feat: sequences v2, bridges, and sim-controller
Rework sequences (engine, seqplay, envelope, API, web UI), add bridge support, add the host sim-controller and rig simulation tests, and update docs, presets and project tooling config. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
d664026ee5
commit
2543673bd8
68 files changed
+5761
-460
No files matched your search
+4
-4
@@ -15,7 +15,7 @@ This walks one ESP32-S3 controller (W5500 Ethernet, INMP441 mic) and one `led-dr
|
||||
docker run --rm -v "$PWD":/project -w /project espressif/idf:v5.5.5 idf.py menuconfig
|
||||
```
|
||||
|
||||
then *ESP-NOW config → Wi-Fi channel*. Alternatively set `CONFIG_ESPNOW_CHANNEL=<n>` in `sdkconfig.defaults` (delete `sdkconfig` after, so it is regenerated). To use the beat marker pin, also set `CONFIG_BEAT_TEST_GPIO` (for example 4) in the same menu.
|
||||
then *ESP-NOW config → Wi-Fi channel*. Alternatively set `CONFIG_ESPNOW_CHANNEL=<n>` in `sdkconfig.defaults` (delete `sdkconfig` after, so it is regenerated). To use the beat marker pin, also set `CONFIG_BEAT_TEST_GPIO` (for example 44) in the same menu.
|
||||
|
||||
## 1. Build and flash the controller
|
||||
|
||||
@@ -197,15 +197,15 @@ Close any serial monitor first (only one program can hold a port). Do not run lo
|
||||
|
||||
### True latency with a logic analyzer
|
||||
|
||||
For a measurement that does not depend on USB. Marker pins are set up already: the controller toggles **GPIO4 (D3)** when the first copy of each beat goes out (`CONFIG_BEAT_TEST_GPIO=4`, in `sdkconfig.defaults`) and the driver toggles **GPIO4 (D3)** when it fires (`"beat_pin": 4` in its `settings.json`). Both are XIAO ESP32S3 boards, where D3 is free.
|
||||
For a measurement that does not depend on USB. Marker pins are set up already: the controller toggles **GPIO44 (D7)** when the first copy of each beat goes out (`CONFIG_BEAT_TEST_GPIO=44`, in `sdkconfig.defaults`) and the driver toggles **GPIO44 (D7)** when it fires (`"beat_pin": 44` in its `settings.json`). Both are XIAO ESP32S3 boards, where D7 is free.
|
||||
|
||||
Wiring (3.3 V logic, any 2 or 3 channel analyzer):
|
||||
|
||||
| analyzer | connect to |
|
||||
|---|---|
|
||||
| GND | GND on the controller **and** GND on the driver (one common ground) |
|
||||
| channel 0 | controller **D3** |
|
||||
| channel 1 | driver **D3** |
|
||||
| channel 0 | controller **D7** |
|
||||
| channel 1 | driver **D7** |
|
||||
| channel 2 (optional) | driver **D10** (GPIO9, the LED data line) to see when the LEDs really update |
|
||||
|
||||
Steps:
|
||||
|
||||
Reference in new issue
Block a user