9 Commits
Author SHA1 Message Date
jimmyandClaude Haiku 5.5 a1c8ce853b feat: sequence window, finer timeline, zone brightness to Wi-Fi drivers
- A sequence's length is a fixed window (window_beats / window_seconds), not its presets.
  The timeline is exactly the window long; clips past it are cut on save.
- The ruler adds finer ticks when zoomed in; Snap has Auto (follows the zoom), 0.25 s and 0.05 s.
  Steps and the window go down to 50 ms.
- Ctrl+wheel zooms around the pointer; the zoom buttons zoom around the last pointer position.
- Sequence start and the zone brightness slider reach Wi-Fi drivers (matched by hostname or MAC).
- A preset select with brightness also sends the brightness to Wi-Fi drivers, as ESP-NOW does.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-16 21:22:17 +13:00
jimmyandClaude Opus 5.5 581b751904 feat: browser simulator served by the controller, desktop build, browser bridge
- led-simulator: the rig runs the C++ led-driver as WebAssembly (sim-driver/),
  one single-threaded worker per bar, no cross-origin isolation needed. Rooms
  (one JSON per room) with an on-page editor, and a pattern gallery. The
  Python server, Pyodide boot and ring buffer are removed.
- sim-controller sim_rig.c: serves /sim/ from an embedded pack, the page's
  WebSocket and the rooms/flash API. The desktop build embeds it too.
- bridge.c: a "browser" bridge kind that carries ESP-NOW frames to the page;
  devices announced through it are marked sim.
- UI: Simulator in the Menu, split view with resize and pop-out, swipe
  between controller and rig on phones; SIM/REAL badges in Devices.
- Fades: preset pushes and Wi-Fi driver bodies always carry fade and
  beat_time, so "off" no longer inherits an earlier fade.
- Also the sequences-v2 work in progress: desktop port, bridge firmware,
  serial bridge, Wi-Fi drivers, sequence timeline, audio and API changes.
- led-driver: ESP-NOW link, beat sync, control messages, sim hooks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-16 19:32:46 +13:00
jimmyandClaude Haiku 5.5 50ca46fee6 feat: sequences v2, driver frame sync and submodule updates
- Sequences v2, bridges and sim-controller changes from the working tree.
- Records the led-driver, led-tool and led-simulator commits above.
- Includes dmx-driver/ and graphify-out/.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 14:10:56 +13:00
jimmyandClaude Sonnet 5.5 2543673bd8 feat: sequences v2, bridges, and sim-controller
Rework sequences (engine, seqplay, envelope, API, web UI), add bridge
support, add the host sim-controller and rig simulation tests, and
update docs, presets and project tooling config.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-10 17:47:27 +13:00
jimmyandClaude Opus 5.5 04b56c6ef2 feat: device groups, combined brightness and beat-driven sequences from main
Groups (registry of driver MACs, optionally scoped to a profile) become
the drivers' group membership, alongside z<zone id> for zones that still
name drivers. Zones play to their group_ids. Group and device routes for
driver config, brightness (global x groups x device x zone) and identify.
The push path takes main's message shape: select as a list, groups as a
filter (one GROUP_CMD per group, or JSON when a preset has a background),
short keys so JSON fits a frame.

Sequences follow main: lanes of {preset_id, beats} steps played to each
lane's groups, advanced by the mic's beats or a clock at
audio_simulated_bpm; a switch waits for the next beat or downbeat; sync-
phase, stop (clears the zone's drivers) and status. This replaces the
time-based per-zone sequencer and scene playback, as in main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 18:09:42 +13:00
jimmyandClaude Opus 5.5 19fea0b0a1 feat: ping drivers and push groups from the devices modal
POST /devices/ping broadcasts an ESP-NOW PING_REQ, collects the drivers'
PING_RSP for timeout_s and registers or renames the ones that answer. A
reply also counts as the driver being heard, so group updates go to it
again. POST /devices/groups sends every ESP-NOW driver its groups and
reports the acks. The devices modal gets the Ping drivers and Update
groups buttons from main, with per-driver ping dots.

UI files are now served with Cache-Control: no-cache and the firmware
build hash as ETag, so a browser picks up a new UI right after an update
instead of a day later.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 17:53:56 +13:00
jimmyandClaude Opus 5.5 e7f238aebc fix: stop group updates to silent drivers from starving zone play
Every acked unicast holds a pending slot for its whole retry run, so zone
and profile edits with drivers switched off filled the link and the next
zone play timed out (503). Group updates now go to a driver that has
failed three messages in a row at most once every 30 s; one that comes
back still gets its groups when it announces or resyncs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 10:38:51 +13:00
jimmyandClaude Opus 5.5 57182188ba feat: port the remaining v1 API to the v2 controller
Profiles seed presets, a default zone and a palette, and clone with their
own copies; deleting a profile removes what it owned. Zones get the v1
list shape, set-current, current, clone and content-fragment. Devices are
keyed by MAC with v1 validation and identify. Patterns: definitions, OTA
file and manifest, upload, driver, and send over ESP-NOW (the led-driver
pattern sources are embedded in the firmware). Pixel outputs get v1
validation and a DDP/Art-Net/sACN test pattern. Sequences, palettes and
settings follow v1 replies and validation, and /ws forwards browser
messages to the drivers.

The resource handlers move out of api.c into res_*.c, patterns.c and
outputs.c. cJSON now allocates from PSRAM: the store had grown enough to
starve internal RAM and abort the mic at boot. /status reports
free_internal.

The Wi-Fi AP and led-tool routes are left out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:58:17 +13:00
jimmyandClaude Opus 5.5 1c222771a5 refactor: move the v2 controller to the repository root
The ESP-IDF project, docs, tools, tests and web UI move from v2/ to the
root, and the Makefile, README, build scripts and test runner drop the
v2/ prefix.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 23:44:58 +13:00