refactor: move the v2 controller to the repository root
The ESP-IDF project, docs, tools, tests and web UI move from v2/ to the root, and the Makefile, README, build scripts and test runner drop the v2/ prefix. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
71bd320661
commit
1c222771a5
66 files changed
+30
-31
No files matched your search
@@ -0,0 +1,139 @@
|
||||
menu "W5500 config"
|
||||
|
||||
config W5500_SPI_HOST
|
||||
int "SPI host number (1=SPI2, 2=SPI3)"
|
||||
range 1 2
|
||||
default 1
|
||||
|
||||
config W5500_SPI_CLOCK_MHZ
|
||||
int "SPI clock speed (MHz)"
|
||||
range 5 80
|
||||
default 20
|
||||
|
||||
config W5500_SCLK_GPIO
|
||||
int "SCLK GPIO (XIAO D8)"
|
||||
default 7
|
||||
|
||||
config W5500_MISO_GPIO
|
||||
int "MISO GPIO (XIAO D9)"
|
||||
default 8
|
||||
|
||||
config W5500_MOSI_GPIO
|
||||
int "MOSI GPIO (XIAO D10)"
|
||||
default 9
|
||||
|
||||
config W5500_CS_GPIO
|
||||
int "CS GPIO (XIAO D1)"
|
||||
default 2
|
||||
|
||||
config W5500_INT_GPIO
|
||||
int "INT GPIO (XIAO D2), -1 to poll"
|
||||
default 3
|
||||
|
||||
config W5500_POLL_PERIOD_MS
|
||||
int "RX poll period (ms) when INT is -1"
|
||||
default 10
|
||||
|
||||
config W5500_RST_GPIO
|
||||
int "RST GPIO (XIAO D0), -1 if not wired"
|
||||
default 1
|
||||
|
||||
endmenu
|
||||
|
||||
menu "INMP441 mic config"
|
||||
|
||||
config MIC_SCK_GPIO
|
||||
int "SCK GPIO (XIAO D4)"
|
||||
default 5
|
||||
|
||||
config MIC_WS_GPIO
|
||||
int "WS GPIO (XIAO D5)"
|
||||
default 6
|
||||
|
||||
config MIC_SD_GPIO
|
||||
int "SD GPIO (XIAO D6)"
|
||||
default 43
|
||||
|
||||
config MIC_STREAM_GAIN
|
||||
int "Digital gain for the audio stream (x)"
|
||||
range 1 256
|
||||
default 16
|
||||
help
|
||||
The INMP441 is quiet at full scale; x16 (+24 dB) makes speech
|
||||
audible without clipping at normal distances.
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Beat detection config"
|
||||
|
||||
config BEAT_LED_GPIO
|
||||
int "Beat LED GPIO (XIAO user LED is 21), -1 for none"
|
||||
default 21
|
||||
|
||||
config BEAT_LED_ACTIVE_LOW
|
||||
bool "Beat LED lights when the pin is low"
|
||||
default y
|
||||
|
||||
config BEAT_LED_PULSE_MS
|
||||
int "Beat LED flash length (ms)"
|
||||
range 10 500
|
||||
default 60
|
||||
|
||||
config BEAT_LED_DOWNBEAT_MS
|
||||
int "Beat LED flash length on the first beat of a bar (ms)"
|
||||
range 10 1000
|
||||
default 200
|
||||
|
||||
config BEAT_GATE_DBFS
|
||||
int "Ignore audio quieter than this (dBFS, before stream gain)"
|
||||
range -100 -20
|
||||
default -75
|
||||
help
|
||||
The INMP441 self-noise is about -87 dBFS. Background music in a
|
||||
room can sit around -65 dBFS, so keep this well below that.
|
||||
|
||||
config BEAT_LEAD_MS
|
||||
int "Fire predicted beats this early (ms)"
|
||||
range 0 200
|
||||
default 30
|
||||
help
|
||||
Beats are predicted from the tempo, so they can be sent early
|
||||
to cancel the ~30 ms of capture and analysis latency. Raise it
|
||||
to cover output latency too (e.g. network or lights).
|
||||
|
||||
endmenu
|
||||
|
||||
menu "ESP-NOW config"
|
||||
|
||||
config ESPNOW_CHANNEL
|
||||
int "Wi-Fi channel shared with the LED drivers"
|
||||
range 1 13
|
||||
default 6
|
||||
|
||||
config BEAT_TX_COPIES
|
||||
int "Copies sent of every beat frame"
|
||||
range 1 4
|
||||
default 2
|
||||
help
|
||||
Each beat is broadcast this many times with the same beat index.
|
||||
Drivers act on the first copy that arrives and drop the rest.
|
||||
|
||||
config BEAT_TX_GAP_US
|
||||
int "Gap between beat copies (us)"
|
||||
range 500 10000
|
||||
default 2000
|
||||
|
||||
config BEAT_TEST_GPIO
|
||||
int "GPIO toggled on every beat sent (-1 = off)"
|
||||
range -1 48
|
||||
default -1
|
||||
help
|
||||
For latency measurement: a logic analyzer or scope on this pin and on
|
||||
the driver's beat pin shows the true master-to-LED delay.
|
||||
|
||||
config BULK_HOLDOFF_US
|
||||
int "Hold bulk traffic back after a beat (us)"
|
||||
range 0 20000
|
||||
default 3000
|
||||
|
||||
endmenu
|
||||
Reference in new issue
Block a user