330 lines
12 KiB
C
330 lines
12 KiB
C
//**** ATMEL AVR - A P P L I C A T I O N N O T E ************************
|
|
//*
|
|
//* Title: AVR068 - STK500 Communication Protocol
|
|
//* Filename: command.h
|
|
//* Version: 1.0
|
|
//* Last updated: 10.01.2005
|
|
//*
|
|
//* Support E-mail: avr@atmel.com
|
|
//*
|
|
//**************************************************************************
|
|
|
|
#include "pgm.h"
|
|
|
|
// *****************[ STK message constants ]***************************
|
|
|
|
#define MESSAGE_START 0x1B //= ESC = 27 decimal
|
|
#define TOKEN 0x0E
|
|
|
|
// *****************[ STK general command constants ]**************************
|
|
|
|
#define CMD_SIGN_ON 0x01
|
|
#define CMD_SET_PARAMETER 0x02
|
|
#define CMD_GET_PARAMETER 0x03
|
|
#define CMD_SET_DEVICE_PARAMETERS 0x04
|
|
#define CMD_OSCCAL 0x05
|
|
#define CMD_LOAD_ADDRESS 0x06
|
|
#define CMD_FIRMWARE_UPGRADE 0x07
|
|
#define CMD_CHECK_TARGET_CONNECTION 0x0D
|
|
#define CMD_LOAD_RC_ID_TABLE 0x0E
|
|
#define CMD_LOAD_EC_ID_TABLE 0x0F
|
|
|
|
|
|
// *****************[ STK ISP command constants ]******************************
|
|
|
|
#define CMD_ENTER_PROGMODE_ISP 0x10
|
|
#define CMD_LEAVE_PROGMODE_ISP 0x11
|
|
#define CMD_CHIP_ERASE_ISP 0x12
|
|
#define CMD_PROGRAM_FLASH_ISP 0x13
|
|
#define CMD_READ_FLASH_ISP 0x14
|
|
#define CMD_PROGRAM_EEPROM_ISP 0x15
|
|
#define CMD_READ_EEPROM_ISP 0x16
|
|
#define CMD_PROGRAM_FUSE_ISP 0x17
|
|
#define CMD_READ_FUSE_ISP 0x18
|
|
#define CMD_PROGRAM_LOCK_ISP 0x19
|
|
#define CMD_READ_LOCK_ISP 0x1A
|
|
#define CMD_READ_SIGNATURE_ISP 0x1B
|
|
#define CMD_READ_OSCCAL_ISP 0x1C
|
|
#define CMD_SPI_MULTI 0x1D /* STK500v2, AVRISPmkII,
|
|
* JTAGICEmkII */
|
|
#define CMD_SET_SCK 0x1D /* JTAGICE3 */
|
|
#define CMD_GET_SCK 0x1E /* JTAGICE3 */
|
|
|
|
// *****************[ STK PP command constants ]*******************************
|
|
|
|
#define CMD_ENTER_PROGMODE_PP 0x20
|
|
#define CMD_LEAVE_PROGMODE_PP 0x21
|
|
#define CMD_CHIP_ERASE_PP 0x22
|
|
#define CMD_PROGRAM_FLASH_PP 0x23
|
|
#define CMD_READ_FLASH_PP 0x24
|
|
#define CMD_PROGRAM_EEPROM_PP 0x25
|
|
#define CMD_READ_EEPROM_PP 0x26
|
|
#define CMD_PROGRAM_FUSE_PP 0x27
|
|
#define CMD_READ_FUSE_PP 0x28
|
|
#define CMD_PROGRAM_LOCK_PP 0x29
|
|
#define CMD_READ_LOCK_PP 0x2A
|
|
#define CMD_READ_SIGNATURE_PP 0x2B
|
|
#define CMD_READ_OSCCAL_PP 0x2C
|
|
|
|
#define CMD_SET_CONTROL_STACK 0x2D
|
|
|
|
// *****************[ STK HVSP command constants ]*****************************
|
|
|
|
#define CMD_ENTER_PROGMODE_HVSP 0x30
|
|
#define CMD_LEAVE_PROGMODE_HVSP 0x31
|
|
#define CMD_CHIP_ERASE_HVSP 0x32
|
|
#define CMD_PROGRAM_FLASH_HVSP 0x33
|
|
#define CMD_READ_FLASH_HVSP 0x34
|
|
#define CMD_PROGRAM_EEPROM_HVSP 0x35
|
|
#define CMD_READ_EEPROM_HVSP 0x36
|
|
#define CMD_PROGRAM_FUSE_HVSP 0x37
|
|
#define CMD_READ_FUSE_HVSP 0x38
|
|
#define CMD_PROGRAM_LOCK_HVSP 0x39
|
|
#define CMD_READ_LOCK_HVSP 0x3A
|
|
#define CMD_READ_SIGNATURE_HVSP 0x3B
|
|
#define CMD_READ_OSCCAL_HVSP 0x3C
|
|
// These two are redefined since 0x30/0x31 collide
|
|
// with the STK600 bootloader.
|
|
#define CMD_ENTER_PROGMODE_HVSP_STK600 0x3D
|
|
#define CMD_LEAVE_PROGMODE_HVSP_STK600 0x3E
|
|
|
|
// *** XPROG command constants ***
|
|
|
|
#define CMD_XPROG 0x50
|
|
#define CMD_XPROG_SETMODE 0x51
|
|
|
|
|
|
// *** AVR32 JTAG Programming command ***
|
|
|
|
#define CMD_JTAG_AVR32 0x80
|
|
#define CMD_ENTER_PROGMODE_JTAG_AVR32 0x81
|
|
#define CMD_LEAVE_PROGMODE_JTAG_AVR32 0x82
|
|
|
|
|
|
// *** AVR JTAG Programming command ***
|
|
|
|
#define CMD_JTAG_AVR 0x90
|
|
|
|
// *****************[ STK test command constants ]***************************
|
|
|
|
#define CMD_ENTER_TESTMODE 0x60
|
|
#define CMD_LEAVE_TESTMODE 0x61
|
|
#define CMD_CHIP_WRITE 0x62
|
|
#define CMD_PROGRAM_FLASH_PARTIAL 0x63
|
|
#define CMD_PROGRAM_EEPROM_PARTIAL 0x64
|
|
#define CMD_PROGRAM_SIGNATURE_ROW 0x65
|
|
#define CMD_READ_FLASH_MARGIN 0x66
|
|
#define CMD_READ_EEPROM_MARGIN 0x67
|
|
#define CMD_READ_SIGNATURE_ROW_MARGIN 0x68
|
|
#define CMD_PROGRAM_TEST_FUSE 0x69
|
|
#define CMD_READ_TEST_FUSE 0x6A
|
|
#define CMD_PROGRAM_HIDDEN_FUSE_LOW 0x6B
|
|
#define CMD_READ_HIDDEN_FUSE_LOW 0x6C
|
|
#define CMD_PROGRAM_HIDDEN_FUSE_HIGH 0x6D
|
|
#define CMD_READ_HIDDEN_FUSE_HIGH 0x6E
|
|
#define CMD_PROGRAM_HIDDEN_FUSE_EXT 0x6F
|
|
#define CMD_READ_HIDDEN_FUSE_EXT 0x70
|
|
|
|
// *****************[ STK status constants ]***************************
|
|
|
|
// Success
|
|
#define STATUS_CMD_OK 0x00
|
|
|
|
// Warnings
|
|
#define STATUS_CMD_TOUT 0x80
|
|
#define STATUS_RDY_BSY_TOUT 0x81
|
|
#define STATUS_SET_PARAM_MISSING 0x82
|
|
|
|
// Errors
|
|
#define STATUS_CMD_FAILED 0xC0
|
|
#define STATUS_CKSUM_ERROR 0xC1
|
|
#define STATUS_CMD_UNKNOWN 0xC9
|
|
#define STATUS_CMD_ILLEGAL_PARAMETER 0xCA
|
|
|
|
// Status
|
|
#define STATUS_ISP_READY 0x00
|
|
#define STATUS_CONN_FAIL_MOSI 0x01
|
|
#define STATUS_CONN_FAIL_RST 0x02
|
|
#define STATUS_CONN_FAIL_SCK 0x04
|
|
#define STATUS_TGT_NOT_DETECTED 0x10
|
|
#define STATUS_TGT_REVERSE_INSERTED 0x20
|
|
|
|
// hw_status
|
|
// Bits in status variable
|
|
// Bit 0-3: Slave MCU
|
|
// Bit 4-7: Master MCU
|
|
|
|
#define STATUS_AREF_ERROR 0
|
|
// Set to '1' if AREF is short circuited
|
|
|
|
#define STATUS_VTG_ERROR 4
|
|
// Set to '1' if VTG is short circuited
|
|
|
|
#define STATUS_RC_CARD_ERROR 5
|
|
// Set to '1' if board id changes when board is powered
|
|
|
|
#define STATUS_PROGMODE 6
|
|
// Set to '1' if board is in programming mode
|
|
|
|
#define STATUS_POWER_SURGE 7
|
|
// Set to '1' if board draws excessive current
|
|
|
|
// *****************[ STK parameter constants ]***************************
|
|
#define PARAM_BUILD_NUMBER_LOW 0x80 /* ??? */
|
|
#define PARAM_BUILD_NUMBER_HIGH 0x81 /* ??? */
|
|
#define PARAM_HW_VER 0x90
|
|
#define PARAM_SW_MAJOR 0x91
|
|
#define PARAM_SW_MINOR 0x92
|
|
#define PARAM_VTARGET 0x94
|
|
#define PARAM_VADJUST 0x95 /* STK500 only */
|
|
#define PARAM_OSC_PSCALE 0x96 /* STK500 only */
|
|
#define PARAM_OSC_CMATCH 0x97 /* STK500 only */
|
|
#define PARAM_SCK_DURATION 0x98 /* STK500 only */
|
|
#define PARAM_TOPCARD_DETECT 0x9A /* STK500 only */
|
|
#define PARAM_STATUS 0x9C /* STK500 only */
|
|
#define PARAM_DATA 0x9D /* STK500 only */
|
|
#define PARAM_RESET_POLARITY 0x9E /* STK500 only, and STK600 FW
|
|
* version <= 2.0.3 */
|
|
#define PARAM_CONTROLLER_INIT 0x9F
|
|
|
|
/* STK600 parameters */
|
|
#define PARAM_STATUS_TGT_CONN 0xA1
|
|
#define PARAM_DISCHARGEDELAY 0xA4
|
|
#define PARAM_SOCKETCARD_ID 0xA5
|
|
#define PARAM_ROUTINGCARD_ID 0xA6
|
|
#define PARAM_EXPCARD_ID 0xA7
|
|
#define PARAM_SW_MAJOR_SLAVE1 0xA8
|
|
#define PARAM_SW_MINOR_SLAVE1 0xA9
|
|
#define PARAM_SW_MAJOR_SLAVE2 0xAA
|
|
#define PARAM_SW_MINOR_SLAVE2 0xAB
|
|
#define PARAM_BOARD_ID_STATUS 0xAD
|
|
#define PARAM_RESET 0xB4
|
|
|
|
#define PARAM_JTAG_ALLOW_FULL_PAGE_STREAM 0x50
|
|
#define PARAM_JTAG_EEPROM_PAGE_SIZE 0x52
|
|
#define PARAM_JTAG_DAISY_BITS_BEFORE 0x53
|
|
#define PARAM_JTAG_DAISY_BITS_AFTER 0x54
|
|
#define PARAM_JTAG_DAISY_UNITS_BEFORE 0x55
|
|
#define PARAM_JTAG_DAISY_UNITS_AFTER 0x56
|
|
|
|
// *** Parameter constants for 2 byte values ***
|
|
#define PARAM2_SCK_DURATION 0xC0
|
|
#define PARAM2_CLOCK_CONF 0xC1
|
|
#define PARAM2_AREF0 0xC2
|
|
#define PARAM2_AREF1 0xC3
|
|
|
|
#define PARAM2_JTAG_FLASH_SIZE_H 0xC5
|
|
#define PARAM2_JTAG_FLASH_SIZE_L 0xC6
|
|
#define PARAM2_JTAG_FLASH_PAGE_SIZE 0xC7
|
|
#define PARAM2_RC_ID_TABLE_REV 0xC8
|
|
#define PARAM2_EC_ID_TABLE_REV 0xC9
|
|
|
|
/* STK600 XPROG section */
|
|
// XPROG modes
|
|
#define XPRG_MODE_PDI 0
|
|
#define XPRG_MODE_JTAG 1
|
|
#define XPRG_MODE_TPI 2
|
|
|
|
// XPROG commands
|
|
#define XPRG_CMD_ENTER_PROGMODE 0x01
|
|
#define XPRG_CMD_LEAVE_PROGMODE 0x02
|
|
#define XPRG_CMD_ERASE 0x03
|
|
#define XPRG_CMD_WRITE_MEM 0x04
|
|
#define XPRG_CMD_READ_MEM 0x05
|
|
#define XPRG_CMD_CRC 0x06
|
|
#define XPRG_CMD_SET_PARAM 0x07
|
|
|
|
// Memory types
|
|
#define XPRG_MEM_TYPE_APPL 1
|
|
#define XPRG_MEM_TYPE_BOOT 2
|
|
#define XPRG_MEM_TYPE_EEPROM 3
|
|
#define XPRG_MEM_TYPE_FUSE 4
|
|
#define XPRG_MEM_TYPE_LOCKBITS 5
|
|
#define XPRG_MEM_TYPE_USERSIG 6
|
|
#define XPRG_MEM_TYPE_FACTORY_CALIBRATION 7
|
|
|
|
// Erase types
|
|
#define XPRG_ERASE_CHIP 1
|
|
#define XPRG_ERASE_APP 2
|
|
#define XPRG_ERASE_BOOT 3
|
|
#define XPRG_ERASE_EEPROM 4
|
|
#define XPRG_ERASE_APP_PAGE 5
|
|
#define XPRG_ERASE_BOOT_PAGE 6
|
|
#define XPRG_ERASE_EEPROM_PAGE 7
|
|
#define XPRG_ERASE_USERSIG 8
|
|
#define XPRG_ERASE_CONFIG 9 // TPI only, prepare fuse write
|
|
|
|
// Write mode flags
|
|
#define XPRG_MEM_WRITE_ERASE 0
|
|
#define XPRG_MEM_WRITE_WRITE 1
|
|
|
|
// CRC types
|
|
#define XPRG_CRC_APP 1
|
|
#define XPRG_CRC_BOOT 2
|
|
#define XPRG_CRC_FLASH 3
|
|
|
|
// Error codes
|
|
#define XPRG_ERR_OK 0
|
|
#define XPRG_ERR_FAILED 1
|
|
#define XPRG_ERR_COLLISION 2
|
|
#define XPRG_ERR_TIMEOUT 3
|
|
|
|
// XPROG parameters of different sizes
|
|
// 4-byte address
|
|
#define XPRG_PARAM_NVMBASE 0x01
|
|
// 2-byte page size
|
|
#define XPRG_PARAM_EEPPAGESIZE 0x02
|
|
// 1-byte, undocumented TPI param
|
|
#define XPRG_PARAM_TPI_3 0x03
|
|
// 1-byte, undocumented TPI param
|
|
#define XPRG_PARAM_TPI_4 0x04
|
|
|
|
// *****************[ STK answer constants ]***************************
|
|
|
|
#define ANSWER_CKSUM_ERROR 0xB0
|
|
|
|
/*
|
|
* Private data for this programmer.
|
|
*/
|
|
struct pdata
|
|
{
|
|
/*
|
|
* See stk500pp_read_byte() for an explanation of the flash and
|
|
* EEPROM page caches.
|
|
*/
|
|
unsigned char *flash_pagecache;
|
|
unsigned long flash_pageaddr;
|
|
unsigned int flash_pagesize;
|
|
|
|
unsigned char *eeprom_pagecache;
|
|
unsigned long eeprom_pageaddr;
|
|
unsigned int eeprom_pagesize;
|
|
|
|
unsigned char command_sequence;
|
|
|
|
enum
|
|
{
|
|
PGMTYPE_UNKNOWN,
|
|
PGMTYPE_STK500,
|
|
PGMTYPE_AVRISP,
|
|
PGMTYPE_AVRISP_MKII,
|
|
PGMTYPE_JTAGICE_MKII,
|
|
PGMTYPE_STK600,
|
|
PGMTYPE_JTAGICE3
|
|
}
|
|
pgmtype;
|
|
|
|
AVRPART *lastpart;
|
|
|
|
/* Start address of Xmega boot area */
|
|
unsigned long boot_start;
|
|
|
|
/*
|
|
* Chained pdata for the JTAG ICE mkII backend. This is used when
|
|
* calling the backend functions for ISP/HVSP/PP programming
|
|
* functionality of the JTAG ICE mkII and AVR Dragon.
|
|
*/
|
|
void *chained_pdata;
|
|
};
|
|
|