feat(api): tcp driver registry, identify, preset push delivery

- Track Wi-Fi TCP clients, liveness pings, disconnect broadcast, bind errors via gather\n- Device list/get include connected; POST identify with __identify preset\n- Presets push/send delivery helpers; bump led-driver hello type

Made-with: Cursor

docs/API.md

@@ -15,8 +15,8 @@ All JSON APIs use `Content-Type: application/json` for bodies and responses unle
 
 The main UI has two modes controlled by the mode toggle:
 
-- **Run mode**: optimized for operation (tab/preset selection, profile apply, and **Devices** registry for LED driver names/MACs).
+- **Run mode**: optimized for operation (tab/preset selection and profile apply).
-- **Edit mode**: shows editing/management controls (tabs, presets, patterns, colour palette, send presets, profile management actions, and related tools).
+- **Edit mode**: shows editing/management controls (tabs, presets, patterns, colour palette, send presets, profile management actions, **Devices** registry for LED driver names/MACs, and related tools).
 
 Profiles are available in both modes, but behavior differs:
 

esp32/main.py

@@ -1,14 +1,25 @@
-# Serial-to-ESP-NOW bridge: receives from Pi on UART, forwards to ESP-NOW peers.
+# Serial-to-ESP-NOW bridge: JSON in both directions on UART + ESP-NOW.
-# Wire format: first 6 bytes = destination MAC, rest = payload. Address is always 6 bytes.
+#
+# Pi → UART (two supported forms):
+#   A) Legacy: 6 bytes destination MAC + UTF-8 JSON payload (one write = one frame).
+#   B) Newline JSON: one object per line, UTF-8, ending with \n
+#      - Multicast via ESP32: {"m":"split","peers":["12hex",...],"body":{...}}
+#      - Unicast / broadcast: {"to":"12hex","v":"1",...}  (all keys except to/dest go to peers)
+#
+# ESP-NOW → Pi: newline-delimited JSON, one object per packet:
+#   {"dir":"espnow_rx","from":"<12hex>","payload":{...}}   if body was JSON
+#   {"dir":"espnow_rx","from":"<12hex>","payload_text":"..."} if UTF-8 not JSON
+#   {"dir":"espnow_rx","from":"<12hex>","payload_b64":"..."} if binary
 from machine import Pin, UART
 import espnow
+import json
 import network
 import time
+import ubinascii
 
 UART_BAUD = 912000
 BROADCAST = b"\xff\xff\xff\xff\xff\xff"
 MAX_PEERS = 20
-# Match led-driver / controller default settings wifi_channel (1–11)
 WIFI_CHANNEL = 6
 
 sta = network.WLAN(network.STA_IF)
@@ -22,22 +33,18 @@ esp.add_peer(BROADCAST)
 
 uart = UART(1, UART_BAUD, tx=Pin(21), rx=Pin(6))
 
-# Track last send time per peer for LRU eviction (remove oldest when at limit).
 last_used = {BROADCAST: time.ticks_ms()}
+uart_rx_buf = b""
 
-
-# ESP_ERR_ESPNOW_EXIST: peer already registered (ignore when adding).
 ESP_ERR_ESPNOW_EXIST = -12395
 
 
 def ensure_peer(addr):
-    """Ensure addr is in the peer list. When at 20 peers, remove the oldest-used (LRU)."""
     peers = esp.get_peers()
     peer_macs = [p[0] for p in peers]
     if addr in peer_macs:
         return
     if len(peer_macs) >= MAX_PEERS:
-        # Remove the peer we used least recently (oldest).
         oldest_mac = None
         oldest_ts = time.ticks_ms()
         for mac in peer_macs:
@@ -57,16 +64,190 @@ def ensure_peer(addr):
             raise
 
 
-print("Starting ESP32 main.py")
+def try_apply_bridge_config(obj):
+    """Pi sends {"m":"bridge","ch":1..11} — set STA channel only; do not ESP-NOW forward."""
+    if not isinstance(obj, dict) or obj.get("m") != "bridge":
+        return False
+    ch = obj.get("ch")
+    if ch is None:
+        ch = obj.get("wifi_channel")
+    if ch is None:
+        return True
+    try:
+        n = int(ch)
+        if 1 <= n <= 11:
+            sta.config(pm=network.WLAN.PM_NONE, channel=n)
+            print("Bridge STA channel ->", n)
+    except Exception as e:
+        print("bridge config:", e)
+    return True
 
-while True:
+
-    if uart.any():
+def send_split_from_obj(obj):
-        data = uart.read()
+    """obj has m=split, peers=[12hex,...], body=dict."""
-        if not data or len(data) < 6:
+    body = obj.get("body")
+    if body is None:
+        return
+    try:
+        out = json.dumps(body).encode("utf-8")
+    except (TypeError, ValueError):
+        return
+    for peer in obj.get("peers") or []:
+        if not isinstance(peer, str) or len(peer) != 12:
             continue
-        print(f"Received data: {data}")
+        try:
+            mac = bytes.fromhex(peer)
+        except ValueError:
+            continue
+        if len(mac) != 6:
+            continue
+        ensure_peer(mac)
+        esp.send(mac, out)
+        last_used[mac] = time.ticks_ms()
+
+
+def process_broadcast_payload_split_or_flood(payload):
+    try:
+        text = payload.decode("utf-8")
+        obj = json.loads(text)
+    except Exception:
+        obj = None
+    if isinstance(obj, dict) and try_apply_bridge_config(obj):
+        return
+    if (
+        isinstance(obj, dict)
+        and obj.get("m") == "split"
+        and isinstance(obj.get("peers"), list)
+    ):
+        send_split_from_obj(obj)
+        return
+    ensure_peer(BROADCAST)
+    esp.send(BROADCAST, payload)
+    last_used[BROADCAST] = time.ticks_ms()
+
+
+def process_legacy_uart_frame(data):
+    if not data or len(data) < 6:
+        return
     addr = data[:6]
     payload = data[6:]
+    if addr == BROADCAST:
+        process_broadcast_payload_split_or_flood(payload)
+        return
     ensure_peer(addr)
     esp.send(addr, payload)
     last_used[addr] = time.ticks_ms()
+
+
+def handle_json_command_line(obj):
+    if not isinstance(obj, dict):
+        return
+    if try_apply_bridge_config(obj):
+        return
+    if obj.get("m") == "split" and isinstance(obj.get("peers"), list):
+        send_split_from_obj(obj)
+        return
+    to = obj.get("to") or obj.get("dest")
+    if isinstance(to, str) and len(to) == 12:
+        try:
+            mac = bytes.fromhex(to)
+        except ValueError:
+            return
+        if len(mac) != 6:
+            return
+        body = {k: v for k, v in obj.items() if k not in ("to", "dest")}
+        if not body:
+            return
+        try:
+            out = json.dumps(body).encode("utf-8")
+        except (TypeError, ValueError):
+            return
+        ensure_peer(mac)
+        esp.send(mac, out)
+        last_used[mac] = time.ticks_ms()
+
+
+def drain_uart_json_lines():
+    """Parse leading newline-delimited JSON objects from uart_rx_buf; leave rest."""
+    global uart_rx_buf
+    while True:
+        s = uart_rx_buf.lstrip()
+        if not s:
+            uart_rx_buf = b""
+            return
+        if s[0] != ord("{"):
+            uart_rx_buf = s
+            return
+        nl = s.find(b"\n")
+        if nl < 0:
+            uart_rx_buf = s
+            return
+        line = s[:nl].strip()
+        uart_rx_buf = s[nl + 1 :]
+        if line:
+            try:
+                text = line.decode("utf-8")
+                obj = json.loads(text)
+                handle_json_command_line(obj)
+            except Exception as e:
+                print("UART JSON line error:", e)
+        # continue; there may be another JSON line in buffer
+
+
+def drain_uart_legacy_frame():
+    """If buffer does not start with '{', treat whole buffer as one 6-byte MAC + JSON frame."""
+    global uart_rx_buf
+    s = uart_rx_buf
+    if not s or s[0] == ord("{"):
+        return
+    if len(s) < 6:
+        return
+    data = s
+    uart_rx_buf = b""
+    process_legacy_uart_frame(data)
+
+
+def forward_espnow_to_uart(mac, msg):
+    peer_hex = ubinascii.hexlify(mac).decode()
+    try:
+        text = msg.decode("utf-8")
+        try:
+            payload = json.loads(text)
+            line_obj = {"dir": "espnow_rx", "from": peer_hex, "payload": payload}
+        except ValueError:
+            line_obj = {"dir": "espnow_rx", "from": peer_hex, "payload_text": text}
+    except UnicodeDecodeError:
+        line_obj = {
+            "dir": "espnow_rx",
+            "from": peer_hex,
+            "payload_b64": ubinascii.b64encode(msg).decode(),
+        }
+    try:
+        line = json.dumps(line_obj) + "\n"
+        uart.write(line.encode("utf-8"))
+    except Exception as e:
+        print("UART TX error:", e)
+
+
+print("Starting ESP32 bridge (UART JSON + legacy MAC+JSON, ESP-NOW RX → UART JSON lines)")
+
+while True:
+    idle = True
+    if uart.any():
+        idle = False
+        uart_rx_buf += uart.read()
+        drain_uart_json_lines()
+        drain_uart_legacy_frame()
+
+    try:
+        peer, msg = esp.recv(0)
+    except OSError:
+        peer, msg = None, None
+
+    if peer is not None and msg is not None:
+        idle = False
+        if len(peer) == 6:
+            forward_espnow_to_uart(peer, msg)
+
+    if idle:
+        time.sleep_ms(1)

src/controllers/device.py

@@ -5,29 +5,104 @@ from models.device import (
     validate_device_transport,
     validate_device_type,
 )
+from models.transport import get_current_sender
+from models.tcp_clients import (
+    normalize_tcp_peer_ip,
+    send_json_line_to_ip,
+    tcp_client_connected,
+)
+from util.espnow_message import build_message
+import asyncio
 import json
 
+# Ephemeral driver preset name (never written to Pi preset store; ``save`` not set on wire).
+_IDENTIFY_PRESET_KEY = "__identify"
+
+# Short-key payload: 10 Hz full cycle = 50 ms on + 50 ms off (driver ``blink`` toggles each ``d`` ms).
+_IDENTIFY_DRIVER_PRESET = {
+    "p": "blink",
+    "c": ["#ff0000"],
+    "d": 50,
+    "b": 128,
+    "a": True,
+    "n1": 0,
+    "n2": 0,
+    "n3": 0,
+    "n4": 0,
+    "n5": 0,
+    "n6": 0,
+}
+
+
+def _compact_v1_json(*, presets=None, select=None, save=False):
+    """Single-line v1 object; compact so serial/ESP-NOW stays small."""
+    body = {"v": "1"}
+    if presets is not None:
+        body["presets"] = presets
+        if save:
+            body["save"] = True
+    if select is not None:
+        body["select"] = select
+    return json.dumps(body, separators=(",", ":"))
+
+# Seconds after identify blink before selecting built-in ``off`` (tests may monkeypatch).
+IDENTIFY_OFF_DELAY_S = 2.0
+
 controller = Microdot()
 devices = Device()
 
 
+def _device_live_connected(dev_dict):
+    """
+    Wi-Fi: whether a TCP client is registered for this device's address (IP).
+    ESP-NOW: None (no TCP session on the Pi for that transport).
+    """
+    tr = (dev_dict.get("transport") or "espnow").strip().lower()
+    if tr != "wifi":
+        return None
+    ip = normalize_tcp_peer_ip(dev_dict.get("address") or "")
+    if not ip:
+        return False
+    return tcp_client_connected(ip)
+
+
+def _device_json_with_live_status(dev_dict):
+    row = dict(dev_dict)
+    row["connected"] = _device_live_connected(dev_dict)
+    return row
+
+
+async def _identify_send_off_after_delay(sender, transport, wifi_ip, dev_id, name):
+    try:
+        await asyncio.sleep(IDENTIFY_OFF_DELAY_S)
+        off_msg = build_message(select={name: ["off"]})
+        if transport == "wifi":
+            await send_json_line_to_ip(wifi_ip, off_msg)
+        else:
+            await sender.send(off_msg, addr=dev_id)
+    except Exception:
+        pass
+
+
 @controller.get("")
 async def list_devices(request):
-    """List all devices."""
+    """List all devices (includes ``connected`` for live Wi-Fi TCP presence)."""
     devices_data = {}
     for dev_id in devices.list():
         d = devices.read(dev_id)
         if d:
-            devices_data[dev_id] = d
+            devices_data[dev_id] = _device_json_with_live_status(d)
     return json.dumps(devices_data), 200, {"Content-Type": "application/json"}
 
 
 @controller.get("/<id>")
 async def get_device(request, id):
-    """Get a device by ID."""
+    """Get a device by ID (includes ``connected`` for live Wi-Fi TCP presence)."""
     dev = devices.read(id)
     if dev:
-        return json.dumps(dev), 200, {"Content-Type": "application/json"}
+        return json.dumps(_device_json_with_live_status(dev)), 200, {
+            "Content-Type": "application/json",
+        }
     return json.dumps({"error": "Device not found"}), 404, {
         "Content-Type": "application/json",
     }
@@ -91,6 +166,7 @@ async def update_device(request, id):
         data = dict(raw)
         data.pop("id", None)
         data.pop("addresses", None)
+        data.pop("connected", None)
         if "name" in data:
             n = (data.get("name") or "").strip()
             if not n:
@@ -127,3 +203,59 @@ async def delete_device(request, id):
     return json.dumps({"error": "Device not found"}), 404, {
         "Content-Type": "application/json",
     }
+
+
+@controller.post("/<id>/identify")
+async def identify_device(request, id):
+    """
+    One v1 JSON object: ``presets.__identify`` (``d``=50 ms → 10 Hz blink) plus ``select`` for
+    this device name — same combined shape as profile sends the driver already accepts over TCP
+    / ESP-NOW. No ``save``. After ``IDENTIFY_OFF_DELAY_S``, a background task selects ``off``.
+    """
+    dev = devices.read(id)
+    if not dev:
+        return json.dumps({"error": "Device not found"}), 404, {
+            "Content-Type": "application/json",
+        }
+    sender = get_current_sender()
+    if not sender:
+        return json.dumps({"error": "Transport not configured"}), 503, {
+            "Content-Type": "application/json",
+        }
+    name = str(dev.get("name") or "").strip()
+    if not name:
+        return json.dumps({"error": "Device must have a name to identify"}), 400, {
+            "Content-Type": "application/json",
+        }
+
+    transport = dev.get("transport") or "espnow"
+    wifi_ip = None
+    if transport == "wifi":
+        wifi_ip = dev.get("address")
+        if not wifi_ip:
+            return json.dumps({"error": "Device has no IP address"}), 400, {
+                "Content-Type": "application/json",
+            }
+
+    try:
+        msg = _compact_v1_json(
+            presets={_IDENTIFY_PRESET_KEY: dict(_IDENTIFY_DRIVER_PRESET)},
+            select={name: [_IDENTIFY_PRESET_KEY]},
+        )
+        if transport == "wifi":
+            ok = await send_json_line_to_ip(wifi_ip, msg)
+            if not ok:
+                return json.dumps({"error": "Wi-Fi driver not connected"}), 503, {
+                    "Content-Type": "application/json",
+                }
+        else:
+            await sender.send(msg, addr=id)
+
+        asyncio.create_task(
+            _identify_send_off_after_delay(sender, transport, wifi_ip, id, name)
+        )
+    except Exception as e:
+        return json.dumps({"error": str(e)}), 503, {"Content-Type": "application/json"}
+    return json.dumps({"message": "Identify sent"}), 200, {
+        "Content-Type": "application/json",
+    }

src/controllers/preset.py

@@ -2,9 +2,10 @@ from microdot import Microdot
 from microdot.session import with_session
 from models.preset import Preset
 from models.profile import Profile
+from models.device import Device, normalize_mac
 from models.transport import get_current_sender
+from util.driver_delivery import deliver_json_messages, deliver_preset_broadcast_then_per_device
 from util.espnow_message import build_message, build_preset_dict
-import asyncio
 import json
 
 controller = Microdot()
@@ -125,13 +126,17 @@ async def delete_preset(request, *args, **kwargs):
 @with_session
 async def send_presets(request, session):
     """
-    Send one or more presets to the LED driver (via serial transport).
+    Send one or more presets to LED drivers (serial/ESP-NOW and/or TCP Wi-Fi clients).
 
     Body JSON:
         {"preset_ids": ["1", "2", ...]}  or  {"ids": ["1", "2", ...]}
+        Optional "targets": ["aabbccddeeff", ...] — registry MACs. When set: preset
+        chunks are ESP-NOW broadcast once each; Wi-Fi drivers get the same chunks
+        over TCP; if "default" is set, each target then gets a unicast default
+        message (serial or TCP) with that device name in "targets".
+        Omit targets for broadcast-only serial (legacy).
 
-    The controller looks up each preset, converts to API format, chunks into
+    Optional "destination_mac" / "to": single MAC when targets is omitted.
-    <= 240-byte messages, and sends them over the configured transport.
     """
     try:
         data = request.json or {}
@@ -144,7 +149,6 @@ async def send_presets(request, session):
     save_flag = data.get('save', True)
     save_flag = bool(save_flag)
     default_id = data.get('default')
-    # Optional 12-char hex MAC to send to one device; omit for default (e.g. broadcast).
     destination_mac = data.get('destination_mac') or data.get('to')
 
     # Build API-compliant preset map keyed by preset ID, include name
@@ -171,23 +175,13 @@ async def send_presets(request, session):
     if not sender:
         return json.dumps({"error": "Transport not configured"}), 503, {'Content-Type': 'application/json'}
 
-    async def send_chunk(chunk_presets, is_last):
-        # Save/default should only be sent with the final presets chunk.
-        msg = build_message(
-            presets=chunk_presets,
-            save=save_flag and is_last,
-            default=default_id if is_last else None,
-        )
-        await sender.send(msg, addr=destination_mac)
-
     MAX_BYTES = 240
     send_delay_s = 0.1
     entries = list(presets_by_name.items())
     total_presets = len(entries)
-    messages_sent = 0
 
     batch = {}
-    last_msg = None
+    chunk_messages = []
     for name, preset_obj in entries:
         test_batch = dict(batch)
         test_batch[name] = preset_obj
@@ -196,28 +190,133 @@ async def send_presets(request, session):
 
         if size <= MAX_BYTES or not batch:
             batch = test_batch
-            last_msg = test_msg
         else:
-            try:
+            chunk_messages.append(
-                await send_chunk(batch, False)
+                build_message(
-            except Exception:
+                    presets=dict(batch),
-                return json.dumps({"error": "Send failed"}), 503, {'Content-Type': 'application/json'}
+                    save=False,
-            await asyncio.sleep(send_delay_s)
+                    default=None,
-            messages_sent += 1
+                )
+            )
             batch = {name: preset_obj}
-            last_msg = build_message(presets=batch, save=save_flag, default=default_id)
 
     if batch:
+        chunk_messages.append(
+            build_message(
+                presets=dict(batch),
+                save=save_flag,
+                default=default_id,
+            )
+        )
+
+    target_list = None
+    raw_targets = data.get("targets")
+    if isinstance(raw_targets, list) and raw_targets:
+        target_list = []
+        for t in raw_targets:
+            m = normalize_mac(str(t))
+            if m:
+                target_list.append(m)
+        target_list = list(dict.fromkeys(target_list))
+        if not target_list:
+            target_list = None
+    elif destination_mac:
+        dm = normalize_mac(str(destination_mac))
+        target_list = [dm] if dm else None
+
     try:
-            await send_chunk(batch, True)
+        if target_list:
+            deliveries = await deliver_preset_broadcast_then_per_device(
+                sender,
+                chunk_messages,
+                target_list,
+                Device(),
+                str(default_id) if default_id is not None else None,
+                delay_s=send_delay_s,
+            )
+        else:
+            deliveries, _chunks = await deliver_json_messages(
+                sender,
+                chunk_messages,
+                None,
+                Device(),
+                delay_s=send_delay_s,
+            )
     except Exception:
         return json.dumps({"error": "Send failed"}), 503, {'Content-Type': 'application/json'}
-        await asyncio.sleep(send_delay_s)
-        messages_sent += 1
 
     return json.dumps({
         "message": "Presets sent",
         "presets_sent": total_presets,
-        "messages_sent": messages_sent
+        "messages_sent": deliveries,
+    }), 200, {'Content-Type': 'application/json'}
+
+
+@controller.post('/push')
+@with_session
+async def push_driver_messages(request, session):
+    """
+    Deliver one or more raw v1 JSON objects to devices (ESP-NOW and/or TCP).
+
+    Body:
+        {"sequence": [{ "v": "1", ... }, ...], "targets": ["mac", ...]}
+    or a single {"payload": {...}, "targets": [...]}.
+    """
+    try:
+        data = request.json or {}
+    except Exception:
+        return json.dumps({"error": "Invalid JSON"}), 400, {'Content-Type': 'application/json'}
+
+    seq = data.get("sequence")
+    if not seq and data.get("payload") is not None:
+        seq = [data["payload"]]
+    if not isinstance(seq, list) or not seq:
+        return json.dumps({"error": "sequence or payload required"}), 400, {'Content-Type': 'application/json'}
+
+    raw_targets = data.get("targets")
+    target_list = None
+    if isinstance(raw_targets, list) and raw_targets:
+        target_list = []
+        for t in raw_targets:
+            m = normalize_mac(str(t))
+            if m:
+                target_list.append(m)
+        target_list = list(dict.fromkeys(target_list))
+        if not target_list:
+            target_list = None
+
+    sender = get_current_sender()
+    if not sender:
+        return json.dumps({"error": "Transport not configured"}), 503, {'Content-Type': 'application/json'}
+
+    messages = []
+    for item in seq:
+        if isinstance(item, dict):
+            messages.append(json.dumps(item))
+        elif isinstance(item, str):
+            messages.append(item)
+        else:
+            return json.dumps({"error": "sequence items must be objects or strings"}), 400, {'Content-Type': 'application/json'}
+
+    delay_s = data.get("delay_s", 0.05)
+    try:
+        delay_s = float(delay_s)
+    except (TypeError, ValueError):
+        delay_s = 0.05
+
+    try:
+        deliveries, _chunks = await deliver_json_messages(
+            sender,
+            messages,
+            target_list,
+            Device(),
+            delay_s=delay_s,
+        )
+    except Exception:
+        return json.dumps({"error": "Send failed"}), 503, {'Content-Type': 'application/json'}
+
+    return json.dumps({
+        "message": "Delivered",
+        "deliveries": deliveries,
     }), 200, {'Content-Type': 'application/json'}
 

src/main.py

@@ -1,6 +1,8 @@
 import asyncio
+import errno
 import json
 import os
+import socket
 import threading
 import traceback
 from microdot import Microdot, send_file
@@ -20,15 +22,101 @@ import controllers.settings as settings_controller
 import controllers.device as device_controller
 from models.transport import get_sender, set_sender, get_current_sender
 from models.device import Device, normalize_mac
+from models import tcp_clients as tcp_client_registry
+from util.device_status_broadcaster import (
+    broadcast_device_tcp_snapshot_to,
+    broadcast_device_tcp_status,
+    register_device_status_ws,
+    unregister_device_status_ws,
+)
 
 _tcp_device_lock = threading.Lock()
 
+# Wi-Fi drivers send one hello line then stay quiet; periodic outbound data makes dead peers
+# fail drain() within this interval (keepalive alone is often slow or ineffective).
+TCP_LIVENESS_PING_INTERVAL_S = 12.0
 
-def _register_tcp_device_sync(device_name: str, peer_ip: str, mac) -> None:
+# Keepalive or lossy Wi-Fi can still surface OSError(110) / TimeoutError on recv or wait_closed.
+_TCP_PEER_GONE = (
+    BrokenPipeError,
+    ConnectionResetError,
+    ConnectionAbortedError,
+    ConnectionRefusedError,
+    TimeoutError,
+    OSError,
+)
+
+
+def _tcp_socket_from_writer(writer):
+    sock = writer.get_extra_info("socket")
+    if sock is not None:
+        return sock
+    transport = getattr(writer, "transport", None)
+    if transport is not None:
+        return transport.get_extra_info("socket")
+    return None
+
+
+def _enable_tcp_keepalive(writer) -> None:
+    """
+    Detect vanished peers (power off, Wi-Fi drop) without waiting for a send() failure.
+    Linux: shorten time before the first keepalive probe; other platforms: SO_KEEPALIVE only.
+    """
+    sock = _tcp_socket_from_writer(writer)
+    if sock is None:
+        return
+    try:
+        sock.setsockopt(socket.SOL_SOCKET, socket.SO_KEEPALIVE, 1)
+    except OSError:
+        return
+    if hasattr(socket, "TCP_KEEPIDLE"):
+        try:
+            sock.setsockopt(socket.IPPROTO_TCP, socket.TCP_KEEPIDLE, 120)
+        except OSError:
+            pass
+    if hasattr(socket, "TCP_KEEPINTVL"):
+        try:
+            sock.setsockopt(socket.IPPROTO_TCP, socket.TCP_KEEPINTVL, 15)
+        except OSError:
+            pass
+    if hasattr(socket, "TCP_KEEPCNT"):
+        try:
+            sock.setsockopt(socket.IPPROTO_TCP, socket.TCP_KEEPCNT, 4)
+        except OSError:
+            pass
+    # Do not set TCP_USER_TIMEOUT: a short value causes Errno 110 on recv for Wi-Fi peers
+    # when ACKs are delayed (ESP power save, lossy links). Liveness pings already clear dead
+    # sessions via drain().
+
+
+async def _tcp_liveness_ping_loop(writer, peer_ip: str) -> None:
+    """Send a bare newline so ``drain()`` fails soon after the peer disappears."""
+    while True:
+        await asyncio.sleep(TCP_LIVENESS_PING_INTERVAL_S)
+        if writer.is_closing():
+            return
+        try:
+            writer.write(b"\n")
+            await writer.drain()
+        except Exception as exc:
+            print(f"[TCP] liveness ping failed {peer_ip!r}: {exc!r}")
+            tcp_client_registry.unregister_tcp_writer(peer_ip, writer)
+            try:
+                writer.close()
+            except Exception:
+                pass
+            return
+
+
+def _register_tcp_device_sync(
+    device_name: str, peer_ip: str, mac, device_type=None
+) -> None:
     with _tcp_device_lock:
         try:
             d = Device()
-            did = d.upsert_wifi_tcp_client(device_name, peer_ip, mac)
+            did = d.upsert_wifi_tcp_client(
+                device_name, peer_ip, mac, device_type=device_type
+            )
             if did:
                 print(
                     f"TCP device registered: mac={did} name={device_name!r} ip={peer_ip!r}"
@@ -44,11 +132,21 @@ async def _handle_tcp_client(reader, writer):
     peer_ip = peer[0] if peer else ""
     peer_label = f"{peer_ip}:{peer[1]}" if peer and len(peer) > 1 else peer_ip or "?"
     print(f"[TCP] client connected {peer_label}")
+    _enable_tcp_keepalive(writer)
+    tcp_client_registry.register_tcp_writer(peer_ip, writer)
+    ping_task = asyncio.create_task(_tcp_liveness_ping_loop(writer, peer_ip))
     sender = get_current_sender()
     buf = b""
     try:
         while True:
+            try:
                 chunk = await reader.read(4096)
+            except asyncio.CancelledError:
+                raise
+            except _TCP_PEER_GONE as e:
+                print(f"[TCP] read ended ({peer_label}): {e!r}")
+                tcp_client_registry.unregister_tcp_writer(peer_ip, writer)
+                break
             if not chunk:
                 break
             buf += chunk
@@ -77,8 +175,11 @@ async def _handle_tcp_client(reader, writer):
                 if isinstance(parsed, dict):
                     dns = str(parsed.get("device_name") or "").strip()
                     mac = parsed.get("mac") or parsed.get("device_mac") or parsed.get("sta_mac")
+                    device_type = parsed.get("type") or parsed.get("device_type")
                     if dns and normalize_mac(mac):
-                        _register_tcp_device_sync(dns, peer_ip, mac)
+                        _register_tcp_device_sync(
+                            dns, peer_ip, mac, device_type=device_type
+                        )
                     addr = parsed.pop("to", None)
                     payload = json.dumps(parsed) if parsed else "{}"
                     if sender:
@@ -92,12 +193,40 @@ async def _handle_tcp_client(reader, writer):
                     except Exception:
                         pass
     finally:
-        print(f"[TCP] client disconnected {peer_label}")
+        # Drop registry + broadcast connected:false before awaiting ping/close so the UI
+        # does not stay green if ping or wait_closed blocks on a timed-out peer.
+        outcome = tcp_client_registry.unregister_tcp_writer(peer_ip, writer)
+        if outcome == "superseded":
+            print(
+                f"[TCP] TCP session ended (same IP already has a newer connection): {peer_label}"
+            )
+        ping_task.cancel()
+        try:
+            await ping_task
+        except asyncio.CancelledError:
+            pass
         try:
             writer.close()
             await writer.wait_closed()
-        except Exception:
+        except asyncio.CancelledError:
-            pass
+            raise
+        except _TCP_PEER_GONE:
+            tcp_client_registry.unregister_tcp_writer(peer_ip, writer)
+
+
+async def _send_bridge_wifi_channel(settings, sender):
+    """Tell the serial ESP32 bridge to set STA channel (settings wifi_channel); not forwarded as ESP-NOW."""
+    try:
+        ch = int(settings.get("wifi_channel", 6))
+    except (TypeError, ValueError):
+        ch = 6
+    ch = max(1, min(11, ch))
+    payload = json.dumps({"m": "bridge", "ch": ch}, separators=(",", ":"))
+    try:
+        await sender.send(payload, addr="ffffffffffff")
+        print(f"[startup] bridge Wi-Fi channel -> {ch}")
+    except Exception as e:
+        print(f"[startup] bridge channel message failed: {e}")
 
 
 async def _run_tcp_server(settings):
@@ -150,6 +279,8 @@ async def main(port=80):
     app.mount(settings_controller.controller, '/settings')
     app.mount(device_controller.controller, '/devices')
 
+    tcp_client_registry.set_tcp_status_broadcaster(broadcast_device_tcp_status)
+
     # Serve index.html at root (cwd is src/ when run via pipenv run run)
     @app.route('/')
     def index(request):
@@ -179,6 +310,9 @@ async def main(port=80):
     @app.route('/ws')
     @with_websocket
     async def ws(request, ws):
+        await register_device_status_ws(ws)
+        await broadcast_device_tcp_snapshot_to(ws)
+        try:
             while True:
                 data = await ws.receive()
                 print(data)
@@ -206,17 +340,33 @@ async def main(port=80):
                             pass
                 else:
                     break
+        finally:
+            await unregister_device_status_ws(ws)
 
 
 
-    server = asyncio.create_task(app.start_server(host="0.0.0.0", port=port))
     # Touch Device singleton early so db/device.json exists before first TCP hello.
     Device()
-    tcp_task = asyncio.create_task(_run_tcp_server(settings))
+    await _send_bridge_wifi_channel(settings, sender)
 
-    while True:
+    # Await HTTP + driver TCP together so bind failures (e.g. port 80 in use) surface
-        await asyncio.sleep(30)
+    # here instead of as an unretrieved Task exception; the UI WebSocket drops if HTTP
-    # cleanup before ending the application
+    # never starts, which clears Wi-Fi presence dots.
+    try:
+        await asyncio.gather(
+            app.start_server(host="0.0.0.0", port=port),
+            _run_tcp_server(settings),
+        )
+    except OSError as e:
+        if e.errno == errno.EADDRINUSE:
+            tcp_p = int(settings.get("tcp_port", 8765))
+            print(
+                f"[server] bind failed (address already in use): {e!s}\n"
+                f"[server] HTTP is configured for port {port} (env PORT); "
+                f"Wi-Fi LED drivers use tcp_port {tcp_p}. "
+                f"Stop the other process or use a free port, e.g. PORT=8080 pipenv run run"
+            )
+        raise
 
 if __name__ == "__main__":
     import os

src/models/device.py

@@ -233,10 +233,10 @@ class Device(Model):
     def list(self):
         return list(self.keys())
 
-    def upsert_wifi_tcp_client(self, device_name, peer_ip, mac):
+    def upsert_wifi_tcp_client(self, device_name, peer_ip, mac, device_type=None):
         """
-        Register or update a Wi-Fi client by **MAC** (storage id). Updates **name**
+        Register or update a Wi-Fi client by **MAC** (storage id). Updates **name**,
-        and **address** (peer IP) on each connect.
+        **address** (peer IP), and optionally **type** from the client hello when valid.
         """
         mac_hex = normalize_mac(mac)
         if not mac_hex:
@@ -247,9 +247,18 @@ class Device(Model):
         ip = normalize_address_for_transport(peer_ip, "wifi")
         if not ip:
             return None
+        resolved_type = None
+        if device_type is not None:
+            try:
+                resolved_type = validate_device_type(device_type)
+            except ValueError:
+                resolved_type = None
         if mac_hex in self:
             merged = dict(self[mac_hex])
             merged["name"] = name
+            if resolved_type is not None:
+                merged["type"] = resolved_type
+            else:
                 merged["type"] = validate_device_type(merged.get("type"))
             merged["transport"] = "wifi"
             merged["address"] = ip
@@ -260,7 +269,7 @@ class Device(Model):
         self[mac_hex] = {
             "id": mac_hex,
             "name": name,
-            "type": "led",
+            "type": resolved_type or "led",
             "transport": "wifi",
             "address": ip,
             "default_pattern": None,

src/models/tcp_clients.py

@@ -0,0 +1,115 @@
+"""Track connected Wi-Fi LED drivers (TCP clients) for outbound JSON lines."""
+
+import asyncio
+
+_writers = {}
+
+
+def prune_stale_tcp_writers() -> None:
+    """Remove writers that are already closing so the UI does not stay online."""
+    stale = [(ip, w) for ip, w in list(_writers.items()) if w.is_closing()]
+    for ip, w in stale:
+        unregister_tcp_writer(ip, w)
+
+
+def normalize_tcp_peer_ip(ip: str) -> str:
+    """Match asyncio peer addresses to registry IPs (strip IPv4-mapped IPv6 prefix)."""
+    s = str(ip).strip()
+    if s.lower().startswith("::ffff:"):
+        s = s[7:]
+    return s
+# Optional ``async def (ip: str, connected: bool) -> None`` set from ``main``.
+_tcp_status_broadcast = None
+
+
+def set_tcp_status_broadcaster(coro) -> None:
+    global _tcp_status_broadcast
+    _tcp_status_broadcast = coro
+
+
+def _schedule_tcp_status_broadcast(ip: str, connected: bool) -> None:
+    fn = _tcp_status_broadcast
+    if not fn:
+        return
+    try:
+        loop = asyncio.get_running_loop()
+    except RuntimeError:
+        return
+    try:
+        loop.create_task(fn(ip, connected))
+    except Exception:
+        pass
+
+
+def register_tcp_writer(peer_ip: str, writer) -> None:
+    if not peer_ip:
+        return
+    key = normalize_tcp_peer_ip(peer_ip)
+    if not key:
+        return
+    old = _writers.get(key)
+    _writers[key] = writer
+    _schedule_tcp_status_broadcast(key, True)
+    if old is not None and old is not writer:
+        try:
+            old.close()
+        except Exception:
+            pass
+
+
+def unregister_tcp_writer(peer_ip: str, writer=None) -> str:
+    """
+    Remove the writer for peer_ip. If ``writer`` is given, only pop when it is still
+    the registered instance (avoids a replaced TCP session removing the new one).
+
+    Returns ``removed`` (cleared live session + UI offline), ``noop`` (already gone),
+    or ``superseded`` (this writer is not the registered one for that IP).
+    """
+    if not peer_ip:
+        return "noop"
+    key = normalize_tcp_peer_ip(peer_ip)
+    if not key:
+        return "noop"
+    current = _writers.get(key)
+    if writer is not None:
+        if current is None:
+            return "noop"
+        if current is not writer:
+            return "superseded"
+    had = key in _writers
+    if had:
+        _writers.pop(key, None)
+        _schedule_tcp_status_broadcast(key, False)
+        print(f"[TCP] device disconnected: {key}")
+        return "removed"
+    return "noop"
+
+
+def list_connected_ips():
+    """IPs with an active TCP writer (for UI snapshot)."""
+    prune_stale_tcp_writers()
+    return list(_writers.keys())
+
+
+def tcp_client_connected(ip: str) -> bool:
+    """True if a Wi-Fi driver is connected on this IP (TCP writer registered)."""
+    prune_stale_tcp_writers()
+    key = normalize_tcp_peer_ip(ip)
+    return bool(key and key in _writers)
+
+
+async def send_json_line_to_ip(ip: str, json_str: str) -> bool:
+    """Send one newline-terminated JSON message to a connected TCP client."""
+    ip = normalize_tcp_peer_ip(ip)
+    writer = _writers.get(ip)
+    if not writer:
+        return False
+    try:
+        line = json_str if json_str.endswith("\n") else json_str + "\n"
+        writer.write(line.encode("utf-8"))
+        await writer.drain()
+        return True
+    except Exception as exc:
+        print(f"[TCP] send to {ip} failed: {exc}")
+        unregister_tcp_writer(ip, writer)
+        return False

src/models/transport.py

@@ -39,10 +39,12 @@ class SerialSender:
 
         self._serial = serial.Serial(port, baudrate=baudrate, timeout=1)
         self._default_addr = _parse_mac(default_addr)
+        self._write_lock = asyncio.Lock()
 
     async def send(self, data, addr=None):
         mac = _parse_mac(addr) if addr is not None else self._default_addr
         payload = _encode_payload(data)
+        async with self._write_lock:
             await _to_thread(self._serial.write, mac + payload)
         return True
 

src/util/device_status_broadcaster.py

@@ -0,0 +1,52 @@
+"""Push Wi-Fi TCP connect/disconnect updates to browser WebSocket clients."""
+
+import json
+import threading
+from typing import Any, Set
+
+# Threading lock: safe across asyncio tasks and avoids binding asyncio.Lock to the wrong loop.
+_clients_lock = threading.Lock()
+_clients: Set[Any] = set()
+
+
+async def register_device_status_ws(ws: Any) -> None:
+    with _clients_lock:
+        _clients.add(ws)
+
+
+async def unregister_device_status_ws(ws: Any) -> None:
+    with _clients_lock:
+        _clients.discard(ws)
+
+
+async def broadcast_device_tcp_status(ip: str, connected: bool) -> None:
+    from models.tcp_clients import normalize_tcp_peer_ip
+
+    ip = normalize_tcp_peer_ip(ip)
+    if not ip:
+        return
+    msg = json.dumps({"type": "device_tcp", "ip": ip, "connected": bool(connected)})
+    with _clients_lock:
+        targets = list(_clients)
+    dead = []
+    for ws in targets:
+        try:
+            await ws.send(msg)
+        except Exception as exc:
+            dead.append(ws)
+            print(f"[device_status_broadcaster] ws.send failed: {exc!r}")
+    if dead:
+        with _clients_lock:
+            for ws in dead:
+                _clients.discard(ws)
+
+
+async def broadcast_device_tcp_snapshot_to(ws: Any) -> None:
+    from models import tcp_clients as tcp
+
+    ips = tcp.list_connected_ips()
+    msg = json.dumps({"type": "device_tcp_snapshot", "connected_ips": ips})
+    try:
+        await ws.send(msg)
+    except Exception as exc:
+        print(f"[device_status_broadcaster] snapshot send failed: {exc!r}")

src/util/driver_delivery.py

@@ -0,0 +1,168 @@
+"""Deliver driver JSON messages over serial (ESP-NOW) and/or TCP (Wi-Fi clients)."""
+
+import asyncio
+import json
+
+from models.device import normalize_mac
+from models.tcp_clients import send_json_line_to_ip
+
+# Serial bridge (ESP32): broadcast MAC + this envelope → firmware unicasts ``body`` to each peer.
+_SPLIT_MODE = "split"
+_BROADCAST_MAC_HEX = "ffffffffffff"
+
+
+def _split_serial_envelope(inner_json_str, peer_hex_list):
+    """One UART frame: broadcast dest + JSON {m:split, peers:[hex,...], body:<object>}."""
+    body = json.loads(inner_json_str)
+    env = {"m": _SPLIT_MODE, "peers": list(peer_hex_list), "body": body}
+    return json.dumps(env, separators=(",", ":"))
+
+
+async def deliver_preset_broadcast_then_per_device(
+    sender,
+    chunk_messages,
+    target_macs,
+    devices_model,
+    default_id,
+    delay_s=0.1,
+):
+    """
+    Send preset definition chunks: ESP-NOW broadcast once per chunk; same chunk to each
+    Wi-Fi driver over TCP. If default_id is set, send a per-target default message
+    (unicast serial or TCP) with targets=[device name] for each registry entry.
+    """
+    if not chunk_messages:
+        return 0
+
+    seen = set()
+    ordered = []
+    for raw in target_macs:
+        m = normalize_mac(str(raw)) if raw else None
+        if not m or m in seen:
+            continue
+        seen.add(m)
+        ordered.append(m)
+
+    wifi_ips = []
+    for mac in ordered:
+        doc = devices_model.read(mac)
+        if doc and doc.get("transport") == "wifi" and doc.get("address"):
+            wifi_ips.append(str(doc["address"]).strip())
+
+    deliveries = 0
+    for msg in chunk_messages:
+        tasks = [sender.send(msg, addr=_BROADCAST_MAC_HEX)]
+        for ip in wifi_ips:
+            if ip:
+                tasks.append(send_json_line_to_ip(ip, msg))
+        results = await asyncio.gather(*tasks, return_exceptions=True)
+        if results and results[0] is True:
+            deliveries += 1
+        for r in results[1:]:
+            if r is True:
+                deliveries += 1
+        await asyncio.sleep(delay_s)
+
+    if default_id:
+        did = str(default_id)
+        for mac in ordered:
+            doc = devices_model.read(mac) or {}
+            name = str(doc.get("name") or "").strip() or mac
+            body = {"v": "1", "default": did, "save": True, "targets": [name]}
+            out = json.dumps(body, separators=(",", ":"))
+            if doc.get("transport") == "wifi" and doc.get("address"):
+                ip = str(doc["address"]).strip()
+                try:
+                    if await send_json_line_to_ip(ip, out):
+                        deliveries += 1
+                except Exception as e:
+                    print(f"[driver_delivery] default TCP failed: {e!r}")
+            else:
+                try:
+                    await sender.send(out, addr=mac)
+                    deliveries += 1
+                except Exception as e:
+                    print(f"[driver_delivery] default serial failed: {e!r}")
+            await asyncio.sleep(delay_s)
+
+    return deliveries
+
+
+async def deliver_json_messages(sender, messages, target_macs, devices_model, delay_s=0.1):
+    """
+    Send each message string to the bridge and/or TCP clients.
+
+    If target_macs is None or empty: one serial send per message (default/broadcast address).
+    Otherwise: Wi-Fi uses TCP in parallel. Multiple ESP-NOW peers are sent in **one** serial
+    write to the ESP32 (broadcast + split envelope); the bridge unicasts ``body`` to each
+    peer. A single ESP-NOW peer still uses one unicast serial frame. Wi-Fi and serial
+    tasks run together in one asyncio.gather.
+
+    Returns (delivery_count, chunk_count) where chunk_count is len(messages).
+    """
+    if not messages:
+        return 0, 0
+
+    if not target_macs:
+        deliveries = 0
+        for msg in messages:
+            await sender.send(msg)
+            deliveries += 1
+            await asyncio.sleep(delay_s)
+        return deliveries, len(messages)
+
+    seen = set()
+    ordered_macs = []
+    for raw in target_macs:
+        m = normalize_mac(str(raw)) if raw else None
+        if not m or m in seen:
+            continue
+        seen.add(m)
+        ordered_macs.append(m)
+
+    deliveries = 0
+    for msg in messages:
+        wifi_tasks = []
+        espnow_hex = []
+        for mac in ordered_macs:
+            doc = devices_model.read(mac)
+            if doc and doc.get("transport") == "wifi":
+                ip = doc.get("address")
+                if ip:
+                    wifi_tasks.append(send_json_line_to_ip(ip, msg))
+            else:
+                espnow_hex.append(mac)
+
+        tasks = []
+        espnow_peer_count = 0
+        if len(espnow_hex) > 1:
+            tasks.append(
+                sender.send(
+                    _split_serial_envelope(msg, espnow_hex),
+                    addr=_BROADCAST_MAC_HEX,
+                )
+            )
+            espnow_peer_count = len(espnow_hex)
+        elif len(espnow_hex) == 1:
+            tasks.append(sender.send(msg, addr=espnow_hex[0]))
+            espnow_peer_count = 1
+
+        tasks.extend(wifi_tasks)
+
+        if tasks:
+            results = await asyncio.gather(*tasks, return_exceptions=True)
+            n_serial = len(tasks) - len(wifi_tasks)
+            for i, r in enumerate(results):
+                if i < n_serial:
+                    if r is True:
+                        deliveries += espnow_peer_count
+                    elif isinstance(r, Exception):
+                        print(f"[driver_delivery] serial delivery failed: {r!r}")
+                else:
+                    if r is True:
+                        deliveries += 1
+                    elif isinstance(r, Exception):
+                        print(f"[driver_delivery] Wi-Fi delivery failed: {r!r}")
+
+        await asyncio.sleep(delay_s)
+    return deliveries, len(messages)

tests/models/test_device.py

@@ -102,6 +102,7 @@ def test_upsert_wifi_tcp_client():
     assert i1 == m1
     d = devices.read(i1)
     assert d["name"] == "kitchen"
+    assert d["type"] == "led"
     assert d["transport"] == "wifi"
     assert d["address"] == "192.168.1.20"
 
@@ -115,6 +116,14 @@ def test_upsert_wifi_tcp_client():
     assert again == m1
     assert devices.read(m1)["address"] == "192.168.1.99"
 
+    assert (
+        devices.upsert_wifi_tcp_client(
+            "kitchen", "192.168.1.100", m1, device_type="bogus"
+        )
+        == m1
+    )
+    assert devices.read(m1)["type"] == "led"
+
     i3 = devices.upsert_wifi_tcp_client("hall", "10.0.0.5", "deadbeefcafe")
     assert i3 == "deadbeefcafe"
     assert len(devices.list()) == 3

tests/tcp_test_server.py

@@ -6,8 +6,8 @@ Listens on the same TCP port used by led-driver WiFi transport and
 every 5 seconds sends a newline-delimited JSON message with v="1".
 
 Clients talking to the real Pi registry should send a first line JSON object
-that includes device_name and mac (12 hex) so the controller can register
+that includes device_name, mac (12 hex), and type (e.g. led) so the controller
-the device by MAC.
+can register the device by MAC.
 """
 
 import asyncio

tests/test_browser.py

@@ -349,9 +349,7 @@ def test_tabs_ui(browser: BrowserTest) -> bool:
             # Fill in tab name
             if browser.fill_input(By.ID, 'new-tab-name', 'Browser Test Tab'):
                 print("  ✓ Filled tab name")
-            # Fill in device IDs
+            # Devices default from registry or placeholder name "1"
-            if browser.fill_input(By.ID, 'new-tab-ids', '1,2,3'):
-                print("  ✓ Filled device IDs")
             # Click create button
             if browser.click_element(By.ID, 'create-tab-btn'):
                 print("  ✓ Clicked create button")
@@ -790,7 +788,6 @@ def test_preset_drag_and_drop(browser: BrowserTest) -> bool:
         if tabs_list and 'No tabs found' in tabs_list.text:
             # Create a tab
             browser.fill_input(By.ID, 'new-tab-name', 'Drag Test Tab')
-            browser.fill_input(By.ID, 'new-tab-ids', '1')
             browser.click_element(By.ID, 'create-tab-btn')
             time.sleep(1)
         
@@ -848,7 +845,7 @@ def test_preset_drag_and_drop(browser: BrowserTest) -> bool:
         print("✓ Created 3 presets for drag test")
         passed += 1
         
-        # Test 4: Add presets to the tab (via Edit Tab modal – Select buttons in list)
+        # Test 4: Add presets to the tab (via Edit Tab modal – Add buttons in list)
         total += 1
         try:
             tab_id = browser.driver.execute_script(
@@ -864,12 +861,12 @@ def test_preset_drag_and_drop(browser: BrowserTest) -> bool:
                 time.sleep(1)
                 list_el = browser.wait_for_element(By.ID, 'edit-tab-presets-list', timeout=5)
                 if list_el:
-                    select_buttons = browser.driver.find_elements(By.XPATH, "//div[@id='edit-tab-presets-list']//button[text()='Select']")
+                    select_buttons = browser.driver.find_elements(By.XPATH, "//div[@id='edit-tab-presets-list']//button[text()='Add']")
                     if len(select_buttons) >= 2:
                         browser.driver.execute_script("arguments[0].click();", select_buttons[0])
                         time.sleep(1.5)
                         browser.handle_alert(accept=True, timeout=1)
-                        select_buttons = browser.driver.find_elements(By.XPATH, "//div[@id='edit-tab-presets-list']//button[text()='Select']")
+                        select_buttons = browser.driver.find_elements(By.XPATH, "//div[@id='edit-tab-presets-list']//button[text()='Add']")
                         if len(select_buttons) >= 1:
                             browser.driver.execute_script("arguments[0].click();", select_buttons[0])
                             time.sleep(1.5)
@@ -949,7 +946,7 @@ def test_preset_drag_and_drop(browser: BrowserTest) -> bool:
                             tab_id
                         )
                         time.sleep(1)
-                    select_buttons = browser.driver.find_elements(By.XPATH, "//div[@id='edit-tab-presets-list']//button[text()='Select']")
+                    select_buttons = browser.driver.find_elements(By.XPATH, "//div[@id='edit-tab-presets-list']//button[text()='Add']")
                     if select_buttons:
                         print("  Attempting to add another preset...")
                         browser.driver.execute_script("arguments[0].click();", select_buttons[0])
@@ -973,7 +970,7 @@ def test_preset_drag_and_drop(browser: BrowserTest) -> bool:
                         else:
                             print(f"  ✗ Still only {len(draggable_presets)} preset(s) after adding")
                     else:
-                        print("  ✗ No Select buttons found in Edit Tab modal")
+                        print("  ✗ No Add buttons found in Edit Tab modal")
                 else:
                     print(f"✗ No presets found in tab (found {len(draggable_presets)})")
             else:

tests/test_endpoints_pytest.py

@@ -348,11 +348,15 @@ def test_settings_controller(server):
     assert resp.status_code == 400
 
 
-def test_profiles_presets_tabs_endpoints(server):
+def test_profiles_presets_tabs_endpoints(server, monkeypatch):
     c: requests.Session = server["client"]
     base_url: str = server["base_url"]
     sender: DummySender = server["sender"]
 
+    import controllers.device as device_ctl
+
+    monkeypatch.setattr(device_ctl, "IDENTIFY_OFF_DELAY_S", 0.05)
+
     unique_profile_name = f"pytest-profile-{uuid.uuid4().hex[:8]}"
 
     resp = c.post(f"{base_url}/profiles", json={"name": unique_profile_name})
@@ -593,6 +597,28 @@ def test_groups_sequences_scenes_palettes_patterns_endpoints(server):
     assert resp.status_code == 200
     assert resp.json()["name"] == "pytest-dev"
     assert resp.json()["type"] == "led"
+    assert resp.json().get("connected") is None
+
+    resp = c.get(f"{base_url}/devices")
+    assert resp.status_code == 200
+    assert resp.json()[dev_id].get("connected") is None
+
+    sender.sent.clear()
+    resp = c.post(f"{base_url}/devices/{dev_id}/identify")
+    assert resp.status_code == 200
+    assert resp.json().get("message")
+    assert len(sender.sent) >= 1
+    first = json.loads(sender.sent[0][0])
+    assert "presets" in first and "select" in first
+    assert first["presets"]["__identify"]["p"] == "blink"
+    assert first["presets"]["__identify"]["d"] == 50
+    assert first["select"]["pytest-dev"] == ["__identify"]
+    deadline = time.monotonic() + 2.0
+    while len(sender.sent) < 2 and time.monotonic() < deadline:
+        time.sleep(0.02)
+    assert len(sender.sent) >= 2
+    second = json.loads(sender.sent[1][0])
+    assert second.get("select") == {"pytest-dev": ["off"]}
 
     resp = c.post(
         f"{base_url}/devices",
@@ -610,6 +636,10 @@ def test_groups_sequences_scenes_palettes_patterns_endpoints(server):
     assert resp.json()[wid]["transport"] == "wifi"
     assert resp.json()[wid]["address"] == "192.168.50.10"
 
+    resp = c.get(f"{base_url}/devices/{wid}")
+    assert resp.status_code == 200
+    assert resp.json().get("connected") is False
+
     resp = c.post(
         f"{base_url}/devices",
         json={