avrdude/usbtiny.h

69 lines
2.4 KiB
C

/*
* avrdude - A Downloader/Uploader for AVR device programmers
* Copyright (C) 2007 Limor Fried
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef usbtiny_h
#define usbtiny_h
// Generic requests to the USBtiny
#define USBTINY_ECHO 0 // echo test
#define USBTINY_READ 1 // read byte (wIndex:address)
#define USBTINY_WRITE 2 // write byte (wIndex:address, wValue:value)
#define USBTINY_CLR 3 // clear bit (wIndex:address, wValue:bitno)
#define USBTINY_SET 4 // set bit (wIndex:address, wValue:bitno)
// Programming requests
#define USBTINY_POWERUP 5 // apply power (wValue:SCK-period, wIndex:RESET)
#define USBTINY_POWERDOWN 6 // remove power from chip
#define USBTINY_SPI 7 // issue SPI command (wValue:c1c0, wIndex:c3c2)
#define USBTINY_POLL_BYTES 8 // set poll bytes for write (wValue:p1p2)
#define USBTINY_FLASH_READ 9 // read flash (wIndex:address)
#define USBTINY_FLASH_WRITE 10 // write flash (wIndex:address, wValue:timeout)
#define USBTINY_EEPROM_READ 11 // read eeprom (wIndex:address)
#define USBTINY_EEPROM_WRITE 12 // write eeprom (wIndex:address, wValue:timeout)
// Flags to indicate how to set RESET on power up
#define RESET_LOW 0
#define RESET_HIGH 1
// The SCK speed can be set by avrdude, to allow programming of slow-clocked parts
#define SCK_MIN 1 // usec delay (target clock >= 4 MHz)
#define SCK_MAX 250 // usec (target clock >= 16 kHz)
#define SCK_DEFAULT 10 // usec (target clock >= 0.4 MHz)
// How much data, max, do we want to send in one USB packet?
#define CHUNK_SIZE 128 // must be power of 2 less than 256
// The default USB Timeout
#define USB_TIMEOUT 500 // msec
#ifdef __cplusplus
extern "C" {
#endif
extern const char usbtiny_desc[];
void usbtiny_initpgm (PROGRAMMER * pgm);
#ifdef __cplusplus
}
#endif
#endif /* usbtiny_h */