feat(ui): Edit mode Menu on desktop, device groups and Identify
Sequences, Settings and Audio only show in Edit mode. On wide screens the Edit mode actions and Run mode move into the Menu. Edit device gets a Groups checklist. The Devices list and Edit device group show names without addresses, and every device in Edit device group, in the group or in the list to add from, gets an Identify button. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
24d3c1149d
commit
a560a1a72b
8 files changed
+181
-91
No files matched your search
+9
-9
@@ -10,16 +10,16 @@ Figures below are **schematic** (layout and ideas), not pixel-perfect screenshot
|
||||
|
||||
## Run mode and Edit mode
|
||||
|
||||
The header has a mode toggle (desktop and mobile menu). The **label on the button is the mode you switch to**.
|
||||
**Edit mode** is in the header and **Run mode** is in the **Menu** (on narrow screens, both are in the Menu). The **label on the button is the mode you switch to**.
|
||||
|
||||

|
||||

|
||||
|
||||
| Mode | Purpose |
|
||||
|------|--------|
|
||||
| **Run mode** | Day-to-day control: choose a zone, tap presets, apply profiles. Management buttons are hidden. |
|
||||
| **Edit mode** | Full setup: devices, groups, zones, presets, sequences, outputs, patterns, colour palette and settings, plus per-tile **Edit** on the strip. |
|
||||
| **Run mode** | Day-to-day control: choose a zone, tap presets, apply profiles. The setup actions are hidden. |
|
||||
| **Edit mode** | Full setup from the **Menu**: devices, groups, outputs, sequences, zones, presets, patterns, colour palette, audio and settings, plus per-tile **Edit** on the strip. |
|
||||
|
||||
On narrow screens, **Menu** reaches the same actions as the desktop header.
|
||||
On narrow screens, **Menu** also holds the header actions, so it is there in Run mode too.
|
||||
|
||||
---
|
||||
|
||||
@@ -64,14 +64,14 @@ The preset editor:
|
||||
|
||||
## Devices and groups
|
||||
|
||||
- **Devices** (Edit mode) lists the LED drivers by MAC. Drivers appear by themselves when they boot or answer a ping; you can also add them by hand.
|
||||
- **Devices** (Edit mode) lists the LED drivers by name; **Edit** shows a driver's MAC. Drivers appear by themselves when they boot or answer a ping; you can also add them by hand.
|
||||
- **Ping drivers** checks which drivers answer (green dot with the round-trip time) and adds new ones.
|
||||
- **Identify** blinks a driver red for two seconds.
|
||||
- **Update groups** sends every driver its group membership.
|
||||
- **Edit** a device for its name, brightness and driver settings (LED count, colour order, power-on pattern).
|
||||
- **Edit** a device for its name, brightness, driver settings (LED count, colour order, power-on pattern) and the groups it is in.
|
||||
- **Groups** (Edit mode): put drivers in a group, set the group's brightness and driver defaults once, then attach the group to zones and sequence lanes.
|
||||
- Groups are shared by every profile unless you tick **this profile only**.
|
||||
- **Identify devices in group** blinks all members together.
|
||||
- **Identify** on a device, in the group or in the list to add from, blinks just that driver; **Identify devices in group** blinks all members together.
|
||||
|
||||
---
|
||||
|
||||
@@ -88,7 +88,7 @@ The preset editor:
|
||||
## Audio
|
||||
|
||||
- The controller listens through its microphone and detects the tempo and the bar.
|
||||
- While **Audio** is started, the microphone's beats time sequences and go to the drivers, so manual presets step on the music.
|
||||
- **Audio** is in the Menu in Edit mode. While it is started, the microphone's beats time sequences and go to the drivers, so manual presets step on the music.
|
||||
- While it is stopped, a clock at the **simulated BPM** does both instead.
|
||||
- **Reset detector** forgets a stuck tempo. The **/audio** page has a full readout, a tap for beat 1 and a live listen.
|
||||
|
||||
|
||||
Reference in new issue
Block a user