avrdude/src/avrdude.conf.in

16171 lines
522 KiB
Plaintext

# $Id$ -*- text -*-
#
# AVRDUDE Configuration File
#
# This file contains configuration data used by AVRDUDE which describes
# the programming hardware pinouts and also provides part definitions.
# AVRDUDE's "-C" command line option specifies the location of the
# configuration file. The "-c" option names the programmer configuration
# which must match one of the entry's "id" parameter. The "-p" option
# identifies which part AVRDUDE is going to be programming and must match
# one of the parts' "id" parameter.
#
# DO NOT MODIFY THIS FILE. Modifications will be overwritten the next
# time a "make install" is run. For user-specific additions, use the
# "-C +filename" command line option.
#
# Possible entry formats are:
#
# programmer
# parent <id> # optional parent
# id = <id1> [, <id2> ... ] ; # <idN> are quoted strings
# desc = <description> ; # quoted string
# type = <type>; # programmer type, quoted string
# # supported types can be listed by "-c ?type"
# prog_modes = PM_<i/f> {| PM_<i/f>} # interfaces, eg, PM_SPM|PM_PDI (1)
# connection_type = parallel | serial | usb | spi
# baudrate = <num> ; # baudrate for avr910-programmer
# vcc = <pin1> [, <pin2> ... ] ; # pin number(s)
# buff = <pin1> [, <pin2> ... ] ; # pin number(s)
# reset = <pin> ; # pin number
# sck = <pin> ; # pin number
# mosi = <pin> ; # pin number
# miso = <pin> ; # pin number
# errled = <pin> ; # pin number
# rdyled = <pin> ; # pin number
# pgmled = <pin> ; # pin number
# vfyled = <pin> ; # pin number
# usbvid = <hexnum> ; # USB VID (Vendor ID)
# usbpid = <hexnum> [, <hexnum> ...] ; # USB PID (Product ID) (2)
# usbdev = <interface> ; # USB interface or other device info
# usbvendor = <vendorname> ; # USB Vendor Name
# usbproduct = <productname> ; # USB Product Name
# usbsn = <serialno> ; # USB Serial Number
# hvupdi_support = <num> [, <num>, ... ] ; # UPDI HV Variants Support
# ;
#
# # To invert a pin use = ~ <num>
# # To invert a pin list (all pins get inverted) use ~ ( <num1> [, <num2> ... ] )
# #
# # (1) The following program modes are known:
# # - PM_SPM: Bootloaders, self-programming with SPM opcodes or NVM Controllers
# # - PM_TPI: Tiny Programming Interface (t4, t5, t9, t10, t20, t40, t102, t104)
# # - PM_ISP: SPI programming for In-System Programming (almost all classic parts)
# # - PM_PDI: Program and Debug Interface (xmega parts)
# # - PM_UPDI: Unified Program and Debug Interface
# # - PM_HVSP: High Voltage Serial Programming (some classic parts)
# # - PM_HVPP: High Voltage Parallel Programming (most non-HVSP classic parts)
# # - PM_debugWIRE: Simpler alternative to JTAG (a subset of HVPP/HVSP parts)
# # - PM_JTAG: Joint Test Action Group standard (some classic parts)
# # - PM_JTAGmkI: Subset of PM_JTAG, older parts, Atmel ICE mkI
# # - PM_XMEGAJTAG: JTAG, some XMEGA parts
# # - PM_AVR32JTAG: JTAG for 32-bit AVRs
# # - PM_aWire: AVR32 parts
# #
# # (2) Not all programmer types can process a list of PIDs
#
# part
# desc = <description> ; # quoted string
# id = <id> ; # quoted string
# family_id = <id> ; # quoted string, eg, "megaAVR" or "tinyAVR"
# prog_modes = PM_<i/f> {| PM_<i/f>} # interfaces, eg, PM_SPM|PM_ISP|PM_HVPP|PM_debugWIRE
# mcuid = <num>; # unique id in 0..2039 for 8-bit AVRs
# n_interrupts = <num>; # number of interrupts, used for vector bootloaders
# n_page_erase = <num>; # if set, number of pages erased during NVM erase
# hvupdi_variant = <num> ; # numeric -1 (n/a) or 0..2
# devicecode = <num> ; # deprecated, use stk500_devcode
# stk500_devcode = <num> ; # numeric
# avr910_devcode = <num> ; # numeric
# has_jtag = <yes/no> ; # part has JTAG i/f (deprecated, use prog_modes)
# has_debugwire = <yes/no> ; # part has debugWire i/f (deprecated, use prog_modes)
# has_pdi = <yes/no> ; # part has PDI i/f (deprecated, use prog_modes)
# has_updi = <yes/no> ; # part has UPDI i/f (deprecated, use prog_modes)
# has_tpi = <yes/no> ; # part has TPI i/f (deprecated, use prog_modes)
# is_avr32 = <yes/no> ; # AVR32 part (deprecated, use prog_modes)
# is_at90s1200 = <yes/no> ; # AT90S1200 part
# signature = <num> <num> <num> ; # signature bytes
# usbpid = <num> ; # DFU USB PID
# chip_erase_delay = <num> ; # micro-seconds
# reset = dedicated | io ;
# retry_pulse = reset | sck ;
# chip_erase_delay = <num> ; # chip erase delay (us)
# # STK500 parameters (parallel programming IO lines)
# pagel = <num> ; # pin name in hex, i.e., 0xD7
# bs2 = <num> ; # pin name in hex, i.e., 0xA0
# serial = <yes/no> ; # can use serial downloading
# parallel = <yes/no/pseudo> ; # can use par. programming
# # STK500v2 parameters, to be taken from Atmel's ATDF files
# timeout = <num> ;
# stabdelay = <num> ;
# cmdexedelay = <num> ;
# synchloops = <num> ;
# bytedelay = <num> ;
# pollvalue = <num> ;
# pollindex = <num> ;
# predelay = <num> ;
# postdelay = <num> ;
# pollmethod = <num> ;
# hvspcmdexedelay = <num> ;
# # STK500v2 HV programming parameters, from ATDFs
# pp_controlstack = <num>, <num>, ... ; # PP only
# hvsp_controlstack = <num>, <num>, ... ; # HVSP only
# flash_instr = <num>, <num>, <num> ;
# eeprom_instr = <num>, <num>, ... ;
# hventerstabdelay = <num> ;
# progmodedelay = <num> ; # PP only
# latchcycles = <num> ;
# togglevtg = <num> ;
# poweroffdelay = <num> ;
# resetdelayms = <num> ;
# resetdelayus = <num> ;
# hvleavestabdelay = <num> ;
# resetdelay = <num> ;
# synchcycles = <num> ; # HVSP only
# chiperasepulsewidth = <num> ; # PP only
# chiperasepolltimeout = <num> ;
# chiperasetime = <num> ; # HVSP only
# programfusepulsewidth = <num> ; # PP only
# programfusepolltimeout = <num> ;
# programlockpulsewidth = <num> ; # PP only
# programlockpolltimeout = <num> ;
# # JTAG ICE mkII parameters, also from ATDF files
# allowfullpagebitstream = <yes/no> ;
# enablepageprogramming = <yes/no> ;
# idr = <num> ; # IO addr of IDR (OCD) reg
# rampz = <num> ; # IO addr of RAMPZ reg
# spmcr = <num> ; # mem addr of SPMC[S]R reg
# eecr = <num> ; # mem addr of EECR reg only when != 0x3f
# mcu_base = <num> ;
# nvm_base = <num> ;
# ocd_base = <num> ;
# ocdrev = <num> ;
# pgm_enable = <instruction format> ;
# chip_erase = <instruction format> ;
#
# memory <memtype>
# paged = <yes/no> ; # yes/no (flash only, do not use for EEPROM)
# offset = <num> ; # memory offset
# size = <num> ; # bytes
# page_size = <num> ; # bytes
# num_pages = <num> ; # numeric
# n_word_writes = <num> ; # TPI only: if set, number of words to write
# min_write_delay = <num> ; # micro-seconds
# max_write_delay = <num> ; # micro-seconds
# readback = <num> <num> ; # pair of byte values
# readback_p1 = <num> ; # byte value (first component)
# readback_p2 = <num> ; # byte value (second component)
# pwroff_after_write = <yes/no> ; # yes/no
# mode = <num> ; # STK500 v2 file parameter from ATDF files
# delay = <num> ; # "
# blocksize = <num> ; # "
# readsize = <num> ; # "
# read = <instruction format> ;
# write = <instruction format> ;
# read_lo = <instruction format> ;
# read_hi = <instruction format> ;
# write_lo = <instruction format> ;
# write_hi = <instruction format> ;
# loadpage_lo = <instruction format> ;
# loadpage_hi = <instruction format> ;
# writepage = <instruction format> ;
# ;
# ;
#
# If any of the above parameters are not specified, the default value
# of 0 is used for numerics (except for mcuid, hvupdi_variant and
# ocdrev, where the default value is -1) or the empty string "" for
# string values. If a required parameter is left empty, AVRDUDE will
# complain. Almost all occurrences of numbers (with the exception of
# pin numbers and where they are separated by space, eg, in signature
# and readback) can also be given as simple expressions involving
# arithemtic and bitwise operators.
#
# Parts can also inherit parameters from previously defined parts
# using the following syntax. In this case specified integer and
# string values override parameter values from the parent part. New
# memory definitions are added to the definitions inherited from the
# parent. If, however, a new memory definition refers to an existing
# one of the same name for that part then, from v7.1, the existing
# memory definition is extended, and components overwritten with new
# values. Assigning NULL removes an inherited SPI instruction format,
# memory definition, control stack, eeprom or flash instruction, eg,
# as in memory "efuse" = NULL;
#
# part parent <id> # quoted string
# id = <id> ; # quoted string
# <any set of other parameters from the list above>
# ;
#
# NOTES:
# * 'devicecode' is the device code used by the STK500 (see codes
# listed below)
# * Not all memory types will implement all instructions
# * AVR Fuse bits and Lock bits are implemented as a type of memory
# * Example memory types are:
# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high
# fuse), "signature", "calibration", "lock"
# * The memory type specified on the avrdude command line must match
# one of the memory types defined for the specified chip
# * The pwroff_after_write flag causes avrdude to attempt to
# power the device off and back on after an unsuccessful write to
# the affected memory area if VCC programmer pins are defined. If
# VCC pins are not defined for the programmer, a message
# indicating that the device needs a power-cycle is printed out.
# This flag was added to work around a problem with the
# at90s4433/2333's; see the at90s4433 errata at:
#
# http://www.atmel.com/dyn/resources/prod_documents/doc1280.pdf
#
# INSTRUCTION FORMATS
#
# Instruction formats are specified as a comma separated list of
# string values containing information (bit specifiers) about each
# of the 32 bits of the instruction. Bit specifiers may be one of
# the following formats:
#
# '1' = the bit is always set on input as well as output
#
# '0' = the bit is always clear on input as well as output
#
# 'x' = the bit is ignored on input and output and set as 0
#
# 'a' = the bit is an address bit; from v 7.1 the bit-number
# is set to match the right bit position for the
# instruction to "just work"
#
# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12
# is address bit 12 on input, a0 is address bit 0.
#
# 'i' = the bit is an input data bit
#
# 'o' = the bit is an output data bit
#
# Each instruction must be composed of 32 bit specifiers. The
# instruction specification closely follows the instruction data
# provided in Atmel's data sheets for their parts. Note that flash
# addresses always refer to *word* addresses whilst all other
# memory types specify *byte* addresses.
#
# Example for signature read on the ATmega328P:
# read = "0 0 1 1 0 0 0 0", "0 0 0 x x x x x",
# "x x x x x x a1 a0", "o o o o o o o o";
#
# As the address bit numbers in the SPI opcodes are highly
# systematic, they don't really need to be specified. A compact
# version of the format specification neither uses bit-numbers for
# address lines nor spaces. If such a string is longer than 7
# characters, then the characters 0, 1, x, a, i and o will be
# recognised as the corresponding bit, whilst any of the characters
# ., -, _ or / can act as arbitrary visual separators, which are
# ignored. Examples:
#
# loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
#
# loadpage_lo = "0100.0000", "000x.xxxx", "xxaa.aaaa", "iiii.iiii";
#
#
# The following are STK500 part device codes to use for the
# "devicecode" field of the part. These came from Atmel's software
# section avr061.zip which accompanies the application note
# AVR061 available from:
#
# https://ww1.microchip.com/downloads/en/Appnotes/doc2525.pdf
#
#define ATTINY10 0x10 /* the _old_ one that never existed! */
#define ATTINY11 0x11
#define ATTINY12 0x12
#define ATTINY15 0x13
#define ATTINY13 0x14
#define ATTINY22 0x20
#define ATTINY26 0x21
#define ATTINY28 0x22
#define ATTINY2313 0x23
#define AT90S1200 0x33
#define AT90S2313 0x40
#define AT90S2323 0x41
#define AT90S2333 0x42
#define AT90S2343 0x43
#define AT90S4414 0x50
#define AT90S4433 0x51
#define AT90S4434 0x52
#define ATMEGA48 0x59
#define AT90S8515 0x60
#define AT90S8535 0x61
#define AT90C8534 0x62
#define ATMEGA8515 0x63
#define ATMEGA8535 0x64
#define ATMEGA8 0x70
#define ATMEGA88 0x73
#define ATMEGA168 0x86
#define ATMEGA161 0x80
#define ATMEGA163 0x81
#define ATMEGA16 0x82
#define ATMEGA162 0x83
#define ATMEGA169 0x84
#define ATMEGA323 0x90
#define ATMEGA32 0x91
#define ATMEGA64 0xA0
#define ATMEGA103 0xB1
#define ATMEGA128 0xB2
#define AT90CAN128 0xB3
#define AT90CAN64 0xB3
#define AT90CAN32 0xB3
#define AT86RF401 0xD0
#define AT89START 0xE0
#define AT89S51 0xE0
#define AT89S52 0xE1
# The following table lists the devices in the original AVR910
# appnote:
# |Device |Signature | Code |
# +-------+----------+------+
# |tiny12 | 1E 90 05 | 0x55 |
# |tiny15 | 1E 90 06 | 0x56 |
# | | | |
# | S1200 | 1E 90 01 | 0x13 |
# | | | |
# | S2313 | 1E 91 01 | 0x20 |
# | S2323 | 1E 91 02 | 0x48 |
# | S2333 | 1E 91 05 | 0x34 |
# | S2343 | 1E 91 03 | 0x4C |
# | | | |
# | S4414 | 1E 92 01 | 0x28 |
# | S4433 | 1E 92 03 | 0x30 |
# | S4434 | 1E 92 02 | 0x6C |
# | | | |
# | S8515 | 1E 93 01 | 0x38 |
# | S8535 | 1E 93 03 | 0x68 |
# | | | |
# |mega32 | 1E 95 01 | 0x72 |
# |mega83 | 1E 93 05 | 0x65 |
# |mega103| 1E 97 01 | 0x41 |
# |mega161| 1E 94 01 | 0x60 |
# |mega163| 1E 94 02 | 0x64 |
# Appnote AVR109 also has a table of AVR910 device codes, which
# lists:
# dev avr910 signature
# ATmega8 0x77 0x1E 0x93 0x07
# ATmega8515 0x3B 0x1E 0x93 0x06
# ATmega8535 0x6A 0x1E 0x93 0x08
# ATmega16 0x75 0x1E 0x94 0x03
# ATmega162 0x63 0x1E 0x94 0x04
# ATmega163 0x66 0x1E 0x94 0x02
# ATmega169 0x79 0x1E 0x94 0x05
# ATmega32 0x7F 0x1E 0x95 0x02
# ATmega323 0x73 0x1E 0x95 0x01
# ATmega64 0x46 0x1E 0x96 0x02
# ATmega128 0x44 0x1E 0x97 0x02
#
# These codes refer to "BOOT" device codes which are apparently
# different than standard device codes, for whatever reasons
# (often one above the standard code).
# There are several extended versions of AVR910 implementations around
# in the Internet. These add the following codes (only devices that
# actually exist are listed):
# ATmega8515 0x3A
# ATmega128 0x43
# ATmega64 0x45
# ATtiny26 0x5E
# ATmega8535 0x69
# ATmega32 0x72
# ATmega16 0x74
# ATmega8 0x76
# ATmega169 0x78
#
# Overall avrdude defaults; suitable for ~/.config/avrdude/avrdude.rc
#
default_parallel = "@DEFAULT_PAR_PORT@";
default_serial = "@DEFAULT_SER_PORT@";
default_spi = "@DEFAULT_SPI_PORT@";
# default_bitclock = 2.5;
@HAVE_PARPORT_BEGIN@
# Parallel port programmers
#------------------------------------------------------------
# bsd
#------------------------------------------------------------
programmer
id = "bsd";
desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
type = "par";
prog_modes = PM_TPI | PM_ISP;
vcc = 2, 3, 4, 5;
reset = 7;
sck = 8;
mosi = 9;
miso = 10;
;
#------------------------------------------------------------
# stk200
#------------------------------------------------------------
programmer
id = "stk200";
desc = "STK200";
type = "par";
prog_modes = PM_TPI | PM_ISP;
buff = 4, 5;
reset = 9;
sck = 6;
mosi = 7;
miso = 10;
;
#------------------------------------------------------------
# pony-stk200
#------------------------------------------------------------
# The programming dongle used by the popular Ponyprog
# utility. It is almost similar to the STK200 one,
# except that there is a LED indicating that the
# programming is currently in progress.
programmer parent "stk200"
id = "pony-stk200";
desc = "Pony Prog STK200";
pgmled = 8;
;
#------------------------------------------------------------
# dt006
#------------------------------------------------------------
programmer
id = "dt006";
desc = "Dontronics DT006";
type = "par";
prog_modes = PM_TPI | PM_ISP;
reset = 4;
sck = 5;
mosi = 2;
miso = 11;
;
#------------------------------------------------------------
# bascom
#------------------------------------------------------------
programmer parent "dt006"
id = "bascom";
desc = "Bascom SAMPLE programming cable";
;
#------------------------------------------------------------
# alf
#------------------------------------------------------------
programmer
id = "alf";
desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
type = "par";
prog_modes = PM_TPI | PM_ISP;
vcc = 2, 3, 4, 5;
buff = 6;
reset = 7;
sck = 8;
mosi = 9;
miso = 10;
errled = 1;
rdyled = 14;
pgmled = 16;
vfyled = 17;
;
#------------------------------------------------------------
# sp12
#------------------------------------------------------------
programmer
id = "sp12";
desc = "Steve Bolt's Programmer";
type = "par";
prog_modes = PM_TPI | PM_ISP;
vcc = 4, 5, 6, 7, 8;
reset = 3;
sck = 2;
mosi = 9;
miso = 11;
;
#------------------------------------------------------------
# picoweb
#------------------------------------------------------------
programmer
id = "picoweb";
desc = "Picoweb Programming Cable, http://www.picoweb.net/";
type = "par";
prog_modes = PM_TPI | PM_ISP;
reset = 2;
sck = 3;
mosi = 4;
miso = 13;
;
#------------------------------------------------------------
# abcmini
#------------------------------------------------------------
programmer
id = "abcmini";
desc = "ABCmini Board, aka Dick Smith HOTCHIP";
type = "par";
prog_modes = PM_TPI | PM_ISP;
reset = 4;
sck = 3;
mosi = 2;
miso = 10;
;
#------------------------------------------------------------
# futurlec
#------------------------------------------------------------
programmer
id = "futurlec";
desc = "Futurlec.com programming cable.";
type = "par";
prog_modes = PM_TPI | PM_ISP;
reset = 3;
sck = 2;
mosi = 1;
miso = 10;
;
#------------------------------------------------------------
# xil
#------------------------------------------------------------
# From the contributor of the "xil" jtag cable:
# The "vcc" definition isn't really vcc (the cable gets its power from
# the programming circuit) but is necessary to switch one of the
# buffer lines (trying to add it to the "buff" lines doesn't work in
# avrdude versions before 5.5j).
# With this, TMS connects to RESET, TDI to MOSI, TDO to MISO and TCK
# to SCK (plus vcc/gnd of course)
programmer
id = "xil";
desc = "Xilinx JTAG cable";
type = "par";
prog_modes = PM_TPI | PM_ISP;
vcc = 6;
buff = 5;
reset = 4;
sck = 3;
mosi = 2;
miso = 13;
;
#------------------------------------------------------------
# dapa
#------------------------------------------------------------
programmer
id = "dapa";
desc = "Direct AVR Parallel Access cable";
type = "par";
prog_modes = PM_TPI | PM_ISP;
vcc = 3;
reset = 16;
sck = 1;
mosi = 2;
miso = 11;
;
#------------------------------------------------------------
# atisp
#------------------------------------------------------------
programmer
id = "atisp";
desc = "AT-ISP v1.1 programming cable for AVR-SDK1 from <https://micro-research.co.th>";
type = "par";
prog_modes = PM_TPI | PM_ISP;
reset = ~6;
sck = ~8;
mosi = ~7;
miso = ~10;
;
#------------------------------------------------------------
# ere-isp-avr
#------------------------------------------------------------
programmer
id = "ere-isp-avr";
desc = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
type = "par";
prog_modes = PM_TPI | PM_ISP;
reset = ~4;
sck = 3;
mosi = 2;
miso = 10;
;
#------------------------------------------------------------
# blaster
#------------------------------------------------------------
programmer
id = "blaster";
desc = "Altera ByteBlaster";
type = "par";
prog_modes = PM_TPI | PM_ISP;
buff = 14;
reset = 3;
sck = 2;
mosi = 8;
miso = 11;
;
#------------------------------------------------------------
# frank-stk200
#------------------------------------------------------------
# It is almost same as pony-stk200, except vcc on pin 5 to auto
# disconnect port (download on http://electropol.free.fr/spip/spip.php?article27)
programmer parent "pony-stk200"
id = "frank-stk200";
desc = "Frank STK200";
vcc = 5;
buff = ; # delete buff pin assignment
;
#------------------------------------------------------------
# 89isp
#------------------------------------------------------------
# The AT98ISP Cable is a simple parallel dongle for AT89 family.
# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
programmer
id = "89isp";
desc = "Atmel at89isp cable";
type = "par";
prog_modes = PM_TPI | PM_ISP;
reset = 17;
sck = 1;
mosi = 2;
miso = 10;
;
@HAVE_PARPORT_END@
@HAVE_LINUXGPIO_BEGIN@
# This programmer bitbangs GPIO lines using the Linux sysfs GPIO interface
#
# To enable it set the configuration below to match the GPIO lines connected
# to the relevant ISP header pins and uncomment the entry definition. In case
# you don't have the required permissions to edit this system wide config
# file put the entry in a separate <your name>.conf file and use it with
# -C+<your name>.conf on the command line.
#
# To check if your avrdude build has support for the linuxgpio programmer
# compiled in, use -c?type on the command line and look for linuxgpio in the
# list. If it's not available you need pass the --enable-linuxgpio=yes option
# to configure and recompile avrdude.
#
#
# #------------------------------------------------------------
# # linuxgpio
# #------------------------------------------------------------
#
# programmer
# id = "linuxgpio";
# desc = "Use the Linux sysfs interface to bitbang GPIO lines";
# type = "linuxgpio";
# prog_modes = PM_ISP;
# reset = ?;
# sck = ?;
# mosi = ?;
# miso = ?;
# ;
@HAVE_LINUXGPIO_END@
@HAVE_LINUXSPI_BEGIN@
#------------------------------------------------------------
# linuxspi
#------------------------------------------------------------
# This programmer uses the built in linux SPI bus devices to program an
# attached AVR. The reset pin must be attached to a GPIO pin that
# is otherwise unused (see gpioinfo(1)); the SPI bus CE pins are not
# suitable since they would release /RESET too early.
#
programmer
id = "linuxspi";
desc = "Use Linux SPI device in /dev/spidev*";
type = "linuxspi";
prog_modes = PM_TPI | PM_ISP;
connection_type = spi;
reset = 25; # Pi GPIO number - this is J8:22
;
@HAVE_LINUXSPI_END@
#
# PROGRAMMER DEFINITIONS
#
#------------------------------------------------------------
# wiring
#------------------------------------------------------------
# http://wiring.org.co/
# Basically STK500v2 protocol, with some glue to trigger the bootloader
programmer
id = "wiring";
desc = "Wiring for bootloader using STK500 v2 protocol";
type = "wiring";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# arduino
#------------------------------------------------------------
programmer
id = "arduino";
desc = "Arduino for bootloader using STK500 v1 protocol";
type = "arduino";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# xbee
#------------------------------------------------------------
programmer
id = "xbee";
desc = "XBee for Series 2 Over-The-Air (XBeeBoot) bootloader using STK500 v1 protocol";
type = "xbee";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# avrftdi
#------------------------------------------------------------
# this will interface with the chips on these programmers:
#
# http://real.kiev.ua/old/avreal/en/adapters
# http://www.amontec.com/jtagkey.shtml, jtagkey-tiny.shtml
# http://www.olimex.com/dev/arm-usb-ocd.html, arm-usb-tiny.html
# http://www.ethernut.de/en/hardware/turtelizer/index.html
# http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html
# http://dangerousprototypes.com/docs/FT2232_breakout_board
# http://www.ftdichip.com/Products/Modules/DLPModules.htm,DLP-2232*,DLP-USB1232H
# http://flashrom.org/FT2232SPI_Programmer
#
# The drivers will look for a specific device and use the first one found.
# If you have mulitple devices, then look for unique information (like SN)
# And fill that in here.
#
# Note that the pin numbers for the main ISP signals (reset, sck,
# mosi, miso) are fixed and cannot be changed, since they must match
# the way the Multi-Protocol Synchronous Serial Engine (MPSSE) of
# these FTDI ICs has been designed.
programmer
id = "avrftdi";
desc = "FT2232D based generic programmer";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6010;
usbdev = "A";
# ISP-signals - lower ADBUS-Nibble (default)
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
# LED SIGNALs - higher ADBUS-Nibble
# errled = 4;
# rdyled = 5;
# pgmled = 6;
# vfyled = 7;
# Buffer Signal - ACBUS - Nibble
# buff = 8;
;
#------------------------------------------------------------
# 2232HIO
#------------------------------------------------------------
# This is an implementation of the above with a buffer IC (74AC244) and
# 4 LEDs directly attached, all active low.
programmer
id = "2232HIO";
desc = "FT2232H based generic programmer";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
# Note: This PID is reserved for generic H devices and
# should be programmed into the EEPROM
# usbpid = 0x8A48;
usbpid = 0x6010;
usbdev = "A";
buff = ~4;
#ISP-signals
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
#LED SIGNALs
errled = ~11;
rdyled = ~14;
pgmled = ~13;
vfyled = ~12;
;
#------------------------------------------------------------
# 4232h
#------------------------------------------------------------
#The FT4232H can be treated as FT2232H, but it has a different USB
#device ID of 0x6011.
programmer parent "avrftdi"
id = "4232h";
desc = "FT4232H based generic programmer";
usbpid = 0x6011;
;
#------------------------------------------------------------
# jtagkey
#------------------------------------------------------------
programmer
id = "jtagkey";
desc = "Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
# Note: This PID is used in all JTAGKey variants
usbpid = 0xcff8;
usbdev = "A";
buff = ~4;
# ISP-signals => 20 - Pin connector on JTAGKey
reset = 3; # TMS 7 violet
sck = 0; # TCK 9 white
mosi = 1; # TDI 5 green
miso = 2; # TDO 13 orange
# VTG VREF 1 brown with red tip
# GND GND 20 black
# The colors are on the 20 pin breakout cable from Amontec
;
#------------------------------------------------------------
# ft232h
#------------------------------------------------------------
programmer
id = "ft232h";
desc = "FT232H in MPSSE mode";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6014;
usbdev = "A";
#ISP-signals
reset = 3; # AD3 (TMS)
sck = 0; # AD0 (TCK)
mosi = 1; # AD1 (TDI)
miso = 2; # AD2 (TDO)
;
#------------------------------------------------------------
# um232h
#------------------------------------------------------------
# Pin J2-7 (AD0) is SCK
# Pin J2-8 (AD1) is MOSI
# Pin J2-9 (AD2) is MISO
# Pin J2-10 (AD3) is RESET
# Pin J2-6 is GND
# Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
# a 16MHz Atmega1280 to program reliably. The 232H is conveniently 5V tolerant.
programmer parent "ft232h"
id = "um232h";
desc = "UM232H module from FTDI";
usbpid = 0x6014;
;
#------------------------------------------------------------
# c232hm
#------------------------------------------------------------
# Orange (Pin 2) is SCK
# Yellow (Pin 3) is MOSI
# Green (Pin 4) is MISO
# Brown (Pin 5) is RESET
# Black (Pin 10) is GND
# Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
# a 16MHz Atmega1280 to program reliably. The 232H is conveniently 5V tolerant.
programmer parent "ft232h"
id = "c232hm";
desc = "C232HM cable from FTDI";
usbpid = 0x6014;
;
#------------------------------------------------------------
# o-link
#------------------------------------------------------------
# On the adapter you can read "O-Link". On the PCB is printed "OpenJTAG v3.1"
# You can find it as "OpenJTAG ARM JTAG USB" in the internet.
# (But there are also several projects called Open JTAG, eg.
# http://www.openjtag.org, which are completely different.)
# http://www.100ask.net/shop/english.html (website seems to be outdated)
# http://item.taobao.com/item.htm?id=1559277013
# http://www.micro4you.com/store/openjtag-arm-jtag-usb.html (schematics!)
# some other sources which call it O-Link
# http://www.andahammer.com/olink/
# http://www.developmentboard.net/31-o-link-debugger.html
# http://armwerks.com/catalog/o-link-debugger-copy/
# or just have a look at ebay ...
# It is basically the same entry as jtagkey with different usb ids.
programmer parent "jtagkey"
id = "o-link";
desc = "O-Link, OpenJTAG from www.100ask.net";
usbvid = 0x1457;
usbpid = 0x5118;
usbvendor = "www.100ask.net";
usbproduct = "USB<=>JTAG&RS232";
;
#------------------------------------------------------------
# openmoko
#------------------------------------------------------------
# http://wiki.openmoko.org/wiki/Debug_Board_v3
programmer
id = "openmoko";
desc = "Openmoko debug board (v3)";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
usbvid = 0x1457;
usbpid = 0x5118;
usbdev = "A";
reset = 3; # TMS 7
sck = 0; # TCK 9
mosi = 1; # TDI 5
miso = 2; # TDO 13
;
#------------------------------------------------------------
# lm3s811
#------------------------------------------------------------
# Only Rev. A boards.
# Schematic and user manual: http://www.cs.put.poznan.pl/wswitala/download/pdf/811EVBK.pdf
programmer
id = "lm3s811";
desc = "Luminary Micro LM3S811 Eval Board (Rev. A)";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0xbcd9;
usbdev = "A";
usbvendor = "LMI";
usbproduct = "LM3S811 Evaluation Board";
# Enable correct buffers
buff = 7;
#ISP-signals - lower ACBUS-Nibble (default)
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
;
#------------------------------------------------------------
# tumpa
#------------------------------------------------------------
# submitted as bug #46020
programmer
id = "tumpa";
desc = "TIAO USB Multi-Protocol Adapter";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x8a98;
usbdev = "A";
usbvendor = "TIAO";
reset = 3; # TMS 7
sck = 0; # TCK 9
mosi = 1; # TDI 5
miso = 2; # TDO 13
;
#------------------------------------------------------------
# ktlink
#------------------------------------------------------------
# Kristech KT-LINK FT2232H interface with IO switching and voltage buffers.
# Created on 20220410 by CeDeROM Tomasz CEDRO (www.cederom.io).
# Interface DataSheet: https://kristech.pl/files/KT-LINK-UM-ENG.pdf
# AVRDUDE FT2232H PIN NUMBER DECODE:
# | 0 | 1 | .. | 7 | 8 | 9 | .. | 15 |
# | ADBUS0 | ADBUS1 | .. | ADBUS7 | ACBUS0 | ACBUS1 | .. | ACBUS7 |
# KT-LINK JTAG CONN:
# 1=Vsense(->EXT13), 19=5V(EXT1->EXT3), 20=GND, 3=TPIRST, 9=TPICLK, 7=TPIDATA.
# INTERNALS CONFIGURATION ("~" MEANS ACTIVE LOW):
# ~TRST_EN=10(ACBUS2), ~CLK_EN=14(ACBUS6), ~MOSI_EN=13(ACBUS5),
# TMS_SEL=5(ADBUS5), ~TMS_EN=12(ACBUS4), LED=~15(ACBUS7).
# CONNECTION NOTES:
# * Connect EXT connector pin 1 with 3 to get 5V on JTAG connector pin 19.
# * Connect JTAG connector pin 1 to 5V (i.e. EXT pin 13 or JTAG pin 19).
# * For TPI connection use resistors: TDO --[470R]-- TPIDATA --[470R]-- TDI.
# * Powering target from JTAG pin 19 allows KT-LINK current measurement.
programmer
id = "ktlink";
desc = "KT-LINK FT2232H interface with IO switching and voltage buffers.";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0xbbe2;
usbdev = "A";
buff = 5, ~10, ~13, ~14;
reset = 8;
sck = 0;
mosi = 1;
miso = 2;
rdyled = ~15;
;
#------------------------------------------------------------
# digilent-hs2
#------------------------------------------------------------
# Digilent JTAG HS2 programmer. FT232H-based dongle with buffers.
# https://digilent.com/reference/_media/reference/programmers/jtag-hs2/jtag-hs2_rm.pdf
programmer
id = "digilent-hs2";
desc = "Digilient JTAG HS2 (MPSSE)";
type = "avrftdi";
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6014;
usbdev = "A";
buff = 5, 6, 7;
reset = 3;
sck = 0;
mosi = 1;
miso = 2;
;
#------------------------------------------------------------
# serialupdi
#------------------------------------------------------------
programmer
id = "serialupdi";
desc = "SerialUPDI";
type = "serialupdi";
prog_modes = PM_UPDI;
connection_type = serial;
hvupdi_support = 1;
;
#------------------------------------------------------------
# avrisp
#------------------------------------------------------------
programmer
id = "avrisp";
desc = "Atmel AVR ISP";
type = "stk500";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# avrispv2
#------------------------------------------------------------
programmer
id = "avrispv2";
desc = "Atmel AVR ISP v2";
type = "stk500v2";
prog_modes = PM_TPI | PM_ISP | PM_PDI;
connection_type = serial;
;
#------------------------------------------------------------
# avrispmkII
#------------------------------------------------------------
programmer
id = "avrispmkII";
desc = "Atmel AVR ISP mkII";
type = "stk500v2";
prog_modes = PM_TPI | PM_ISP | PM_PDI;
connection_type = usb;
;
#------------------------------------------------------------
# avrisp2
#------------------------------------------------------------
programmer parent "avrispmkII"
id = "avrisp2";
;
#------------------------------------------------------------
# buspirate
#------------------------------------------------------------
programmer
id = "buspirate";
desc = "The Bus Pirate";
type = "buspirate";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# buspirate_bb
#------------------------------------------------------------
programmer
id = "buspirate_bb";
desc = "The Bus Pirate (bitbang interface, supports TPI)";
type = "buspirate_bb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
# pins are bits in bitbang byte (numbers are 87654321)
# 1|POWER|PULLUP|AUX|MOSI|CLK|MISO|CS
reset = 1;
sck = 3;
mosi = 4;
miso = 2;
# vcc = 7; # Internally set independent of this setting
;
#------------------------------------------------------------
# stk500
#------------------------------------------------------------
# This is supposed to be the "default" STK500 entry.
# Attempts to select the correct firmware version
# by probing for it. Better use one of the entries
# below instead.
programmer
id = "stk500";
desc = "Atmel STK500";
type = "stk500generic";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# stk500v1
#------------------------------------------------------------
programmer
id = "stk500v1";
desc = "Atmel STK500 version 1.x firmware";
type = "stk500";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# mib510
#------------------------------------------------------------
programmer
id = "mib510";
desc = "Crossbow MIB510 programming board";
type = "stk500";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# stk500v2
#------------------------------------------------------------
programmer
id = "stk500v2";
desc = "Atmel STK500 version 2.x firmware";
type = "stk500v2";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# stk500pp
#------------------------------------------------------------
programmer
id = "stk500pp";
desc = "Atmel STK500 v2 in parallel programming mode";
type = "stk500pp";
prog_modes = PM_HVPP;
connection_type = serial;
;
#------------------------------------------------------------
# stk500hvsp
#------------------------------------------------------------
programmer
id = "stk500hvsp";
desc = "Atmel STK500 v2 in high-voltage serial programming mode";
type = "stk500hvsp";
prog_modes = PM_HVSP;
connection_type = serial;
;
#------------------------------------------------------------
# stk600
#------------------------------------------------------------
programmer
id = "stk600";
desc = "Atmel STK600";
type = "stk600";
prog_modes = PM_TPI | PM_ISP | PM_PDI;
connection_type = usb;
;
#------------------------------------------------------------
# stk600pp
#------------------------------------------------------------
programmer
id = "stk600pp";
desc = "Atmel STK600 in parallel programming mode";
type = "stk600pp";
prog_modes = PM_HVPP;
connection_type = usb;
;
#------------------------------------------------------------
# stk600hvsp
#------------------------------------------------------------
programmer
id = "stk600hvsp";
desc = "Atmel STK600 in high-voltage serial programming mode";
type = "stk600hvsp";
prog_modes = PM_HVSP;
connection_type = usb;
;
#------------------------------------------------------------
# avr910
#------------------------------------------------------------
programmer
id = "avr910";
desc = "Atmel Low Cost Serial Programmer";
type = "avr910";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# ft245r
#------------------------------------------------------------
programmer
id = "ft245r";
desc = "FT245R Synchronous BitBang";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 4; # D4
sck = 0; # D0
mosi = 2; # D2
miso = 1; # D1
;
#------------------------------------------------------------
# ft232r
#------------------------------------------------------------
programmer
id = "ft232r";
desc = "FT232R Synchronous BitBang";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 4; # DTR
sck = 0; # TxD
mosi = 2; # RTS
miso = 1; # RxD
;
#------------------------------------------------------------
# bwmega
#------------------------------------------------------------
# see http://www.bitwizard.nl/wiki/index.php/FTDI_ATmega
programmer
id = "bwmega";
desc = "BitWizard ftdi_atmega builtin programmer";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 7; # RI
sck = 6; # DCD
mosi = 3; # CTS
miso = 5; # DSR
;
#------------------------------------------------------------
# arduino-ft232r
#------------------------------------------------------------
# see http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html
# Note: pins are numbered from 1!
programmer
id = "arduino-ft232r";
desc = "Arduino: FT232R connected to ISP";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 7; # RI X3(4)
sck = 5; # DSR X3(2)
mosi = 6; # DCD X3(3)
miso = 3; # CTS X3(1)
;
#------------------------------------------------------------
# tc2030
#------------------------------------------------------------
programmer
id = "tc2030";
desc = "Tag-Connect TC2030";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
# FOR TPI devices:
reset = 3; # CTS = D3 (wire to ~RESET)
sck = 2; # RTS = D2 (wire to SCK)
mosi = 0; # TxD = D0 (wire to TPIDATA via 1k resistor)
miso = 1; # RxD = D1 (wire to TPIDATA directly)
;
#------------------------------------------------------------
# diecimila
#------------------------------------------------------------
# website mentioned above uses this id
programmer parent "arduino-ft232r"
id = "diecimila";
desc = "alias for arduino-ft232r";
;
#------------------------------------------------------------
# uncompatino
#------------------------------------------------------------
# There is a ATmega328P kit PCB called "uncompatino".
# This board allows ISP via its on-board FT232R.
# This is designed like Arduino Duemilanove but has no standard ICPS header.
# Its 4 pairs of pins are shorted to enable ftdi_syncbb.
# http://akizukidenshi.com/catalog/g/gP-07487/
# http://akizukidenshi.com/download/ds/akizuki/k6096_manual_20130816.pdf
programmer
id = "uncompatino";
desc = "uncompatino with all pairs of pins shorted";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 7; # ri
sck = 5; # dsr
mosi = 6; # dcd
miso = 3; # cts
;
#------------------------------------------------------------
# ttl232r
#------------------------------------------------------------
# FTDI USB to serial cable TTL-232R-5V with a custom adapter for ICSP
# http://www.ftdichip.com/Products/Cables/USBTTLSerial.htm
# http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232R_CABLES.pdf
# For ICSP pinout see for example http://www.atmel.com/images/doc2562.pdf
# (Figure 1. ISP6PIN header pinout and Table 1. Connections required for ISP ...)
# TTL-232R GND 1 Black -> ICPS GND (pin 6)
# TTL-232R CTS 2 Brown -> ICPS MOSI (pin 4)
# TTL-232R VCC 3 Red -> ICPS VCC (pin 2)
# TTL-232R TXD 4 Orange -> ICPS RESET (pin 5)
# TTL-232R RXD 5 Yellow -> ICPS SCK (pin 3)
# TTL-232R RTS 6 Green -> ICPS MISO (pin 1)
# Except for VCC and GND, you can connect arbitual pairs as long as
# the following table is adjusted.
programmer
id = "ttl232r";
desc = "FTDI TTL232R-5V with ICSP adapter";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 0; # txd
sck = 1; # rxd
mosi = 3; # cts
miso = 2; # rts
;
#------------------------------------------------------------
# usbasp
#------------------------------------------------------------
programmer
id = "usbasp";
desc = "USBasp, http://www.fischl.de/usbasp/";
type = "usbasp";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x16c0; # VOTI
usbpid = 0x05dc; # Obdev's free shared PID
usbvendor = "www.fischl.de";
usbproduct = "USBasp";
# following variants are autodetected for id "usbasp"
# original usbasp from fischl.de
# see above "usbasp"
# old usbasp from fischl.de
# usbvid = 0x03EB; # ATMEL
# usbpid = 0xC7B4; # (unoffical) USBasp
# usbvendor = "www.fischl.de";
# usbproduct = "USBasp";
# NIBObee (only if -P nibobee is given on command line)
# see below "nibobee"
;
#------------------------------------------------------------
# nibobee
#------------------------------------------------------------
programmer
id = "nibobee";
desc = "NIBObee";
type = "usbasp";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x16c0; # VOTI
usbpid = 0x092f; # NIBObee PID
usbvendor = "www.nicai-systems.com";
usbproduct = "NIBObee";
;
#------------------------------------------------------------
# usbasp-clone
#------------------------------------------------------------
programmer
id = "usbasp-clone";
desc = "Any usbasp clone with correct VID/PID";
type = "usbasp";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x16c0; # VOTI
usbpid = 0x05dc; # Obdev's free shared PID
;
#------------------------------------------------------------
# usbtiny
#------------------------------------------------------------
# USBtiny can also be used for TPI programming.
# In that case, a resistor of 1 kOhm is needed between MISO and MOSI
# pins of the connector, and MISO (pin 1 of the 6-pin connector)
# connects to TPIDATA.
programmer
id = "usbtiny";
desc = "USBtiny simple USB programmer, https://learn.adafruit.com/usbtinyisp";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x1781;
usbpid = 0x0c9f;
;
#------------------------------------------------------------
# arduino_gemma
#------------------------------------------------------------
# https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/gemma
programmer
id = "arduino_gemma";
desc = "Arduino Gemma bootloader disguised as USBtiny";
type = "usbtiny";
prog_modes = PM_SPM;
connection_type = usb;
usbvid = 0x2341;
usbpid = 0x0c9f;
;
#------------------------------------------------------------
# adafruit_gemma
#------------------------------------------------------------
# https://github.com/adafruit/Adafruit-Trinket-Gemma-Bootloader
programmer
id = "adafruit_gemma";
desc = "Adafruit Trinket Gemma bootloader disguised as USBtiny";
type = "usbtiny";
prog_modes = PM_SPM;
connection_type = usb;
usbvid = 0x1781;
usbpid = 0x0c9f;
;
#------------------------------------------------------------
# arduinoisp
#------------------------------------------------------------
programmer
id = "arduinoisp";
desc = "Arduino ISP Programmer";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x2341;
usbpid = 0x0049;
;
#------------------------------------------------------------
# arduinoisporg
#------------------------------------------------------------
programmer
id = "arduinoisporg";
desc = "Arduino ISP Programmer";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x2a03;
usbpid = 0x0049;
;
#------------------------------------------------------------
# ehajo-isp
#------------------------------------------------------------
# commercial version of USBtiny, using a separate VID/PID
programmer
id = "ehajo-isp";
desc = "avr-isp-programmer from eHaJo, http://www.eHaJo.de";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x16d0;
usbpid = 0x0ba5;
;
#------------------------------------------------------------
# iseavrprog
#------------------------------------------------------------
# commercial version of USBtiny, using a separate VID/PID
# https://github.com/IowaScaledEngineering/ckt-avrprogrammer
programmer
id = "iseavrprog";
desc = "USBtiny-based programmer, https://iascaled.com";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x1209;
usbpid = 0x6570;
;
#------------------------------------------------------------
# micronucleus
#------------------------------------------------------------
programmer
id = "micronucleus";
desc = "Micronucleus for bootloader";
type = "micronucleus";
prog_modes = PM_SPM;
connection_type = usb;
usbvid = 0x16d0;
usbpid = 0x0753;
;
#------------------------------------------------------------
# teensy
#------------------------------------------------------------
programmer
id = "teensy";
desc = "Teensy for bootloader";
type = "teensy";
prog_modes = PM_SPM;
connection_type = usb;
usbvid = 0x16c0;
usbpid = 0x0478;
;
#------------------------------------------------------------
# butterfly
#------------------------------------------------------------
programmer
id = "butterfly";
desc = "Atmel for bootloader (Butterfly Development Board)";
type = "butterfly";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# avr109
#------------------------------------------------------------
programmer
id = "avr109";
desc = "Atmel for bootloader using AppNote AVR109";
type = "butterfly";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# avr911
#------------------------------------------------------------
programmer
id = "avr911";
desc = "Atmel for bootloader using AppNote AVR911 AVROSP";
type = "butterfly";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# mkbutterfly
#------------------------------------------------------------
# suggested in http://forum.mikrokopter.de/topic-post48317.html
programmer
id = "mkbutterfly";
desc = "Mikrokopter.de Butterfly for bootloader";
type = "butterfly_mk";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# butterfly_mk
#------------------------------------------------------------
programmer parent "mkbutterfly"
id = "butterfly_mk";
;
#------------------------------------------------------------
# jtagmkI
#------------------------------------------------------------
programmer
id = "jtagmkI";
desc = "Atmel JTAG ICE (mkI)";
type = "jtagmki";
prog_modes = PM_JTAGmkI;
connection_type = serial;
baudrate = 115200; # default is 115200
;
#------------------------------------------------------------
# jtag1
#------------------------------------------------------------
# easier to type
programmer parent "jtagmkI"
id = "jtag1";
;
#------------------------------------------------------------
# jtag1slow
#------------------------------------------------------------
# easier to type
programmer parent "jtag1"
id = "jtag1slow";
baudrate = 19200;
;
#------------------------------------------------------------
# jtagmkII
#------------------------------------------------------------
# The JTAG ICE mkII has both, serial and USB connectivity. As it is
# mostly used through USB these days (AVR Studio 5 only supporting it
# that way), we make connection_type = usb the default. Users are
# still free to use a serial port with the -P option.
programmer
id = "jtagmkII";
desc = "Atmel JTAG ICE mkII";
type = "jtagmkii";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
connection_type = usb;
baudrate = 19200; # default is 19200
;
#------------------------------------------------------------
# jtag2slow
#------------------------------------------------------------
# easier to type
programmer parent "jtagmkII"
id = "jtag2slow";
;
#------------------------------------------------------------
# jtag2fast
#------------------------------------------------------------
# JTAG ICE mkII @ 115200 Bd
programmer parent "jtag2slow"
id = "jtag2fast";
baudrate = 115200;
;
#------------------------------------------------------------
# jtag2
#------------------------------------------------------------
# make the fast one the default, people will love that
programmer parent "jtag2fast"
id = "jtag2";
;
#------------------------------------------------------------
# jtag2isp
#------------------------------------------------------------
# JTAG ICE mkII in ISP mode
programmer
id = "jtag2isp";
desc = "Atmel JTAG ICE mkII in ISP mode";
type = "jtagmkii_isp";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtag2dw
#------------------------------------------------------------
# JTAG ICE mkII in debugWire mode
programmer
id = "jtag2dw";
desc = "Atmel JTAG ICE mkII in debugWire mode";
type = "jtagmkii_dw";
prog_modes = PM_debugWIRE;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtagmkII_avr32
#------------------------------------------------------------
# JTAG ICE mkII in AVR32 mode
programmer
id = "jtagmkII_avr32";
desc = "Atmel JTAG ICE mkII in AVR32 mode";
type = "jtagmkii_avr32";
prog_modes = PM_aWire;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtag2avr32
#------------------------------------------------------------
# JTAG ICE mkII in AVR32 mode
programmer
id = "jtag2avr32";
desc = "Atmel JTAG ICE mkII in AVR32 mode";
type = "jtagmkii_avr32";
prog_modes = PM_aWire;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtag2pdi
#------------------------------------------------------------
# JTAG ICE mkII in PDI mode
programmer
id = "jtag2pdi";
desc = "Atmel JTAG ICE mkII in PDI mode";
type = "jtagmkii_pdi";
prog_modes = PM_PDI;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_jtag
#------------------------------------------------------------
# AVR Dragon in JTAG mode
programmer
id = "dragon_jtag";
desc = "Atmel AVR Dragon in JTAG mode";
type = "dragon_jtag";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_isp
#------------------------------------------------------------
# AVR Dragon in ISP mode
programmer
id = "dragon_isp";
desc = "Atmel AVR Dragon in ISP mode";
type = "dragon_isp";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_pp
#------------------------------------------------------------
# AVR Dragon in PP mode
programmer
id = "dragon_pp";
desc = "Atmel AVR Dragon in PP mode";
type = "dragon_pp";
prog_modes = PM_HVPP;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_hvsp
#------------------------------------------------------------
# AVR Dragon in HVSP mode
programmer
id = "dragon_hvsp";
desc = "Atmel AVR Dragon in HVSP mode";
type = "dragon_hvsp";
prog_modes = PM_HVSP;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_dw
#------------------------------------------------------------
# AVR Dragon in debugWire mode
programmer
id = "dragon_dw";
desc = "Atmel AVR Dragon in debugWire mode";
type = "dragon_dw";
prog_modes = PM_debugWIRE;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_pdi
#------------------------------------------------------------
# AVR Dragon in PDI mode
programmer
id = "dragon_pdi";
desc = "Atmel AVR Dragon in PDI mode";
type = "dragon_pdi";
prog_modes = PM_PDI;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtag3
#------------------------------------------------------------
programmer
id = "jtag3";
desc = "Atmel AVR JTAGICE3 in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
#------------------------------------------------------------
# jtag3pdi
#------------------------------------------------------------
programmer
id = "jtag3pdi";
desc = "Atmel AVR JTAGICE3 in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
#------------------------------------------------------------
# jtag3updi
#------------------------------------------------------------
programmer
id = "jtag3updi";
desc = "Atmel AVR JTAGICE3 in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
connection_type = usb;
usbpid = 0x2110, 0x2140;
hvupdi_support = 1;
;
#------------------------------------------------------------
# jtag3dw
#------------------------------------------------------------
programmer
id = "jtag3dw";
desc = "Atmel AVR JTAGICE3 in debugWIRE mode";
type = "jtagice3_dw";
prog_modes = PM_debugWIRE;
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
#------------------------------------------------------------
# jtag3isp
#------------------------------------------------------------
programmer
id = "jtag3isp";
desc = "Atmel AVR JTAGICE3 in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
#------------------------------------------------------------
# xplainedpro
#------------------------------------------------------------
programmer
id = "xplainedpro";
desc = "Atmel AVR XplainedPro in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
connection_type = usb;
usbpid = 0x2111;
;
#------------------------------------------------------------
# xplainedpro_updi
#------------------------------------------------------------
programmer
id = "xplainedpro_updi";
desc = "Atmel AVR XplainedPro in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
connection_type = usb;
usbpid = 0x2111;
hvupdi_support = 1;
;
#------------------------------------------------------------
# xplainedmini
#------------------------------------------------------------
programmer
id = "xplainedmini";
desc = "Atmel AVR XplainedMini in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
connection_type = usb;
usbpid = 0x2145;
;
#------------------------------------------------------------
# xplainedmini_dw
#------------------------------------------------------------
programmer
id = "xplainedmini_dw";
desc = "Atmel AVR XplainedMini in debugWIRE mode";
type = "jtagice3_dw";
prog_modes = PM_debugWIRE;
connection_type = usb;
usbpid = 0x2145;
;
#------------------------------------------------------------
# xplainedmini_updi
#------------------------------------------------------------
programmer
id = "xplainedmini_updi";
desc = "Atmel AVR XplainedMini in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
connection_type = usb;
usbpid = 0x2145;
hvupdi_support = 1;
;
#------------------------------------------------------------
# atmelice
#------------------------------------------------------------
programmer
id = "atmelice";
desc = "Atmel-ICE (ARM/AVR) in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# atmelice_pdi
#------------------------------------------------------------
programmer
id = "atmelice_pdi";
desc = "Atmel-ICE (ARM/AVR) in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# atmelice_updi
#------------------------------------------------------------
programmer
id = "atmelice_updi";
desc = "Atmel-ICE (ARM/AVR) in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
connection_type = usb;
usbpid = 0x2141;
hvupdi_support = 1;
;
#------------------------------------------------------------
# atmelice_dw
#------------------------------------------------------------
programmer
id = "atmelice_dw";
desc = "Atmel-ICE (ARM/AVR) in debugWIRE mode";
type = "jtagice3_dw";
prog_modes = PM_debugWIRE;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# atmelice_isp
#------------------------------------------------------------
programmer
id = "atmelice_isp";
desc = "Atmel-ICE (ARM/AVR) in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# powerdebugger
#------------------------------------------------------------
programmer
id = "powerdebugger";
desc = "Atmel PowerDebugger (ARM/AVR) in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# powerdebugger_pdi
#------------------------------------------------------------
programmer
id = "powerdebugger_pdi";
desc = "Atmel PowerDebugger (ARM/AVR) in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# powerdebugger_updi
#------------------------------------------------------------
programmer
id = "powerdebugger_updi";
desc = "Atmel PowerDebugger (ARM/AVR) in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
connection_type = usb;
usbpid = 0x2144;
hvupdi_support = 0, 1;
;
#------------------------------------------------------------
# powerdebugger_dw
#------------------------------------------------------------
programmer
id = "powerdebugger_dw";
desc = "Atmel PowerDebugger (ARM/AVR) in debugWire mode";
type = "jtagice3_dw";
prog_modes = PM_debugWIRE;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# powerdebugger_isp
#------------------------------------------------------------
programmer
id = "powerdebugger_isp";
desc = "Atmel PowerDebugger (ARM/AVR) in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# pickit4_updi
#------------------------------------------------------------
programmer
id = "pickit4_updi";
desc = "MPLAB(R) PICkit 4 in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
connection_type = usb;
usbpid = 0x2177, 0x2178, 0x2179;
hvupdi_support = 0, 1, 2;
;
#------------------------------------------------------------
# pickit4_pdi
#------------------------------------------------------------
programmer
id = "pickit4_pdi";
desc = "MPLAB(R) PICkit 4 in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
connection_type = usb;
usbpid = 0x2177, 0x2178, 0x2179;
;
#------------------------------------------------------------
# pickit4_isp
#------------------------------------------------------------
programmer
id = "pickit4_isp";
desc = "MPLAB(R) PICkit 4 in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
connection_type = usb;
usbpid = 0x2177, 0x2178, 0x2179;
;
#------------------------------------------------------------
# snap_updi
#------------------------------------------------------------
programmer
id = "snap_updi";
desc = "MPLAB(R) SNAP in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
connection_type = usb;
usbpid = 0x2180, 0x217f, 0x2181;
hvupdi_support = 1;
;
#------------------------------------------------------------
# snap_pdi
#------------------------------------------------------------
programmer
id = "snap_pdi";
desc = "MPLAB(R) SNAP in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
connection_type = usb;
usbpid = 0x2180, 0x217f, 0x2181;
;
#------------------------------------------------------------
# snap_isp
#------------------------------------------------------------
programmer
id = "snap_isp";
desc = "MPLAB(R) SNAP in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
connection_type = usb;
usbpid = 0x2180, 0x217f, 0x2181;
;
#------------------------------------------------------------
# pkobn_updi
#------------------------------------------------------------
programmer
id = "pkobn_updi";
desc = "Curiosity nano (nEDBG) in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
connection_type = usb;
usbpid = 0x2175;
hvupdi_support = 1;
;
#------------------------------------------------------------
# pavr
#------------------------------------------------------------
programmer
id = "pavr";
desc = "Jason Kyle's pAVR Serial Programmer";
type = "avr910";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# pickit2
#------------------------------------------------------------
programmer
id = "pickit2";
desc = "MicroChip's PICkit2 Programmer";
type = "pickit2";
prog_modes = PM_ISP;
connection_type = usb;
;
#------------------------------------------------------------
# flip1
#------------------------------------------------------------
programmer
id = "flip1";
desc = "FLIP for bootloader using USB DFU protocol version 1 (doc7618)";
type = "flip1";
prog_modes = PM_SPM;
connection_type = usb;
;
#------------------------------------------------------------
# flip2
#------------------------------------------------------------
programmer
id = "flip2";
desc = "FLIP for bootloader using USB DFU protocol version 2 (AVR4023)";
type = "flip2";
prog_modes = PM_SPM;
connection_type = usb;
;
#------------------------------------------------------------
# ponyser
#------------------------------------------------------------
# some ultra cheap programmers use bitbanging on the serialport
#
# PC - DB9 - Pins for RS232:
#
# GND 5 -- |O
# | O| <- 9 RI
# DTR 4 <- |O |
# | O| <- 8 CTS
# TXD 3 <- |O |
# | O| -> 7 RTS
# RXD 2 -> |O |
# | O| <- 6 DSR
# DCD 1 -> |O
#
# Using RXD is currently not supported.
# Using RI is not supported under Win32 but is supported under Posix.
# serial ponyprog design (dasa2 in uisp)
# reset=!txd sck=rts mosi=dtr miso=cts
programmer
id = "ponyser";
desc = "design ponyprog serial, reset=!txd sck=rts mosi=dtr miso=cts";
type = "serbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
reset = ~3;
sck = 7;
mosi = 4;
miso = 8;
;
#------------------------------------------------------------
# siprog
#------------------------------------------------------------
# Same as above, different name
# reset=!txd sck=rts mosi=dtr miso=cts
programmer parent "ponyser"
id = "siprog";
desc = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
;
#------------------------------------------------------------
# dasa
#------------------------------------------------------------
# unknown (dasa in uisp)
# reset=rts sck=dtr mosi=txd miso=cts
programmer
id = "dasa";
desc = "serial port banging, reset=rts sck=dtr mosi=txd miso=cts";
type = "serbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
reset = 7;
sck = 4;
mosi = 3;
miso = 8;
;
#------------------------------------------------------------
# dasa3
#------------------------------------------------------------
# unknown (dasa3 in uisp)
# reset=!dtr sck=rts mosi=txd miso=cts
programmer
id = "dasa3";
desc = "serial port banging, reset=!dtr sck=rts mosi=txd miso=cts";
type = "serbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
reset = ~4;
sck = 7;
mosi = 3;
miso = 8;
;
#------------------------------------------------------------
# C2N232i
#------------------------------------------------------------
# C2N232i (jumper configuration "auto")
# reset=dtr sck=!rts mosi=!txd miso=!cts
programmer
id = "c2n232i";
desc = "serial port banging, reset=dtr sck=!rts mosi=!txd miso=!cts";
type = "serbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
reset = 4;
sck = ~7;
mosi = ~3;
miso = ~8;
;
#------------------------------------------------------------
# jtag2updi
#------------------------------------------------------------
# JTAG2UPDI
# https://github.com/ElTangas/jtag2updi
programmer
id = "jtag2updi";
desc = "JTAGv2 to UPDI bridge";
type = "jtagmkii_updi";
prog_modes = PM_UPDI;
connection_type = serial;
baudrate = 115200;
hvupdi_support = 1;
;
#
# PART DEFINITIONS
#
#------------------------------------------------------------
# ATtiny11
#------------------------------------------------------------
# This is an HVSP-only device.
part
desc = "ATtiny11";
id = "t11";
prog_modes = PM_HVSP;
mcuid = 8;
n_interrupts = 5;
stk500_devcode = 0x11;
chip_erase_delay = 20000;
signature = 0x1e 0x90 0x04;
serial = no;
timeout = 200;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
memory "eeprom"
size = 64;
delay = 5;
blocksize = 64;
readsize = 256;
;
memory "flash"
size = 1024;
delay = 3;
blocksize = 128;
readsize = 256;
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
;
memory "signature"
size = 3;
;
memory "calibration"
size = 1;
;
;
#------------------------------------------------------------
# ATtiny12
#------------------------------------------------------------
part
desc = "ATtiny12";
id = "t12";
prog_modes = PM_ISP | PM_HVSP;
mcuid = 9;
n_interrupts = 6;
stk500_devcode = 0x12;
avr910_devcode = 0x55;
chip_erase_delay = 20000;
signature = 0x1e 0x90 0x05;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 4;
delay = 8;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xxaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
;
memory "flash"
size = 1024;
min_write_delay = 4500;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 4;
delay = 5;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--oooo.oooo";
write = "1010.1100--101x.xxxx--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny13
#------------------------------------------------------------
part
desc = "ATtiny13";
id = "t13";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 10;
n_interrupts = 10;
stk500_devcode = 0x14;
chip_erase_delay = 4000;
signature = 0x1e 0x90 0x07;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
flash_instr = 0xb4, 0x0e, 0x1e;
eeprom_instr =
0xbb, 0xfe, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x0e, 0xb4, 0x0e, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayus = 90;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
ocdrev = 0;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4000;
readback = 0xff 0xff;
mode = 65;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xxaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xxaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 1024;
page_size = 32;
num_pages = 32;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.000a--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.000a--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--0000.000a--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny13A
#------------------------------------------------------------
part parent "t13"
desc = "ATtiny13A";
id = "t13a";
mcuid = 11;
;
#------------------------------------------------------------
# ATtiny15
#------------------------------------------------------------
part
desc = "ATtiny15";
id = "t15";
prog_modes = PM_ISP | PM_HVSP;
mcuid = 12;
n_interrupts = 9;
stk500_devcode = 0x13;
avr910_devcode = 0x56;
chip_erase_delay = 8200;
signature = 0x1e 0x90 0x06;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
latchcycles = 16;
togglevtg = 1;
poweroffdelay = 25;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
hvspcmdexedelay = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
min_write_delay = 8200;
max_write_delay = 8200;
readback = 0xff 0xff;
mode = 4;
delay = 10;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xxaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
;
memory "flash"
size = 1024;
min_write_delay = 4100;
max_write_delay = 4100;
readback = 0xff 0xff;
mode = 4;
delay = 5;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--oooo.xxoo";
write = "1010.1100--101x.xxxx--xxxx.xxxx--iiii.11ii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s1200
#------------------------------------------------------------
part
desc = "AT90S1200";
id = "1200";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 183;
n_interrupts = 4;
stk500_devcode = 0x33;
avr910_devcode = 0x13;
chip_erase_delay = 20000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x90 0x01;
is_at90s1200 = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 1;
pollvalue = 0xff;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x00 0xff;
mode = 4;
delay = 20;
blocksize = 32;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xxaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
;
memory "flash"
size = 1024;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 2;
delay = 15;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s4414
#------------------------------------------------------------
part
desc = "AT90S4414";
id = "4414";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 190;
n_interrupts = 13;
stk500_devcode = 0x50;
avr910_devcode = 0x28;
chip_erase_delay = 20000;
signature = 0x1e 0x92 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x80 0x7f;
mode = 4;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x7f 0x7f;
mode = 4;
delay = 12;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s2313
#------------------------------------------------------------
part
desc = "AT90S2313";
id = "2313";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 186;
n_interrupts = 11;
stk500_devcode = 0x40;
avr910_devcode = 0x20;
chip_erase_delay = 20000;
signature = 0x1e 0x91 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x80 0x7f;
mode = 4;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 2048;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x7f 0x7f;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
write = "1010.1100--111x.xiix--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s2333
#------------------------------------------------------------
part
##### WARNING: No XML file for device 'AT90S2333'! #####
desc = "AT90S2333";
id = "2333";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 188;
n_interrupts = 14;
stk500_devcode = 0x42;
avr910_devcode = 0x34;
chip_erase_delay = 20000;
signature = 0x1e 0x91 0x05;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x00 0xff;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
pwroff_after_write = yes;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--xxoo.oooo";
write = "1010.1100--101i.iiii--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s2343 (also AT90s2323 and ATtiny22)
#------------------------------------------------------------
part
desc = "AT90S2343";
id = "2343";
prog_modes = PM_SPM | PM_ISP | PM_HVSP;
mcuid = 189;
n_interrupts = 3;
stk500_devcode = 0x43;
avr910_devcode = 0x4c;
chip_erase_delay = 18000;
signature = 0x1e 0x91 0x03;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
latchcycles = 1;
poweroffdelay = 25;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x00 0xff;
mode = 4;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--0000.0000--xaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.0000--xaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 128;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--ooox.xxxo";
write = "1010.1100--1011.111i--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--ooox.xxxo";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s4433
#------------------------------------------------------------
part
desc = "AT90S4433";
id = "4433";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 191;
n_interrupts = 14;
stk500_devcode = 0x51;
avr910_devcode = 0x30;
chip_erase_delay = 20000;
signature = 0x1e 0x92 0x03;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x00 0xff;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
pwroff_after_write = yes;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--xxoo.oooo";
write = "1010.1100--101i.iiii--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s4434
#------------------------------------------------------------
part
##### WARNING: No XML file for device 'AT90S4434'! #####
desc = "AT90S4434";
id = "4434";
prog_modes = PM_SPM | PM_ISP;
mcuid = 192;
n_interrupts = 17;
stk500_devcode = 0x52;
avr910_devcode = 0x6c;
chip_erase_delay = 20000;
signature = 0x1e 0x92 0x02;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x00 0xff;
read = "1010.0000--xxxx.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
read_lo = "0010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--xxoo.oooo";
write = "1010.1100--101i.iiii--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s8515
#------------------------------------------------------------
part
desc = "AT90S8515";
id = "8515";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 193;
n_interrupts = 13;
stk500_devcode = 0x60;
avr910_devcode = 0x38;
chip_erase_delay = 20000;
signature = 0x1e 0x93 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x80 0x7f;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 8192;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x7f 0x7f;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90s8535
#------------------------------------------------------------
part
desc = "AT90S8535";
id = "8535";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 195;
n_interrupts = 17;
stk500_devcode = 0x61;
avr910_devcode = 0x68;
chip_erase_delay = 20000;
signature = 0x1e 0x93 0x03;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x00 0xff;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 8192;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 4;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxxo";
write = "1010.1100--1011.111i--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--ooxx.xxxx";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega103
#------------------------------------------------------------
part
desc = "ATmega103";
id = "m103";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 84;
n_interrupts = 24;
stk500_devcode = 0xb1;
avr910_devcode = 0x41;
chip_erase_delay = 112000;
signature = 0x1e 0x97 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x8e, 0x9e, 0x2e, 0x3e, 0xae, 0xbe,
0x4e, 0x5e, 0xce, 0xde, 0x6e, 0x7e, 0xee, 0xde,
0x66, 0x76, 0xe6, 0xf6, 0x6a, 0x7a, 0xea, 0x7a,
0x7f, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 10;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x80 0x7f;
mode = 4;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 22000;
max_write_delay = 56000;
readback = 0xff 0xff;
mode = 17;
delay = 70;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "fuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--xxox.o1oo";
write = "1010.1100--1011.i1ii--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega64
#------------------------------------------------------------
part
desc = "ATmega64";
id = "m64";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 72;
n_interrupts = 35;
stk500_devcode = 0xa0;
avr910_devcode = 0x45;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x02;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x22;
spmcr = 0x68;
ocdrev = 2;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 4;
delay = 20;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--xaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega64A
#------------------------------------------------------------
part parent "m64"
desc = "ATmega64A";
id = "m64a";
mcuid = 73;
;
#------------------------------------------------------------
# ATmega128
#------------------------------------------------------------
part
desc = "ATmega128";
id = "m128";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 85;
n_interrupts = 35;
stk500_devcode = 0xb2;
avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x97 0x02;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x22;
rampz = 0x3b;
spmcr = 0x68;
ocdrev = 1;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 4;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega128A
#------------------------------------------------------------
part parent "m128"
desc = "ATmega128A";
id = "m128a";
mcuid = 86;
;
#------------------------------------------------------------
# AT90CAN128
#------------------------------------------------------------
part
desc = "AT90CAN128";
id = "c128";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 176;
n_interrupts = 37;
stk500_devcode = 0xb3;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
# avr910_devcode = 0x43;
signature = 0x1e 0x97 0x81;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 8;
readsize = 256;
read = "1010.0000--000x.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90CAN64
#------------------------------------------------------------
part
desc = "AT90CAN64";
id = "c64";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 172;
n_interrupts = 37;
stk500_devcode = 0xb3;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
# avr910_devcode = 0x43;
signature = 0x1e 0x96 0x81;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 8;
readsize = 256;
read = "1010.0000--000x.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90CAN32
#------------------------------------------------------------
part
desc = "AT90CAN32";
id = "c32";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 171;
n_interrupts = 37;
stk500_devcode = 0xb3;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
# avr910_devcode = 0x43;
signature = 0x1e 0x95 0x81;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 8;
readsize = 256;
read = "1010.0000--000x.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 256;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega16
#------------------------------------------------------------
part
desc = "ATmega16";
id = "m16";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 49;
n_interrupts = 21;
stk500_devcode = 0x82;
avr910_devcode = 0x74;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x03;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
progmodedelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 2;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 4;
delay = 10;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--000x.xxxx--0000.00aa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega16A
#------------------------------------------------------------
part parent "m16"
desc = "ATmega16A";
id = "m16a";
mcuid = 50;
;
#------------------------------------------------------------
# ATmega324P
#------------------------------------------------------------
part
desc = "ATmega324P";
id = "m324p";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 111;
n_interrupts = 31;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 55000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x08;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega164P
#------------------------------------------------------------
part parent "m324p"
desc = "ATmega164P";
id = "m164p";
mcuid = 93;
signature = 0x1e 0x94 0x0a;
memory "eeprom"
size = 512;
;
memory "flash"
size = 0x4000;
num_pages = 128;
;
;
#------------------------------------------------------------
# ATmega164PA
#------------------------------------------------------------
part parent "m164p"
desc = "ATmega164PA";
id = "m164pa";
mcuid = 94;
;
#------------------------------------------------------------
# ATmega164A
#------------------------------------------------------------
part parent "m164p"
desc = "ATmega164A";
id = "m164a";
mcuid = 92;
signature = 0x1e 0x94 0x0f;
;
#------------------------------------------------------------
# ATmega324PB
#------------------------------------------------------------
part parent "m324p"
desc = "ATmega324PB";
id = "m324pb";
mcuid = 113;
signature = 0x1e 0x95 0x17;
;
#------------------------------------------------------------
# ATmega324PA
#------------------------------------------------------------
part parent "m324p"
desc = "ATmega324PA";
id = "m324pa";
mcuid = 112;
signature = 0x1e 0x95 0x11;
;
#------------------------------------------------------------
# ATmega324A
#------------------------------------------------------------
part parent "m324p"
desc = "ATmega324A";
id = "m324a";
mcuid = 110;
signature = 0x1e 0x95 0x15;
;
#------------------------------------------------------------
# ATmega644
#------------------------------------------------------------
part
desc = "ATmega644";
id = "m644";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 127;
n_interrupts = 28;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 55000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x09;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega644A
#------------------------------------------------------------
part parent "m644"
desc = "ATmega644A";
id = "m644a";
mcuid = 128;
n_interrupts = 31;
;
#------------------------------------------------------------
# ATmega644P
#------------------------------------------------------------
part parent "m644"
desc = "ATmega644P";
id = "m644p";
mcuid = 129;
n_interrupts = 31;
signature = 0x1e 0x96 0x0a;
;
#------------------------------------------------------------
# ATmega644PA
#------------------------------------------------------------
part parent "m644"
desc = "ATmega644PA";
id = "m644pa";
mcuid = 130;
n_interrupts = 31;
signature = 0x1e 0x96 0x0a;
;
#------------------------------------------------------------
# ATmega1284
#------------------------------------------------------------
part
desc = "ATmega1284";
id = "m1284";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 140;
n_interrupts = 35;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 55000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x97 0x06;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
latchcycles = 6;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega1284P
#------------------------------------------------------------
part parent "m1284"
desc = "ATmega1284P";
id = "m1284p";
mcuid = 141;
signature = 0x1e 0x97 0x05;
;
#------------------------------------------------------------
# ATmega162
#------------------------------------------------------------
part
desc = "ATmega162";
id = "m162";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 90;
n_interrupts = 28;
stk500_devcode = 0x83;
avr910_devcode = 0x63;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x04;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x04;
spmcr = 0x57;
ocdrev = 2;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--00xx.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--00xx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--00xx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega163
#------------------------------------------------------------
part
desc = "ATmega163";
id = "m163";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 91;
n_interrupts = 18;
stk500_devcode = 0x81;
avr910_devcode = 0x64;
chip_erase_delay = 32000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x02;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepolltimeout = 30;
programfusepolltimeout = 2;
programlockpolltimeout = 2;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 4000;
max_write_delay = 4000;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 16000;
max_write_delay = 16000;
readback = 0xff 0xff;
mode = 17;
delay = 20;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.0000--xxxx.xxxx--ooxx.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--ii11.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.1000--xxxx.xxxx--xxxx.1ooo";
write = "1010.1100--1010.1000--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.0xxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega169
#------------------------------------------------------------
part
desc = "ATmega169";
id = "m169";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 104;
n_interrupts = 23;
stk500_devcode = 0x85;
avr910_devcode = 0x78;
chip_erase_delay = 9000;
signature = 0x1e 0x94 0x05;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 2;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega169A
#------------------------------------------------------------
part parent "m169"
desc = "ATmega169A";
id = "m169a";
mcuid = 105;
signature = 0x1e 0x94 0x11;
reset = io;
;
#------------------------------------------------------------
# ATmega169P
#------------------------------------------------------------
part parent "m169"
desc = "ATmega169P";
id = "m169p";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 106;
reset = io;
;
#------------------------------------------------------------
# ATmega169PA
#------------------------------------------------------------
part parent "m169"
desc = "ATmega169PA";
id = "m169pa";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 107;
reset = io;
;
#------------------------------------------------------------
# ATmega329
#------------------------------------------------------------
part
desc = "ATmega329";
id = "m329";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 121;
n_interrupts = 23;
# stk500_devcode = 0x85; # no STK500 support, only STK500v2
# avr910_devcode = 0x?; # try the ATmega169 one:
avr910_devcode = 0x75;
chip_erase_delay = 9000;
signature = 0x1e 0x95 0x03;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--xaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega329A
#------------------------------------------------------------
part parent "m329"
desc = "ATmega329A";
id = "m329a";
mcuid = 122;
;
#------------------------------------------------------------
# ATmega329P
#------------------------------------------------------------
part parent "m329"
desc = "ATmega329P";
id = "m329p";
mcuid = 123;
signature = 0x1e 0x95 0x0b;
;
#------------------------------------------------------------
# ATmega329PA
#------------------------------------------------------------
part parent "m329"
desc = "ATmega329PA";
id = "m329pa";
mcuid = 124;
signature = 0x1e 0x95 0x0b;
;
#------------------------------------------------------------
# ATmega3290
#------------------------------------------------------------
part parent "m329"
desc = "ATmega3290";
id = "m3290";
mcuid = 150;
n_interrupts = 25;
signature = 0x1e 0x95 0x04;
;
#------------------------------------------------------------
# ATmega3290A
#------------------------------------------------------------
part parent "m329"
desc = "ATmega3290A";
id = "m3290a";
mcuid = 151;
n_interrupts = 25;
signature = 0x1e 0x95 0x04;
;
#------------------------------------------------------------
# ATmega3290P
#------------------------------------------------------------
part parent "m329"
desc = "ATmega3290P";
id = "m3290p";
mcuid = 152;
n_interrupts = 25;
signature = 0x1e 0x95 0x0c;
;
#------------------------------------------------------------
# ATmega3290PA
#------------------------------------------------------------
part parent "m329"
desc = "ATmega3290PA";
id = "m3290pa";
mcuid = 153;
n_interrupts = 25;
signature = 0x1e 0x95 0x0c;
;
#------------------------------------------------------------
# ATmega649
#------------------------------------------------------------
part
desc = "ATmega649";
id = "m649";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 135;
n_interrupts = 23;
# stk500_devcode = 0x85; # no STK500 support, only STK500v2
# avr910_devcode = 0x?; # try the ATmega169 one:
avr910_devcode = 0x75;
chip_erase_delay = 9000;
signature = 0x1e 0x96 0x03;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega649A
#------------------------------------------------------------
part parent "m649"
desc = "ATmega649A";
id = "m649a";
mcuid = 136;
;
#------------------------------------------------------------
# ATmega649P
#------------------------------------------------------------
part parent "m649"
desc = "ATmega649P";
id = "m649p";
mcuid = 137;
signature = 0x1e 0x96 0x0b;
;
#------------------------------------------------------------
# ATmega6490
#------------------------------------------------------------
part parent "m649"
desc = "ATmega6490";
id = "m6490";
mcuid = 157;
n_interrupts = 25;
signature = 0x1e 0x96 0x04;
;
#------------------------------------------------------------
# ATmega6490A
#------------------------------------------------------------
part parent "m649"
desc = "ATmega6490A";
id = "m6490a";
mcuid = 158;
n_interrupts = 25;
signature = 0x1e 0x96 0x04;
;
#------------------------------------------------------------
# ATmega6490P
#------------------------------------------------------------
part parent "m649"
desc = "ATmega6490P";
id = "m6490p";
mcuid = 159;
n_interrupts = 25;
signature = 0x1e 0x96 0x0c;
;
#------------------------------------------------------------
# ATmega32
#------------------------------------------------------------
part
desc = "ATmega32";
id = "m32";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 58;
n_interrupts = 21;
stk500_devcode = 0x91;
avr910_devcode = 0x72;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x02;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 2;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 4;
delay = 10;
blocksize = 64;
readsize = 256;
read = "1010.0000--00xx.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--00xx.xxxx--0000.00aa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega161
#------------------------------------------------------------
part
desc = "ATmega161";
id = "m161";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 89;
n_interrupts = 21;
stk500_devcode = 0x80;
avr910_devcode = 0x60;
chip_erase_delay = 28000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepolltimeout = 30;
programfusepolltimeout = 2;
programlockpolltimeout = 2;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 3400;
max_write_delay = 3400;
readback = 0xff 0xff;
mode = 4;
delay = 5;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 14000;
max_write_delay = 14000;
readback = 0xff 0xff;
mode = 33;
delay = 16;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "fuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--xoxo.oooo";
write = "1010.1100--101x.xxxx--xxxx.xxxx--1i1i.iiii";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega32A
#------------------------------------------------------------
part parent "m32"
desc = "ATmega32A";
id = "m32a";
mcuid = 59;
;
#------------------------------------------------------------
# ATmega8
#------------------------------------------------------------
part
desc = "ATmega8";
id = "m8";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 45;
n_interrupts = 19;
stk500_devcode = 0x70;
avr910_devcode = 0x76;
chip_erase_delay = 10000;
pagel = 0xd7;
bs2 = 0xc2;
signature = 0x1e 0x93 0x07;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 4;
delay = 20;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0x00;
mode = 33;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--00xx.xxxx--0000.00aa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega8A
#------------------------------------------------------------
part parent "m8"
desc = "ATmega8A";
id = "m8a";
mcuid = 46;
;
#------------------------------------------------------------
# ATmega8515
#------------------------------------------------------------
part
desc = "ATmega8515";
id = "m8515";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 160;
n_interrupts = 17;
stk500_devcode = 0x63;
avr910_devcode = 0x3a;
chip_erase_delay = 9000;
signature = 0x1e 0x93 0x06;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 4;
delay = 20;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--00xx.xxxx--0000.00aa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega8535
#------------------------------------------------------------
part
desc = "ATmega8535";
id = "m8535";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 161;
n_interrupts = 21;
stk500_devcode = 0x64;
avr910_devcode = 0x69;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x93 0x08;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 4;
delay = 20;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--00xx.xxxx--0000.00aa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny26
#------------------------------------------------------------
part
desc = "ATtiny26";
id = "t26";
prog_modes = PM_ISP | PM_HVPP;
mcuid = 17;
n_interrupts = 12;
stk500_devcode = 0x21;
avr910_devcode = 0x5e;
chip_erase_delay = 9000;
pagel = 0xb3;
bs2 = 0xb2;
signature = 0x1e 0x91 0x09;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 4;
delay = 10;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 33;
delay = 6;
blocksize = 16;
readsize = 256;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--xxxx.xxaa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--xxxi.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxoo";
write = "1010.1100--1111.11ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny261
#------------------------------------------------------------
part
desc = "ATtiny261";
id = "t261";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 30;
n_interrupts = 19;
chip_erase_delay = 4000;
pagel = 0xb3;
bs2 = 0xb2;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x91 0x0c;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb4, 0x00, 0x10;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x00, 0xb4, 0x00, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
page_size = 4;
num_pages = 32;
min_write_delay = 4000;
max_write_delay = 4000;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--xxxx.xxaa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxoo";
write = "1010.1100--1111.11ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny261A
#------------------------------------------------------------
part parent "t261"
desc = "ATtiny261A";
id = "t261a";
mcuid = 31;
;
#------------------------------------------------------------
# ATtiny461
#------------------------------------------------------------
part
desc = "ATtiny461";
id = "t461";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 33;
n_interrupts = 19;
chip_erase_delay = 4000;
pagel = 0xb3;
bs2 = 0xb2;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x92 0x08;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb4, 0x00, 0x10;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x00, 0xb4, 0x00, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
num_pages = 64;
min_write_delay = 4000;
max_write_delay = 4000;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxx.xaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxoo";
write = "1010.1100--1111.11ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny461A
#------------------------------------------------------------
part parent "t461"
desc = "ATtiny461A";
id = "t461a";
mcuid = 34;
;
#------------------------------------------------------------
# ATtiny861
#------------------------------------------------------------
part
desc = "ATtiny861";
id = "t861";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 38;
n_interrupts = 19;
chip_erase_delay = 4000;
pagel = 0xb3;
bs2 = 0xb2;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x93 0x0d;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb4, 0x00, 0x10;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x00, 0xb4, 0x00, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 4000;
max_write_delay = 4000;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxx.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxoo";
write = "1010.1100--1111.11ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny861A
#------------------------------------------------------------
part parent "t861"
desc = "ATtiny861A";
id = "t861a";
mcuid = 39;
;
#------------------------------------------------------------
# ATtiny28
#------------------------------------------------------------
# This is an HVPP-only device.
part
desc = "ATtiny28";
id = "t28";
prog_modes = PM_HVPP;
mcuid = 18;
n_interrupts = 6;
stk500_devcode = 0x22;
avr910_devcode = 0x5c;
signature = 0x1e 0x91 0x07;
serial = no;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
memory "flash"
size = 2048;
page_size = 2;
delay = 5;
readsize = 256;
;
memory "fuse"
size = 1;
;
memory "lock"
size = 1;
;
memory "signature"
size = 3;
;
memory "calibration"
size = 1;
;
;
#------------------------------------------------------------
# ATmega48
#------------------------------------------------------------
part
desc = "ATmega48";
id = "m48";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 67;
n_interrupts = 26;
stk500_devcode = 0x59;
chip_erase_delay = 45000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x92 0x05;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega48A
#------------------------------------------------------------
part parent "m48"
desc = "ATmega48A";
id = "m48a";
mcuid = 68;
;
#------------------------------------------------------------
# ATmega48P
#------------------------------------------------------------
part parent "m48"
desc = "ATmega48P";
id = "m48p";
mcuid = 69;
signature = 0x1e 0x92 0x0a;
;
#------------------------------------------------------------
# ATmega48PA
#------------------------------------------------------------
part parent "m48"
desc = "ATmega48PA";
id = "m48pa";
mcuid = 70;
signature = 0x1e 0x92 0x0a;
;
#------------------------------------------------------------
# ATmega48PB
#------------------------------------------------------------
part parent "m48"
desc = "ATmega48PB";
id = "m48pb";
mcuid = 71;
n_interrupts = 27;
chip_erase_delay = 10500;
signature = 0x1e 0x92 0x10;
;
#------------------------------------------------------------
# ATmega88
#------------------------------------------------------------
part
desc = "ATmega88";
id = "m88";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 79;
n_interrupts = 26;
stk500_devcode = 0x73;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x93 0x0a;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega88A
#------------------------------------------------------------
part parent "m88"
desc = "ATmega88A";
id = "m88a";
mcuid = 80;
;
#------------------------------------------------------------
# ATmega88P
#------------------------------------------------------------
part parent "m88"
desc = "ATmega88P";
id = "m88p";
mcuid = 81;
signature = 0x1e 0x93 0x0f;
;
#------------------------------------------------------------
# ATmega88PA
#------------------------------------------------------------
part parent "m88"
desc = "ATmega88PA";
id = "m88pa";
mcuid = 82;
signature = 0x1e 0x93 0x0f;
;
#------------------------------------------------------------
# ATmega88PB
#------------------------------------------------------------
part parent "m88"
desc = "ATmega88PB";
id = "m88pb";
mcuid = 83;
n_interrupts = 27;
chip_erase_delay = 10500;
signature = 0x1e 0x93 0x16;
;
#------------------------------------------------------------
# ATmega168
#------------------------------------------------------------
part
desc = "ATmega168";
id = "m168";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 99;
n_interrupts = 26;
stk500_devcode = 0x86;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x94 0x06;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--000a.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega168A
#------------------------------------------------------------
part parent "m168"
desc = "ATmega168A";
id = "m168a";
mcuid = 100;
;
#------------------------------------------------------------
# ATmega168P
#------------------------------------------------------------
part parent "m168"
desc = "ATmega168P";
id = "m168p";
mcuid = 101;
signature = 0x1e 0x94 0x0b;
;
#------------------------------------------------------------
# ATmega168PA
#------------------------------------------------------------
part parent "m168"
desc = "ATmega168PA";
id = "m168pa";
mcuid = 102;
signature = 0x1e 0x94 0x0b;
;
#------------------------------------------------------------
# ATmega168PB
#------------------------------------------------------------
part parent "m168"
desc = "ATmega168PB";
id = "m168pb";
mcuid = 103;
n_interrupts = 27;
chip_erase_delay = 10500;
signature = 0x1e 0x94 0x15;
;
#------------------------------------------------------------
# ATtiny828
#------------------------------------------------------------
part
desc = "ATtiny828";
id = "t828";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 35;
n_interrupts = 26;
stk500_devcode = 0x86;
chip_erase_delay = 15000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x93 0x14;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
readback = 0xff 0xff;
mode = 65;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--111i.iiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny828R
#------------------------------------------------------------
part parent "t828"
desc = "ATtiny828R";
id = "t828r";
mcuid = 36;
;
#------------------------------------------------------------
# ATtiny87
#------------------------------------------------------------
part
desc = "ATtiny87";
id = "t87";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 27;
n_interrupts = 20;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 15000;
signature = 0x1e 0x93 0x87;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x06, 0x16, 0x46, 0x56, 0x0a, 0x1a, 0x4a, 0x5a,
0x1e, 0x7c, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 20;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
spmcr = 0x57;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 128;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny87 has Signature Bytes: 0x1E 0x93 0x87.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny167
#------------------------------------------------------------
part
desc = "ATtiny167";
id = "t167";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 29;
n_interrupts = 20;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = 0x??;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 15000;
signature = 0x1e 0x94 0x87;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x06, 0x16, 0x46, 0x56, 0x0a, 0x1a, 0x4a, 0x5a,
0x1e, 0x7c, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 20;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
spmcr = 0x57;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--000a.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny167 has Signature Bytes: 0x1E 0x94 0x87.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny48
#------------------------------------------------------------
part
desc = "ATtiny48";
id = "t48";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 23;
n_interrupts = 20;
stk500_devcode = 0x73;
chip_erase_delay = 15000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x92 0x09;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 64;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.111i";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny88
#------------------------------------------------------------
part
desc = "ATtiny88";
id = "t88";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 28;
n_interrupts = 20;
stk500_devcode = 0x73;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x93 0x11;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 64;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega328
#------------------------------------------------------------
part
desc = "ATmega328";
id = "m328";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 118;
n_interrupts = 26;
stk500_devcode = 0x86;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x95 0x14;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
readback = 0xff 0xff;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega328P
#------------------------------------------------------------
part parent "m328"
desc = "ATmega328P";
id = "m328p";
mcuid = 119;
signature = 0x1e 0x95 0x0f;
;
#------------------------------------------------------------
# ATmega328PB
#------------------------------------------------------------
part parent "m328"
desc = "ATmega328PB";
id = "m328pb";
mcuid = 120;
n_interrupts = 45;
chip_erase_delay = 10500;
signature = 0x1e 0x95 0x16;
memory "efuse"
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
;
#------------------------------------------------------------
# ATmega32m1
#------------------------------------------------------------
part parent "m328"
desc = "ATmega32M1";
id = "m32m1";
mcuid = 63;
n_interrupts = 31;
bs2 = 0xe2;
# stk500_devcode = 0x??;
# avr910_devcode = 0x??;
signature = 0x1e 0x95 0x84;
memory "efuse"
write = "1010.1100--1010.0100--xxxx.xxxx--xxii.iiii";
;
;
#------------------------------------------------------------
# ATmega64m1
#------------------------------------------------------------
part parent "m328"
desc = "ATmega64M1";
id = "m64m1";
mcuid = 76;
n_interrupts = 31;
bs2 = 0xe2;
# stk500_devcode = 0x??;
# avr910_devcode = 0x??;
signature = 0x1e 0x96 0x84;
memory "eeprom"
size = 2048;
page_size = 8;
read = "1010.0000--000x.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
size = 0x10000;
page_size = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "efuse"
write = "1010.1100--1010.0100--xxxx.xxxx--xxii.iiii";
;
;
#------------------------------------------------------------
# ATtiny2313
#------------------------------------------------------------
part
desc = "ATtiny2313";
id = "t2313";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 42;
n_interrupts = 19;
stk500_devcode = 0x23;
# Use the ATtiny26 devcode:
avr910_devcode = 0x5e;
chip_erase_delay = 9000;
pagel = 0xd4;
bs2 = 0xd6;
signature = 0x1e 0x91 0x0a;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x26, 0x36, 0x66, 0x76, 0x2a, 0x3a, 0x6a, 0x7a,
0x2e, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb2, 0x0f, 0x1f;
eeprom_instr =
0xbb, 0xfe, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xba, 0x0f, 0xb2, 0x0f, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 0;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.00aa--aaaa.aaaa--oooo.oooo";
# The information in the data sheet of April/2004 is wrong, this works:
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
# The information in the data sheet of April/2004 is wrong, this works:
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
# The information in the data sheet of April/2004 is wrong, this works:
writepage = "0100.1100--0000.00aa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny2313 has Signature Bytes: 0x1E 0x91 0x0A.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
# The Tiny2313 has calibration data for both 4 MHz and 8 MHz.
# The information in the data sheet of April/2004 is wrong, this works:
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny2313A
#------------------------------------------------------------
part parent "t2313"
desc = "ATtiny2313A";
id = "t2313a";
mcuid = 43;
n_interrupts = 21;
;
#------------------------------------------------------------
# ATtiny4313
#------------------------------------------------------------
part
desc = "ATtiny4313";
id = "t4313";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 44;
n_interrupts = 21;
stk500_devcode = 0x23;
# Use the ATtiny26 devcode:
avr910_devcode = 0x5e;
chip_erase_delay = 9000;
pagel = 0xd4;
bs2 = 0xd6;
signature = 0x1e 0x92 0x0d;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x26, 0x36, 0x66, 0x76, 0x2a, 0x3a, 0x6a, 0x7a,
0x2e, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb2, 0x0f, 0x1f;
eeprom_instr =
0xbb, 0xfe, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xba, 0x0f, 0xb2, 0x0f, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 0;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny4313 has Signature Bytes: 0x1E 0x92 0x0D.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90PWM2
#------------------------------------------------------------
part
desc = "AT90PWM2";
id = "pwm2";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 167;
n_interrupts = 32;
stk500_devcode = 0x65;
chip_erase_delay = 9000;
pagel = 0xd8;
bs2 = 0xe2;
# avr910_devcode = ?;
signature = 0x1e 0x93 0x81;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# AT90PWM2 has Signature Bytes: 0x1E 0x93 0x81.
memory "signature"
size = 3;
read = "0011.0000--00xx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90PWM3
#------------------------------------------------------------
# Completely identical to AT90PWM2 (including the signature!)
part parent "pwm2"
desc = "AT90PWM3";
id = "pwm3";
mcuid = 169;
;
#------------------------------------------------------------
# AT90PWM2B
#------------------------------------------------------------
# Same as AT90PWM2 but different signature.
part parent "pwm2"
desc = "AT90PWM2B";
id = "pwm2b";
mcuid = 168;
signature = 0x1e 0x93 0x83;
ocdrev = 1;
;
#------------------------------------------------------------
# AT90PWM3B
#------------------------------------------------------------
# Completely identical to AT90PWM2B (including the signature!)
part parent "pwm2b"
desc = "AT90PWM3B";
id = "pwm3b";
mcuid = 170;
;
#------------------------------------------------------------
# AT90PWM316
#------------------------------------------------------------
# Similar to AT90PWM3B, but with 16 kiB flash, 512 B EEPROM, and 1024 B SRAM.
part parent "pwm3b"
desc = "AT90PWM316";
id = "pwm316";
mcuid = 180;
signature = 0x1e 0x94 0x83;
memory "flash"
size = 0x4000;
page_size = 128;
mode = 33;
blocksize = 128;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
;
#------------------------------------------------------------
# AT90PWM216
#------------------------------------------------------------
# Completely identical to AT90PWM316 (including the signature!)
part parent "pwm316"
desc = "AT90PWM216";
id = "pwm216";
mcuid = 179;
;
#------------------------------------------------------------
# ATtiny25
#------------------------------------------------------------
part
desc = "ATtiny25";
id = "t25";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 16;
n_interrupts = 15;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x91 0x08;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
flash_instr = 0xb4, 0x02, 0x12;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x02, 0xb4, 0x02, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.00aa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--0000.00aa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny25 has Signature Bytes: 0x1E 0x91 0x08.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny45
#------------------------------------------------------------
part
desc = "ATtiny45";
id = "t45";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 22;
n_interrupts = 15;
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x92 0x06;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
flash_instr = 0xb4, 0x02, 0x12;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x02, 0xb4, 0x02, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny45 has Signature Bytes: 0x1E 0x92 0x08. (Data sheet 2586C-AVR-06/05 (doc2586.pdf) indicates otherwise!)
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny85
#------------------------------------------------------------
part
desc = "ATtiny85";
id = "t85";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 26;
n_interrupts = 15;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x93 0x0b;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
flash_instr = 0xb4, 0x02, 0x12;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x02, 0xb4, 0x02, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny85 has Signature Bytes: 0x1E 0x93 0x08.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega640
#------------------------------------------------------------
# Almost same as ATmega1280, except for different memory sizes
part
desc = "ATmega640";
id = "m640";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 126;
n_interrupts = 57;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x08;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega1280
#------------------------------------------------------------
part
desc = "ATmega1280";
id = "m1280";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 138;
n_interrupts = 57;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x97 0x03;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega1281
#------------------------------------------------------------
# Identical to ATmega1280
part parent "m1280"
desc = "ATmega1281";
id = "m1281";
mcuid = 139;
n_interrupts = 51;
signature = 0x1e 0x97 0x04;
;
#------------------------------------------------------------
# ATmega2560
#------------------------------------------------------------
part
desc = "ATmega2560";
id = "m2560";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 143;
n_interrupts = 57;
stk500_devcode = 0xb2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x98 0x01;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
ocdrev = 4;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x40000;
page_size = 256;
num_pages = 1024;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
load_ext_addr = "0100.1101--0000.0000--0000.000a--0000.0000";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega2561
#------------------------------------------------------------
part parent "m2560"
desc = "ATmega2561";
id = "m2561";
mcuid = 144;
n_interrupts = 51;
signature = 0x1e 0x98 0x02;
;
#------------------------------------------------------------
# ATmega128RFA1
#------------------------------------------------------------
# Identical to ATmega2561 but half the ROM
part parent "m2561"
desc = "ATmega128RFA1";
id = "m128rfa1";
mcuid = 87;
n_interrupts = 72;
chip_erase_delay = 55000;
bs2 = 0xe2;
signature = 0x1e 0xa7 0x01;
ocdrev = 3;
memory "flash"
size = 0x20000;
num_pages = 512;
min_write_delay = 50000;
max_write_delay = 50000;
delay = 20;
load_ext_addr = NULL;
;
;
#------------------------------------------------------------
# ATmega256RFR2
#------------------------------------------------------------
part parent "m2561"
desc = "ATmega256RFR2";
id = "m256rfr2";
mcuid = 108;
n_interrupts = 77;
chip_erase_delay = 18500;
bs2 = 0xe2;
signature = 0x1e 0xa8 0x02;
memory "eeprom"
size = 8192;
min_write_delay = 13000;
max_write_delay = 13000;
read = "1010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxa.aaaa--aaaa.aaaa--iiii.iiii";
writepage = "1100.0010--00xa.aaaa--aaaa.a000--xxxx.xxxx";
;
;
#------------------------------------------------------------
# ATmega128RFR2
#------------------------------------------------------------
part parent "m128rfa1"
desc = "ATmega128RFR2";
id = "m128rfr2";
mcuid = 88;
n_interrupts = 77;
signature = 0x1e 0xa7 0x02;
;
#------------------------------------------------------------
# ATmega64RFR2
#------------------------------------------------------------
part parent "m128rfa1"
desc = "ATmega64RFR2";
id = "m64rfr2";
mcuid = 78;
n_interrupts = 77;
signature = 0x1e 0xa6 0x02;
memory "eeprom"
size = 2048;
min_write_delay = 13000;
max_write_delay = 13000;
read = "1010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
size = 0x10000;
num_pages = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
writepage = "0100.1100--0aaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
;
#------------------------------------------------------------
# ATmega2564RFR2
#------------------------------------------------------------
part parent "m256rfr2"
desc = "ATmega2564RFR2";
id = "m2564rfr2";
mcuid = 145;
signature = 0x1e 0xa8 0x03;
;
#------------------------------------------------------------
# ATmega1284RFR2
#------------------------------------------------------------
part parent "m128rfr2"
desc = "ATmega1284RFR2";
id = "m1284rfr2";
mcuid = 142;
signature = 0x1e 0xa7 0x03;
;
#------------------------------------------------------------
# ATmega644RFR2
#------------------------------------------------------------
part parent "m64rfr2"
desc = "ATmega644RFR2";
id = "m644rfr2";
mcuid = 131;
signature = 0x1e 0xa6 0x03;
;
#------------------------------------------------------------
# ATtiny24
#------------------------------------------------------------
part
desc = "ATtiny24";
id = "t24";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 14;
n_interrupts = 17;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x91 0x0b;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0f;
flash_instr = 0xb4, 0x07, 0x17;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x07, 0xb4, 0x07, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayus = 70;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.00aa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--0000.00aa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny24 has Signature Bytes: 0x1E 0x91 0x0B.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny24A
#------------------------------------------------------------
part parent "t24"
desc = "ATtiny24A";
id = "t24a";
mcuid = 15;
;
#------------------------------------------------------------
# ATtiny44
#------------------------------------------------------------
part
desc = "ATtiny44";
id = "t44";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 20;
n_interrupts = 17;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x92 0x07;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0f;
flash_instr = 0xb4, 0x07, 0x17;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x07, 0xb4, 0x07, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayus = 70;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny44 has Signature Bytes: 0x1E 0x92 0x07.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny44A
#------------------------------------------------------------
part parent "t44"
desc = "ATtiny44A";
id = "t44a";
mcuid = 21;
;
#------------------------------------------------------------
# ATtiny84
#------------------------------------------------------------
part
desc = "ATtiny84";
id = "t84";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 24;
n_interrupts = 17;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x93 0x0c;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0f;
flash_instr = 0xb4, 0x07, 0x17;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x07, 0xb4, 0x07, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayus = 70;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny84 has Signature Bytes: 0x1E 0x93 0x0C.
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny84A
#------------------------------------------------------------
part parent "t84"
desc = "ATtiny84A";
id = "t84a";
mcuid = 25;
;
#------------------------------------------------------------
# ATtiny441
#------------------------------------------------------------
part parent "t44"
desc = "ATtiny441";
id = "t441";
mcuid = 32;
n_interrupts = 30;
n_page_erase = 4;
signature = 0x1e 0x92 0x15;
memory "flash"
page_size = 16;
num_pages = 256;
blocksize = 16;
loadpage_lo = "0100.0000--000x.xxxx--xxxx.xaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.xaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaaa.axxx--xxxx.xxxx";
;
memory "efuse"
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
;
#------------------------------------------------------------
# ATtiny841
#------------------------------------------------------------
part parent "t84"
desc = "ATtiny841";
id = "t841";
mcuid = 37;
n_interrupts = 30;
n_page_erase = 4;
signature = 0x1e 0x93 0x15;
memory "flash"
page_size = 16;
num_pages = 512;
blocksize = 16;
loadpage_lo = "0100.0000--000x.xxxx--xxxx.xaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.xaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaaa.axxx--xxxx.xxxx";
;
memory "efuse"
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
;
#------------------------------------------------------------
# ATtiny43U
#------------------------------------------------------------
part
desc = "ATtiny43U";
id = "t43u";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 19;
n_interrupts = 16;
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 1000;
signature = 0x1e 0x92 0x0c;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x06, 0x16, 0x46, 0x56, 0x0a, 0x1a, 0x4a, 0x5a,
0x1e, 0x7c, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb4, 0x07, 0x17;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x07, 0xb4, 0x07, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 20;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
paged = yes;
size = 64;
page_size = 4;
num_pages = 16;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--00aa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--00aa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--00aa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega16u4
#------------------------------------------------------------
part
desc = "ATmega16U4";
id = "m16u4";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 57;
n_interrupts = 43;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x88;
usbpid = 0x2ff4;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--00oo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega32u4
#------------------------------------------------------------
part
desc = "ATmega32U4";
id = "m32u4";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 65;
n_interrupts = 43;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x87;
usbpid = 0x2ff4;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90USB646
#------------------------------------------------------------
part
desc = "AT90USB646";
id = "usb646";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 181;
n_interrupts = 38;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x82;
usbpid = 0x2ff9;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90USB647
#------------------------------------------------------------
# identical to AT90USB646
part parent "usb646"
desc = "AT90USB647";
id = "usb647";
mcuid = 182;
;
#------------------------------------------------------------
# AT90USB1286
#------------------------------------------------------------
part
desc = "AT90USB1286";
id = "usb1286";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 184;
n_interrupts = 38;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x97 0x82;
usbpid = 0x2ffb;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90USB1287
#------------------------------------------------------------
# identical to AT90USB1286
part parent "usb1286"
desc = "AT90USB1287";
id = "usb1287";
mcuid = 185;
;
#------------------------------------------------------------
# AT90USB162
#------------------------------------------------------------
part
desc = "AT90USB162";
id = "usb162";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 178;
n_interrupts = 29;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x94 0x82;
usbpid = 0x2ffa;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# AT90USB82
#------------------------------------------------------------
part
desc = "AT90USB82";
id = "usb82";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 174;
n_interrupts = 58;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x93 0x82;
usbpid = 0x2ff7;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 128;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega32U2
#------------------------------------------------------------
part
desc = "ATmega32U2";
id = "m32u2";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 64;
n_interrupts = 29;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x95 0x8a;
usbpid = 0x2ff0;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
num_pages = 256;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega16U2
#------------------------------------------------------------
part
desc = "ATmega16U2";
id = "m16u2";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 56;
n_interrupts = 29;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x94 0x89;
usbpid = 0x2fef;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega8U2
#------------------------------------------------------------
part
desc = "ATmega8U2";
id = "m8u2";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 48;
n_interrupts = 58;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x93 0x89;
usbpid = 0x2fee;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
ocdrev = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 128;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega165
#------------------------------------------------------------
part
desc = "ATmega165";
id = "m165";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 95;
n_interrupts = 22;
# stk500_devcode = 0x??;
# avr910_devcode = 0x??;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x10;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 65;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.00xa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.00xa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.00xa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 65;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--0000.0000--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--xxxx.xxxx--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega165A
#------------------------------------------------------------
part parent "m165"
desc = "ATmega165A";
id = "m165a";
mcuid = 96;
;
#------------------------------------------------------------
# ATmega165P
#------------------------------------------------------------
part parent "m165"
desc = "ATmega165P";
id = "m165p";
mcuid = 97;
signature = 0x1e 0x94 0x07;
;
#------------------------------------------------------------
# ATmega165PA
#------------------------------------------------------------
part parent "m165"
desc = "ATmega165PA";
id = "m165pa";
mcuid = 98;
signature = 0x1e 0x94 0x07;
;
#------------------------------------------------------------
# ATmega325
#------------------------------------------------------------
part
desc = "ATmega325";
id = "m325";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 114;
n_interrupts = 23;
# stk500_devcode = 0x??; # No STK500v1 support?
# avr910_devcode = 0x??; # Try the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x05;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--0000.0000--0000.0000";
pgm_enable = "1010.1100--0101.0011--0000.0000--0000.0000";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.00aa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.00aa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--aaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--aaaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--aaaa.aaaa--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--1010.0000--0000.0000--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--0000.0000--oooo.oooo";
write = "1010.1100--1010.1000--0000.0000--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--0000.0000--oooo.oooo";
write = "1010.1100--1010.0100--0000.0000--1111.1iii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1110.0000--0000.0000--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--0000.0000--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega325A
#------------------------------------------------------------
part parent "m325"
desc = "ATmega325A";
id = "m325a";
mcuid = 115;
;
#------------------------------------------------------------
# ATmega325P
#------------------------------------------------------------
part parent "m325"
desc = "ATmega325P";
id = "m325p";
mcuid = 116;
signature = 0x1e 0x95 0x0d;
;
#------------------------------------------------------------
# ATmega325PA
#------------------------------------------------------------
part parent "m325"
desc = "ATmega325PA";
id = "m325pa";
mcuid = 117;
n_interrupts = 22;
signature = 0x1e 0x95 0x0d;
;
#------------------------------------------------------------
# ATmega645
#------------------------------------------------------------
part
desc = "ATmega645";
id = "m645";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 132;
n_interrupts = 23;
# stk500_devcode = 0x??; # No STK500v1 support?
# avr910_devcode = 0x??; # Try the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x05;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
ocdrev = 3;
chip_erase = "1010.1100--1000.0000--0000.0000--0000.0000";
pgm_enable = "1010.1100--0101.0011--0000.0000--0000.0000";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.0aaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--0000.0aaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--aaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--aaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaaa.aaaa--0000.0000";
;
memory "lfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--1010.0000--0000.0000--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--0000.0000--oooo.oooo";
write = "1010.1100--1010.1000--0000.0000--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--0000.0000--oooo.oooo";
write = "1010.1100--1010.0100--0000.0000--1111.1iii";
;
memory "lock"
size = 1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1110.0000--0000.0000--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--0000.0000--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATmega645A
#------------------------------------------------------------
part parent "m645"
desc = "ATmega645A";
id = "m645a";
mcuid = 133;
;
#------------------------------------------------------------
# ATmega645P
#------------------------------------------------------------
part parent "m645"
desc = "ATmega645P";
id = "m645p";
mcuid = 134;
signature = 0x1e 0x96 0x0d;
;
#------------------------------------------------------------
# ATmega3250
#------------------------------------------------------------
part parent "m325"
desc = "ATmega3250";
id = "m3250";
mcuid = 146;
n_interrupts = 25;
signature = 0x1e 0x95 0x06;
;
#------------------------------------------------------------
# ATmega3250A
#------------------------------------------------------------
part parent "m325"
desc = "ATmega3250A";
id = "m3250a";
mcuid = 147;
n_interrupts = 25;
signature = 0x1e 0x95 0x06;
;
#------------------------------------------------------------
# ATmega3250P
#------------------------------------------------------------
part parent "m325"
desc = "ATmega3250P";
id = "m3250p";
mcuid = 148;
n_interrupts = 25;
signature = 0x1e 0x95 0x0e;
;
#------------------------------------------------------------
# ATmega3250PA
#------------------------------------------------------------
part parent "m325"
desc = "ATmega3250PA";
id = "m3250pa";
mcuid = 149;
n_interrupts = 25;
signature = 0x1e 0x95 0x0e;
;
#------------------------------------------------------------
# ATmega6450
#------------------------------------------------------------
part parent "m645"
desc = "ATmega6450";
id = "m6450";
mcuid = 154;
n_interrupts = 25;
signature = 0x1e 0x96 0x06;
;
#------------------------------------------------------------
# ATmega6450A
#------------------------------------------------------------
part parent "m645"
desc = "ATmega6450A";
id = "m6450a";
mcuid = 155;
n_interrupts = 25;
signature = 0x1e 0x96 0x06;
;
#------------------------------------------------------------
# ATmega6450P
#------------------------------------------------------------
part parent "m645"
desc = "ATmega6450P";
id = "m6450p";
mcuid = 156;
n_interrupts = 25;
signature = 0x1e 0x96 0x0e;
;
#------------------------------------------------------------
# AVR XMEGA family common values
#------------------------------------------------------------
part
desc = "AVR XMEGA family common values";
id = ".xmega";
prog_modes = PM_SPM | PM_PDI;
mcu_base = 0x0090;
nvm_base = 0x01c0;
memory "fuse1"
size = 1;
offset = 0x8f0021;
;
memory "fuse2"
size = 1;
offset = 0x8f0022;
;
memory "fuse4"
size = 1;
offset = 0x8f0024;
;
memory "fuse5"
size = 1;
offset = 0x8f0025;
;
memory "lock"
size = 1;
offset = 0x8f0027;
;
memory "signature"
size = 3;
offset = 0x1000090;
;
memory "prodsig"
size = 50;
page_size = 50;
offset = 0x8e0200;
readsize = 50;
;
memory "data"
# SRAM, only used to supply the offset
offset = 0x1000000;
;
;
#------------------------------------------------------------
# ATxmega16A4U
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega16A4U";
id = "x16a4u";
mcuid = 232;
n_interrupts = 127;
signature = 0x1e 0x94 0x41;
usbpid = 0x2fe3;
memory "eeprom"
size = 1024;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x5000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x4000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 256;
offset = 0x803000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 256;
offset = 0x804000;
readsize = 256;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega16C4
#------------------------------------------------------------
part parent "x16a4u"
desc = "ATxmega16C4";
id = "x16c4";
mcuid = 233;
signature = 0x1e 0x94 0x43;
;
#------------------------------------------------------------
# ATxmega16D4
#------------------------------------------------------------
part parent "x16a4u"
desc = "ATxmega16D4";
id = "x16d4";
mcuid = 234;
n_interrupts = 91;
signature = 0x1e 0x94 0x42;
;
#------------------------------------------------------------
# ATxmega16A4
#------------------------------------------------------------
part parent "x16a4u"
desc = "ATxmega16A4";
id = "x16a4";
mcuid = 231;
n_interrupts = 94;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega32A4U
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega32A4U";
id = "x32a4u";
mcuid = 239;
n_interrupts = 127;
signature = 0x1e 0x95 0x41;
usbpid = 0x2fe4;
memory "eeprom"
size = 1024;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x9000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x8000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 256;
offset = 0x807000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 256;
offset = 0x808000;
readsize = 256;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega32C4
#------------------------------------------------------------
part parent "x32a4u"
desc = "ATxmega32C4";
id = "x32c4";
mcuid = 240;
signature = 0x1e 0x95 0x44;
;
#------------------------------------------------------------
# ATxmega32D4
#------------------------------------------------------------
part parent "x32a4u"
desc = "ATxmega32D4";
id = "x32d4";
mcuid = 241;
n_interrupts = 91;
signature = 0x1e 0x95 0x42;
;
#------------------------------------------------------------
# ATxmega32A4
#------------------------------------------------------------
part parent "x32a4u"
desc = "ATxmega32A4";
id = "x32a4";
mcuid = 238;
n_interrupts = 94;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega64A4U
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega64A4U";
id = "x64a4u";
mcuid = 252;
n_interrupts = 127;
signature = 0x1e 0x96 0x46;
usbpid = 0x2fe5;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x11000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x10000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 256;
offset = 0x80f000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 256;
offset = 0x810000;
readsize = 256;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega64C3
#------------------------------------------------------------
part parent "x64a4u"
desc = "ATxmega64C3";
id = "x64c3";
mcuid = 249;
signature = 0x1e 0x96 0x49;
usbpid = 0x2fd6;
;
#------------------------------------------------------------
# ATxmega64D3
#------------------------------------------------------------
part parent "x64a4u"
desc = "ATxmega64D3";
id = "x64d3";
mcuid = 250;
n_interrupts = 114;
signature = 0x1e 0x96 0x4a;
;
#------------------------------------------------------------
# ATxmega64D4
#------------------------------------------------------------
part parent "x64a4u"
desc = "ATxmega64D4";
id = "x64d4";
mcuid = 253;
n_interrupts = 91;
signature = 0x1e 0x96 0x47;
;
#------------------------------------------------------------
# ATxmega64A1
#------------------------------------------------------------
part parent "x64a4u"
desc = "ATxmega64A1";
id = "x64a1";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 243;
n_interrupts = 125;
signature = 0x1e 0x96 0x4e;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega64A1U
#------------------------------------------------------------
part parent "x64a1"
desc = "ATxmega64A1U";
id = "x64a1u";
mcuid = 244;
n_interrupts = 127;
usbpid = 0x2fe8;
;
#------------------------------------------------------------
# ATxmega64A3
#------------------------------------------------------------
part parent "x64a1"
desc = "ATxmega64A3";
id = "x64a3";
mcuid = 246;
n_interrupts = 122;
signature = 0x1e 0x96 0x42;
;
#------------------------------------------------------------
# ATxmega64A3U
#------------------------------------------------------------
part parent "x64a1"
desc = "ATxmega64A3U";
id = "x64a3u";
mcuid = 247;
n_interrupts = 127;
signature = 0x1e 0x96 0x42;
;
#------------------------------------------------------------
# ATxmega64A4
#------------------------------------------------------------
part parent "x64a1"
desc = "ATxmega64A4";
id = "x64a4";
mcuid = 251;
signature = 0x1e 0x96 0x46;
;
#------------------------------------------------------------
# ATxmega64B1
#------------------------------------------------------------
part parent "x64a1"
desc = "ATxmega64B1";
id = "x64b1";
mcuid = 245;
n_interrupts = 81;
signature = 0x1e 0x96 0x52;
usbpid = 0x2fe1;
;
#------------------------------------------------------------
# ATxmega64B3
#------------------------------------------------------------
part parent "x64a1"
desc = "ATxmega64B3";
id = "x64b3";
mcuid = 248;
n_interrupts = 54;
signature = 0x1e 0x96 0x51;
usbpid = 0x2fdf;
;
#------------------------------------------------------------
# ATxmega128C3
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega128C3";
id = "x128c3";
mcuid = 261;
n_interrupts = 127;
signature = 0x1e 0x97 0x52;
usbpid = 0x2fd7;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x22000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 512;
offset = 0x81e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x820000;
readsize = 256;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega128D3
#------------------------------------------------------------
part parent "x128c3"
desc = "ATxmega128D3";
id = "x128d3";
mcuid = 262;
n_interrupts = 114;
signature = 0x1e 0x97 0x48;
;
#------------------------------------------------------------
# ATxmega128D4
#------------------------------------------------------------
part parent "x128c3"
desc = "ATxmega128D4";
id = "x128d4";
mcuid = 265;
n_interrupts = 91;
signature = 0x1e 0x97 0x47;
memory "flash"
page_size = 256;
;
;
#------------------------------------------------------------
# ATxmega128A1
#------------------------------------------------------------
part parent "x128c3"
desc = "ATxmega128A1";
id = "x128a1";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 254;
n_interrupts = 125;
signature = 0x1e 0x97 0x4c;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega128A1 revision D
#------------------------------------------------------------
part parent "x128a1"
desc = "ATxmega128A1revD";
id = "x128a1d";
mcuid = 255;
signature = 0x1e 0x97 0x41;
;
#------------------------------------------------------------
# ATxmega128A1U
#------------------------------------------------------------
part parent "x128a1"
desc = "ATxmega128A1U";
id = "x128a1u";
mcuid = 256;
n_interrupts = 127;
usbpid = 0x2fed;
;
#------------------------------------------------------------
# ATxmega128A3
#------------------------------------------------------------
part parent "x128a1"
desc = "ATxmega128A3";
id = "x128a3";
mcuid = 258;
n_interrupts = 122;
signature = 0x1e 0x97 0x42;
;
#------------------------------------------------------------
# ATxmega128A3U
#------------------------------------------------------------
part parent "x128a1"
desc = "ATxmega128A3U";
id = "x128a3u";
mcuid = 259;
n_interrupts = 127;
signature = 0x1e 0x97 0x42;
usbpid = 0x2fe6;
;
#------------------------------------------------------------
# ATxmega128A4
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega128A4";
id = "x128a4";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 263;
signature = 0x1e 0x97 0x46;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x22000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 512;
offset = 0x81f000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x820000;
readsize = 256;
;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega128A4U
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega128A4U";
id = "x128a4u";
mcuid = 264;
n_interrupts = 127;
signature = 0x1e 0x97 0x46;
usbpid = 0x2fde;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x22000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x20000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 256;
offset = 0x81f000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 256;
offset = 0x820000;
readsize = 256;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega128B1
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega128B1";
id = "x128b1";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 257;
n_interrupts = 81;
signature = 0x1e 0x97 0x4d;
usbpid = 0x2fea;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x22000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x20000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 256;
offset = 0x81e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 256;
offset = 0x820000;
readsize = 256;
;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega128B3
#------------------------------------------------------------
part parent "x128b1"
desc = "ATxmega128B3";
id = "x128b3";
mcuid = 260;
n_interrupts = 54;
signature = 0x1e 0x97 0x4b;
usbpid = 0x2fe0;
;
#------------------------------------------------------------
# ATxmega192C3
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega192C3";
id = "x192c3";
mcuid = 269;
n_interrupts = 127;
signature = 0x1e 0x97 0x51;
# usbpid = 0x2f??;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x32000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x30000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 512;
offset = 0x82e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x830000;
readsize = 256;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega192D3
#------------------------------------------------------------
part parent "x192c3"
desc = "ATxmega192D3";
id = "x192d3";
mcuid = 270;
n_interrupts = 114;
signature = 0x1e 0x97 0x49;
;
#------------------------------------------------------------
# ATxmega192A1
#------------------------------------------------------------
part parent "x192c3"
desc = "ATxmega192A1";
id = "x192a1";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 266;
signature = 0x1e 0x97 0x4e;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega192A3
#------------------------------------------------------------
part parent "x192a1"
desc = "ATxmega192A3";
id = "x192a3";
mcuid = 267;
n_interrupts = 122;
signature = 0x1e 0x97 0x44;
;
#------------------------------------------------------------
# ATxmega192A3U
#------------------------------------------------------------
part parent "x192a1"
desc = "ATxmega192A3U";
id = "x192a3u";
mcuid = 268;
signature = 0x1e 0x97 0x44;
usbpid = 0x2fe7;
;
#------------------------------------------------------------
# ATxmega256C3
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega256C3";
id = "x256c3";
mcuid = 276;
n_interrupts = 127;
signature = 0x1e 0x98 0x46;
usbpid = 0x2fda;
memory "eeprom"
size = 4096;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x42000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x40000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 512;
offset = 0x83e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x840000;
readsize = 256;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega256D3
#------------------------------------------------------------
part parent "x256c3"
desc = "ATxmega256D3";
id = "x256d3";
mcuid = 277;
n_interrupts = 114;
signature = 0x1e 0x98 0x44;
;
#------------------------------------------------------------
# ATxmega256A1
#------------------------------------------------------------
part parent "x256c3"
desc = "ATxmega256A1";
id = "x256a1";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 271;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
;
#------------------------------------------------------------
# ATxmega256A3
#------------------------------------------------------------
part parent "x256a1"
desc = "ATxmega256A3";
id = "x256a3";
mcuid = 272;
n_interrupts = 122;
signature = 0x1e 0x98 0x42;
;
#------------------------------------------------------------
# ATxmega256A3U
#------------------------------------------------------------
part parent "x256a1"
desc = "ATxmega256A3U";
id = "x256a3u";
mcuid = 275;
signature = 0x1e 0x98 0x42;
usbpid = 0x2fec;
;
#------------------------------------------------------------
# ATxmega256A3B
#------------------------------------------------------------
part parent "x256a1"
desc = "ATxmega256A3B";
id = "x256a3b";
mcuid = 273;
n_interrupts = 122;
signature = 0x1e 0x98 0x43;
;
#------------------------------------------------------------
# ATxmega256A3BU
#------------------------------------------------------------
part parent "x256a1"
desc = "ATxmega256A3BU";
id = "x256a3bu";
mcuid = 274;
signature = 0x1e 0x98 0x43;
usbpid = 0x2fe2;
;
#------------------------------------------------------------
# ATxmega384C3
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega384C3";
id = "x384c3";
mcuid = 278;
n_interrupts = 127;
signature = 0x1e 0x98 0x45;
usbpid = 0x2fdb;
memory "eeprom"
size = 4096;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x62000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x60000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 512;
offset = 0x85e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x860000;
readsize = 256;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega384D3
#------------------------------------------------------------
part parent "x384c3"
desc = "ATxmega384D3";
id = "x384d3";
mcuid = 279;
n_interrupts = 114;
signature = 0x1e 0x98 0x47;
;
#------------------------------------------------------------
# ATxmega8E5
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega8E5";
id = "x8e5";
mcuid = 230;
n_interrupts = 43;
signature = 0x1e 0x93 0x41;
memory "eeprom"
size = 512;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x2800;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 8192;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 2048;
page_size = 128;
offset = 0x801800;
readsize = 256;
;
memory "boot"
size = 2048;
page_size = 128;
offset = 0x802000;
readsize = 256;
;
memory "usersig"
size = 128;
page_size = 128;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega16E5
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega16E5";
id = "x16e5";
mcuid = 235;
n_interrupts = 43;
signature = 0x1e 0x94 0x45;
memory "eeprom"
size = 512;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x5000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x4000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 128;
offset = 0x803000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 128;
offset = 0x804000;
readsize = 256;
;
memory "usersig"
size = 128;
page_size = 128;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# ATxmega32E5
#------------------------------------------------------------
part parent ".xmega"
desc = "ATxmega32E5";
id = "x32e5";
mcuid = 242;
n_interrupts = 43;
signature = 0x1e 0x95 0x4c;
memory "eeprom"
size = 1024;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x9000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x8000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 128;
offset = 0x807000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 128;
offset = 0x808000;
readsize = 256;
;
memory "usersig"
size = 128;
page_size = 128;
offset = 0x8e0400;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32UC3A0512
#------------------------------------------------------------
part
desc = "AT32UC3A0512";
id = "uc3a0512";
prog_modes = PM_AVR32JTAG | PM_aWire;
signature = 0xed 0xc0 0x3f;
memory "flash"
paged = yes;
size = 0x80000; # could be set dynamicly
page_size = 512; # bytes
num_pages = 1024; # could be set dynamicly
offset = 0x80000000;
readsize = 512; # bytes
;
;
#------------------------------------------------------------
# deprecated, use 'uc3a0512'
#------------------------------------------------------------
part parent "uc3a0512"
desc = "deprecated, use 'uc3a0512'";
id = "ucr2";
;
#------------------------------------------------------------
# ATtiny1634
#------------------------------------------------------------
part
desc = "ATtiny1634";
id = "t1634";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 40;
n_interrupts = 28;
n_page_erase = 4;
stk500_devcode = 0x86;
chip_erase_delay = 9000;
pagel = 0xb3;
bs2 = 0xb1;
# avr910_devcode = 0x??;
signature = 0x1e 0x94 0x12;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x26, 0x36, 0x66, 0x76, 0x2a, 0x3a, 0x6a, 0x7a,
0x2e, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
readback = 0xff 0xff;
mode = 65;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 32;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 65;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxi.iiii";
;
memory "lock"
size = 1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--1111.11ii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
;
#------------------------------------------------------------
# ATtiny1634R
#------------------------------------------------------------
part parent "t1634"
desc = "ATtiny1634R";
id = "t1634r";
mcuid = 41;
;
#------------------------------------------------------------
# Common values for reduced core tinys (4/5/9/10/20/40)
#------------------------------------------------------------
part
desc = "Common values for reduced core tinys";
id = ".reduced_core_tiny";
prog_modes = PM_TPI;
memory "fuse"
size = 1;
page_size = 16;
offset = 0x3f40;
blocksize = 4;
;
memory "lockbits"
size = 1;
page_size = 16;
offset = 0x3f00;
;
memory "lockbits"
size = 1;
page_size = 16;
offset = 0x3f00;
;
memory "signature"
size = 3;
page_size = 16;
offset = 0x3fc0;
;
memory "calibration"
size = 1;
page_size = 16;
offset = 0x3f80;
;
;
#------------------------------------------------------------
# ATtiny4
#------------------------------------------------------------
part parent ".reduced_core_tiny"
desc = "ATtiny4";
id = "t4";
mcuid = 0;
n_interrupts = 10;
signature = 0x1e 0x8f 0x0a;
memory "flash"
size = 512;
page_size = 16;
offset = 0x4000;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATtiny5
#------------------------------------------------------------
part parent "t4"
desc = "ATtiny5";
id = "t5";
mcuid = 1;
n_interrupts = 11;
signature = 0x1e 0x8f 0x09;
;
#------------------------------------------------------------
# ATtiny9
#------------------------------------------------------------
part parent ".reduced_core_tiny"
desc = "ATtiny9";
id = "t9";
mcuid = 2;
n_interrupts = 10;
signature = 0x1e 0x90 0x08;
memory "flash"
size = 1024;
page_size = 16;
offset = 0x4000;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATtiny10
#------------------------------------------------------------
part parent "t9"
desc = "ATtiny10";
id = "t10";
mcuid = 3;
n_interrupts = 11;
signature = 0x1e 0x90 0x03;
;
#------------------------------------------------------------
# ATtiny20
#------------------------------------------------------------
part parent ".reduced_core_tiny"
desc = "ATtiny20";
id = "t20";
mcuid = 4;
n_interrupts = 17;
signature = 0x1e 0x91 0x0f;
memory "flash"
size = 2048;
page_size = 16;
n_word_writes = 2;
offset = 0x4000;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATtiny40
#------------------------------------------------------------
part parent ".reduced_core_tiny"
desc = "ATtiny40";
id = "t40";
mcuid = 5;
n_interrupts = 18;
signature = 0x1e 0x92 0x0e;
memory "flash"
size = 4096;
page_size = 64;
n_word_writes = 4;
offset = 0x4000;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATtiny102
#------------------------------------------------------------
part parent ".reduced_core_tiny"
desc = "ATtiny102";
id = "t102";
mcuid = 6;
signature = 0x1e 0x90 0x0c;
memory "flash"
size = 1024;
page_size = 16;
offset = 0x4000;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATtiny104
#------------------------------------------------------------
part parent ".reduced_core_tiny"
desc = "ATtiny104";
id = "t104";
mcuid = 7;
signature = 0x1e 0x90 0x0b;
memory "flash"
size = 1024;
page_size = 16;
offset = 0x4000;
blocksize = 128;
;
;
#------------------------------------------------------------
# ATmega406
#------------------------------------------------------------
part
desc = "ATmega406";
id = "m406";
prog_modes = PM_SPM | PM_HVPP | PM_JTAG;
mcuid = 125;
n_interrupts = 23;
# STK500 parameters (parallel programming IO lines)
pagel = 0xa7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x07;
reset = io;
serial = no;
# STK500v2 HV programming parameters, from XML
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
idr = 0x51;
spmcr = 0x57;
eecr = 0x3f;
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
blocksize = 4;
readsize = 4;
;
memory "flash"
paged = yes;
size = 0xa000;
page_size = 128;
num_pages = 320;
blocksize = 128;
readsize = 128;
;
memory "lfuse"
size = 1;
;
memory "hfuse"
size = 1;
;
memory "lockbits"
size = 1;
;
memory "lockbits"
size = 1;
;
memory "signature"
size = 3;
;
;
#------------------------------------------------------------
# AVR8X family common values
#------------------------------------------------------------
part
desc = "AVR8X family common values";
id = ".avr8x";
prog_modes = PM_SPM | PM_UPDI;
nvm_base = 0x1000;
ocd_base = 0x0f80;
memory "fuse0"
size = 1;
offset = 0x1280;
readsize = 1;
;
memory "wdtcfg"
alias "fuse0";
;
memory "fuse1"
size = 1;
offset = 0x1281;
readsize = 1;
;
memory "bodcfg"
alias "fuse1";
;
memory "fuse2"
size = 1;
offset = 0x1282;
readsize = 1;
;
memory "osccfg"
alias "fuse2";
;
memory "fuse4"
size = 1;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "fuse5"
size = 1;
offset = 0x1285;
readsize = 1;
;
memory "syscfg0"
alias "fuse5";
;
memory "fuse6"
size = 1;
offset = 0x1286;
readsize = 1;
;
memory "syscfg1"
alias "fuse6";
;
memory "fuse7"
size = 1;
offset = 0x1287;
readsize = 1;
;
memory "append"
alias "fuse7";
;
memory "codesize"
alias "fuse7";
;
memory "fuse8"
size = 1;
offset = 0x1288;
readsize = 1;
;
memory "bootend"
alias "fuse8";
;
memory "bootsize"
alias "fuse8";
;
memory "fuses"
size = 9;
page_size = 10;
offset = 0x1280;
readsize = 10;
;
memory "lock"
size = 1;
offset = 0x128a;
readsize = 1;
;
memory "tempsense"
size = 2;
offset = 0x1120;
readsize = 1;
;
memory "signature"
size = 3;
offset = 0x1100;
readsize = 3;
;
memory "prodsig"
size = 61;
page_size = 61;
offset = 0x1103;
readsize = 61;
;
memory "sernum"
size = 10;
offset = 0x1104;
readsize = 1;
;
memory "osccal16"
size = 2;
offset = 0x1118;
readsize = 1;
;
memory "osccal20"
size = 2;
offset = 0x111a;
readsize = 1;
;
memory "osc16err"
size = 2;
offset = 0x1122;
readsize = 1;
;
memory "osc20err"
size = 2;
offset = 0x1124;
readsize = 1;
;
memory "data"
# SRAM, only used to supply the offset
offset = 0x1000000;
;
;
#------------------------------------------------------------
# AVR8X tiny family common values
#------------------------------------------------------------
part parent ".avr8x"
desc = "AVR8X tiny family common values";
id = ".avr8x_tiny";
family_id = "tinyAVR";
# Shared UPDI pin, HV on UPDI pin
hvupdi_variant = 0;
memory "userrow"
size = 32;
page_size = 32;
offset = 0x1300;
readsize = 256;
;
memory "usersig"
alias "userrow";
;
;
#------------------------------------------------------------
# AVR8X mega family common values
#------------------------------------------------------------
part parent ".avr8x"
desc = "AVR8X mega family common values";
id = ".avr8x_mega";
family_id = "megaAVR";
# Dedicated UPDI pin, no HV
hvupdi_variant = 1;
memory "userrow"
size = 64;
page_size = 64;
offset = 0x1300;
readsize = 256;
;
memory "usersig"
alias "userrow";
;
;
#------------------------------------------------------------
# ATtiny202
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny202";
id = "t202";
mcuid = 280;
n_interrupts = 26;
signature = 0x1e 0x91 0x23;
memory "eeprom"
size = 64;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 2048;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny204
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny204";
id = "t204";
mcuid = 281;
n_interrupts = 26;
signature = 0x1e 0x91 0x22;
memory "eeprom"
size = 64;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 2048;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny402
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny402";
id = "t402";
mcuid = 284;
n_interrupts = 26;
signature = 0x1e 0x92 0x27;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny404
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny404";
id = "t404";
mcuid = 285;
n_interrupts = 26;
signature = 0x1e 0x92 0x26;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny406
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny406";
id = "t406";
mcuid = 286;
n_interrupts = 26;
signature = 0x1e 0x92 0x25;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny804
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny804";
id = "t804";
mcuid = 295;
n_interrupts = 31;
signature = 0x1e 0x93 0x25;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny806
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny806";
id = "t806";
mcuid = 296;
n_interrupts = 31;
signature = 0x1e 0x93 0x24;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny807
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny807";
id = "t807";
mcuid = 297;
n_interrupts = 31;
signature = 0x1e 0x93 0x23;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1604
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1604";
id = "t1604";
mcuid = 304;
n_interrupts = 31;
signature = 0x1e 0x94 0x25;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1606
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1606";
id = "t1606";
mcuid = 305;
n_interrupts = 31;
signature = 0x1e 0x94 0x24;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1607
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1607";
id = "t1607";
mcuid = 306;
n_interrupts = 31;
signature = 0x1e 0x94 0x23;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny212
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny212";
id = "t212";
mcuid = 282;
n_interrupts = 26;
signature = 0x1e 0x91 0x21;
memory "eeprom"
size = 64;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 2048;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny214
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny214";
id = "t214";
mcuid = 283;
n_interrupts = 26;
signature = 0x1e 0x91 0x20;
memory "eeprom"
size = 64;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 2048;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny412
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny412";
id = "t412";
mcuid = 287;
n_interrupts = 26;
signature = 0x1e 0x92 0x23;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny414
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny414";
id = "t414";
mcuid = 288;
n_interrupts = 26;
signature = 0x1e 0x92 0x22;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny416
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny416";
id = "t416";
mcuid = 289;
n_interrupts = 26;
signature = 0x1e 0x92 0x21;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny417
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny417";
id = "t417";
mcuid = 291;
n_interrupts = 26;
signature = 0x1e 0x92 0x20;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny814
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny814";
id = "t814";
mcuid = 298;
n_interrupts = 26;
signature = 0x1e 0x93 0x22;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny816
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny816";
id = "t816";
mcuid = 299;
n_interrupts = 26;
signature = 0x1e 0x93 0x21;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny817
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny817";
id = "t817";
mcuid = 300;
n_interrupts = 26;
signature = 0x1e 0x93 0x20;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1614
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1614";
id = "t1614";
mcuid = 307;
n_interrupts = 31;
signature = 0x1e 0x94 0x22;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1616
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1616";
id = "t1616";
mcuid = 308;
n_interrupts = 31;
signature = 0x1e 0x94 0x21;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1617
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1617";
id = "t1617";
mcuid = 309;
n_interrupts = 31;
signature = 0x1e 0x94 0x20;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny3216
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny3216";
id = "t3216";
mcuid = 314;
n_interrupts = 31;
signature = 0x1e 0x95 0x21;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny3217
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny3217";
id = "t3217";
mcuid = 315;
n_interrupts = 31;
signature = 0x1e 0x95 0x22;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny424
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny424";
id = "t424";
mcuid = 292;
signature = 0x1e 0x92 0x2c;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny426
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny426";
id = "t426";
mcuid = 293;
signature = 0x1e 0x92 0x2b;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny427
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny427";
id = "t427";
mcuid = 294;
signature = 0x1e 0x92 0x2a;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny824
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny824";
id = "t824";
mcuid = 301;
signature = 0x1e 0x93 0x29;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny826
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny826";
id = "t826";
mcuid = 302;
signature = 0x1e 0x93 0x28;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny827
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny827";
id = "t827";
mcuid = 303;
signature = 0x1e 0x93 0x27;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1624
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1624";
id = "t1624";
mcuid = 310;
signature = 0x1e 0x94 0x2a;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1626
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1626";
id = "t1626";
mcuid = 311;
signature = 0x1e 0x94 0x29;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny1627
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny1627";
id = "t1627";
mcuid = 312;
signature = 0x1e 0x94 0x28;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny3224
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny3224";
id = "t3224";
mcuid = 316;
signature = 0x1e 0x95 0x28;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny3226
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny3226";
id = "t3226";
mcuid = 317;
signature = 0x1e 0x95 0x27;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATtiny3227
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATtiny3227";
id = "t3227";
mcuid = 318;
signature = 0x1e 0x95 0x26;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega808
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATmega808";
id = "m808";
mcuid = 319;
n_interrupts = 36;
signature = 0x1e 0x93 0x26;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x4000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega809
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATmega809";
id = "m809";
mcuid = 320;
n_interrupts = 40;
signature = 0x1e 0x93 0x2a;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x4000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega1608
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATmega1608";
id = "m1608";
mcuid = 321;
n_interrupts = 36;
signature = 0x1e 0x94 0x27;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x4000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega1609
#------------------------------------------------------------
part parent ".avr8x_tiny"
desc = "ATmega1609";
id = "m1609";
mcuid = 322;
n_interrupts = 40;
signature = 0x1e 0x94 0x26;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x4000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega3208
#------------------------------------------------------------
part parent ".avr8x_mega"
desc = "ATmega3208";
id = "m3208";
mcuid = 323;
n_interrupts = 36;
signature = 0x1e 0x95 0x30;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x4000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega3209
#------------------------------------------------------------
part parent ".avr8x_mega"
desc = "ATmega3209";
id = "m3209";
mcuid = 324;
n_interrupts = 40;
signature = 0x1e 0x95 0x31;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x4000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega4808
#------------------------------------------------------------
part parent ".avr8x_mega"
desc = "ATmega4808";
id = "m4808";
mcuid = 325;
n_interrupts = 36;
signature = 0x1e 0x96 0x50;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0xc000;
page_size = 128;
offset = 0x4000;
readsize = 256;
;
;
#------------------------------------------------------------
# ATmega4809
#------------------------------------------------------------
part parent ".avr8x_mega"
desc = "ATmega4809";
id = "m4809";
mcuid = 326;
n_interrupts = 40;
signature = 0x1e 0x96 0x51;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0xc000;
page_size = 128;
offset = 0x4000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR-Dx family common values
#------------------------------------------------------------
part
desc = "AVR-Dx family common values";
id = ".avrdx";
family_id = "AVR ";
prog_modes = PM_SPM | PM_UPDI;
# Dedicated UPDI pin, no HV
hvupdi_variant = 1;
nvm_base = 0x1000;
ocd_base = 0x0f80;
memory "fuse0"
size = 1;
offset = 0x1050;
readsize = 1;
;
memory "wdtcfg"
alias "fuse0";
;
memory "fuse1"
size = 1;
offset = 0x1051;
readsize = 1;
;
memory "bodcfg"
alias "fuse1";
;
memory "fuse2"
size = 1;
offset = 0x1052;
readsize = 1;
;
memory "osccfg"
alias "fuse2";
;
memory "fuse4"
size = 1;
offset = 0x1054;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "fuse5"
size = 1;
offset = 0x1055;
readsize = 1;
;
memory "syscfg0"
alias "fuse5";
;
memory "fuse6"
size = 1;
offset = 0x1056;
readsize = 1;
;
memory "syscfg1"
alias "fuse6";
;
memory "fuse7"
size = 1;
offset = 0x1057;
readsize = 1;
;
memory "codesize"
alias "fuse7";
;
memory "append"
alias "fuse7";
;
memory "fuse8"
size = 1;
offset = 0x1058;
readsize = 1;
;
memory "bootsize"
alias "fuse8";
;
memory "bootend"
alias "fuse8";
;
memory "fuses"
size = 9;
page_size = 16;
offset = 0x1050;
readsize = 16;
;
memory "lock"
size = 4;
offset = 0x1040;
readsize = 4;
;
memory "tempsense"
size = 2;
offset = 0x1104;
readsize = 1;
;
memory "signature"
size = 3;
offset = 0x1100;
readsize = 3;
;
memory "prodsig"
size = 125;
page_size = 125;
offset = 0x1103;
readsize = 125;
;
memory "sernum"
size = 16;
offset = 0x1110;
readsize = 1;
;
memory "userrow"
size = 32;
page_size = 32;
offset = 0x1080;
readsize = 32;
;
memory "usersig"
alias "userrow";
;
memory "data"
# SRAM, only used to supply the offset
offset = 0x1000000;
;
;
#------------------------------------------------------------
# AVR32DA28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DA28";
id = "avr32da28";
family_id = " AVR";
mcuid = 338;
signature = 0x1e 0x95 0x34;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DA32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DA32";
id = "avr32da32";
family_id = " AVR";
mcuid = 342;
signature = 0x1e 0x95 0x33;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DA48
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DA48";
id = "avr32da48";
family_id = " AVR";
mcuid = 346;
signature = 0x1e 0x95 0x32;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DA28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DA28";
id = "avr64da28";
family_id = " AVR";
mcuid = 351;
signature = 0x1e 0x96 0x15;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DA32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DA32";
id = "avr64da32";
family_id = " AVR";
mcuid = 355;
signature = 0x1e 0x96 0x14;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DA48
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DA48";
id = "avr64da48";
family_id = " AVR";
mcuid = 359;
signature = 0x1e 0x96 0x13;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DA64
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DA64";
id = "avr64da64";
family_id = " AVR";
mcuid = 362;
signature = 0x1e 0x96 0x12;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR128DA28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR128DA28";
id = "avr128da28";
family_id = " AVR";
mcuid = 364;
signature = 0x1e 0x97 0x0a;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR128DA32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR128DA32";
id = "avr128da32";
family_id = " AVR";
mcuid = 366;
signature = 0x1e 0x97 0x09;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR128DA48
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR128DA48";
id = "avr128da48";
family_id = " AVR";
mcuid = 368;
signature = 0x1e 0x97 0x08;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR128DA64
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR128DA64";
id = "avr128da64";
family_id = " AVR";
mcuid = 370;
signature = 0x1e 0x97 0x07;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DB28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DB28";
id = "avr32db28";
mcuid = 339;
signature = 0x1e 0x95 0x37;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DB32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DB32";
id = "avr32db32";
mcuid = 343;
signature = 0x1e 0x95 0x36;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DB48
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DB48";
id = "avr32db48";
mcuid = 347;
signature = 0x1e 0x95 0x35;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DB28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DB28";
id = "avr64db28";
mcuid = 352;
signature = 0x1e 0x96 0x19;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DB32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DB32";
id = "avr64db32";
mcuid = 356;
signature = 0x1e 0x96 0x18;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DB48
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DB48";
id = "avr64db48";
mcuid = 360;
signature = 0x1e 0x96 0x17;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DB64
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DB64";
id = "avr64db64";
mcuid = 363;
signature = 0x1e 0x96 0x16;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR128DB28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR128DB28";
id = "avr128db28";
mcuid = 365;
signature = 0x1e 0x97 0x0e;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR128DB32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR128DB32";
id = "avr128db32";
mcuid = 367;
signature = 0x1e 0x97 0x0d;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR128DB48
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR128DB48";
id = "avr128db48";
mcuid = 369;
signature = 0x1e 0x97 0x0c;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR128DB64
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR128DB64";
id = "avr128db64";
mcuid = 371;
signature = 0x1e 0x97 0x0b;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR16DD14
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR16DD14";
id = "avr16dd14";
mcuid = 329;
hvupdi_variant = 2;
signature = 0x1e 0x94 0x34;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR16DD20
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR16DD20";
id = "avr16dd20";
mcuid = 330;
hvupdi_variant = 2;
signature = 0x1e 0x94 0x33;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR16DD28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR16DD28";
id = "avr16dd28";
mcuid = 331;
hvupdi_variant = 2;
signature = 0x1e 0x94 0x32;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR16DD32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR16DD32";
id = "avr16dd32";
mcuid = 333;
hvupdi_variant = 2;
signature = 0x1e 0x94 0x31;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DD14
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DD14";
id = "avr32dd14";
mcuid = 336;
hvupdi_variant = 2;
signature = 0x1e 0x95 0x3b;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DD20
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DD20";
id = "avr32dd20";
mcuid = 337;
hvupdi_variant = 2;
signature = 0x1e 0x95 0x3a;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DD28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DD28";
id = "avr32dd28";
mcuid = 340;
hvupdi_variant = 2;
signature = 0x1e 0x95 0x39;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32DD32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR32DD32";
id = "avr32dd32";
mcuid = 344;
hvupdi_variant = 2;
signature = 0x1e 0x95 0x38;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DD14
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DD14";
id = "avr64dd14";
mcuid = 349;
hvupdi_variant = 2;
signature = 0x1e 0x96 0x1d;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DD20
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DD20";
id = "avr64dd20";
mcuid = 350;
hvupdi_variant = 2;
signature = 0x1e 0x96 0x1c;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DD28
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DD28";
id = "avr64dd28";
mcuid = 353;
hvupdi_variant = 2;
signature = 0x1e 0x96 0x1b;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64DD32
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR64DD32";
id = "avr64dd32";
mcuid = 357;
hvupdi_variant = 2;
signature = 0x1e 0x96 0x1a;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR-Ex family common values
#------------------------------------------------------------
part parent ".avrdx"
desc = "AVR-Ex family common values";
id = ".avrex";
# Shared UPDI pin, HV on _RESET
hvupdi_variant = 2;
memory "userrow"
size = 64;
page_size = 64;
readsize = 64;
;
memory "usersig"
alias "userrow";
;
;
#------------------------------------------------------------
# AVR8EA28
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR8EA28";
id = "avr8ea28";
mcuid = 327;
signature = 0x1e 0x93 0x2c;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR8EA32
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR8EA32";
id = "avr8ea32";
mcuid = 328;
signature = 0x1e 0x93 0x2b;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR16EA28
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR16EA28";
id = "avr16ea28";
mcuid = 332;
signature = 0x1e 0x94 0x37;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR16EA32
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR16EA32";
id = "avr16ea32";
mcuid = 334;
signature = 0x1e 0x94 0x36;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR16EA48
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR16EA48";
id = "avr16ea48";
mcuid = 335;
signature = 0x1e 0x94 0x35;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32EA28
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR32EA28";
id = "avr32ea28";
mcuid = 341;
signature = 0x1e 0x95 0x3e;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32EA32
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR32EA32";
id = "avr32ea32";
mcuid = 345;
signature = 0x1e 0x95 0x3d;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR32EA48
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR32EA48";
id = "avr32ea48";
mcuid = 348;
signature = 0x1e 0x95 0x3c;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64EA28
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR64EA28";
id = "avr64ea28";
mcuid = 354;
signature = 0x1e 0x96 0x20;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64EA32
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR64EA32";
id = "avr64ea32";
mcuid = 358;
signature = 0x1e 0x96 0x1f;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# AVR64EA48
#------------------------------------------------------------
part parent ".avrex"
desc = "AVR64EA48";
id = "avr64ea48";
mcuid = 361;
signature = 0x1e 0x96 0x1e;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
;
#------------------------------------------------------------
# Logic Green parts
#------------------------------------------------------------
part parent "m88"
desc = "LGT8F88P";
id = "lgt8f88p";
mcuid = 227;
signature = 0x1e 0x93 0x0f;
;
#------------------------------------------------------------
# LGT8F168P
#------------------------------------------------------------
part parent "m168"
desc = "LGT8F168P";
id = "lgt8f168p";
mcuid = 228;
signature = 0x1e 0x94 0x0b;
;
#------------------------------------------------------------
# LGT8F328P
#------------------------------------------------------------
part parent "m328"
desc = "LGT8F328P";
id = "lgt8f328p";
mcuid = 229;
signature = 0x1e 0x95 0x0f;
;