avr
/
avrdude
mirror of https://github.com/mariusgreuel/avrdude.git
2
0
Fork 0
Code Issues Projects Releases Wiki Activity
avrdude/stk500v2.c

1706 lines
45 KiB
C
Raw Blame History

/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2005 Erik Walthinsen
* Copyright (C) 2002-2004 Brian S. Dean <bsd@bsdhome.com>
* Copyright (C) 2006 David Moore
* Copyright (C) 2006 Joerg Wunsch <j@uriah.heep.sax.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* $Id$ */
/* Based on Id: stk500.c,v 1.46 2004/12/22 01:52:45 bdean Exp */
/*
* avrdude interface for Atmel STK500V2 programmer
*
* As the AVRISP mkII device is basically an STK500v2 one that can
* only talk across USB, and that misses any kind of framing protocol,
* this is handled here as well.
*
* Note: most commands use the "universal command" feature of the
* programmer in a "pass through" mode, exceptions are "program
* enable", "paged read", and "paged write".
*
*/
#include "ac_cfg.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <limits.h>
#include <unistd.h>
#include <sys/time.h>
#include <time.h>
#include "avr.h"
#include "pgm.h"
#include "stk500_private.h" // temp until all code converted
#include "stk500v2_private.h"
#include "serial.h"
#include "usbdevs.h"
#define STK500V2_XTAL 7372800U
#if 0
#define DEBUG(format,args...) fprintf(stderr, format, ## args)
#else
#define DEBUG(format,args...)
#endif
#if 0
#define DEBUGRECV(format,args...) fprintf(stderr, format, ## args)
#else
#define DEBUGRECV(format,args...)
#endif
extern int verbose;
extern char * progname;
extern int do_cycles;
/*
* See stk500pp_read_byte() for an explanation of the flash and
* EEPROM page caches.
*/
static unsigned char *flash_pagecache;
static unsigned long flash_pageaddr;
static unsigned int flash_pagesize;
static unsigned char *eeprom_pagecache;
static unsigned long eeprom_pageaddr;
static unsigned int eeprom_pagesize;
/* page buffer for single-byte IO */
static unsigned char *pagebuf;
static unsigned char command_sequence = 1;
static int is_mk2; /* Is the device an AVRISP mkII? */
static int stk500v2_getparm(PROGRAMMER * pgm, unsigned char parm, unsigned char * value);
static int stk500v2_setparm(PROGRAMMER * pgm, unsigned char parm, unsigned char value);
static void stk500v2_print_parms1(PROGRAMMER * pgm, char * p);
static int stk500v2_is_page_empty(unsigned int address, int page_size,
const unsigned char *buf);
static int stk500v2_set_sck_period_mk2(PROGRAMMER * pgm, double v);
static int stk500v2_send_mk2(PROGRAMMER * pgm, unsigned char * data, size_t len)
{
if (serial_send(pgm->fd, data, len) != 0) {
fprintf(stderr,"%s: stk500_send_mk2(): failed to send command to serial port\n",progname);
exit(1);
}
return 0;
}
static int stk500v2_send(PROGRAMMER * pgm, unsigned char * data, size_t len)
{
unsigned char buf[275 + 6]; // max MESSAGE_BODY of 275 bytes, 6 bytes overhead
int i;
if (is_mk2)
return stk500v2_send_mk2(pgm, data, len);
buf[0] = MESSAGE_START;
buf[1] = command_sequence;
buf[2] = len / 256;
buf[3] = len % 256;
buf[4] = TOKEN;
memcpy(buf+5, data, len);
// calculate the XOR checksum
buf[5+len] = 0;
for (i=0;i<5+len;i++)
buf[5+len] ^= buf[i];
DEBUG("STK500V2: stk500v2_send(");
for (i=0;i<len+6;i++) DEBUG("0x%02x ",buf[i]);
DEBUG(", %d)\n",len+6);
if (serial_send(pgm->fd, buf, len+6) != 0) {
fprintf(stderr,"%s: stk500_send(): failed to send command to serial port\n",progname);
exit(1);
}
return 0;
}
static int stk500v2_drain(PROGRAMMER * pgm, int display)
{
return serial_drain(pgm->fd, display);
}
static int stk500v2_recv_mk2(PROGRAMMER * pgm, unsigned char msg[],
size_t maxsize)
{
int rv;
rv = serial_recv(pgm->fd, msg, maxsize);
if (rv < 0) {
fprintf(stderr, "%s: stk500v2_recv_mk2: error in USB receive\n", progname);
return -1;
}
return rv;
}
static int stk500v2_recv(PROGRAMMER * pgm, unsigned char msg[], size_t maxsize) {
enum states { sINIT, sSTART, sSEQNUM, sSIZE1, sSIZE2, sTOKEN, sDATA, sCSUM, sDONE } state = sSTART;
int msglen = 0;
int curlen = 0;
int timeout = 0;
unsigned char c, checksum = 0;
long timeoutval = 5; // seconds
struct timeval tv;
double tstart, tnow;
if (is_mk2)
return stk500v2_recv_mk2(pgm, msg, maxsize);
DEBUG("STK500V2: stk500v2_recv(): ");
gettimeofday(&tv, NULL);
tstart = tv.tv_sec;
while ( (state != sDONE ) && (!timeout) ) {
if (serial_recv(pgm->fd, &c, 1) < 0)
goto timedout;
DEBUG("0x%02x ",c);
checksum ^= c;
switch (state) {
case sSTART:
DEBUGRECV("hoping for start token...");
if (c == MESSAGE_START) {
DEBUGRECV("got it\n");
checksum = MESSAGE_START;
state = sSEQNUM;
} else
DEBUGRECV("sorry\n");
break;
case sSEQNUM:
DEBUGRECV("hoping for sequence...\n");
if (c == command_sequence) {
DEBUGRECV("got it, incrementing\n");
state = sSIZE1;
command_sequence++;
} else {
DEBUGRECV("sorry\n");
state = sSTART;
}
break;
case sSIZE1:
DEBUGRECV("hoping for size LSB\n");
msglen = c*256;
state = sSIZE2;
break;
case sSIZE2:
DEBUGRECV("hoping for size MSB...");
msglen += c;
DEBUG(" msg is %d bytes\n",msglen);
state = sTOKEN;
break;
case sTOKEN:
if (c == TOKEN) state = sDATA;
else state = sSTART;
break;
case sDATA:
if (curlen < maxsize) {
msg[curlen] = c;
} else {
fprintf(stderr, "%s: stk500v2_recv(): buffer too small, received %d byte into %zd byte buffer\n",
progname,curlen,maxsize);
return -2;
}
if ((curlen == 0) && (msg[0] == ANSWER_CKSUM_ERROR)) {
fprintf(stderr, "%s: stk500v2_recv(): previous packet sent with wrong checksum\n",
progname);
return -3;
}
curlen++;
if (curlen == msglen) state = sCSUM;
break;
case sCSUM:
if (checksum == 0) {
state = sDONE;
} else {
state = sSTART;
fprintf(stderr, "%s: stk500v2_recv(): checksum error\n",
progname);
return -4;
}
break;
default:
fprintf(stderr, "%s: stk500v2_recv(): unknown state\n",
progname);
return -5;
} /* switch */
gettimeofday(&tv, NULL);
tnow = tv.tv_sec;
if (tnow-tstart > timeoutval) { // wuff - signed/unsigned/overflow
timedout:
fprintf(stderr, "%s: stk500_2_ReceiveMessage(): timeout\n",
progname);
return -1;
}
} /* while */
DEBUG("\n");
return msglen+6;
}
static int stk500v2_getsync(PROGRAMMER * pgm) {
int tries = 0;
unsigned char buf[1], resp[32];
int status;
DEBUG("STK500V2: stk500v2_getsync()\n");
retry:
tries++;
// send the sync command and see if we can get there
buf[0] = CMD_SIGN_ON;
stk500v2_send(pgm, buf, 1);
// try to get the response back and see where we got
status = stk500v2_recv(pgm, resp, sizeof(resp));
// if we got bytes returned, check to see what came back
if (status > 0) {
if ((resp[0] == CMD_SIGN_ON) && (resp[1] == STATUS_CMD_OK)) {
// success!
return 0;
} else {
if (tries > 33) {
fprintf(stderr,
"%s: stk500v2_getsync(): can't communicate with device: resp=0x%02x\n",
progname, resp[0]);
return -6;
} else
goto retry;
}
// or if we got a timeout
} else if (status == -1) {
if (tries > 33) {
fprintf(stderr,"%s: stk500v2_getsync(): timeout communicating with programmer\n",
progname);
return -1;
} else
goto retry;
// or any other error
} else {
if (tries > 33) {
fprintf(stderr,"%s: stk500v2_getsync(): error communicating with programmer: (%d)\n",
progname,status);
} else
goto retry;
}
return 0;
}
static int stk500v2_command
(PROGRAMMER * pgm, unsigned char * buf, size_t len, size_t maxlen) {
int i;
int tries = 0;
int status;
DEBUG("STK500V2: stk500v2_command(");
for (i=0;i<len;i++) DEBUG("0x%02hhx ",buf[i]);
DEBUG(", %d)\n",len);
retry:
tries++;
// send the command to the programmer
stk500v2_send(pgm,buf,len);
// attempt to read the status back
status = stk500v2_recv(pgm,buf,maxlen);
// if we got a successful readback, return
if (status > 0) {
DEBUG(" = %d\n",status);
return status;
}
// otherwise try to sync up again
status = stk500v2_getsync(pgm);
if (status != 0) {
if (tries > 33) {
fprintf(stderr,"%s: stk500v2_command(): failed miserably to execute command 0x%02x\n",
progname,buf[0]);
return -1;
} else
goto retry;
}
DEBUG(" = 0\n");
return 0;
}
static int stk500v2_cmd(PROGRAMMER * pgm, unsigned char cmd[4],
unsigned char res[4])
{
unsigned char buf[8];
int result;
DEBUG("STK500V2: stk500v2_cmd(%02x,%02x,%02x,%02x)\n",cmd[0],cmd[1],cmd[2],cmd[3]);
buf[0] = CMD_SPI_MULTI;
buf[1] = 4;
buf[2] = 4;
buf[3] = 0;
buf[4] = cmd[0];
buf[5] = cmd[1];
buf[6] = cmd[2];
buf[7] = cmd[3];
result = stk500v2_command(pgm, buf, 8, sizeof(buf));
if (buf[1] != STATUS_CMD_OK) {
fprintf(stderr, "%s: stk500v2_cmd(): failed to send command\n",
progname);
return -1;
}
res[0] = buf[2];
res[1] = buf[3];
res[2] = buf[4];
res[3] = buf[5];
return 0;
}
static int stk500pp_cmd(PROGRAMMER * pgm, unsigned char cmd[4],
unsigned char res[4])
{
fprintf(stderr, "%s: stk500pp_command(): no direct SPI supported for PP mode\n",
progname);
return -1;
}
/*
* issue the 'chip erase' command to the AVR device
*/
static int stk500v2_chip_erase(PROGRAMMER * pgm, AVRPART * p)
{
int result;
unsigned char buf[16];
if (p->op[AVR_OP_CHIP_ERASE] == NULL) {
fprintf(stderr, "%s: stk500v2_chip_erase: chip erase instruction not defined for part \"%s\"\n",
progname, p->desc);
return -1;
}
pgm->pgm_led(pgm, ON);
buf[0] = CMD_CHIP_ERASE_ISP;
buf[1] = p->chip_erase_delay / 1000;
buf[2] = 0; // use delay (?)
avr_set_bits(p->op[AVR_OP_CHIP_ERASE], buf+3);
result = stk500v2_command(pgm, buf, 7, sizeof(buf));
usleep(p->chip_erase_delay);
pgm->initialize(pgm, p);
pgm->pgm_led(pgm, OFF);
return result;
}
/*
* issue the 'chip erase' command to the AVR device, parallel mode
*/
static int stk500pp_chip_erase(PROGRAMMER * pgm, AVRPART * p)
{
int result;
unsigned char buf[3];
pgm->pgm_led(pgm, ON);
buf[0] = CMD_CHIP_ERASE_PP;
buf[1] = 0; /* pulseWidth */
buf[2] = 5; /* pollTimeout */
result = stk500v2_command(pgm, buf, 3, sizeof(buf));
usleep(p->chip_erase_delay);
pgm->initialize(pgm, p);
pgm->pgm_led(pgm, OFF);
return result;
}
/*
* issue the 'program enable' command to the AVR device
*/
static int stk500v2_program_enable(PROGRAMMER * pgm, AVRPART * p)
{
unsigned char buf[16];
if (p->op[AVR_OP_PGM_ENABLE] == NULL) {
fprintf(stderr, "%s: stk500v2_program_enable(): program enable instruction not defined for part \"%s\"\n",
progname, p->desc);
return -1;
}
buf[0] = CMD_ENTER_PROGMODE_ISP;
buf[1] = p->timeout;
buf[2] = p->stabdelay;
buf[3] = p->cmdexedelay;
buf[4] = p->synchloops;
buf[5] = p->bytedelay;
buf[6] = p->pollvalue;
buf[7] = p->pollindex;
avr_set_bits(p->op[AVR_OP_PGM_ENABLE], buf+8);
return stk500v2_command(pgm, buf, 12, sizeof(buf));
}
/*
* issue the 'program enable' command to the AVR device, parallel mode
*/
static int stk500pp_program_enable(PROGRAMMER * pgm, AVRPART * p)
{
unsigned char buf[16];
buf[0] = CMD_ENTER_PROGMODE_PP;
buf[1] = p->ppenterstabdelay;
buf[2] = p->progmodedelay;
buf[3] = p->latchcycles;
buf[4] = p->togglevtg;
buf[5] = p->poweroffdelay;
buf[6] = p->resetdelayms;
buf[7] = p->resetdelayus;
return stk500v2_command(pgm, buf, 8, sizeof(buf));
}
/*
* initialize the AVR device and prepare it to accept commands
*/
static int stk500v2_initialize(PROGRAMMER * pgm, AVRPART * p)
{
return pgm->program_enable(pgm, p);
}
/*
* initialize the AVR device and prepare it to accept commands, parallel mode
*/
static int stk500pp_initialize(PROGRAMMER * pgm, AVRPART * p)
{
unsigned char buf[CTL_STACK_SIZE + 1];
int result;
LNODEID ln;
AVRMEM * m;
if (p->ctl_stack_type != CTL_STACK_PP) {
fprintf(stderr,
"%s: stk500pp_initialize(): "
"parallel programming control stack not defined for part \"%s\"\n",
progname, p->desc);
return -1;
}
buf[0] = CMD_SET_CONTROL_STACK;
memcpy(buf + 1, p->controlstack, CTL_STACK_SIZE);
result = stk500v2_command(pgm, buf, CTL_STACK_SIZE + 1, sizeof(buf));
if (result < 0 || buf[1] != STATUS_CMD_OK) {
fprintf(stderr,
"%s: stk500pp_initalize(): "
"failed to set control stack, got 0x%02x\n",
progname, buf[1]);
return -1;
}
/*
* Examine the avrpart's memory definitions, and initialize the page
* caches. For devices/memory that are not page oriented, treat
* them as page size 1 for EEPROM, and 2 for flash.
*/
flash_pagesize = 2;
eeprom_pagesize = 1;
for (ln = lfirst(p->mem); ln; ln = lnext(ln)) {
m = ldata(ln);
if (strcmp(m->desc, "flash") == 0) {
flash_pagesize = m->page_size;
} else if (strcmp(m->desc, "eeprom") == 0) {
eeprom_pagesize = m->page_size;
}
}
free(flash_pagecache);
free(eeprom_pagecache);
free(pagebuf);
if ((pagebuf = malloc(flash_pagesize + 5)) == NULL) {
fprintf(stderr, "%s: stk500pp_initialize(): Out of memory\n",
progname);
return -1;
}
if ((flash_pagecache = malloc(flash_pagesize)) == NULL) {
fprintf(stderr, "%s: stk500pp_initialize(): Out of memory\n",
progname);
free(pagebuf);
return -1;
}
if ((eeprom_pagecache = malloc(eeprom_pagesize)) == NULL) {
fprintf(stderr, "%s: stk500pp_initialize(): Out of memory\n",
progname);
free(flash_pagecache);
free(pagebuf);
return -1;
}
flash_pageaddr = eeprom_pageaddr = (unsigned long)-1L;
return pgm->program_enable(pgm, p);
}
static void stk500v2_disable(PROGRAMMER * pgm)
{
unsigned char buf[16];
int result;
buf[0] = CMD_LEAVE_PROGMODE_ISP;
buf[1] = 1; // preDelay;
buf[2] = 1; // postDelay;
result = stk500v2_command(pgm, buf, 3, sizeof(buf));
if (buf[1] != STATUS_CMD_OK) {
fprintf(stderr, "%s: stk500v2_disable(): failed to leave programming mode, got 0x%02x\n",
progname,buf[1]);
exit(1);
}
return;
}
static void stk500pp_disable(PROGRAMMER * pgm)
{
unsigned char buf[16];
int result;
free(pagebuf);
pagebuf = NULL;
free(flash_pagecache);
flash_pagecache = NULL;
free(eeprom_pagecache);
eeprom_pagecache = NULL;
buf[0] = CMD_LEAVE_PROGMODE_PP;
buf[1] = 15; // p->ppleavestabdelay;
buf[2] = 15; // p->resetdelay;
result = stk500v2_command(pgm, buf, 3, sizeof(buf));
if (result < 0 || buf[1] != STATUS_CMD_OK) {
fprintf(stderr,
"%s: stk500pp_disable(): "
"failed to leave programming mode, got 0x%02x\n",
progname,buf[1]);
exit(1);
}
return;
}
static void stk500v2_enable(PROGRAMMER * pgm)
{
return;
}
static int stk500v2_open(PROGRAMMER * pgm, char * port)
{
long baud = 115200;
DEBUG("STK500V2: stk500v2_open()\n");
if (pgm->baudrate)
baud = pgm->baudrate;
#if defined(HAVE_LIBUSB)
/*
* If the port name starts with "usb", divert the serial routines
* to the USB ones. The serial_open() function for USB overrides
* the meaning of the "baud" parameter to be the USB device ID to
* search for.
*/
if (strncmp(port, "usb", 3) == 0) {
serdev = &usb_serdev_frame;
baud = USB_DEVICE_AVRISPMKII;
is_mk2 = 1;
pgm->set_sck_period = stk500v2_set_sck_period_mk2;
}
#endif
strcpy(pgm->port, port);
pgm->fd = serial_open(port, baud);
/*
* drain any extraneous input
*/
stk500v2_drain(pgm, 0);
stk500v2_getsync(pgm);
stk500v2_drain(pgm, 0);
if (pgm->bitclock != 0.0) {
if (pgm->set_sck_period(pgm, pgm->bitclock) != 0)
return -1;
}
return 0;
}
static void stk500v2_close(PROGRAMMER * pgm)
{
DEBUG("STK500V2: stk500v2_close()\n");
serial_close(pgm->fd);
pgm->fd = -1;
}
static int stk500v2_loadaddr(PROGRAMMER * pgm, unsigned int addr)
{
unsigned char buf[16];
int result;
DEBUG("STK500V2: stk500v2_loadaddr(%d)\n",addr);
buf[0] = CMD_LOAD_ADDRESS;
buf[1] = (addr >> 24) & 0xff;
buf[2] = (addr >> 16) & 0xff;
buf[3] = (addr >> 8) & 0xff;
buf[4] = addr & 0xff;
result = stk500v2_command(pgm, buf, 5, sizeof(buf));
if (buf[1] != STATUS_CMD_OK) {
fprintf(stderr, "%s: stk500v2_loadaddr(): failed to set load address, got 0x%02x\n",
progname,buf[1]);
return -1;
}
return 0;
}
static int stk500pp_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
unsigned long addr, unsigned char * value)
{
int result, cmdlen = 2;
unsigned long paddr = 0UL, *paddr_ptr = NULL;
unsigned int pagesize = 0, use_ext_addr = 0, addrshift = 0;
unsigned char *cache_ptr = NULL;
if (verbose >= 2)
fprintf(stderr, "%s: stk500pp_read_byte(.., %s, 0x%lx, ...)\n",
progname, mem->desc, addr);
if (stk500pp_program_enable(pgm, p) < 0)
return -1;
if (strcmp(mem->desc, "flash") == 0) {
pagebuf[0] = CMD_READ_FLASH_PP;
cmdlen = 3;
pagesize = mem->page_size;
if (pagesize == 0)
pagesize = 2;
paddr = addr & ~(pagesize - 1);
paddr_ptr = &flash_pageaddr;
cache_ptr = flash_pagecache;
addrshift = 1;
/*
* If bit 31 is set, this indicates that the following read/write
* operation will be performed on a memory that is larger than
* 64KBytes. This is an indication to STK500 that a load extended
* address must be executed.
*/
if (mem->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
use_ext_addr = (1U << 31);
}
} else if (strcmp(mem->desc, "eeprom") == 0) {
pagebuf[0] = CMD_READ_EEPROM_PP;
cmdlen = 3;
pagesize = mem->page_size;
if (pagesize == 0)
pagesize = 1;
paddr = addr & ~(pagesize - 1);
paddr_ptr = &eeprom_pageaddr;
cache_ptr = eeprom_pagecache;
} else if (strcmp(mem->desc, "lfuse") == 0) {
pagebuf[0] = CMD_READ_FUSE_PP;
addr = 0;
} else if (strcmp(mem->desc, "hfuse") == 0) {
pagebuf[0] = CMD_READ_FUSE_PP;
addr = 1;
} else if (strcmp(mem->desc, "efuse") == 0) {
pagebuf[0] = CMD_READ_FUSE_PP;
addr = 2;
} else if (strcmp(mem->desc, "lock") == 0) {
pagebuf[0] = CMD_READ_LOCK_PP;
} else if (strcmp(mem->desc, "calibration") == 0) {
pagebuf[0] = CMD_READ_OSCCAL_PP;
} else if (strcmp(mem->desc, "signature") == 0) {
pagebuf[0] = CMD_READ_SIGNATURE_PP;
}
/*
* In parallel mode, we have to use paged reads for flash and
* EEPROM, and cache the results in a page cache.
*
* Page cache validation is based on "{flash,eeprom}_pageaddr"
* (holding the base address of the most recent cache fill
* operation). This variable is set to (unsigned long)-1L when the
* cache needs to be invalidated.
*/
if (pagesize && paddr == *paddr_ptr) {
*value = cache_ptr[addr & (pagesize - 1)];
return 0;
}
if (cmdlen == 3) {
/* long command, fill in # of bytes */
pagebuf[1] = (pagesize >> 8) & 0xff;
pagebuf[2] = pagesize & 0xff;
/* flash and EEPROM reads require the load address command */
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
} else {
pagebuf[1] = addr;
}
if (verbose >= 2)
fprintf(stderr, "%s: stk500pp_read_byte(): Sending read memory command: ",
progname);
result = stk500v2_command(pgm, pagebuf, cmdlen, pagesize == 0? 3: pagesize + 3);
if (result < 0 || pagebuf[1] != STATUS_CMD_OK) {
fprintf(stderr,
"%s: stk500pp_read_byte(): "
"timeout/error communicating with programmer (status %d)\n",
progname, result);
return -1;
}
if (pagesize) {
*paddr_ptr = paddr;
memcpy(cache_ptr, pagebuf + 2, pagesize);
*value = cache_ptr[addr & (pagesize - 1)];
} else {
*value = pagebuf[2];
}
return 0;
}
static int stk500pp_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * mem,
unsigned long addr, unsigned char data)
{
int result, cmdlen;
unsigned long paddr = 0UL, *paddr_ptr = NULL;
unsigned int pagesize = 0, use_ext_addr = 0, addrshift = 0;
unsigned char *cache_ptr = NULL;
if (verbose >= 2)
fprintf(stderr, "%s: stk500pp_write_byte(.., %s, 0x%lx, ...)\n",
progname, mem->desc, addr);
if (stk500pp_program_enable(pgm, p) < 0)
return -1;
if (strcmp(mem->desc, "flash") == 0) {
pagebuf[0] = CMD_PROGRAM_FLASH_PP;
pagesize = mem->page_size;
if (pagesize == 0)
pagesize = 2;
paddr = addr & ~(pagesize - 1);
paddr_ptr = &flash_pageaddr;
cache_ptr = flash_pagecache;
addrshift = 1;
/*
* If bit 31 is set, this indicates that the following read/write
* operation will be performed on a memory that is larger than
* 64KBytes. This is an indication to STK500 that a load extended
* address must be executed.
*/
if (mem->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
use_ext_addr = (1U << 31);
}
} else if (strcmp(mem->desc, "eeprom") == 0) {
pagebuf[0] = CMD_PROGRAM_EEPROM_PP;
pagesize = mem->page_size;
if (pagesize == 0)
pagesize = 1;
paddr = addr & ~(pagesize - 1);
paddr_ptr = &eeprom_pageaddr;
cache_ptr = eeprom_pagecache;
} else if (strcmp(mem->desc, "lfuse") == 0) {
pagebuf[0] = CMD_PROGRAM_FUSE_PP;
addr = 0;
} else if (strcmp(mem->desc, "hfuse") == 0) {
pagebuf[0] = CMD_PROGRAM_FUSE_PP;
addr = 1;
} else if (strcmp(mem->desc, "efuse") == 0) {
pagebuf[0] = CMD_PROGRAM_FUSE_PP;
addr = 2;
} else if (strcmp(mem->desc, "lock") == 0) {
pagebuf[0] = CMD_PROGRAM_LOCK_PP;
} else {
fprintf(stderr,
"%s: stk500pp_write_byte(): "
"unsupported memory type: %s\n",
progname, mem->desc);
return -1;
}
cmdlen = 5 + pagesize;
/*
* In parallel mode, we have to use paged writes for flash and
* EEPROM. As both, flash and EEPROM cells can only be programmed
* from `1' to `0' bits (even EEPROM does not support auto-erase in
* parallel mode), we just pre-fill the page cache with 0xff, so all
* those cells that are outside our current address will remain
* unaffected.
*/
if (pagesize) {
memset(cache_ptr, 0xff, pagesize);
cache_ptr[addr & (pagesize - 1)] = data;
/* long command, fill in # of bytes */
pagebuf[1] = (pagesize >> 8) & 0xff;
pagebuf[2] = pagesize & 0xff;
pagebuf[3] = mem->mode | 0x80;
pagebuf[4] = mem->delay;
memcpy(pagebuf + 5, cache_ptr, pagesize);
/* flash and EEPROM reads require the load address command */
stk500v2_loadaddr(pgm, use_ext_addr | (paddr >> addrshift));
} else {
pagebuf[1] = addr;
pagebuf[2] = data;
pagebuf[3] = 0; /* pulseWidth */
pagebuf[4] = 5; /* pollTimeout */
}
if (verbose >= 2)
fprintf(stderr, "%s: stk500pp_write_byte(): Sending write memory command: ",
progname);
result = stk500v2_command(pgm, pagebuf, cmdlen, cmdlen);
if (result < 0 || pagebuf[1] != STATUS_CMD_OK) {
fprintf(stderr,
"%s: stk500pp_write_byte(): "
"timeout/error communicating with programmer (status %d)\n",
progname, result);
return -1;
}
if (pagesize) {
/* Invalidate the page cache. */
*paddr_ptr = (unsigned long)-1L;
}
return 0;
}
static int stk500v2_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
int page_size, int n_bytes)
{
unsigned int addr, block_size, last_addr, hiaddr, addrshift, use_ext_addr;
unsigned char commandbuf[10];
unsigned char buf[266];
unsigned char cmds[4];
int result;
OPCODE * rop, * wop;
DEBUG("STK500V2: stk500v2_paged_write(..,%s,%d,%d)\n",m->desc,page_size,n_bytes);
if (page_size == 0) page_size = 256;
hiaddr = UINT_MAX;
addrshift = 0;
use_ext_addr = 0;
// determine which command is to be used
if (strcmp(m->desc, "flash") == 0) {
addrshift = 1;
commandbuf[0] = CMD_PROGRAM_FLASH_ISP;
/*
* If bit 31 is set, this indicates that the following read/write
* operation will be performed on a memory that is larger than
* 64KBytes. This is an indication to STK500 that a load extended
* address must be executed.
*/
if (m->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
use_ext_addr = (1U << 31);
}
} else if (strcmp(m->desc, "eeprom") == 0) {
commandbuf[0] = CMD_PROGRAM_EEPROM_ISP;
}
commandbuf[4] = m->delay;
if (addrshift == 0) {
wop = m->op[AVR_OP_WRITE];
rop = m->op[AVR_OP_READ];
}
else {
wop = m->op[AVR_OP_WRITE_LO];
rop = m->op[AVR_OP_READ_LO];
}
// if the memory is paged, load the appropriate commands into the buffer
if (m->mode & 0x01) {
commandbuf[3] = m->mode | 0x80; // yes, write the page to flash
if (m->op[AVR_OP_LOADPAGE_LO] == NULL) {
fprintf(stderr, "%s: stk500v2_paged_write: loadpage instruction not defined for part \"%s\"\n",
progname, p->desc);
return -1;
}
avr_set_bits(m->op[AVR_OP_LOADPAGE_LO], cmds);
commandbuf[5] = cmds[0];
if (m->op[AVR_OP_WRITEPAGE] == NULL) {
fprintf(stderr, "%s: stk500v2_paged_write: write page instruction not defined for part \"%s\"\n",
progname, p->desc);
return -1;
}
avr_set_bits(m->op[AVR_OP_WRITEPAGE], cmds);
commandbuf[6] = cmds[0];
// otherwise, we need to load different commands in
}
else {
commandbuf[3] = m->mode | 0x80; // yes, write the words to flash
if (wop == NULL) {
fprintf(stderr, "%s: stk500v2_paged_write: write instruction not defined for part \"%s\"\n",
progname, p->desc);
return -1;
}
avr_set_bits(wop, cmds);
commandbuf[5] = cmds[0];
commandbuf[6] = 0;
}
// the read command is common to both methods
if (rop == NULL) {
fprintf(stderr, "%s: stk500v2_paged_write: read instruction not defined for part \"%s\"\n",
progname, p->desc);
return -1;
}
avr_set_bits(rop, cmds);
commandbuf[7] = cmds[0];
commandbuf[8] = m->readback[0];
commandbuf[9] = m->readback[1];
last_addr=UINT_MAX; /* impossible address */
for (addr=0; addr < n_bytes; addr += page_size) {
report_progress(addr,n_bytes,NULL);
if ((n_bytes-addr) < page_size)
block_size = n_bytes - addr;
else
block_size = page_size;
DEBUG("block_size at addr %d is %d\n",addr,block_size);
if(commandbuf[0] == CMD_PROGRAM_FLASH_ISP){
if (stk500v2_is_page_empty(addr, block_size, m->buf)) {
continue;
}
}
memcpy(buf,commandbuf,sizeof(commandbuf));
buf[1] = block_size >> 8;
buf[2] = block_size & 0xff;
if((last_addr==UINT_MAX)||(last_addr+block_size != addr)){
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
}
last_addr=addr;
memcpy(buf+10,m->buf+addr, block_size);
result = stk500v2_command(pgm,buf,block_size+10, sizeof(buf));
if (buf[1] != STATUS_CMD_OK) {
fprintf(stderr,"%s: stk500v2_paged_write: write command failed with %d\n",
progname,buf[1]);
return -1;
}
}
return n_bytes;
}
static int stk500pp_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
int page_size, int n_bytes)
{
unsigned int addr, block_size, last_addr, hiaddr, addrshift, use_ext_addr;
unsigned char commandbuf[5];
int result;
DEBUG("STK500V2: stk500pp_paged_write(..,%s,%d,%d)\n",m->desc,page_size,n_bytes);
if (page_size == 0) page_size = 256;
hiaddr = UINT_MAX;
addrshift = 0;
use_ext_addr = 0;
// determine which command is to be used
if (strcmp(m->desc, "flash") == 0) {
addrshift = 1;
flash_pageaddr = (unsigned long)-1L;
commandbuf[0] = CMD_PROGRAM_FLASH_PP;
/*
* If bit 31 is set, this indicates that the following read/write
* operation will be performed on a memory that is larger than
* 64KBytes. This is an indication to STK500 that a load extended
* address must be executed.
*/
if (m->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
use_ext_addr = (1U << 31);
}
} else if (strcmp(m->desc, "eeprom") == 0) {
eeprom_pageaddr = (unsigned long)-1L;
commandbuf[0] = CMD_PROGRAM_EEPROM_PP;
}
commandbuf[3] = m->mode | 0x80; // yes, write the page to flash
commandbuf[4] = m->delay;
last_addr = UINT_MAX; /* impossible address */
for (addr=0; addr < n_bytes; addr += page_size) {
report_progress(addr,n_bytes,NULL);
if ((n_bytes-addr) < page_size)
block_size = n_bytes - addr;
else
block_size = page_size;
DEBUG("block_size at addr %d is %d\n",addr,block_size);
if (commandbuf[0] == CMD_PROGRAM_FLASH_PP){
if (stk500v2_is_page_empty(addr, block_size, m->buf)) {
continue;
}
}
memcpy(pagebuf, commandbuf, sizeof(commandbuf));
pagebuf[1] = block_size >> 8;
pagebuf[2] = block_size & 0xff;
if ((last_addr == UINT_MAX) || (last_addr + block_size != addr)) {
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
}
last_addr=addr;
memcpy(pagebuf + 5, m->buf + addr, block_size);
result = stk500v2_command(pgm, pagebuf, block_size + 5, page_size + 5);
if (pagebuf[1] != STATUS_CMD_OK) {
fprintf(stderr, "%s: stk500pp_paged_write: write command failed with %d\n",
progname, pagebuf[1]);
return -1;
}
}
return n_bytes;
}
static int stk500v2_is_page_empty(unsigned int address, int page_size,
const unsigned char *buf)
{
int i;
for(i = 0; i < page_size; i++) {
if(buf[address + i] != 0xFF) {
/* Page is not empty. */
return(0);
}
}
/* Page is empty. */
return(1);
}
static int stk500v2_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
int page_size, int n_bytes)
{
unsigned int addr, block_size, hiaddr, addrshift, use_ext_addr;
unsigned char commandbuf[4];
unsigned char buf[275]; // max buffer size for stk500v2 at this point
unsigned char cmds[4];
int result;
OPCODE * rop;
DEBUG("STK500V2: stk500v2_paged_load(..,%s,%d,%d)\n",m->desc,page_size,n_bytes);
page_size = m->readsize;
rop = m->op[AVR_OP_READ];
hiaddr = UINT_MAX;
addrshift = 0;
use_ext_addr = 0;
// determine which command is to be used
if (strcmp(m->desc, "flash") == 0) {
commandbuf[0] = CMD_READ_FLASH_ISP;
rop = m->op[AVR_OP_READ_LO];
addrshift = 1;
/*
* If bit 31 is set, this indicates that the following read/write
* operation will be performed on a memory that is larger than
* 64KBytes. This is an indication to STK500 that a load extended
* address must be executed.
*/
if (m->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
use_ext_addr = (1U << 31);
}
}
else if (strcmp(m->desc, "eeprom") == 0) {
commandbuf[0] = CMD_READ_EEPROM_ISP;
}
// the read command is common to both methods
if (rop == NULL) {
fprintf(stderr, "%s: stk500v2_paged_load: read instruction not defined for part \"%s\"\n",
progname, p->desc);
return -1;
}
avr_set_bits(rop, cmds);
commandbuf[3] = cmds[0];
for (addr=0; addr < n_bytes; addr += page_size) {
report_progress(addr, n_bytes,NULL);
if ((n_bytes-addr) < page_size)
block_size = n_bytes - addr;
else
block_size = page_size;
DEBUG("block_size at addr %d is %d\n",addr,block_size);
memcpy(buf,commandbuf,sizeof(commandbuf));
buf[1] = block_size >> 8;
buf[2] = block_size & 0xff;
// Ensure a new "load extended address" will be issued
// when crossing a 64 KB boundary in flash.
if (hiaddr != (addr & ~0xFFFF)) {
hiaddr = addr & ~0xFFFF;
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
}
result = stk500v2_command(pgm,buf,4,sizeof(buf));
if (buf[1] != STATUS_CMD_OK) {
fprintf(stderr,"%s: stk500v2_paged_load: read command failed with %d\n",
progname,buf[1]);
return -1;
}
#if 0
for (i=0;i<page_size;i++) {
fprintf(stderr,"%02X",buf[2+i]);
if (i%16 == 15) fprintf(stderr,"\n");
}
#endif
memcpy(&m->buf[addr], &buf[2], block_size);
}
return n_bytes;
}
static int stk500pp_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
int page_size, int n_bytes)
{
unsigned int addr, block_size, hiaddr, addrshift, use_ext_addr;
unsigned char commandbuf[3];
int result;
DEBUG("STK500V2: stk500pp_paged_load(..,%s,%d,%d)\n",m->desc,page_size,n_bytes);
page_size = m->readsize;
hiaddr = UINT_MAX;
addrshift = 0;
use_ext_addr = 0;
// determine which command is to be used
if (strcmp(m->desc, "flash") == 0) {
commandbuf[0] = CMD_READ_FLASH_PP;
addrshift = 1;
/*
* If bit 31 is set, this indicates that the following read/write
* operation will be performed on a memory that is larger than
* 64KBytes. This is an indication to STK500 that a load extended
* address must be executed.
*/
if (m->op[AVR_OP_LOAD_EXT_ADDR] != NULL) {
use_ext_addr = (1U << 31);
}
}
else if (strcmp(m->desc, "eeprom") == 0) {
commandbuf[0] = CMD_READ_EEPROM_PP;
}
for (addr = 0; addr < n_bytes; addr += page_size) {
report_progress(addr, n_bytes, NULL);
if ((n_bytes-addr) < page_size)
block_size = n_bytes - addr;
else
block_size = page_size;
DEBUG("block_size at addr %d is %d\n",addr,block_size);
memcpy(pagebuf, commandbuf, sizeof(commandbuf));
pagebuf[1] = block_size >> 8;
pagebuf[2] = block_size & 0xff;
// Ensure a new "load extended address" will be issued
// when crossing a 64 KB boundary in flash.
if (hiaddr != (addr & ~0xFFFF)) {
hiaddr = addr & ~0xFFFF;
stk500v2_loadaddr(pgm, use_ext_addr | (addr >> addrshift));
}
result = stk500v2_command(pgm, pagebuf, 3, block_size + 3);
if (pagebuf[1] != STATUS_CMD_OK) {
fprintf(stderr, "%s: stk500pp_paged_load: read command failed with %d\n",
progname, pagebuf[1]);
return -1;
}
#if 0
for (i = 0; i < page_size; i++) {
fprintf(stderr, "%02X", buf[2 + i]);
if (i % 16 == 15) fprintf(stderr, "\n");
}
#endif
memcpy(&m->buf[addr], &pagebuf[2], block_size);
}
return n_bytes;
}
static int stk500v2_set_vtarget(PROGRAMMER * pgm, double v)
{
unsigned char uaref, utarg;
utarg = (unsigned)((v + 0.049) * 10);
if (stk500v2_getparm(pgm, PARAM_VADJUST, &uaref) != 0) {
fprintf(stderr,
"%s: stk500v2_set_vtarget(): cannot obtain V[aref]\n",
progname);
return -1;
}
if (uaref > utarg) {
fprintf(stderr,
"%s: stk500v2_set_vtarget(): reducing V[aref] from %.1f to %.1f\n",
progname, uaref / 10.0, v);
if (stk500v2_setparm(pgm, PARAM_VADJUST, utarg)
!= 0)
return -1;
}
return stk500v2_setparm(pgm, PARAM_VTARGET, utarg);
}
static int stk500v2_set_varef(PROGRAMMER * pgm, double v)
{
unsigned char uaref, utarg;
uaref = (unsigned)((v + 0.049) * 10);
if (stk500v2_getparm(pgm, PARAM_VTARGET, &utarg) != 0) {
fprintf(stderr,
"%s: stk500v2_set_varef(): cannot obtain V[target]\n",
progname);
return -1;
}
if (uaref > utarg) {
fprintf(stderr,
"%s: stk500v2_set_varef(): V[aref] must not be greater than "
"V[target] = %.1f\n",
progname, utarg / 10.0);
return -1;
}
return stk500v2_setparm(pgm, PARAM_VADJUST, uaref);
}
static int stk500v2_set_fosc(PROGRAMMER * pgm, double v)
{
int fosc;
unsigned char prescale, cmatch;
static unsigned ps[] = {
1, 8, 32, 64, 128, 256, 1024
};
int idx, rc;
prescale = cmatch = 0;
if (v > 0.0) {
if (v > STK500V2_XTAL / 2) {
const char *unit;
if (v > 1e6) {
v /= 1e6;
unit = "MHz";
} else if (v > 1e3) {
v /= 1e3;
unit = "kHz";
} else
unit = "Hz";
fprintf(stderr,
"%s: stk500v2_set_fosc(): f = %.3f %s too high, using %.3f MHz\n",
progname, v, unit, STK500V2_XTAL / 2e6);
fosc = STK500V2_XTAL / 2;
} else
fosc = (unsigned)v;
for (idx = 0; idx < sizeof(ps) / sizeof(ps[0]); idx++) {
if (fosc >= STK500V2_XTAL / (256 * ps[idx] * 2)) {
/* this prescaler value can handle our frequency */
prescale = idx + 1;
cmatch = (unsigned)(STK500V2_XTAL / (2 * fosc * ps[idx])) - 1;
break;
}
}
if (idx == sizeof(ps) / sizeof(ps[0])) {
fprintf(stderr, "%s: stk500v2_set_fosc(): f = %u Hz too low, %u Hz min\n",
progname, fosc, STK500V2_XTAL / (256 * 1024 * 2));
return -1;
}
}
if ((rc = stk500v2_setparm(pgm, PARAM_OSC_PSCALE, prescale)) != 0
|| (rc = stk500v2_setparm(pgm, PARAM_OSC_CMATCH, cmatch)) != 0)
return rc;
return 0;
}
/* The list of SCK frequencies supported by the AVRISP mkII, as listed
* in AVR069 */
double avrispmkIIfreqs[] = {
8000000, 4000000, 2000000, 1000000, 500000, 250000, 125000,
96386, 89888, 84211, 79208, 74767, 70797, 67227, 64000,
61069, 58395, 55945, 51613, 49690, 47905, 46243, 43244,
41885, 39409, 38278, 36200, 34335, 32654, 31129, 29740,
28470, 27304, 25724, 24768, 23461, 22285, 21221, 20254,
19371, 18562, 17583, 16914, 16097, 15356, 14520, 13914,
13224, 12599, 12031, 11511, 10944, 10431, 9963, 9468,
9081, 8612, 8239, 7851, 7498, 7137, 6809, 6478, 6178,
5879, 5607, 5359, 5093, 4870, 4633, 4418, 4209, 4019,
3823, 3645, 3474, 3310, 3161, 3011, 2869, 2734, 2611,
2484, 2369, 2257, 2152, 2052, 1956, 1866, 1779, 1695,
1615, 1539, 1468, 1398, 1333, 1271, 1212, 1155, 1101,
1049, 1000, 953, 909, 866, 826, 787, 750, 715, 682,
650, 619, 590, 563, 536, 511, 487, 465, 443, 422,
402, 384, 366, 349, 332, 317, 302, 288, 274, 261,
249, 238, 226, 216, 206, 196, 187, 178, 170, 162,
154, 147, 140, 134, 128, 122, 116, 111, 105, 100,
95.4, 90.9, 86.6, 82.6, 78.7, 75.0, 71.5, 68.2,
65.0, 61.9, 59.0, 56.3, 53.6, 51.1
};
static int stk500v2_set_sck_period_mk2(PROGRAMMER * pgm, double v)
{
int i;
for (i = 0; i < sizeof(avrispmkIIfreqs); i++) {
if (1 / avrispmkIIfreqs[i] >= v)
break;
}
fprintf(stderr, "Using p = %.2f us for SCK (param = %d)\n",
1000000 / avrispmkIIfreqs[i], i);
return stk500v2_setparm(pgm, PARAM_SCK_DURATION, i);
}
/* This code assumes that each count of the SCK duration parameter
represents 8/f, where f is the clock frequency of the STK500V2 master
processors (not the target). This number comes from Atmel
application note AVR061. It appears that the STK500V2 bit bangs SCK.
For small duration values, the actual SCK width is larger than
expected. As the duration value increases, the SCK width error
diminishes. */
static int stk500v2_set_sck_period(PROGRAMMER * pgm, double v)
{
unsigned char dur;
double min, max;
min = 8.0 / STK500V2_XTAL;
max = 255 * min;
dur = v / min + 0.5;
if (v < min) {
dur = 1;
fprintf(stderr,
"%s: stk500v2_set_sck_period(): p = %.1f us too small, using %.1f us\n",
progname, v / 1e-6, dur * min / 1e-6);
} else if (v > max) {
dur = 255;
fprintf(stderr,
"%s: stk500v2_set_sck_period(): p = %.1f us too large, using %.1f us\n",
progname, v / 1e-6, dur * min / 1e-6);
}
return stk500v2_setparm(pgm, PARAM_SCK_DURATION, dur);
}
static int stk500v2_getparm(PROGRAMMER * pgm, unsigned char parm, unsigned char * value)
{
unsigned char buf[32];
buf[0] = CMD_GET_PARAMETER;
buf[1] = parm;
if (stk500v2_command(pgm, buf, 2, sizeof(buf)) < 0) {
fprintf(stderr,"%s: stk500v2_getparm(): failed to get parameter 0x%02x\n",
progname, parm);
return -1;
}
*value = buf[2];
return 0;
}
static int stk500v2_setparm_real(PROGRAMMER * pgm, unsigned char parm, unsigned char value)
{
unsigned char buf[32];
buf[0] = CMD_SET_PARAMETER;
buf[1] = parm;
buf[2] = value;
if (stk500v2_command(pgm, buf, 3, sizeof(buf)) < 0) {
fprintf(stderr, "\n%s: stk500v2_setparm(): failed to set parameter 0x%02x\n",
progname, parm);
return -1;
}
return 0;
}
static int stk500v2_setparm(PROGRAMMER * pgm, unsigned char parm, unsigned char value)
{
unsigned char current_value;
int res;
res = stk500v2_getparm(pgm, parm, &current_value);
if (res < 0)
fprintf(stderr, "%s: Unable to get parameter 0x%02x\n", progname, parm);
// don't issue a write if the correct value is already set.
if (value == current_value) {
fprintf(stderr, "%s: Skipping paramter write; parameter value already set.\n", progname);
return 0;
}
return stk500v2_setparm_real(pgm, parm, value);
}
static void stk500v2_display(PROGRAMMER * pgm, char * p)
{
unsigned char maj, min, hdw, topcard;
const char *topcard_name;
stk500v2_getparm(pgm, PARAM_HW_VER, &hdw);
stk500v2_getparm(pgm, PARAM_SW_MAJOR, &maj);
stk500v2_getparm(pgm, PARAM_SW_MINOR, &min);
stk500v2_getparm(pgm, PARAM_TOPCARD_DETECT, &topcard);
fprintf(stderr, "%sHardware Version: %d\n", p, hdw);
fprintf(stderr, "%sFirmware Version: %d.%d\n", p, maj, min);
if (1) { // should check to see if it's a stk500 first
switch (topcard) {
case 0xAA: topcard_name = "STK501"; break;
case 0x55: topcard_name = "STK502"; break;
case 0xFA: topcard_name = "STK503"; break;
case 0xEE: topcard_name = "STK504"; break;
case 0xE4: topcard_name = "STK505"; break;
case 0xDD: topcard_name = "STK520"; break;
default: topcard_name = "Unknown"; break;
}
fprintf(stderr, "%sTopcard : %s\n", p, topcard_name);
}
stk500v2_print_parms1(pgm, p);
return;
}
static void stk500v2_print_parms1(PROGRAMMER * pgm, char * p)
{
unsigned char vtarget, vadjust, osc_pscale, osc_cmatch, sck_duration;
stk500v2_getparm(pgm, PARAM_VTARGET, &vtarget);
stk500v2_getparm(pgm, PARAM_VADJUST, &vadjust);
stk500v2_getparm(pgm, PARAM_OSC_PSCALE, &osc_pscale);
stk500v2_getparm(pgm, PARAM_OSC_CMATCH, &osc_cmatch);
stk500v2_getparm(pgm, PARAM_SCK_DURATION, &sck_duration);
fprintf(stderr, "%sVtarget : %.1f V\n", p, vtarget / 10.0);
fprintf(stderr, "%sVaref : %.1f V\n", p, vadjust / 10.0);
fprintf(stderr, "%sOscillator : ", p);
if (osc_pscale == 0)
fprintf(stderr, "Off\n");
else {
int prescale = 1;
double f = STK500V2_XTAL / 2;
const char *unit;
switch (osc_pscale) {
case 2: prescale = 8; break;
case 3: prescale = 32; break;
case 4: prescale = 64; break;
case 5: prescale = 128; break;
case 6: prescale = 256; break;
case 7: prescale = 1024; break;
}
f /= prescale;
f /= (osc_cmatch + 1);
if (f > 1e6) {
f /= 1e6;
unit = "MHz";
} else if (f > 1e3) {
f /= 1000;
unit = "kHz";
} else
unit = "Hz";
fprintf(stderr, "%.3f %s\n", f, unit);
}
if (is_mk2)
fprintf(stderr, "%sSCK period : %.2f us\n", p,
(float) 1000000 / avrispmkIIfreqs[sck_duration]);
else
fprintf(stderr, "%sSCK period : %.1f us\n", p,
sck_duration * 8.0e6 / STK500V2_XTAL + 0.05);
return;
}
static void stk500v2_print_parms(PROGRAMMER * pgm)
{
stk500v2_print_parms1(pgm, "");
}
void stk500v2_initpgm(PROGRAMMER * pgm)
{
strcpy(pgm->type, "STK500V2");
/*
* mandatory functions
*/
pgm->initialize = stk500v2_initialize;
pgm->display = stk500v2_display;
pgm->enable = stk500v2_enable;
pgm->disable = stk500v2_disable;
pgm->program_enable = stk500v2_program_enable;
pgm->chip_erase = stk500v2_chip_erase;
pgm->cmd = stk500v2_cmd;
pgm->open = stk500v2_open;
pgm->close = stk500v2_close;
/*
* optional functions
*/
pgm->paged_write = stk500v2_paged_write;
pgm->paged_load = stk500v2_paged_load;
pgm->print_parms = stk500v2_print_parms;
pgm->set_vtarget = stk500v2_set_vtarget;
pgm->set_varef = stk500v2_set_varef;
pgm->set_fosc = stk500v2_set_fosc;
pgm->set_sck_period = stk500v2_set_sck_period;
pgm->page_size = 256;
}
void stk500pp_initpgm(PROGRAMMER * pgm)
{
strcpy(pgm->type, "STK500PP");
/*
* mandatory functions
*/
pgm->initialize = stk500pp_initialize;
pgm->display = stk500v2_display;
pgm->enable = stk500v2_enable;
pgm->disable = stk500pp_disable;
pgm->program_enable = stk500pp_program_enable;
pgm->chip_erase = stk500pp_chip_erase;
pgm->cmd = stk500pp_cmd;
pgm->open = stk500v2_open;
pgm->close = stk500v2_close;
/*
* optional functions
*/
pgm->read_byte = stk500pp_read_byte;
pgm->write_byte = stk500pp_write_byte;
pgm->paged_write = stk500pp_paged_write;
pgm->paged_load = stk500pp_paged_load;
pgm->print_parms = stk500v2_print_parms;
pgm->set_vtarget = stk500v2_set_vtarget;
pgm->set_varef = stk500v2_set_varef;
pgm->set_fosc = stk500v2_set_fosc;
pgm->set_sck_period = stk500v2_set_sck_period;
pgm->page_size = 256;
}
Reference in New Issue View Git Blame Copy Permalink