/**
 * Example code for using a microchip mrf24j40 module to send and receive
 * packets using plain 802.15.4
 * Requirements: 3 pins for spi, 3 pins for reset, chip select and interrupt
 * notifications
 * This example file is considered to be in the public domain
 * Originally written by Karl Palsson, karlp@tweak.net.au, March 2011
 */

#define F_CPU 8000000UL
#include "../../src/mrf24j.h"
#include "../usart/src/usart.h"
#include "../../src/driver.h"
#include <avr/interrupt.h>
#include <util/delay.h>



Mrf24j mrf;
int i = 0;

void handle_rx();
void handle_tx();

int main() {
  usart::init(1000000);
  
  mrf.reset();
  mrf.init();
  
  mrf.set_pan(0xcafe);
  // This is _our_ address
  mrf.address16_write(0x4201); 
  mrf.handlers(&handle_rx, &handle_tx);
  //mrf.enable_wake();
  //mrf.set_bufferPHY(true);
  //mrf.turbo();
  //mrf.set_power(0b1100000);
  //mrf.sleep();
  
  sei();
  printf("Started\n\r");
  
  char tmp[20];
  while(1) {
    printf("txxxing... %i\n\r", i++);
    //mrf.wake();
    
    sprintf(tmp,"Received %i\n\r", i);
    mrf.send_str(0x4202, tmp);
    
    _delay_ms(2000);
  }
}



void handle_rx() {
    printf("received a packet %i  bytes long\n\r", mrf.get_rxinfo()->frame_length);
    
    if(mrf.get_bufferPHY()){
      printf("Packet data (PHY Payload):\n\r");
      for (int i = 0; i < mrf.get_rxinfo()->frame_length; i++) {
          printf("%i", mrf.get_rxbuf()[i]);
      }
    }
    
    // printf("\r\nASCII data (relevant data):\n\r");
    // for (int i = 0; i < mrf.rx_datalength(); i++) {
    //     usart::put(mrf.get_rxinfo()->rx_data[i]);
    // }
    
    printf("\r\nLQI/RSSI=");
    printf("%i/%i\n\r", mrf.get_rxinfo()->lqi, mrf.get_rxinfo()->rssi);
}

void handle_tx() {
    if (mrf.get_txinfo()->tx_ok) {
        printf("TX went ok, got ack %i\n\r", i);
    } else {
        printf("TX failed after %i retries\n\n\r",  mrf.get_txinfo()->retries);
    }
    printf("Sleeping\n\r");
    //mrf.sleep();
}