avrdude/ChangeLog

220 lines
6.7 KiB
Plaintext

2014-04-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.1: Remove the note that users might edit the system-wide
config file. This file will be overwritten by the next
installation, so it's not a good idea to manually modify it.
Using the -C +file option is a much better way for user
modifications.
* doc/avrdude.texi: (Dito.)
2014-03-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac (AC_INIT): Bump version for post-6.1.
2014-03-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac (AC_INIT): Bump version to 6.1.
2014-03-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* pgm.c (pgm_free): Cleanup police: destroy the p->usbpid
list when freeing the programmer struct.
2014-03-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #40782: Verify errors for object size > 16 k on x32e5 due
to typo in avrdude.conf
* avrdude.conf.in (ATmega8E5, ATmega32E5): fix boot location
2014-02-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.conf.in (atmelice, atmelice_pdi, atmelice_dw, atmelice_isp):
New entries.
* avrdude.1: Document the Atmel-ICE addition.
* doc/avrdude.texi: (Dito.)
* usbdevs.c (USB_DEVICE_ATMEL_ICE): New entry.
2014-02-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* main.c: Bump copyright year.
2014-02-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* jtag3.c (jtag3_recv): avoid memmov'ing more data than available
2014-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.1: Documentation update for EDBG.
* doc/avrdude.texi: (Dito.)
2014-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* jtag3.c: For EDBG protocol, always use 512-byte block I/O. The
lower layers will split this according to the EP's maxsize. This
makes it work over USB 1.1 connections (albeit very slowly, due to
the interrupt transfers used).
2014-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* config_gram.y: Turn the usbpid parameter of the programmer into
a list of PIDs. Make the JTAGICE3 programmer handle a list of
PIDs, by trying each of them in sequence. Use a single, central
jtag3_open_common() function to handle the common code of all
jtag3_open_* functions. Centralize all USB VID/PID definitions in
usbdevs.h.
* flip1.c: (Dito.)
* ft245r.c: (Dito.)
* stk500v2.c: (Dito.)
* jtag3.c: (Dito.)
* jtag3.h: (Dito.)
* flip2.c: (Dito.)
* usbdevs.h: (Dito.)
* pgm.c: (Dito.)
* serial.h: (Dito.)
* pgm.h: (Dito.)
* usbtiny.c: (Dito.)
* usbasp.c: (Dito.)
* avrftdi.c: (Dito.)
* usbtiny.h: (Dito.)
* avrdude.conf.in: (Dito.)
* usbasp.h: (Dito.)
* usb_libusb.c: (Dito.)
2014-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* usb_libusb.c (usbdev_open): Replace all calls to exit(1) by
return -1
2014-02-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* jtag3_private.h: Add EDBG/CMSIS-DAP specific constants.
* jtag3.c: Add EDBG/CMSIS-DAP protocol implementation.
* serial.h: (Dito.)
* usbdevs.h: (Dito.)
* usb_libusb.c: (Dito.)
* configure.ac: (Dito.)
* avrdude.conf.in: Add JTAGICE3 and XplainedPro entries using
EDBG.
* configure.ac: Bump version date.
2014-02-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* usb_libusb.c (usbdev_recv_frame): Fix a bug where a new recv
request was issued even though all desired data had aldready
been received.
2014-02-21 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* serial.h: Change the second parameter of the ser_open method
from "baud" into a "union pinfo", so the USB parameters can be
passed without hacks.
* arduino.c: (Dito.)
* avr910.c: (Dito.)
* buspirate.c: (Dito.)
* butterfly.c: (Dito.)
* jtag3.c: (Dito.)
* jtagmkI.c: (Dito.)
* jtagmkII.c: (Dito.)
* ser_avrdoper.c: (Dito.)
* ser_posix.c: (Dito.)
* ser_win32.c: (Dito.)
* stk500.c: (Dito.)
* stk500v2.c: (Dito.)
* usb_libusb.c: (Dito.)
* wiring.c: (Dito.)
2014-01-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
[bug #41402] dfu.c missing include <stdint.h>
* dfu.c: include <stdint.h> where uint16_t is defined
2014-01-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.conf.in (ATmega256RFR2 et al.): Fix EEPROM size.
2014-01-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
[bug #41357] OS X: Avrdude messes with the usb stack?
* usb_libusb.c (usbdev_close): Only issue the usb_reset() for
Linux systems, as these are the only ones that seem to require
it under some circumstances.
2014-01-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac (libelf): check against elf_getshdrstrndx() rather
than just elf_begin() only, so it is clear we found a sufficiently
recent libelf to work with.
2014-01-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Contributed by Alan Horstmann:
bug #40897: AT Mega2560 not correctly programmed with stk500(v1) ISP (solution patch)
* stk500.c: Implement extended address byte handling.
* avrdude.conf.in (ATmega2560): enable stk500_devcode so
STK500v1 protocol actually starts at all.
2014-01-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip1.c: Implement the meat of FLIP version 1 protocol.
* avrdude.1: Document the new protocol.
* doc/avrdude.texi: (Dito.)
2014-01-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip2.c (flip2_page_erase): Remove unimplemented function.
* dfu.h: Correctly conditionalize <usb.h> vs. <lusb0_usb.h>;
add adjustable timeout (struct dfu_dev); add dfu_abort()
* dfu.c (dfu_abort): New function; implement adjustable timeout.
2014-01-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac (libhid): Turn from AC_TRY_RUN into
AC_TRY_COMPILE, so it also works for cross-compilation
setups.
2014-01-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* dfu.c (dfu_init): Move the descriptor checks up into the
FLIP protocol implementation.
* flip2.c (flip2_initialize): (Dito.)
* flip1.c (flip1_initialize): (Dito.)
2014-01-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip2.c: Rename from flip.c
* flip2.h: Rename from flip.h
* Makefile.am: Reflect the renaming.
* dfu.c: Update information how to get GPL.
* dfu.h: (Dito.)
2014-01-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip.c (flip2_initialize): Check user is running on an Xmega
device.
2014-01-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip.c: Added some verbose-level messages (-vv)
* dfu.c: Added some verbose-level messages (-vvvv)
2014-01-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Kirill Levchenko:
patch #7896: DFU FLIPv2 programming support
* pgm_type.c: Add the flip2 programmer type.
* config_gram.y: Allow for the usbid keyword in a device definition.
* avrdude.conf.in: Add usbpid values to those Xmega devices where
applicable.
* avrpart.h: Add usbpid device field.
* dfu.c: (New file.)
* dfu.h: (New file.)
* flip.c: (New file.)
* flip.h: (New file.)
* Makefile.am: Add new files.
* doc/avrdude.texi: Document the changes.
* avrdude.1: (Dito.)
2014-01-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* ChangeLog-2013: Annual changelog rotation.