id):
new_profile_data = { new_profile_data = {
"name": new_name, "name": new_name,
"type": profile_type, "type": profile_type,
"tabs": cloned_tab_ids, "zones": cloned_tab_ids,
"scenes": list(source.get("scenes", [])) if isinstance(source.get("scenes", []), list) else [], "scenes": list(source.get("scenes", [])) if isinstance(source.get("scenes", []), list) else [],
"palette_id": str(new_palette_id), "palette_id": str(new_palette_id),
} }
@@ -297,12 +339,12 @@ async def clone_profile(request, id):
for pid, pdata in new_presets.items(): for pid, pdata in new_presets.items():
presets[pid] = pdata presets[pid] = pdata
for tid, tdata in new_tabs.items(): for tid, tdata in new_tabs.items():
tabs[tid] = tdata zones[tid] = tdata
profiles[str(new_profile_id)] = new_profile_data profiles[str(new_profile_id)] = new_profile_data
profiles._palette_model.save() profiles._palette_model.save()
presets.save() presets.save()
tabs.save() zones.save()
profiles.save() profiles.save()
return json.dumps({new_profile_id: new_profile_data}), 201, {'Content-Type': 'application/json'} return json.dumps({new_profile_id: new_profile_data}), 201, {'Content-Type': 'application/json'}
Loaded 100 of 181 files, more files were not shown because too many files have changed in this diff. Show more