# flowforum Art-Net control for eight beamZ BCC145 parcans — web UI and MediaPipe pointing. Uses the **8 Channel** map from `~/projects/qlcplus/fixtures/beamZ-BCC145.qxf` and the stage patch from `flow_forum.qxw`: | CH | Name | |----|--------| | 1 | Dimmer | | 2 | Strobe | | 3 | Red | | 4 | Green | | 5 | Blue | | 6 | White | | 7 | Macro | | 8 | Speed | Fixture starts (1-based DMX): **88, 96, 104, 112, 120, 128, 136, 144**. Default Art-Net target: `dmx-gateway.local` universe 0. ## Setup ```bash pipenv install --dev ``` ## Web controller ```bash pipenv run server ``` Open http://localhost:8080 ## Point at a light Camera sits in the middle of the row of 4 (`#3–#6`) and **faces the performer** (+Y / audience). Stage map: `stage/map.json`. ```bash pipenv run point ``` Point with index finger extended (other fingers curled). Aimed can goes white. `b` blackout · `q` quit. Hand model downloads to `models/` on first run. ## Tests ```bash pipenv run test ``` ## Env - `ARTNET_IP` — destination host (default `dmx-gateway.local`) - `ARTNET_UNIVERSE` — Art-Net universe (default `0`) - `PORT` — HTTP port (default `8080`) - `RELOAD` — auto-reload web UI (default `1`; set `0` for show use) Stop QLC+ (or any other Art-Net source) on the same universe while using this.