avrdude/avrdude.conf.sample

311 lines
8.2 KiB
Plaintext

# $Id$
#
# AVRPROG Configuration File
#
# This file contains configuration data used by AVRPROG which describes
# the programming hardware pinouts and also provides part definitions.
# AVRPROG's "-C" command line option specifies the location of the
# configuration file. The "-c" option names the programmer confiuration
# which must match one of the entry's "id" parameter. The "-p" option
# identifies which part AVRPROG is going to be programming and must match
# one of the parts' "id" parameter.
#
# Possible entry formats are:
#
# programmer
# id = <id1> [, <id2> [, <id3>] ...] ; # <idN> are quoted strings
# desc = <description> ; # quoted string
# vcc = <num1> [, <num2> ... ] ; # pin number
# reset = <num> ; # pin number
# sck = <num> ; # pin number
# mosi = <num> ; # pin number
# miso = <num> ; # pin number
# errled = <num> ; # pin number
# rdyled = <num> ; # pin number
# pgmled = <num> ; # pin number
# vfyled = <num> ; # pin number
# ;
#
# part
# id = <id> ; # quoted string
# desc = <description> ; # quoted string
# chip_erase_delay = <num> ; # micro-seconds
# eeprom
# banked = <yes/no> ; # yes / no
# size = <num> ; # bytes
# bank_size = <num> ; # bytes
# num_banks = <num> ; # numeric
# min_write_delay = <num> ; # micro-seconds
# max_write_delay = <num> ; # micro-seconds
# readback_p1 = <num> ; # byte value
# readback_p2 = <num> ; # byte value
# ;
# flash
# banked = <yes/no> ; # yes / no
# size = <num> ; # bytes
# bank_size = <num> ; # bytes
# num_banks = <num> ; # numeric
# min_write_delay = <num> ; # micro-seconds
# max_write_delay = <num> ; # micro-seconds
# readback_p1 = <num> ; # byte value
# readback_p2 = <num> ; # byte value
# ;
# ;
#
# If any of the above parameters is not specified, the default value of
# 0 is used for numerics or the empty string ("") for string values.
# If a required parameter is left empty, AVRPROG will complain.
#
# See below for some examples.
#
programmer
id = "bsd", "default";
desc = "Brian Dean's Programmer";
vcc = 2, 3, 4, 5;
reset = 7;
sck = 8;
mosi = 9;
miso = 10;
;
programmer
id = "dt006";
desc = "Dontronics DT006";
reset = 4;
sck = 8;
mosi = 9;
miso = 10;
;
programmer
id = "alf";
desc = "Tony Friebel's Programmer";
vcc = 2, 3, 4, 5;
buff = 6;
reset = 7;
sck = 8;
mosi = 9;
miso = 10;
errled = 1;
rdyled = 14;
pgmled = 16;
vfyled = 17;
;
part
id = "1200";
desc = "AT90S1200";
chip_erase_delay = 20000;
eeprom
banked = no;
size = 64;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
;
flash
banked = no;
size = 1024;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
;
;
part
id = "2313";
desc = "AT90S2313";
chip_erase_delay = 20000;
eeprom
banked = no;
size = 128;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
;
flash
banked = no;
size = 2048;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x7f;
readback_p2 = 0x00;
;
;
part
id = "2333";
desc = "AT90S2333";
chip_erase_delay = 20000;
eeprom
banked = no;
size = 128;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
;
flash
banked = no;
size = 2048;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
;
;
part
id = "4433";
desc = "AT90S4433";
chip_erase_delay = 20000;
eeprom
banked = no;
size = 256;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
;
flash
banked = no;
size = 4096;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
;
;
part
id = "4434";
desc = "AT90S4434";
chip_erase_delay = 20000;
eeprom
banked = no;
size = 256;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
;
flash
banked = no;
size = 4096;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
;
;
part
id = "8515";
desc = "AT90S8515";
chip_erase_delay = 20000;
eeprom
banked = no;
size = 512;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x80;
readback_p2 = 0x7f;
;
flash
banked = no;
size = 8192;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x7f;
readback_p2 = 0x00;
;
;
part
id = "8535";
desc = "AT90S8535";
chip_erase_delay = 20000;
eeprom
banked = no;
size = 512;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0x00;
readback_p2 = 0xff;
;
flash
banked = no;
size = 8192;
bank_size = 0;
num_banks = 0;
min_write_delay = 9000;
max_write_delay = 20000;
readback_p1 = 0xff;
readback_p2 = 0x00;
;
;
part
id = "103";
desc = "ATMEGA103";
chip_erase_delay = 112000;
eeprom
banked = no;
size = 4096;
bank_size = 0;
num_banks = 0;
min_write_delay = 4000;
max_write_delay = 9000;
readback_p1 = 0x00;
readback_p2 = 0xff;
;
flash
banked = yes;
size = 131072;
bank_size = 256;
num_banks = 512;
min_write_delay = 22000;
max_write_delay = 56000;
readback_p1 = 0xff;
readback_p2 = 0x00;
;
;