avrdude/ChangeLog

377 lines
13 KiB
Plaintext

2011-09-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* main.c: Restrict the cyclecounter readout to those cases where
it has been explicitly requested (by -y or -Y), rather than always
attempting to read the last EEPROM bytes.
2011-09-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* stk500v2.c (stk600_xprog_paged_load, stk600_xprog_paged_write):
Fix regression in the AVRISPmkII/STK600 TPI handling introduced
by the USBasp's TPI implementation which added a pagesize even for
the minor memory regions of TPI devices. Also fix wrong offset
introduced by the memory tagging patch.
2011-09-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avr.c (avr_read, avr_write): Don't bail out on TPI parts if
their programmer doesn't provide a (low-level) cmd_tpi method;
instead, fall back to the normal programmer methods which are
supposed to handle the situation.
This fixes a regression where the recent bitbang-TPI implementation
broke TPI handling of STK600/AVRISPmkII.
2011-09-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Mega-commit to bring in memory tagging.
Each memory image byte is now tagged as it's being read from a file.
Only bytes read from a file will be written or verified (modulo page
granularity requirements).
* avrpart.h: Add memory tags.
* avrpart.c: Allocate and initialize tag area.
* update.h: Drop unused parameter "verify" from do_op().
* pgm.h: Add parameter base_addr to the paged_load and paged_write
methods, respectively.
* avr.h: New parameter to avr_read: second AVRPART to verify against.
* fileio.c: Track all memory regions that have been read from an
input file by tagging them.
* update.c: Call avr_read() with the new parameter list.
* main.c: Call avr_initmem() to initialize the memory regions, rather
than trying to duplicate an unitialized part, and then let the
original part rot away.
* avr.c: Implement the heart of the new featureset. For paged memory
areas, when writing or verifying, call the paged_write and paged_load
methods, respectively, once per page instead of on the entire memory.
When writing, only write bytes or pages that have content read from a
file. Whe verifying, only read memory bytes or pages where the
verification data have been read from a file. Only verify those bytes
that have been read from a file.
* avrftdi.c: Implement the new API for paged_load and paged_write,
respectively.
* jtagmkII.c: (Ditto.)
* butterfly.c: (Ditto.)
* jtagmkI.c: (Ditto.)
* avr910.c: (Ditto.)
* stk500.c: (Ditto.)
* usbasp.c: (Ditto.)
* stk500v2.c: (Ditto.)
* usbtiny.c: (Ditto.)
2011-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* stk500v2.c (stk500v2_command): Treat warnings as errors rather than
success.
2011-08-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #34027: avrdude AT90S1200 Problem (part 3 - documentation)
* avrdude.1: Document the programmer type restrictions for AT90S1200
devices.
* doc/avrdude.texi: (Ditto.)
2011-08-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #34027: avrdude AT90S1200 Problem (part 2 - stk500v2 and relatives)
* stk500v2.c (stk500v2_initialize): For the AT90S1200, release
/RESET for a moment before reinitializing, as this is required by
its programming protocol.
2011-08-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac: In AC_CHECK_LIB for libftdi, check for
ftdi_usb_get_strings() rathern than ftdi_init(), as this is a more
specific thing to search for in order to make sure getting a
recent enough libftdi.
2011-08-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #34027: avrdude AT90S1200 Problem (part 1 - bitbang
programmers)
* config_gram.y: Introduce new keyword "is_at90s1200".
* lexer.l: (Ditto.)
* avrdude.conf.in: Applew new keyword to the AT90S1200 device.
* avrpart.h: Introduce new flag AVRPART_IS_AT90S1200, reflecting
the is_at90s1200 configuration keyword.
* bitbang.c (bitbang_initialize): Replace existing test for
AT90S1200 by AVRPART_IS_AT90S1200
* avr.c (avr_write_byte_default): Avoid the pre-write reading for
the AT90S1200, as this appears to sometimes corrupt the high byte
by pre-programming the low byte just written into it.
2011-08-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac: Bump version for post-5.11.
2011-08-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac: Bump version for releasing AVRDUDE 5.11.
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.1: Update the list of supported AVR devices.
* doc/avrdude.texi: (Ditto).
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac: add -lusb as "other libraries" when checking
for libftdi.
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Juergen Weigert:
patch #7056: adding support for mikrokopter bootloader to butterfly
* butterfly.c: Add some specific logic to handle the
mikrokopter.de butterfly bootloader.
* butterfly.h: Add one related function declaration.
* config_gram.y: Add butterfly_mk keyword.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add entry for butterfly_mk.
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Stefan Tomanek:
patch #7542: add default_bitclock to configuration files
* config.c: Add the new keyword and its handling.
* config.h: (Ditto.)
* config_gram.y: (Ditto.)
* avrdude.conf.in: (Ditto.)
* main.c: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.1: Document the change.
* doc/avrdude.texi: (Ditto.)
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Brett Hagman:
patch #7603: wiring - programmer type for Wiring boards
(based on STK500v2)
* wiring.c: New file.
* wiring.h: (Ditto.)
* Makefile.am: Add new files.
* stk500v2_private.h: Reorganize so some functions and struct
pdata are globally known.
* stk500v2.c: (Ditto.)
* stk500v2.h: (Ditto.)
* lexer.l: Add new programmer keywords.
* config_gram.y: (Ditto.)
* avrdude.conf.in: Add "wiring" programmer entry.
* avrdude.1: Document the new programmer.
* doc/avrdude.texi: (Ditto.)
* AUTHORS: Add Brett Hagman.
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by an anonymous contributor on the mailinglist:
* avrdude.conf (jtagkey): Add a definition for the Amontec
JTAGKey
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Juergen Weigert:
bug #22720: avrdude-5.5 ignores buff settings in avrdude.conf
(Note that the actual bug the subject is about has been fixed
long ago.)
* update.c (do_op): fix a diagnostic message
* pgm.h: add exit_datahigh field
* par.c: set and act upon the exit_datahigh field
* avrdude.1: document the new -E options
* doc/avrdude.texi: (Ditto.)
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #33811: Parallel make fails
* Makefile.am (BUILT_SOURCES): Add this macro.
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #33114: Segfault after setting the DWEN fuse with Dragon
* jtagII.c (jtagmkII_getsync): Instead of exit()ing from
deep within the tree when detecting the "need debugWIRE"
situation, properly pass this up as a return code.
* jtagII_private.h (JTAGII_GETSYNC_FAIL_GRACEFUL): New constant.
* stk500v2.c (stk500v2_jtagmkII_open): Don't tell anything
anymore when receiving a JTAGII_GETSYNC_FAIL_GRACEFUL from
jtagmkII_getsync(); silently give up (all necessary has been
said already).
2011-08-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Reported by Jason Hecker:
* usbasp.c (libusb_to_errno): Conditionalize some error codes
that apparently are lacking on MinGW.
2011-08-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Fix warnings.
* ser_avrdoper.c: add <stdlib.h> so exit() is declared.
* usbtiny.c (usbtiny_open): provide an initializer to a
"may be used uninitialized" variable (since GCC could not
fully detect the logic behind).
2011-08-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac: Add a check for FreeBSD's libusb-1.0
compatible library that is found in libusb.a/.so on
FreeBSD 8+.
2011-08-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Doug Springer, based on work by
Wolfgang Moser, Ville Voipio, Hannes Weisbach
patch #7486: Patch to add FT2232C/D, FT2232H, FT4232H,
usbvid, usbpid, usbdev for USB support - Based on #7062
* avrftdi.c: New file.
* avrftdi.h: (Ditto.)
* configure.ac: Add check for libftdi.
* config_gram.y: Add AVRFTDI and per-programmer USB string
keywords.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add avrftdi and 2232HIO programmers.
* pgm.h: Add USB parameters.
* Makefile.am: Add avrftdi.c and avrftdi.h.
* AUTHORS: Mention the new authors.
* avrdude.1: Document the changes.
* doc/avrdude.texi: (Ditto.)
2011-08-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #29585: Fix license
* doc/avrdude.texi: Add FDL as an option to the licensing
statement, as the savannah administration would like it
that way.
2011-08-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Darell Tan:
patch #7244: TPI bitbang implementation
* bitbang.c: Add TPI bitbang stuff.
* bitbang.h: (Ditto.)
* avr.c: (Ditto.)
* avr.h: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* serbb_posix.c: Wire bitbang_cmd_tpi into the struct pgm.
* serbb_win32.c: (Ditto.)
* par.c: (Ditto.)
* doc/avrdude.texi: Document the TPI bitbang support.
2011-08-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Grygoriy Fuchedzhy:
bug #31779: Add support for addressing usbtinyisp with -P option
* usbtiny.c (usbtiny_open): Add logic to distinguish multiple USBtinyISP
programmers by their bus:device tuple.
* doc/avrdude.texi: Document the new functionality.
* avrdude.1: (Ditto.)
2011-08-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Timon Van Overveldt:
bug #30268: Debugwire broken in avrdude-5.10
* jtagmkII.c (jtagmkII_initialize): only try setting up a JTAG chain when
the programmer is using JTAG.
2011-08-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #29636: AVRDude issues invalid CMD_CHECK_TARGET_CONNECTION
on the AVRISP-MKII
* stk500v2.c (stk500v2_program_enable): Rewrite the logic to
explain ISP activation failures.
* stk500v2_private.h: Fix the various STATUS_* constants;
AVR069 and AVR079 disagreed in their values, even though they
are apparently implementing the same logic behind.
2011-08-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #29650: Programming timeouts in ATmega128RFA1 are too slow
* avrdude.conf.in (ATmega128RFA1): Bump write delay values for flash and
EEPROM to 50 ms.
2011-08-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.conf.in (ATmega8515, ATmega8535, ATmega48, ATmega88, ATmega88P,
ATtiny88, ATmega168, ATmega168P, ATmega328P): Bump delay value for STK500v2
EEPROM write operation to 5, according to the respective XML files.
2011-08-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Darcy Houlahan:
bug #29694: error in avrdude.conf for attiny84 eeprom
* avrdude.conf.in (ATtiny84, ATtiny85): fix A7 bit in EEPROM write
command.
2011-08-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Durant Gilles:
* avrdude.conf.in (ATtiny4313): Fix flash addressing bits for manual ISP
algorithm.
2011-08-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Philip:
bug #31386: A "BUILD.svn" or similar "how to get started" doc would be helpful
* BUILD-FROM-SVN: New file.
2011-08-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Nic Jones:
bug #32539: [Documentation][Patch] Man page is misleading
re: Dragon & PDI
* doc/avrdude.texi: Update information about PDI connections
on AVR Dragon
2011-08-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* usbasp.c: Add <stdint.h> so this actually compiles
again.
2011-08-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Contributed by tixiv@gmx.net:
bug #33345: File auto detection as binary doesn't open
file in binary mode on Windows
* fileio.c: Move the decision about opening files in
binary mode until before the fopen() call.
2011-06-16 Thomas Fischl <tfischl@gmx.de>
* avrdude.conf.in: Fix part id of ATtiny9.
2011-05-28 Thomas Fischl <tfischl@gmx.de>
Based on patch #7440 commited by Slawomir Fraś:
* usbasp.c: added TPI support for USBasp
* usbasp.h: (Ditto.)
2011-05-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.conf.in: Add support for ATmega168P.
2011-05-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.conf.in: Fix abbreviated name for ATmega324PA.
2011-05-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Lech Perczak:
bug #30946: Added support for ATmega8/16/32U2
* avrdude.conf.in: Add ATmega8/16/32U2 entries.
2011-05-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by David A Lyons:
patch #7393: Adding ATtiny4313 Device to avrdude.conf.in
* avrdude.conf.in: Add ATtiny4313 data.
2011-05-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* usb_libusb.c: Bump timeout values to allow for slow clock
speeds.
* jtagmkII.c: (Ditto.)
2011-03-04 Eric B. Weddington <eric.weddington@atmel.com>
Thanks to Vitaly Chernookiy for the patch.
* avrdude.conf.in: Add support for atmega324pa.
* ChangeLog-2010: New file, rotate ChangeLog for new year.