avrdude/ChangeLog

687 lines
20 KiB
Plaintext

2014-11-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
patch #8437: [PATCH] Serial-over-ethernet for Win32
* configure.ac: Check for ws2_32 library
* ser_win32.c: Add hooks for forwarding serial data over
TCP connections
* avrdude.1: Drop previous restriction of -P net:
* doc/avrdude.conf: (Dito.)
2014-11-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #42908: no external reset at JTAGICE3
* jtag3.c (jtag3_initialize): Retry with external reset applied if
the first sign-on attempt fails.
2014-11-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* main.c: Allow the -B option argument to be suffixed with Hz,
kHz, or MHz, in order to specify a bitclock frequency rather than
period.
* avrdude.1: Document the -B option changes.
* doc/avrdude.texi: (Dito.)
2014-11-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #40870: config nitpick: ATtiny25/45/85 have 1 calibration byte not 2
* avrdude.conf.in (ATtiny25, ATtiny45, ATtiny85): Fix size of
"calibration" memory area
2014-11-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #43137: Writing and reading incorrect pages when using jtagicemkI
* jtagmkI.c (jtagmkI_paged_write, jtagmkI_paged_load): correctly
calculate the size of a partial (non-pagesize) buffer
2014-11-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #43078: AVRDUDE crashes after sucessfully reading/writing eeprom
* jtag3.c (jtag3_edbg_recv_frame): Return correct length as
reported in the response packet, rather than full 512 byte which
are always reported by the CMSIS-DAP layer. Miscalculations
based on the wrongly reported length caused heap corruption
elsewhere, so this is presumably also a fix for bug #43078.
2014-11-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #41561: AVRDUDE 6.0.1/USBasp doesn't write first bytes of
flash page
* usbasp.c (usbasp_spi_paged_write): Remove USBASP_BLOCKFLAG_LAST.
It is no longer needed, as we always write full pages now in paged
write mode.
2014-11-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #43626: Inconsistent timeouts in stk500v2
* stk500v2.c (stk500v2_recv): Add a reference to the bug report
but don't change anything, lest to break it somehow
2014-11-14 Rene Liebscher <R.Liebscher@gmx.de>
patch #8529 2 more ftdi_syncbb devices
* avrdude.conf.in: added 2 new programmers
2014-11-14 Rene Liebscher <R.Liebscher@gmx.de>
bug #40142 Floating point exception on Ubuntu 10.04
* avr.c: avoid division by zero in report_progress(), eg. when
writing an empty eeprom file were total becomes 0
2014-11-13 Rene Liebscher <R.Liebscher@gmx.de>
patch #8504 buspirate: Also support "cpufreq" extended parameter
in binary mode
* buspirate.c: applied patch + switch off at disable (even when
a reset follows) + some general whitespace/tab cleanup
2014-10-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #37441: lockbits in ATxmega + avrdude = problem
* fileio.c: replace strmcp(..., "lock") by strncmp(..., "lock", 4)
where applicable
* jtag3.c: (Dito.)
* jtagmkII.c: (Dito.)
2014-10-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #42267: jtag3isp fails to read lock and fuse bytes directly
after changing lock byte
* stk500v2.c (stk500isp_write_byte): As a workaround for broken
tool firmware, add 10 ms of delay before returning from any
single-byte write operation.
2014-10-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* stk500v2.c: Use stk500isp_read_byte/stk500isp_write_byte for
every byte-wide access (rather than JTAGICE3 only). This finally
obsoletes the use of the prehistoric SPI_MULTI command where
AVRDUDE used to assemble all the low-level ISP stuff by itself.
2014-10-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #22248: Read efuse error
* avrdude.conf.in (m168, m328, m48, m88, t1634, t26, t261, t461,
t861, t88): In efuse (or hfuse for t26) read operation, turn all
bits in byte 3 from "x" to "o" (output); this is a first step
towards fixing the symptoms mentioned in the bug, by unifying the
behaviour between different AVRs. Not touched are the historic
devices where the fuses are not documented to form a full byte
each (2333, 4433, 4434, 8535, m103, m161, m163).
2014-09-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #43268: usb_drain() call causes LUFA AVR-ISP MKII Code to Fail
* usb_libusb.c (usbdev_drain): Make this a dummy function only.
2014-08-19 Rene Liebscher <R.Liebscher@gmx.de>
patch #7694 Add support for the atmega32m1
* avrdude.conf.in: added ATmega32M1
2014-08-18 Rene Liebscher <R.Liebscher@gmx.de>
patch #8440 Print part id after signature
When printing the part signature also print the part id.
* avrpart.c (locate_part_by_signature): New function.
* libavrdude.h (locate_part_by_signature): New function.
* main.c (main): Use the new function to find the part and print its id.
2014-08-18 Rene Liebscher <R.Liebscher@gmx.de>
patch #8511 Fix reset on FT245R
* ft245r.c: applied patch
2014-08-18 Rene Liebscher <R.Liebscher@gmx.de>
bug #43002 usbasp debug output typo
* usbasp.c: fixed typos
2014-07-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #42662 clang warnings under FreeBSD 10.x
* avrftdi.h: Fix header guard macro name.
* pgm_type.c (programmers_types): Remove duplicate "const".
2014-07-16 Rene Liebscher <R.Liebscher@gmx.de>
bug #42662 clang warnings under FreeBSD 10.x
* avrftdi.c: remove warnings
* buspirate.c: (Dito.)
* dfu.c: (Dito.)
* fileio.c: (Dito.)
* libavrdude.h: (Dito.)
* pickit2.c: (Dito.)
* safemode.c: (Dito.)
* ser_avrdoper.c: (Dito.)
* ser_posix.c: (Dito.)
* ser_win32.c: (Dito.)
* stk500v2.c: (Dito.)
* usb_libusb.c: (Dito.)
* usbasp.c: (Dito.)
* config_gram.y: fix problem when using parent part with usbpid lists
(existing list was extended not overwritten)
2014-07-11 Axel Wachtler <axel@uracoli.de>
* avrftdi.c: rollback to vfprintf, fixed error from -r1305, (patch #8463)
2014-06-23 Rene Liebscher <R.Liebscher@gmx.de>
* linux_ppdev.h: added missing msg level for avrdude_message
in ppi_claim/ppi_release macros
* avrftdi.c: added break at end of default
2014-06-21 Rene Liebscher <R.Liebscher@gmx.de>
patch #8419 fix ftdi_syncbb hang with libftdi 1
* ft245r.c: set pthread cancel type to asynchronous, reorder ftdi_usb_close/deinit
2014-06-17 Rene Liebscher <R.Liebscher@gmx.de>
* avrftdi_private.h: added missing msg level for avrdude_message
in E/E_VOID macros
2014-06-17 Rene Liebscher <R.Liebscher@gmx.de>
Removing exit calls from config parser
* config.h: cleanup, left only internally needed definitions
* config.c: removed exit calls, use yyerror and yywarning
* config_gram.y: (Dito.)
* lexer.l: (Dito.)
* libavrdude.h: removed internal definitions of config parser
* main.c: removed yyerror, it is now in config.c
* jtagmkII.c: added missing free in error case
* pgm.c: replaced exits by returns
* pickit2.c: add missing return
2014-06-13 Axel Wachtler <axel@uracoli.de>
start removing global "verbose" variable, for avrdude library.
* arduino.c: added verbose level in avrdude_message()
* avr910.c: (Dito.)
* avr.c: (Dito.)
* avrdude.h: (Dito.)
* avrftdi.c: (Dito.)
* avrpart.c: (Dito.)
* bitbang.c: (Dito.)
* buspirate.c: (Dito.)
* butterfly.c: (Dito.)
* config.c: (Dito.)
* config_gram.y: (Dito.)
* dfu.c: (Dito.)
* fileio.c: (Dito.)
* flip1.c: (Dito.)
* flip2.c: (Dito.)
* ft245r.c: (Dito.)
* jtag3.c: (Dito.)
* jtagmkI.c: (Dito.)
* jtagmkII.c: (Dito.)
* lexer.l: (Dito.)
* libavrdude.h: (Dito.)
* linuxgpio.c: (Dito.)
* main.c: (Dito.)
* par.c: (Dito.)
* pgm.c: (Dito.)
* pickit2.c: (Dito.)
* pindefs.c: (Dito.)
* ppi.c: (Dito.)
* ppiwin.c: (Dito.)
* safemode.c: (Dito.)
* ser_avrdoper.c: (Dito.)
* serbb_posix.c: (Dito.)
* serbb_win32.c: (Dito.)
* ser_posix.c: (Dito.)
* ser_win32.c: (Dito.)
* stk500.c: (Dito.)
* stk500generic.c: (Dito.)
* stk500v2.c: (Dito.)
* term.c: (Dito.)
* update.c: (Dito.)
* usbasp.c: (Dito.)
* usb_libusb.c: (Dito.)
* usbtiny.c: (Dito.)
* wiring.c: (Dito.)
2014-06-11 Rene Liebscher <R.Liebscher@gmx.de>
bug #42516 spelling-error-in-binary
* stk500v2.c, avrftdi.c, usbasp.c: fixed spelling errors
2014-06-01 Rene Liebscher <R.Liebscher@gmx.de>
bug #42337 avrdude.conf updates for UM232H/CM232H
* avrdude.conf.in: fixed entries as proposed
2014-05-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #41854: avrdude 6.1 does not compile on systems without libUSB
Submitted by Didrik Madheden:
* flip1.c: Provide dummy functions for the #ifndef HAVE_LIBUSB case
* flip2.c: (Dito.)
2014-05-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* libavrdude.h: Join the former "public" header files (avr.h avrpart.h pindefs.h
serial.h fileio.h safemode.h update.h pgm_type.h config.h confwin.h lists.h) into
a single header that can be included by anyone wanting to link against the
library
* avr.h: Remove file.
* avrpart.h: (Dito.)
* pindefs.h: (Dito.)
* serial.h: (Dito.)
* fileio.h: (Dito.)
* safemode.h: (Dito.)
* update.h: (Dito.)
* pgm.h: (Dito.)
* pgm_type.h: (Dito.)
* config.h: (Dito.)
* confwin.h: (Dito.)
* lists.h: (Dito.)
* Makefile.am: Adapt for new include file constellation; install shared lib
* configure.ac: Bump version date
* arduino.c: #include <libavrdude.h> rather than a bunch of different headers
* avr910.c: (Dito.)
* avr910.h: (Dito.)
* avr.c: (Dito.)
* avrftdi.c: (Dito.)
* avrftdi_private.h: (Dito.)
* avrftdi_tpi.c: (Dito.)
* avrftdi_tpi.h: (Dito.)
* avr.h: (Dito.)
* avrpart.c: (Dito.)
* avrpart.h: (Dito.)
* bitbang.c: (Dito.)
* buspirate.c: (Dito.)
* butterfly.c: (Dito.)
* config.c: (Dito.)
* config_gram.y: (Dito.)
* config.h: (Dito.)
* confwin.c: (Dito.)
* confwin.h: (Dito.)
* dfu.c: (Dito.)
* fileio.c: (Dito.)
* fileio.h: (Dito.)
* flip1.c: (Dito.)
* flip1.h: (Dito.)
* flip2.c: (Dito.)
* flip2.h: (Dito.)
* ft245r.c: (Dito.)
* ft245r.h: (Dito.)
* jtag3.c: (Dito.)
* jtagmkI.c: (Dito.)
* jtagmkII.c: (Dito.)
* lexer.l: (Dito.)
* libavrdude.h: (Dito.)
* linuxgpio.c: (Dito.)
* lists.c: (Dito.)
* lists.h: (Dito.)
* main.c: (Dito.)
* par.c: (Dito.)
* pgm.c: (Dito.)
* pgm_type.c: (Dito.)
* pgm_type.h: (Dito.)
* pickit2.c: (Dito.)
* pickit2.h: (Dito.)
* pindefs.c: (Dito.)
* pindefs.h: (Dito.)
* ppi.c: (Dito.)
* ppiwin.c: (Dito.)
* safemode.c: (Dito.)
* safemode.h: (Dito.)
* ser_avrdoper.c: (Dito.)
* serbb_posix.c: (Dito.)
* serbb_win32.c: (Dito.)
* serial.h: (Dito.)
* ser_posix.c: (Dito.)
* ser_win32.c: (Dito.)
* stk500.c: (Dito.)
* stk500generic.c: (Dito.)
* stk500v2.c: (Dito.)
* stk500v2_private.h: (Dito.)
* term.c: (Dito.)
* term.h: (Dito.)
* update.c: (Dito.)
* update.h: (Dito.)
* usbasp.c: (Dito.)
* usbasp.h: (Dito.)
* usb_libusb.c: (Dito.)
* usbtiny.c: (Dito.)
* usbtiny.h: (Dito.)
* wiring.c: (Dito.)
2014-05-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* main.c: Cleanup unused include files.
2014-05-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* linux_ppdev.h: Caught two more instances of exit()
* configure.ac: Add AC_CONFIG_MACRO_DIR as suggested by libtoolize
* Makefile.am: add -I m4 to ACLOCAL_AMFLAGS as suggested by libtoolize
2014-05-16 Axel Wachtler <axel@uracoli.de>
* arduino.c: Replacing all occurences of fprintf(stderr,...) with avrdude_message(...)
in potential library functions.
* avr910.c: (Dito.)
* avr.c: (Dito.)
* avrdude.h: (Dito.)
* avrftdi.c: (Dito.)
* avrftdi_private.h: (Dito.)
* avrpart.c: (Dito.)
* bitbang.c: (Dito.)
* buspirate.c: (Dito.)
* butterfly.c: (Dito.)
* config.c: (Dito.)
* config_gram.y: (Dito.)
* dfu.c: (Dito.)
* fileio.c: (Dito.)
* flip1.c: (Dito.)
* flip2.c: (Dito.)
* ft245r.c: (Dito.)
* jtag3.c: (Dito.)
* jtagmkI.c: (Dito.)
* jtagmkII.c: (Dito.)
* lexer.l: (Dito.)
* linuxgpio.c: (Dito.)
* linux_ppdev.h: (Dito.)
* main.c: (Dito.)
* par.c: (Dito.)
* pgm.c: (Dito.)
* pickit2.c: (Dito.)
* pindefs.c: (Dito.)
* ppi.c: (Dito.)
* ppiwin.c: (Dito.)
* safemode.c: (Dito.)
* ser_avrdoper.c: (Dito.)
* serbb_posix.c: (Dito.)
* serbb_win32.c: (Dito.)
* ser_posix.c: (Dito.)
* ser_win32.c: (Dito.)
* stk500.c: (Dito.)
* stk500generic.c: (Dito.)
* stk500v2.c: (Dito.)
* term.c: (Dito.)
* update.c: (Dito.)
* usbasp.c: (Dito.)
* usb_libusb.c: (Dito.)
* usbtiny.c: (Dito.)
* wiring.c: (Dito.)
2014-05-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac: Bump version, add libtool hooks
* Makefile.am: First attempt to define building a shared library
(not to be installed by now)
2014-05-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* dfu.c (dfu_open, dfu_init): Fix signature of the dummy functions
(in the !HAVE_LIBUSB case) to match prototypes.
2014-05-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avr910.c: Replace all occurences of exit() in potential library
functions by appropriate return values
* avrftdi.c: (Dito.)
* bitbang.c: (Dito.)
* bitbang.h: (Dito.)
* buspirate.c: (Dito.)
* butterfly.c: (Dito.)
* config.c: (Dito.)
* flip2.c: (Dito.)
* ft245r.c: (Dito.)
* jtagmkI.c: (Dito.)
* jtagmkII.c: (Dito.)
* linuxgpio.c: (Dito.)
* main.c: (Dito.)
* par.c: (Dito.)
* pgm.c: (Dito.)
* pickit2.c: (Dito.)
* pindefs.c: (Dito.)
* pindefs.h: (Dito.)
* ser_avrdoper.c: (Dito.)
* ser_posix.c: (Dito.)
* ser_win32.c: (Dito.)
* serbb_posix.c: (Dito.)
* serbb_win32.c: (Dito.)
* stk500.c: (Dito.)
* stk500v2.c: (Dito.)
2014-05-07 Rene Liebscher <R.Liebscher@gmx.de>
bug #42310: New part description for AT90PWM216
* avrdude.conf.in: added pwm216 entry
2014-05-07 Rene Liebscher <R.Liebscher@gmx.de>
bug #42158: Linux GPIO - Source Typo
* pindefs.h: fixed typo
2014-04-14 Rene Liebscher <R.Liebscher@gmx.de>
bug #42056: double free or corruption triggered at exit
* pgm.c: copy usbpid list in pgm_dup
2014-04-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.1: Remove the note that users might edit the system-wide
config file. This file will be overwritten by the next
installation, so it's not a good idea to manually modify it.
Using the -C +file option is a much better way for user
modifications.
* doc/avrdude.texi: (Dito.)
* avrdude.conf.in: Add a warning to not modify the file manually.
2014-03-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac (AC_INIT): Bump version for post-6.1.
2014-03-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac (AC_INIT): Bump version to 6.1.
2014-03-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* pgm.c (pgm_free): Cleanup police: destroy the p->usbpid
list when freeing the programmer struct.
2014-03-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
bug #40782: Verify errors for object size > 16 k on x32e5 due
to typo in avrdude.conf
* avrdude.conf.in (ATmega8E5, ATmega32E5): fix boot location
2014-02-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.conf.in (atmelice, atmelice_pdi, atmelice_dw, atmelice_isp):
New entries.
* avrdude.1: Document the Atmel-ICE addition.
* doc/avrdude.texi: (Dito.)
* usbdevs.c (USB_DEVICE_ATMEL_ICE): New entry.
2014-02-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* main.c: Bump copyright year.
2014-02-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* jtag3.c (jtag3_recv): avoid memmov'ing more data than available
2014-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.1: Documentation update for EDBG.
* doc/avrdude.texi: (Dito.)
2014-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* jtag3.c: For EDBG protocol, always use 512-byte block I/O. The
lower layers will split this according to the EP's maxsize. This
makes it work over USB 1.1 connections (albeit very slowly, due to
the interrupt transfers used).
2014-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* config_gram.y: Turn the usbpid parameter of the programmer into
a list of PIDs. Make the JTAGICE3 programmer handle a list of
PIDs, by trying each of them in sequence. Use a single, central
jtag3_open_common() function to handle the common code of all
jtag3_open_* functions. Centralize all USB VID/PID definitions in
usbdevs.h.
* flip1.c: (Dito.)
* ft245r.c: (Dito.)
* stk500v2.c: (Dito.)
* jtag3.c: (Dito.)
* jtag3.h: (Dito.)
* flip2.c: (Dito.)
* usbdevs.h: (Dito.)
* pgm.c: (Dito.)
* serial.h: (Dito.)
* pgm.h: (Dito.)
* usbtiny.c: (Dito.)
* usbasp.c: (Dito.)
* avrftdi.c: (Dito.)
* usbtiny.h: (Dito.)
* avrdude.conf.in: (Dito.)
* usbasp.h: (Dito.)
* usb_libusb.c: (Dito.)
2014-02-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* usb_libusb.c (usbdev_open): Replace all calls to exit(1) by
return -1
2014-02-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* jtag3_private.h: Add EDBG/CMSIS-DAP specific constants.
* jtag3.c: Add EDBG/CMSIS-DAP protocol implementation.
* serial.h: (Dito.)
* usbdevs.h: (Dito.)
* usb_libusb.c: (Dito.)
* configure.ac: (Dito.)
* avrdude.conf.in: Add JTAGICE3 and XplainedPro entries using
EDBG.
* configure.ac: Bump version date.
2014-02-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* usb_libusb.c (usbdev_recv_frame): Fix a bug where a new recv
request was issued even though all desired data had aldready
been received.
2014-02-21 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* serial.h: Change the second parameter of the ser_open method
from "baud" into a "union pinfo", so the USB parameters can be
passed without hacks.
* arduino.c: (Dito.)
* avr910.c: (Dito.)
* buspirate.c: (Dito.)
* butterfly.c: (Dito.)
* jtag3.c: (Dito.)
* jtagmkI.c: (Dito.)
* jtagmkII.c: (Dito.)
* ser_avrdoper.c: (Dito.)
* ser_posix.c: (Dito.)
* ser_win32.c: (Dito.)
* stk500.c: (Dito.)
* stk500v2.c: (Dito.)
* usb_libusb.c: (Dito.)
* wiring.c: (Dito.)
2014-01-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
[bug #41402] dfu.c missing include <stdint.h>
* dfu.c: include <stdint.h> where uint16_t is defined
2014-01-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* avrdude.conf.in (ATmega256RFR2 et al.): Fix EEPROM size.
2014-01-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
[bug #41357] OS X: Avrdude messes with the usb stack?
* usb_libusb.c (usbdev_close): Only issue the usb_reset() for
Linux systems, as these are the only ones that seem to require
it under some circumstances.
2014-01-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac (libelf): check against elf_getshdrstrndx() rather
than just elf_begin() only, so it is clear we found a sufficiently
recent libelf to work with.
2014-01-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Contributed by Alan Horstmann:
bug #40897: AT Mega2560 not correctly programmed with stk500(v1) ISP (solution patch)
* stk500.c: Implement extended address byte handling.
* avrdude.conf.in (ATmega2560): enable stk500_devcode so
STK500v1 protocol actually starts at all.
2014-01-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip1.c: Implement the meat of FLIP version 1 protocol.
* avrdude.1: Document the new protocol.
* doc/avrdude.texi: (Dito.)
2014-01-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip2.c (flip2_page_erase): Remove unimplemented function.
* dfu.h: Correctly conditionalize <usb.h> vs. <lusb0_usb.h>;
add adjustable timeout (struct dfu_dev); add dfu_abort()
* dfu.c (dfu_abort): New function; implement adjustable timeout.
2014-01-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* configure.ac (libhid): Turn from AC_TRY_RUN into
AC_TRY_COMPILE, so it also works for cross-compilation
setups.
2014-01-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* dfu.c (dfu_init): Move the descriptor checks up into the
FLIP protocol implementation.
* flip2.c (flip2_initialize): (Dito.)
* flip1.c (flip1_initialize): (Dito.)
2014-01-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip2.c: Rename from flip.c
* flip2.h: Rename from flip.h
* Makefile.am: Reflect the renaming.
* dfu.c: Update information how to get GPL.
* dfu.h: (Dito.)
2014-01-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip.c (flip2_initialize): Check user is running on an Xmega
device.
2014-01-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* flip.c: Added some verbose-level messages (-vv)
* dfu.c: Added some verbose-level messages (-vvvv)
2014-01-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
Submitted by Kirill Levchenko:
patch #7896: DFU FLIPv2 programming support
* pgm_type.c: Add the flip2 programmer type.
* config_gram.y: Allow for the usbid keyword in a device definition.
* avrdude.conf.in: Add usbpid values to those Xmega devices where
applicable.
* avrpart.h: Add usbpid device field.
* dfu.c: (New file.)
* dfu.h: (New file.)
* flip.c: (New file.)
* flip.h: (New file.)
* Makefile.am: Add new files.
* doc/avrdude.texi: Document the changes.
* avrdude.1: (Dito.)
2014-01-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
* ChangeLog-2013: Annual changelog rotation.