776 lines
18 KiB
C
776 lines
18 KiB
C
/*
|
|
* avrdude - A Downloader/Uploader for AVR device programmers
|
|
* Copyright (C) 2003-2004 Theodore A. Roth <troth@openavr.org>
|
|
* Copyright 2007 Joerg Wunsch <j@uriah.heep.sax.de>
|
|
* Copyright 2008 Klaus Leidinger <klaus@mikrocontroller-projekte.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* $Id$ */
|
|
|
|
/*
|
|
* avrdude interface for Atmel Low Cost Serial programmers which adher to the
|
|
* protocol described in application note avr910.
|
|
*/
|
|
|
|
#include "ac_cfg.h"
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <errno.h>
|
|
#include <ctype.h>
|
|
#include <sys/time.h>
|
|
#include <unistd.h>
|
|
|
|
#include "avrdude.h"
|
|
#include "libavrdude.h"
|
|
|
|
#include "avr910.h"
|
|
|
|
/*
|
|
* Private data for this programmer.
|
|
*/
|
|
struct pdata
|
|
{
|
|
char has_auto_incr_addr;
|
|
unsigned char devcode;
|
|
unsigned int buffersize;
|
|
unsigned char test_blockmode;
|
|
unsigned char use_blockmode;
|
|
};
|
|
|
|
#define PDATA(pgm) ((struct pdata *)(pgm->cookie))
|
|
|
|
static void avr910_setup(PROGRAMMER * pgm)
|
|
{
|
|
if ((pgm->cookie = malloc(sizeof(struct pdata))) == 0) {
|
|
avrdude_message(MSG_INFO, "%s: avr910_setup(): Out of memory allocating private data\n",
|
|
progname);
|
|
exit(1);
|
|
}
|
|
memset(pgm->cookie, 0, sizeof(struct pdata));
|
|
PDATA(pgm)->test_blockmode = 1;
|
|
}
|
|
|
|
static void avr910_teardown(PROGRAMMER * pgm)
|
|
{
|
|
free(pgm->cookie);
|
|
}
|
|
|
|
|
|
static int avr910_send(PROGRAMMER * pgm, char * buf, size_t len)
|
|
{
|
|
return serial_send(&pgm->fd, (unsigned char *)buf, len);
|
|
}
|
|
|
|
|
|
static int avr910_recv(PROGRAMMER * pgm, char * buf, size_t len)
|
|
{
|
|
int rv;
|
|
|
|
rv = serial_recv(&pgm->fd, (unsigned char *)buf, len);
|
|
if (rv < 0) {
|
|
avrdude_message(MSG_INFO, "%s: avr910_recv(): programmer is not responding\n",
|
|
progname);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int avr910_drain(PROGRAMMER * pgm, int display)
|
|
{
|
|
return serial_drain(&pgm->fd, display);
|
|
}
|
|
|
|
|
|
static int avr910_vfy_cmd_sent(PROGRAMMER * pgm, char * errmsg)
|
|
{
|
|
char c;
|
|
|
|
avr910_recv(pgm, &c, 1);
|
|
if (c != '\r') {
|
|
avrdude_message(MSG_INFO, "%s: error: programmer did not respond to command: %s\n",
|
|
progname, errmsg);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* issue the 'chip erase' command to the AVR device
|
|
*/
|
|
static int avr910_chip_erase(PROGRAMMER * pgm, AVRPART * p)
|
|
{
|
|
avr910_send(pgm, "e", 1);
|
|
if (avr910_vfy_cmd_sent(pgm, "chip erase") < 0)
|
|
return -1;
|
|
|
|
/*
|
|
* avr910 firmware may not delay long enough
|
|
*/
|
|
usleep (p->chip_erase_delay);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int avr910_enter_prog_mode(PROGRAMMER * pgm)
|
|
{
|
|
avr910_send(pgm, "P", 1);
|
|
return avr910_vfy_cmd_sent(pgm, "enter prog mode");
|
|
}
|
|
|
|
|
|
static int avr910_leave_prog_mode(PROGRAMMER * pgm)
|
|
{
|
|
avr910_send(pgm, "L", 1);
|
|
return avr910_vfy_cmd_sent(pgm, "leave prog mode");
|
|
}
|
|
|
|
|
|
/*
|
|
* issue the 'program enable' command to the AVR device
|
|
*/
|
|
static int avr910_program_enable(PROGRAMMER * pgm, AVRPART * p)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
|
|
/*
|
|
* initialize the AVR device and prepare it to accept commands
|
|
*/
|
|
static int avr910_initialize(PROGRAMMER * pgm, AVRPART * p)
|
|
{
|
|
char id[8];
|
|
char sw[2];
|
|
char hw[2];
|
|
char buf[10];
|
|
char type;
|
|
char c;
|
|
AVRPART * part;
|
|
|
|
/* Get the programmer identifier. Programmer returns exactly 7 chars
|
|
_without_ the null.*/
|
|
|
|
avr910_send(pgm, "S", 1);
|
|
memset (id, 0, sizeof(id));
|
|
avr910_recv(pgm, id, sizeof(id)-1);
|
|
|
|
/* Get the HW and SW versions to see if the programmer is present. */
|
|
|
|
avr910_send(pgm, "V", 1);
|
|
avr910_recv(pgm, sw, sizeof(sw));
|
|
|
|
avr910_send(pgm, "v", 1);
|
|
avr910_recv(pgm, hw, sizeof(hw));
|
|
|
|
/* Get the programmer type (serial or parallel). Expect serial. */
|
|
|
|
avr910_send(pgm, "p", 1);
|
|
avr910_recv(pgm, &type, 1);
|
|
|
|
avrdude_message(MSG_INFO, "Found programmer: Id = \"%s\"; type = %c\n", id, type);
|
|
avrdude_message(MSG_INFO, " Software Version = %c.%c; ", sw[0], sw[1]);
|
|
avrdude_message(MSG_INFO, "Hardware Version = %c.%c\n", hw[0], hw[1]);
|
|
|
|
/* See if programmer supports autoincrement of address. */
|
|
|
|
avr910_send(pgm, "a", 1);
|
|
avr910_recv(pgm, &PDATA(pgm)->has_auto_incr_addr, 1);
|
|
if (PDATA(pgm)->has_auto_incr_addr == 'Y')
|
|
avrdude_message(MSG_INFO, "Programmer supports auto addr increment.\n");
|
|
|
|
/* Check support for buffered memory access, ignore if not available */
|
|
|
|
if (PDATA(pgm)->test_blockmode == 1) {
|
|
avr910_send(pgm, "b", 1);
|
|
avr910_recv(pgm, &c, 1);
|
|
if (c == 'Y') {
|
|
avr910_recv(pgm, &c, 1);
|
|
PDATA(pgm)->buffersize = (unsigned int)(unsigned char)c<<8;
|
|
avr910_recv(pgm, &c, 1);
|
|
PDATA(pgm)->buffersize += (unsigned int)(unsigned char)c;
|
|
avrdude_message(MSG_INFO, "Programmer supports buffered memory access with "
|
|
"buffersize = %u bytes.\n",
|
|
PDATA(pgm)->buffersize);
|
|
PDATA(pgm)->use_blockmode = 1;
|
|
} else {
|
|
PDATA(pgm)->use_blockmode = 0;
|
|
}
|
|
} else {
|
|
PDATA(pgm)->use_blockmode = 0;
|
|
}
|
|
|
|
if (PDATA(pgm)->devcode == 0) {
|
|
char devtype_1st;
|
|
int dev_supported = 0;
|
|
|
|
/* Get list of devices that the programmer supports. */
|
|
|
|
avr910_send(pgm, "t", 1);
|
|
avrdude_message(MSG_INFO, "\nProgrammer supports the following devices:\n");
|
|
devtype_1st = 0;
|
|
while (1) {
|
|
avr910_recv(pgm, &c, 1);
|
|
if (devtype_1st == 0)
|
|
devtype_1st = c;
|
|
if (c == 0)
|
|
break;
|
|
part = locate_part_by_avr910_devcode(part_list, c);
|
|
|
|
avrdude_message(MSG_INFO, " Device code: 0x%02x = %s\n", c, part ? part->desc : "(unknown)");
|
|
|
|
/* FIXME: Need to lookup devcode and report the device. */
|
|
|
|
if (p->avr910_devcode == c)
|
|
dev_supported = 1;
|
|
};
|
|
avrdude_message(MSG_INFO, "\n");
|
|
|
|
if (!dev_supported) {
|
|
avrdude_message(MSG_INFO, "%s: %s: selected device is not supported by programmer: %s\n",
|
|
progname, ovsigck? "warning": "error", p->id);
|
|
if (!ovsigck)
|
|
return -1;
|
|
}
|
|
/* If the user forced the selection, use the first device
|
|
type that is supported by the programmer. */
|
|
buf[1] = ovsigck? devtype_1st: p->avr910_devcode;
|
|
} else {
|
|
/* devcode overridden by -x devcode= option */
|
|
buf[1] = (char)(PDATA(pgm)->devcode);
|
|
}
|
|
|
|
/* Tell the programmer which part we selected. */
|
|
buf[0] = 'T';
|
|
/* buf[1] has been set up above */
|
|
|
|
avr910_send(pgm, buf, 2);
|
|
avr910_vfy_cmd_sent(pgm, "select device");
|
|
|
|
avrdude_message(MSG_NOTICE, "%s: avr910_devcode selected: 0x%02x\n",
|
|
progname, (unsigned)buf[1]);
|
|
|
|
avr910_enter_prog_mode(pgm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void avr910_disable(PROGRAMMER * pgm)
|
|
{
|
|
/* Do nothing. */
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
static void avr910_enable(PROGRAMMER * pgm)
|
|
{
|
|
/* Do nothing. */
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
* transmit an AVR device command and return the results; 'cmd' and
|
|
* 'res' must point to at least a 4 byte data buffer
|
|
*/
|
|
static int avr910_cmd(PROGRAMMER * pgm, const unsigned char *cmd,
|
|
unsigned char *res)
|
|
{
|
|
char buf[5];
|
|
|
|
/* FIXME: Insert version check here */
|
|
|
|
buf[0] = '.'; /* New Universal Command */
|
|
buf[1] = cmd[0];
|
|
buf[2] = cmd[1];
|
|
buf[3] = cmd[2];
|
|
buf[4] = cmd[3];
|
|
|
|
avr910_send (pgm, buf, 5);
|
|
avr910_recv (pgm, buf, 2);
|
|
|
|
res[0] = 0x00; /* Dummy value */
|
|
res[1] = cmd[0];
|
|
res[2] = cmd[1];
|
|
res[3] = buf[0];
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int avr910_parseextparms(PROGRAMMER * pgm, LISTID extparms)
|
|
{
|
|
LNODEID ln;
|
|
const char *extended_param;
|
|
int rv = 0;
|
|
|
|
for (ln = lfirst(extparms); ln; ln = lnext(ln)) {
|
|
extended_param = ldata(ln);
|
|
|
|
if (strncmp(extended_param, "devcode=", strlen("devcode=")) == 0) {
|
|
int devcode;
|
|
if (sscanf(extended_param, "devcode=%i", &devcode) != 1 ||
|
|
devcode <= 0 || devcode > 255) {
|
|
avrdude_message(MSG_INFO, "%s: avr910_parseextparms(): invalid devcode '%s'\n",
|
|
progname, extended_param);
|
|
rv = -1;
|
|
continue;
|
|
}
|
|
avrdude_message(MSG_NOTICE2, "%s: avr910_parseextparms(): devcode overwritten as 0x%02x\n",
|
|
progname, devcode);
|
|
PDATA(pgm)->devcode = devcode;
|
|
|
|
continue;
|
|
}
|
|
if (strncmp(extended_param, "no_blockmode", strlen("no_blockmode")) == 0) {
|
|
avrdude_message(MSG_NOTICE2, "%s: avr910_parseextparms(-x): no testing for Blockmode\n",
|
|
progname);
|
|
PDATA(pgm)->test_blockmode = 0;
|
|
|
|
continue;
|
|
}
|
|
|
|
avrdude_message(MSG_INFO, "%s: avr910_parseextparms(): invalid extended parameter '%s'\n",
|
|
progname, extended_param);
|
|
rv = -1;
|
|
}
|
|
|
|
return rv;
|
|
}
|
|
|
|
|
|
static int avr910_open(PROGRAMMER * pgm, char * port)
|
|
{
|
|
union pinfo pinfo;
|
|
/*
|
|
* If baudrate was not specified use 19.200 Baud
|
|
*/
|
|
if(pgm->baudrate == 0) {
|
|
pgm->baudrate = 19200;
|
|
}
|
|
|
|
strcpy(pgm->port, port);
|
|
pinfo.serialinfo.baud = pgm->baudrate;
|
|
pinfo.serialinfo.cflags = SERIAL_8N1;
|
|
if (serial_open(port, pinfo, &pgm->fd)==-1) {
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* drain any extraneous input
|
|
*/
|
|
avr910_drain (pgm, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void avr910_close(PROGRAMMER * pgm)
|
|
{
|
|
avr910_leave_prog_mode(pgm);
|
|
|
|
serial_close(&pgm->fd);
|
|
pgm->fd.ifd = -1;
|
|
}
|
|
|
|
|
|
static void avr910_display(PROGRAMMER * pgm, const char * p)
|
|
{
|
|
return;
|
|
}
|
|
|
|
|
|
static void avr910_set_addr(PROGRAMMER * pgm, unsigned long addr)
|
|
{
|
|
char cmd[3];
|
|
|
|
cmd[0] = 'A';
|
|
cmd[1] = (addr >> 8) & 0xff;
|
|
cmd[2] = addr & 0xff;
|
|
|
|
avr910_send(pgm, cmd, sizeof(cmd));
|
|
avr910_vfy_cmd_sent(pgm, "set addr");
|
|
}
|
|
|
|
|
|
static int avr910_write_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
unsigned long addr, unsigned char value)
|
|
{
|
|
char cmd[2];
|
|
|
|
if (strcmp(m->desc, "flash") == 0) {
|
|
if (addr & 0x01) {
|
|
cmd[0] = 'C'; /* Write Program Mem high byte */
|
|
}
|
|
else {
|
|
cmd[0] = 'c';
|
|
}
|
|
|
|
addr >>= 1;
|
|
}
|
|
else if (strcmp(m->desc, "eeprom") == 0) {
|
|
cmd[0] = 'D';
|
|
}
|
|
else {
|
|
return avr_write_byte_default(pgm, p, m, addr, value);
|
|
}
|
|
|
|
cmd[1] = value;
|
|
|
|
avr910_set_addr(pgm, addr);
|
|
|
|
avr910_send(pgm, cmd, sizeof(cmd));
|
|
avr910_vfy_cmd_sent(pgm, "write byte");
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int avr910_read_byte_flash(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
unsigned long addr, unsigned char * value)
|
|
{
|
|
char buf[2];
|
|
|
|
avr910_set_addr(pgm, addr >> 1);
|
|
|
|
avr910_send(pgm, "R", 1);
|
|
|
|
/* Read back the program mem word (MSB first) */
|
|
avr910_recv(pgm, buf, sizeof(buf));
|
|
|
|
if ((addr & 0x01) == 0) {
|
|
*value = buf[1];
|
|
}
|
|
else {
|
|
*value = buf[0];
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int avr910_read_byte_eeprom(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
unsigned long addr, unsigned char * value)
|
|
{
|
|
avr910_set_addr(pgm, addr);
|
|
avr910_send(pgm, "d", 1);
|
|
avr910_recv(pgm, (char *)value, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int avr910_read_byte(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
unsigned long addr, unsigned char * value)
|
|
{
|
|
if (strcmp(m->desc, "flash") == 0) {
|
|
return avr910_read_byte_flash(pgm, p, m, addr, value);
|
|
}
|
|
|
|
if (strcmp(m->desc, "eeprom") == 0) {
|
|
return avr910_read_byte_eeprom(pgm, p, m, addr, value);
|
|
}
|
|
|
|
return avr_read_byte_default(pgm, p, m, addr, value);
|
|
}
|
|
|
|
|
|
static int avr910_paged_write_flash(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
unsigned int page_size,
|
|
unsigned int addr, unsigned int n_bytes)
|
|
{
|
|
unsigned char cmd[] = {'c', 'C'};
|
|
char buf[2];
|
|
unsigned int max_addr = addr + n_bytes;
|
|
unsigned int page_addr;
|
|
int page_bytes = page_size;
|
|
int page_wr_cmd_pending = 0;
|
|
|
|
page_addr = addr;
|
|
avr910_set_addr(pgm, addr>>1);
|
|
|
|
while (addr < max_addr) {
|
|
page_wr_cmd_pending = 1;
|
|
buf[0] = cmd[addr & 0x01];
|
|
buf[1] = m->buf[addr];
|
|
avr910_send(pgm, buf, sizeof(buf));
|
|
avr910_vfy_cmd_sent(pgm, "write byte");
|
|
|
|
addr++;
|
|
page_bytes--;
|
|
|
|
if (m->paged && (page_bytes == 0)) {
|
|
/* Send the "Issue Page Write" if we have sent a whole page. */
|
|
|
|
avr910_set_addr(pgm, page_addr>>1);
|
|
avr910_send(pgm, "m", 1);
|
|
avr910_vfy_cmd_sent(pgm, "flush page");
|
|
|
|
page_wr_cmd_pending = 0;
|
|
usleep(m->max_write_delay);
|
|
avr910_set_addr(pgm, addr>>1);
|
|
|
|
/* Set page address for next page. */
|
|
|
|
page_addr = addr;
|
|
page_bytes = page_size;
|
|
}
|
|
else if ((PDATA(pgm)->has_auto_incr_addr != 'Y') && ((addr & 0x01) == 0)) {
|
|
avr910_set_addr(pgm, addr>>1);
|
|
}
|
|
}
|
|
|
|
/* If we didn't send the page wr cmd after the last byte written in the
|
|
loop, send it now. */
|
|
|
|
if (page_wr_cmd_pending) {
|
|
avr910_set_addr(pgm, page_addr>>1);
|
|
avr910_send(pgm, "m", 1);
|
|
avr910_vfy_cmd_sent(pgm, "flush final page");
|
|
usleep(m->max_write_delay);
|
|
}
|
|
|
|
return addr;
|
|
}
|
|
|
|
|
|
static int avr910_paged_write_eeprom(PROGRAMMER * pgm, AVRPART * p,
|
|
AVRMEM * m,
|
|
unsigned int page_size,
|
|
unsigned int addr, unsigned int n_bytes)
|
|
{
|
|
char cmd[2];
|
|
unsigned int max_addr = addr + n_bytes;
|
|
|
|
avr910_set_addr(pgm, addr);
|
|
|
|
cmd[0] = 'D';
|
|
|
|
while (addr < max_addr) {
|
|
cmd[1] = m->buf[addr];
|
|
avr910_send(pgm, cmd, sizeof(cmd));
|
|
avr910_vfy_cmd_sent(pgm, "write byte");
|
|
usleep(m->max_write_delay);
|
|
|
|
addr++;
|
|
|
|
if (PDATA(pgm)->has_auto_incr_addr != 'Y') {
|
|
avr910_set_addr(pgm, addr);
|
|
}
|
|
}
|
|
|
|
return addr;
|
|
}
|
|
|
|
|
|
static int avr910_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
unsigned int page_size,
|
|
unsigned int addr, unsigned int n_bytes)
|
|
{
|
|
int rval = 0;
|
|
if (PDATA(pgm)->use_blockmode == 0) {
|
|
if (strcmp(m->desc, "flash") == 0) {
|
|
rval = avr910_paged_write_flash(pgm, p, m, page_size, addr, n_bytes);
|
|
} else if (strcmp(m->desc, "eeprom") == 0) {
|
|
rval = avr910_paged_write_eeprom(pgm, p, m, page_size, addr, n_bytes);
|
|
} else {
|
|
rval = -2;
|
|
}
|
|
}
|
|
|
|
if (PDATA(pgm)->use_blockmode == 1) {
|
|
unsigned int max_addr = addr + n_bytes;
|
|
char *cmd;
|
|
unsigned int blocksize = PDATA(pgm)->buffersize;
|
|
int wr_size;
|
|
|
|
if (strcmp(m->desc, "flash") && strcmp(m->desc, "eeprom"))
|
|
return -2;
|
|
|
|
if (m->desc[0] == 'e') {
|
|
blocksize = 1; /* Write to eeprom single bytes only */
|
|
wr_size = 1;
|
|
} else {
|
|
wr_size = 2;
|
|
}
|
|
|
|
avr910_set_addr(pgm, addr / wr_size);
|
|
|
|
cmd = malloc(4 + blocksize);
|
|
if (!cmd) return -1;
|
|
|
|
cmd[0] = 'B';
|
|
cmd[3] = toupper((int)(m->desc[0]));
|
|
|
|
while (addr < max_addr) {
|
|
if ((max_addr - addr) < blocksize) {
|
|
blocksize = max_addr - addr;
|
|
};
|
|
memcpy(&cmd[4], &m->buf[addr], blocksize);
|
|
cmd[1] = (blocksize >> 8) & 0xff;
|
|
cmd[2] = blocksize & 0xff;
|
|
|
|
avr910_send(pgm, cmd, 4 + blocksize);
|
|
avr910_vfy_cmd_sent(pgm, "write block");
|
|
|
|
addr += blocksize;
|
|
} /* while */
|
|
free(cmd);
|
|
|
|
rval = addr;
|
|
}
|
|
return rval;
|
|
}
|
|
|
|
|
|
static int avr910_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
|
|
unsigned int page_size,
|
|
unsigned int addr, unsigned int n_bytes)
|
|
{
|
|
char cmd[4];
|
|
int rd_size;
|
|
unsigned int max_addr;
|
|
char buf[2];
|
|
int rval=0;
|
|
|
|
max_addr = addr + n_bytes;
|
|
|
|
if (strcmp(m->desc, "flash") == 0) {
|
|
cmd[0] = 'R';
|
|
rd_size = 2; /* read two bytes per addr */
|
|
} else if (strcmp(m->desc, "eeprom") == 0) {
|
|
cmd[0] = 'd';
|
|
rd_size = 1;
|
|
} else {
|
|
return -2;
|
|
}
|
|
|
|
if (PDATA(pgm)->use_blockmode) {
|
|
/* use buffered mode */
|
|
int blocksize = PDATA(pgm)->buffersize;
|
|
|
|
cmd[0] = 'g';
|
|
cmd[3] = toupper((int)(m->desc[0]));
|
|
|
|
avr910_set_addr(pgm, addr / rd_size);
|
|
|
|
while (addr < max_addr) {
|
|
if ((max_addr - addr) < blocksize) {
|
|
blocksize = max_addr - addr;
|
|
}
|
|
cmd[1] = (blocksize >> 8) & 0xff;
|
|
cmd[2] = blocksize & 0xff;
|
|
|
|
avr910_send(pgm, cmd, 4);
|
|
avr910_recv(pgm, (char *)&m->buf[addr], blocksize);
|
|
|
|
addr += blocksize;
|
|
}
|
|
|
|
rval = addr;
|
|
} else {
|
|
|
|
avr910_set_addr(pgm, addr / rd_size);
|
|
|
|
while (addr < max_addr) {
|
|
avr910_send(pgm, cmd, 1);
|
|
if (rd_size == 2) {
|
|
/* The 'R' command returns two bytes, MSB first, we need to put the data
|
|
into the memory buffer LSB first. */
|
|
avr910_recv(pgm, buf, 2);
|
|
m->buf[addr] = buf[1]; /* LSB */
|
|
m->buf[addr + 1] = buf[0]; /* MSB */
|
|
}
|
|
else {
|
|
avr910_recv(pgm, (char *)&m->buf[addr], 1);
|
|
}
|
|
|
|
addr += rd_size;
|
|
|
|
if (PDATA(pgm)->has_auto_incr_addr != 'Y') {
|
|
avr910_set_addr(pgm, addr / rd_size);
|
|
}
|
|
}
|
|
|
|
rval = addr;
|
|
}
|
|
|
|
return rval;
|
|
}
|
|
|
|
/* Signature byte reads are always 3 bytes. */
|
|
|
|
static int avr910_read_sig_bytes(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m)
|
|
{
|
|
unsigned char tmp;
|
|
|
|
if (m->size < 3) {
|
|
avrdude_message(MSG_INFO, "%s: memsize too small for sig byte read", progname);
|
|
return -1;
|
|
}
|
|
|
|
avr910_send(pgm, "s", 1);
|
|
avr910_recv(pgm, (char *)m->buf, 3);
|
|
/* Returned signature has wrong order. */
|
|
tmp = m->buf[2];
|
|
m->buf[2] = m->buf[0];
|
|
m->buf[0] = tmp;
|
|
|
|
return 3;
|
|
}
|
|
|
|
const char avr910_desc[] = "Serial programmers using protocol described in application note AVR910";
|
|
|
|
void avr910_initpgm(PROGRAMMER * pgm)
|
|
{
|
|
strcpy(pgm->type, "avr910");
|
|
|
|
/*
|
|
* mandatory functions
|
|
*/
|
|
pgm->initialize = avr910_initialize;
|
|
pgm->display = avr910_display;
|
|
pgm->enable = avr910_enable;
|
|
pgm->disable = avr910_disable;
|
|
pgm->program_enable = avr910_program_enable;
|
|
pgm->chip_erase = avr910_chip_erase;
|
|
pgm->cmd = avr910_cmd;
|
|
pgm->open = avr910_open;
|
|
pgm->close = avr910_close;
|
|
|
|
/*
|
|
* optional functions
|
|
*/
|
|
|
|
pgm->write_byte = avr910_write_byte;
|
|
pgm->read_byte = avr910_read_byte;
|
|
|
|
pgm->paged_write = avr910_paged_write;
|
|
pgm->paged_load = avr910_paged_load;
|
|
|
|
pgm->read_sig_bytes = avr910_read_sig_bytes;
|
|
|
|
pgm->parseextparams = avr910_parseextparms;
|
|
pgm->setup = avr910_setup;
|
|
pgm->teardown = avr910_teardown;
|
|
}
|