diff --git a/examples/RX_only/RX_only.pde b/examples/RX_only/RX_only.pde
index 624dc2c..67d3807 100644
--- a/examples/RX_only/RX_only.pde
+++ b/examples/RX_only/RX_only.pde
@@ -10,28 +10,36 @@
 #include <mrf24j.h>
 
 const int pin_reset = 6;
-const int pin_cs = 10; // default CS pin on ATMEGA8
-const int pin_interrupt = 2; // default interrupt pin on ATMEGA8
+const int pin_cs = 10; // default CS pin on ATmega8/168/328
+const int pin_interrupt = 2; // default interrupt pin on ATmega8/168/328
 
 Mrf24j mrf(pin_reset, pin_cs, pin_interrupt);
 
 void setup() {
   Serial.begin(9600);
-
+  
+  mrf.reset();
+  mrf.init();
+  
   mrf.set_pan(0xcafe);
   // This is _our_ address
   mrf.address16_write(0x6001); 
-  mrf.set_channel(12);
 
   // uncomment if you want to receive any packet on this channel
-  // mrf.set_promiscuous(true);
+  //mrf.set_promiscuous(true);
+  
+  // uncomment if you want to enable PA/LNA external control
+  //mrf.set_palna(true);
+  
+  // uncomment if you want to buffer all PHY Payload
+  //mrf.set_bufferPHY(true);
 
-  attachInterrupt(0, interrupt_routine, CHANGE); // interrupt 0 equivalent to pin 2 on ATMEGA8
+  attachInterrupt(0, interrupt_routine, CHANGE); // interrupt 0 equivalent to pin 2(INT0) on ATmega8/168/328
   interrupts();
 }
 
 void interrupt_routine() {
-  mrf.interrupt_handler();
+  mrf.interrupt_handler(); // mrf24 object interrupt routine
 }
 
 void loop() {
@@ -41,7 +49,14 @@ void loop() {
 void handle_rx() {
     Serial.print("received a packet ");Serial.print(mrf.get_rxinfo()->frame_length, DEC);Serial.println(" bytes long");
     
-    Serial.println("Packet data:");
+    if(mrf.get_bufferPHY()){
+      Serial.println("Packet data (PHY Payload):");
+      for (int i = 0; i < mrf.get_rxinfo()->frame_length; i++) {
+          Serial.print(mrf.get_rxbuf()[i]);
+      }
+    }
+    
+    Serial.println("\r\nASCII data (relevant data):");
     for (int i = 0; i < mrf.rx_datalength(); i++) {
         Serial.write(mrf.get_rxinfo()->rx_data[i]);
     }