256 lines
8.7 KiB
Plaintext
256 lines
8.7 KiB
Plaintext
2021-11-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
* linuxspi.c: Use -B <bitclock> rather than -b <baudrate>
|
|
to specify the clock rate
|
|
|
|
2021-11-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Improve defaults and documentation of linuxspi
|
|
* avrdude.conf.in: use @HAVE_LINUXGPIO_BEGIN/END@ and
|
|
@HAVE_LINUXSPI_BEGIN/END@ brackets around respective config
|
|
snippets; values were already set in configure.ac.
|
|
* linuxspi.c (linuxspi_open): Provide a reasonable (for the
|
|
Raspberry Pi) default for the -P option
|
|
* avrdude.1: Extend linuxspi documentation
|
|
* doc/avrdude.texi: (Dito.)
|
|
|
|
2021-11-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Alex Sverdlin:
|
|
patch #10031: linuxspi: Support GPIO uAPI v2
|
|
* linuxspi.c (linuxspi_reset_mcu, linuxspi_open): Since Linux
|
|
v5.10 GPIO ABI Version 1 is optional and depends on
|
|
CONFIG_GPIO_CDEV_V1.
|
|
|
|
2021-11-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Alex Sverdlin:
|
|
patch #10030: linuxspi: Support inverted GPIO pin
|
|
* linuxspi.c (linuxspi_open): Clear the inversion mask on request
|
|
and set default state to avoid short glitches on the GPIO line.
|
|
|
|
2021-11-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Alex Sverdlin:
|
|
patch #10029: linuxspi: Report GPIO_GET_LINEHANDLE_IOCTL errors
|
|
* linuxspi.c (linuxspi_open): Report ioctl error
|
|
|
|
2021-11-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Alex Sverdlin:
|
|
patch #10028: linuxspi: close() only when necessary
|
|
* linuxspi.c: unify descriptor closing
|
|
|
|
2021-11-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Alex Sverdlin:
|
|
patch #10027: linuxspi: Add reset pulse, according to AVR programming algorithm
|
|
* linuxspi.c (linuxspi_open, linuxspi_program_enable):
|
|
movw out reset code into linuxspi_reset_mcu()
|
|
|
|
2021-11-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by David Mosberger-Tang:
|
|
patch #9328: ft245r.c: add TPI support (patches 5-7)
|
|
* ft245r.c (ft245r_set_bitclock): add workaround for
|
|
FT245 hardware bugs in bitclock setting
|
|
|
|
2021-11-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by David Mosberger-Tang:
|
|
patch #9328: ft245r.c: add TPI support (patches 5-7)
|
|
* ft245r.c: Remove the reader thread (also removes
|
|
patch #9079)
|
|
|
|
2021-11-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by David Mosberger-Tang:
|
|
patch #9327: ft245r.c: add TPI support (patches 1-4)
|
|
* ft245r.c (set_pin, ft245r_open): use
|
|
ft245r_send_and_discard() so ft245r_in can go away
|
|
|
|
2021-11-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by David Mosberger-Tang:
|
|
patch #9327: ft245r.c: add TPI support (patches 1-4)
|
|
* ft245r.c (ft245r_recv): Optimize TPI programming
|
|
speed by reducing number of USB reads.
|
|
|
|
2021-11-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by David Mosberger-Tang:
|
|
patch #9327: ft245r.c: add TPI support (patches 1-4)
|
|
* ft245r.c (ft245r_open): add call to
|
|
ftdi_set_latency_timer() to improve timing
|
|
|
|
2021-11-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by David Mosberger-Tang:
|
|
patch #9327: ft245r.c: add TPI support (patches 1-4)
|
|
* ft245r.c: add TPI support
|
|
* avrdude.conf.in (tc2030): New programmer
|
|
|
|
2021-11-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
* ft245r.c (ft245r_open): allow for picking a default
|
|
device if none has been provided by -P
|
|
|
|
2021-11-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
* jtag3.c (jtag3_edbg_recv_frame): Better handling for
|
|
fragment_info == 0x00 (no response available)
|
|
|
|
2021-11-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
* jtag3.c: Use matches() instead of strncmp()
|
|
|
|
2021-11-23 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
patch #9757: Fix ATtiny817 Xplained Mini programmer
|
|
* jtag3.c (jtag3_getsync, jtag3_close): correctly extract
|
|
programmer name from list of names
|
|
|
|
2021-11-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by David Sainty:
|
|
patch #8719: Support Over-the-Air bootloading with XBeeBoot
|
|
* xbee.c: New programmer
|
|
* xbee.h: (Dito.)
|
|
* pgm_type.c: Add xbee.h
|
|
* avrdude.conf.in (xbee): New programmer
|
|
* Makefile.am (libavrdude_a_SOURCES): add xbee.c, xbee.h
|
|
* avrdude.1: document the new programmer
|
|
* doc/avrdude.texi: (Dito.)
|
|
|
|
2021-11-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Ivan Frederiks:
|
|
patch #9079: Fix ftdi_syncbb teardown (supersedes #9893)
|
|
patch #9122: Fixed MISO sampling in ftdi_syncbb
|
|
patch #9123: ftdi_syncbb: use FT245R_CYCLES in ft245r_set_bitclock()
|
|
* ft245r.c: Various fixes for FT245-bitbang programmers
|
|
|
|
2021-11-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by David Mosberger-Tang:
|
|
patch #9320: fix TPI RESET in bitbang.c
|
|
* bitbang.c (bitbang_initialize): wait for 128 ms after deasserting
|
|
/RESET (per datasheet), and keep /RESET low during MOSI/MISO link check
|
|
|
|
2021-11-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Jon Thacker:
|
|
patch #9253: Fix for giving terminal_mode commands more than 20 arguments
|
|
* term.c (tokenize): fix realloc usage, pointer returned not necessarily
|
|
the same as pointer passed
|
|
|
|
2021-11-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Martino Facchin:
|
|
patch #9110: Let reserved fuse bits to be read as *don't care*
|
|
* avr.c (compare_memory_masked): New function
|
|
* libavrdude.h: declare compare_memory_masked(); also, insist on C99
|
|
so <stdint.h> is required now
|
|
* main.c: Use compare_memory_masked() in safemode comparisons
|
|
|
|
2021-11-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Joseph Coffland:
|
|
patch #8957: Allow reading prodsig memory from stk500v2 on xmega devices
|
|
* stk500v2.c (stk600_xprog_read_byte, stk600_xprog_paged_load):
|
|
treat "prodsig" memory space as equivalent to "calibration"
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Martin Thierer:
|
|
patch #10017: uspasp / tpi: Automatically clear configuration byte (fuse) before writing it
|
|
* usbasp.c (usbasp_tpi_paged_write): clear fuse region before writing it
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Michael Petersen:
|
|
patch #9697: Add iseavrprog support
|
|
* avrdude.conf.in (iseavrprog): New programmer
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
bug #50630: Erase Cycle Counter options ( -y -Y n ) should be removed from usage Message
|
|
* main.c (usage): remove -y / -Y descriptions
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
* avrdude.conf.in (ATmega8A): new device (alias for ATmega8)
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
bug #50517: Reading fails if "immediate mode" for output file format is selected - fileio: invalid operation=1
|
|
* update.c (do_op): refuse to write to "immediate format" argument
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Martin Thierer:
|
|
bug #60863: avrftdi programming error probably caused by multiple, consecutive empty pages
|
|
* avrftdi.c (avrftdi_flash_write): Skip empty pages
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Matwey V. Kornilov:
|
|
bug #58495: Add atmega324pb support to avrdude.conf.in
|
|
* avrdude.conf.in (ATmega324PB): new entry
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
bug #55734: USBtiny programming of ATmega328p broken by Patch #9278
|
|
* usbtiny.c (usbtiny_initialize): undo change from patch #9728
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
bug #55009: no efuses for m164a/pa
|
|
* avrdude.conf.in (ATmega164P): derive from ATmega324P
|
|
|
|
2021-11-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by evan Venn:
|
|
bug #59227: Add new part. How does one get a part added to the CONF file?
|
|
* avrdude.conf.in (LGT8FX88P, LGT8FX168P, LGT8FX328P): new parts
|
|
|
|
2021-11-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Britton Kerin:
|
|
bug #57453: [PATCH] fix reference to nonexistant -m option by changing to -U
|
|
* avrdude.1: replace -m option by -U
|
|
|
|
2021-11-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Andrew D'Addesio:
|
|
bug #58078: [PATCH] buspirate: remove compound literals (fixes GCC>=9)
|
|
* buspirate.c (buspirate_start_mode_bin):
|
|
avoid propagating local scope compound literals
|
|
|
|
2021-11-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by Jan Egil Ruud:
|
|
patch #10000: Add support for extended UPDI device context
|
|
* avrdude.conf.in (pickit4_updi, snap_updi, pkobn_updi):
|
|
new programmers
|
|
* avrdude.conf.in (ATmega808, ATmega809, ATmega1608, ATmega1609)
|
|
(AVR DA, AVR DB): new devices
|
|
* jtag3.c: Add support for extended UPDI device context
|
|
* jtag3_private.h: (Dito.)
|
|
* tools/atdf-to-avrdude.xslt: Bug fixes
|
|
* usbdevs.h: Bump USBDEV_MAX_XFER_3 to 912
|
|
* doc/avrdude.texi: Document changes
|
|
* avrdude.1: (Dito)
|
|
|
|
2021-06-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
bug #60753: Patch #1436 breaks multiple programmer/device combinations on MacOS BigSur
|
|
* avr.c: compare page_size > 1 instead of != 0
|
|
* stk500v2.c: (Ditto.)
|
|
|
|
2021-06-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de>
|
|
|
|
Submitted by gerardoallende:
|
|
bug #59525: Bogus error message because Copy/Paste typo in stk500.c
|
|
* stk500.c (stk500_getparm): Fix bogus ID in error message
|