69 lines
2.4 KiB
C
69 lines
2.4 KiB
C
/*
|
|
* avrdude - A Downloader/Uploader for AVR device programmers
|
|
* Copyright (C) 2007 Limor Fried
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
|
|
#ifndef usbtiny_h
|
|
#define usbtiny_h
|
|
|
|
// Generic requests to the USBtiny
|
|
#define USBTINY_ECHO 0 // echo test
|
|
#define USBTINY_READ 1 // read byte (wIndex:address)
|
|
#define USBTINY_WRITE 2 // write byte (wIndex:address, wValue:value)
|
|
#define USBTINY_CLR 3 // clear bit (wIndex:address, wValue:bitno)
|
|
#define USBTINY_SET 4 // set bit (wIndex:address, wValue:bitno)
|
|
|
|
// Programming requests
|
|
#define USBTINY_POWERUP 5 // apply power (wValue:SCK-period, wIndex:RESET)
|
|
#define USBTINY_POWERDOWN 6 // remove power from chip
|
|
#define USBTINY_SPI 7 // issue SPI command (wValue:c1c0, wIndex:c3c2)
|
|
#define USBTINY_POLL_BYTES 8 // set poll bytes for write (wValue:p1p2)
|
|
#define USBTINY_FLASH_READ 9 // read flash (wIndex:address)
|
|
#define USBTINY_FLASH_WRITE 10 // write flash (wIndex:address, wValue:timeout)
|
|
#define USBTINY_EEPROM_READ 11 // read eeprom (wIndex:address)
|
|
#define USBTINY_EEPROM_WRITE 12 // write eeprom (wIndex:address, wValue:timeout)
|
|
|
|
|
|
|
|
// Flags to indicate how to set RESET on power up
|
|
#define RESET_LOW 0
|
|
#define RESET_HIGH 1
|
|
|
|
// The SCK speed can be set by avrdude, to allow programming of slow-clocked parts
|
|
#define SCK_MIN 1 // usec delay (target clock >= 4 MHz)
|
|
#define SCK_MAX 250 // usec (target clock >= 16 kHz)
|
|
#define SCK_DEFAULT 10 // usec (target clock >= 0.4 MHz)
|
|
|
|
// How much data, max, do we want to send in one USB packet?
|
|
#define CHUNK_SIZE 128 // must be power of 2 less than 256
|
|
|
|
// The default USB Timeout
|
|
#define USB_TIMEOUT 500 // msec
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
extern const char usbtiny_desc[];
|
|
void usbtiny_initpgm (PROGRAMMER * pgm);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* usbtiny_h */
|